Customization and configuration

what is the difference between customization and configuration? give me out the details ...

Hi Chander
Many use these two terms interchangeably. I normally use as follows:
COnfiguration : If you use the IMG options provided by SAP (in Txn SPRO) to setup required settings for a business scenario, that is just configuring various parameters to suit your requirement.
If the above configuration settings provided by SAP are not sufficient for your business requirements, you may enhance the SAP standard functions using BADI/USER Exit or by coding additional transactions. This is customization.
Best regards
Ramki

Similar Messages

Difference between customization and configuration

Hi Sir's
Could i know difference between customization and configuration as well as validation and substitution
Thanks
Edited by: manjusap36 on Oct 22, 2009 7:23 PM

Hi,
The difference between cutomizing and configuration is:
- CONFIGURATION: we will configure the system to meet the needs of your business by using the existing data.
- CUSTOMIZING: we will customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process.
Moreover:
Configuration: Attaching to process flow to the existing one
Customization: Adding new fields/Tables as per client requirements. to customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process. It involves code changes to create functionality that is not available through configuration. Customization can be costly and can complicate future upgrades to the software because the code changes/modifications may not easily migrate to the new version.
Regards
Devi

Difference between customizing and configuration?

Is there any Difference between customizing and configuration?

Hi Rajesh,
What is Client? What is the difference between Customization and Configuration?
The difference between cutomizing and configuration is:
- CONFIGURATION: we will configure the system to meet the needs of your business by using the existing data.
- CUSTOMIZING: we will customise or adapt the system to your business requirements, which is the process of mapping SAP to your business process.
- CLIENT: A client is a unique one in organizational structure, can have one or more company codes. Each company code is its own legal entity in finance.
Configuration vs. Customization
When considering enterprise software of any type, it is important to understand the difference between configuration and customization.The crux of the difference is complexity. Configuration uses the inherent flexibility of the enterprise software to add fields, change field names,modify drop-down lists, or add buttons. Configurations are made using powerful built-in tool sets. Customization involves code changes to create functionality that is not available through configuration. Customization can be costly and can complicate future upgrades to the software because the code changes may not easily migrate to the new version.Wherever possible, governments should avoid customization by using configuration to meet their goals.Governments also should understand their vendor's particular terminology with regard to this issue since words like "modifications" or "extensions" often mean different things to different vendors.
Reg,
Ashok

Customizatuon and configuration

hI sap gurus,
What is the major diff b/w Customization and Configuration.

hi,
Configuration vs. Customization
When considering enterprise software of any type, it is important to understand the difference between configuration and customization. The crux of the difference is complexity. Configuration uses the inherent flexibility of the enterprise software to add fields, change field names, modify drop-down lists, or add buttons. Configurations are made using powerful built-in tool sets. Customization involves code changes to create functionality that is not available through configuration. Customization can be costly and can complicate future upgrades to the software because the code changes may not easily migrate to the new version. Wherever possible, governments should avoid customization by using configuration to meet their goals. Governments also should understand their vendor's particular terminology with regard to this issue since words like "modifications" or "extensions" often mean different things to different vendors.
And Most Important thing is configuration always will come first then customization.
CONFIGURATION:
1. Configuration is everything else done in SPRO.
2. Configuration is what u do from the existing one in sap.
Ex: assigning pricing procedure PR00 for a material.
3. When installing SAP on any system. thats configuration.
4. Configuration means using the standard SAP functionality & mapping to the clients process
CUSTOMIZATION:
1. Customizing is modification of the software to meet special customer requirements.
Changes or additions to ABAP code.
2. Customization is the changes needed for the existing SAP to meet the business
Requirement.
Ex: creating a new pricing procedure which is not existing in the SAP.
3. Modifications according to business requirement is customization.
4. Customization means modifying the standard SAP for client requirement, it is costly &
Time taken.
CHAN

Install and configuration on the SharePoint server 2007 issue

Hi All,
           I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
          I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM      cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
      Echo Deactivating LiveCycle Connector feature with WSS
      %STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Deactivating LiveCycle Workflow feature with WSS
      %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
      Echo Uninstalling LiveCycle Connector with WSS
      %STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
      Echo Uninstalling LiveCycle Workflow with WSS
      %STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
      Echo Copying source files to WSS \TEMPLATE directory
      xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
      Echo Copying Feature Resource files to WSS 12\Resources directory
      xcopy Resources %RESOURCESDIR% /e /y /i
      Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
      xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
      Echo Installing LiveCycle Connector with WSS
      %STSADM% -o installfeature -filename LiveCycle\feature.xml -force
      Echo Installing LiveCycle Workflow with WSS
      %STSADM% -o installfeature -name LiveCycle/Workflow -force
      Echo Activating LiveCycle Connector with WSS
      %STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Activating LiveCycle Workflow with WSS
      %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
      Echo Restarting IIS worker process
      IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol Sahare

This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

Customization and business process behind NRAB (free goods) condition type.

Hi Experts,
I am currently working on SAP DSD development. and for pricing procedure we are using ZCPB10 (beverage kalkulation).
There is a condition type maintained NRAB for free goods .I had seen many threads explaining the concept behind it.
But i am clueless about the customization and business process behind it.
Can someone help me in customizing by giving an example ,so it would be very helpful for me to use .
Regards
Chinmaya

Hi Lakshmi.
The business process is pretty clear.We are selling 10 beer cans to the customer and charging for 8.So basically we need to get inclusive free goods.As per my understanding without going to free goods we can achieve this by NRAB condition type in our pricing procedure.
So the point is how can i set it up or what is the configuration behind NRAB condition type so that it can act in our pricing procedure.

Customization and Enhancment of ICSS B2B 5.0 (Java )

Hi,
I have to customize and enhance the functionality of CRM 5.0 ICSS B2B web front end.
i studied the ISA50DevExtGuideConcepts21.pdf document,according to the document i am using NWDS for development.
I am following the below mentioned methodology.
1 > Downloaded NWDS 7.0
2> Configured the NWDS to point to remote j2ee engine
      (WindowPreferencesSAP J2ee Engine
        Message server host
        Message Server Port )
3> Got the latest source code i.e sap.comcrmicsswebicss_b2b.war
     extracted the source code.
4> created An Enterprise Application Project
5> Created Web Module Project
6> Added the created Web Module Project into the Enterprise Application Project
7> Followed the 1017761 note to deploy the standard application with different   name
8> Generated the custom_app.ear file.(J2EE Explorer Perspective)
9> Deployed the application using NWDS deploy option.(J2EE Explorer Perspective custom_app.earright click u will have option for deploy onto j2ee engine--asks SDM password)
when i try to access the deployed custom application using
http://host:port/custom_app/init.do
i am getting the following error
Application error occurred during request processing.
Details:   Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.].
Exception id: [0014C265B0070079000006E900006B000004310E29004C31]
when i access the http://host:port/custom_appt/admin/index.jsp
i am getting an empty Menu page .no links for XCM admin
SAP support suggested me to apply the patch.my java stack is at SP11 and
in sync with 979884 note patch also.
but still getting the error.
here my question is am i following proper methodology or u find any gaps in the procedure.
i studied in the ISA50DevExtGuideConcepts21.pdf some where they said
about the enabling the debugging and about DTR ,if find any details do let me know asap.
thanks
Suresh

Hi Pranay
If you are checking this mail.
I have the same problem, and I also have SAP-CRMDIC 5.0 SP6 (1000.5.0.6.0.20060914084317) deployed. Could you please advise why am I not able to see XCM config? or the whole of the admin.
I am using my custom application and deployed the ear through NWDS.
Points Gurenteed.
Thanks
Gaurav Sahai

How to Install and Configure BRM Adapter in SOA

Hi All,
We are Doing Customization for AIA 2.5 Comms PIP. We need a BRM Adapter is there any info how to install and configure BRM Adapter.
Thanks,
RR

Check infodoc 80544.. Its available at sunsolve.sun.com .
.7/M.

Need advise on Installation and Configuration NWDI frame work.

Our SAP R/3 is 4.6C and here at nVidia we are very new to SAP Netweaver world, we have already implemented EP 6.0 and XI on NW04 SP 13 and we are very close to go production.
Going forward we are planning to implement ESS, MSS, xRPM 4.0, CRM 5.0 with some customization to use the features like Guided Procedures(workflow capabilities outside of R/3), Composite Application Framework, Mobile Infrastructure for Help Request, workflow, myCRM etc. Apart from this, our custom developed intranet runs on .NET and some day it will move into SAP EP.
We are currently planning on building our Development Infrastructure (i.e. SLD->NWDI-> Dev->Qa->Prod) to implement above mentioned new product with some customization.
Currently our EP6 and XI are on NW04 SP 13, but we heard that Guided Procedures, Composite Application Framework only works with SAP NetWeaver 2004s and Mobile Infrastructure need Dual stack (ABAP + Java addin).
So we are currently little confused on how to build our development infrastrucre to support above products and any advise is highly appreciated.
1. Should the Development, Congregate, QA, Production machines have WAS 6.4 J2EE or WAS 6.4 with (ABAP + Java Addin) to support both custom java & ABAP development, at this point we are only planning on developing/customizing Java based apps/components.
2. We also need to Install Mobile Infrastructure, so should our MI go on top of Development, Congregate, QA, Production machines, in which case it needs to be WAS 6.4 with (ABAP + Java Addin) and not just J2EE stack, because MI needs both stacks Or should the MI be on its own boxes and configured to connect to NWDI servers.
3. We heard that Guided Procedures, Composite Application Framework only works on net weaver 2004s, in which case should our development infrastructure be build on net weaver 2004s or NW04 SP 13.
4, If we go with NW04 SP 13, will there be a path to upgrade to net weaver 2004s so that we can implement Guided Procedures, Composite Application at a later point.
5. How will net weaver 2004s work with our current EP & XI infrastructure which run on WAS 6.4 sp13
Once again your help is appreciated.
-Shivpal Reddy
[email protected]

Hi,
I'd say - Stick to your plan and configure all InternalURLs to be the same as the ExternalURL, the name you have in your certificate. The same goes for AutodiscoverServiceInternalUri. The key is to have Split DNS set up
See: http://support.microsoft.com/kb/940726
That is what most people do, even the one that can add their internal FQDN name to the certificate.
Understanding Digital Certificates and SSL
http://technet.microsoft.com/en-us/library/dd351044(v=exchg.141).aspx
Martina Miskovic

Diff b/w alert Categories and configurations

Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.

Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa

I have LabView but I do not have the Calibration and Configuration Palette,and I could not download it, how can I download it or if i cannot,can I work with the NI-DAQ Calibration_1200?

I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers

If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin

How to properly create and configure SharePoint 2013 Search service with PowerShell?

Hello Forum,
I have installed SharePoint 2013 across three tier servers:
WFE Server (Of course, SharePoint is installed here. Bsically this is just a Web server)
APP Server (Of course, SharePoint is installed here + Central Admin + Service Apps).
SQL Server
I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
script?
2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
3) How can I modify the script to specify a default Search center?
4) Apart from all the three aforementioned point - Is the script missing anything?
I would greatly appreciate your inputs - Thanks !

the only differences are where you place the components. if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
the app server. just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities.
generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers. also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
Disk for index, etc, etc), and making sure the topology works for your particular environment and needs.
if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

VCenter SRM Installation and Configuration

Hello,
We have installed and configured SRM 5.5.1 in Main site and DR site. In DR site we have two hosts and no shared storage.
Each have one vsphere replication appliance deployed and both the sites connected and we have also replicated two virtual machines successfully.
Next step we have configured protection group and recovery plan as well.
But when we test a recovery plan it gives a error "unable to access virtual machine configuration file"
Is it necessary we must have a shared storage? Can't we use local datastore on each host to power on the machines.
Regards
Karthik

Hi,
No, shared storage is not required:
Array/ vendor types
Requires same storage replication solution at both sites (eg. EMC RecoverPoint, NetApp vFiler, IBM SVC, etc)
Can support any storage solution at either end including local storage as long as it is covered by the vSphere HCL
SRM - Array Based Replication vs. vSphere Replication | VMware vSphere Blog - VMware Blogs
Michael.

Ibase and configuration error while creating a Service Contract

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Customization and configuration

Similar Messages

Maybe you are looking for