Customize the legend of a pie graph to show only one series

Is there a way to show only one series in the legend though the pie graph displays more than one series?
Any help is greatly appreciated
Thanks
KK

Here is an example that changes the scale of a graph. I think it is what you are looking for. Post back if it is not.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]
Attachments:
Update_graph_scale.vi ‏40 KB

Similar Messages

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

I added a custom ringtone . Then later I tried to add another three set but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

HT4623 I already have ios 7.0 installed in my iphone 4S. Although the size of ios 7.0.2 shows only a few MB, but when i click update using from my itunes it shows it is downloading 1.19GB. Why is this ? Do i have to download 1.19 GB?

I already have ios 7.0 installed in my iphone 4S. Although the size of ios 7.0.2 shows only a few MB, but when i click update using from my itunes it shows it is downloading 1.19GB. Why is this ? Do i have to download 1.19 GB?

If you update using iTunes, the full iOS is downloaded. If you update directly on your phone, this is called a "Delta" update, & only the changes to the iOS are downloaded. That's why you see the difference you see.

How to resolve error 'The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted'

One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William Hickson

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

Suppress empty legend/group in pie graph

Hi,
I've created a pie graph using BAM datacontrol.
In the pie graph, the legend area shows an extra empty group.
For eg. in the pie graph if there are 3 slices : High,Medium & Low, then in the legend area 4 legends will be displayed; 3 legends corresponds to the 3 respective groups but an additional legend shows up.
How can we hide/suppress the empty legend/group.
In BAM dashboard we have an option 'Suppress Empty Group' but I didn't found any similar property in the pie dvt component.
I'm using JDev 11.1.1.4.0

the values from our column are from database , then how can we edit the data(values) in that columnErrr..Ohkk. There are 3 methods you can do this:
1) Correct the spelling in underlying DB table by updating the column name (check all the references) - Most Recommended
2) In case you don't want to go for 1st option, you can remove the default legend option in Pie Chart by setting it to none and ADD a new Legend View to this Chart View with correct names
3) Change the fx of that column in criteria like
case when col = 'abd' then 'abc' else col end
All above will solve your problem....

How to adjust plot names visibility in the legend of a XY-graph automatically

I have a XY garph that shows 3 plots. Sometimes I need to close some plots on the graph. I can do it. But I also want to delete the plot name on the legend of the graph too, I could not do it. How can I do it? The program is attached.
Egemen
Solved!
Go to Solution.
Attachments:
P-h diagram maker representation.vi ‏29 KB

The solution is actually a bit more complex than you may expect, since you have to change both the plot and the plot characteristics. Attached is something that should work, although it is not very optimized and has some momentary, expected, display glitches.
I do not have LabVIEW 2009 on my development computer, so I edited it in LabVIEW 2011 and saved for previous. I don't think I used anything new, so it should work. Let me know if you need more info.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
P-h diagram maker representation-3.vi ‏26 KB

Can you edit the legend of a pie chart?

Hi,
Here we are again...
We use a BI query to get a list of activities and their status. I want to display this in a pie chart. So for example:
We get a list of 20 activities and there are 15 activities with status "A" and 5 with status "B". I can perfectly display this within the pie chart. (We get a pie chart which is 75% blue and 25% red).
My question: How can I edit the legend so that it doesn't say [blue] = "A" and [red] = "B", but for example [blue] = "Open" and [red] = "Completed".
Is this possible at all with VC 7.0? Thanks in advance.
Best regards,
Jan Laros

Hi Fabien,
That could be a solution, but it is kind of dirty...
I find it very odd that there is not a standard way of editing the legend labels.
Regards,
Jan

I have 2 Gmail accounts - how do I get contact details from the 2 accounts uppdated in my iPhone3gs? Only one shows

I have 2 Gmail accounts, one Google Apps account and one regular Google account.
I use one for my business and the other for personal use.
Each account has a number of contacts (business contacts in the Google Apps account, and personal in the other). My problem is that when I made the configuration, only my personal contacts shows, not the one in the my business account
E-mail and calendars work just fine but the issue with contacts really bothers me. Can some one help?
Thanks!!
Andrés

You can't sync contacts between iPhone and Google directly and (i've tested this right now) you can't sync iTunes with two Google Accounts but only with one Google Account.
There is only one solution: First go to your private Google Account (use the website) and select Contacts. Select all contacts and export them as vCard (for Apple addressbook) and import them into iCloud addressbook. Now do the same with your business Google Account.
It is possible that there is a 3rd-party software which can do this automatically but i don't know any. Sorry!

HT4437 is there a way to connect my ipad with airplay to more than one airplay enabled speaker? at the moment it allows me to connect to only one?

is there a way to connect my ipad using airplay to more than one airplay enabled speaker? when i tap the airplay icon on my ipad i see the list of all the speakers in each room but i can only connect to one at a time. Itunes, on my laptop, allows me to connec to all of them at the same time but Music on my ipad allows me to choose only one speaker at a time. Can several be connected at the same time using Music on Ipad or iphone?

That's great, but not what we want to do. I've been looking at all the boards for a solution to this and, you are correct. There isn't one - at least not one native to iOS. What I think EricB2 would like, as well as many of us, is the ability to take any audio stream (pandora, tune-in radio, etc.) and stream directly to multiple airplay devices from our iPads and iPhones without having to use the computer. Just walk into the house from the car, hit a button on the iDevice and start listening to the same stream we were listening to in the car on all of our home speakers. I know, this is like science fiction. My own opinion is that it would cut into Apples lucrative iTunes business model and really isn't in their best interest, so I don't think it will be happening anytime soon. Bottom line is if you want to use your Apple devices for whole house streaming, you need a computer and music from iTunes($$). Otherwise it's $$ out of Apples pocket.

One of the pages in my website will not display the Amazon links to books I sell. Only one book, wiich is not on Amazon displays on the page. On Internet Explorer, all my books display. why?

Ever since converting my website to WordPress the "Recommended Reading" page doesn't display the book I listed that link to Amazon. Only one book linked to another website displays, but not of the Amazon Books.
This does not happen on Internet Explorer. I have asked this question last week but have not received a response.
Can you help? Go to: www.transitionexecs.com and click on "recommended reading" to see what I mean.

Do you have any ad-blocking software?
Those links have ad in the url that might trigger such software.
See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Preview of some flattened TIFFs show only one of the original layers

When I flatten the files that I have been working on into TIFFs for delivery to clients, sometimes the preview (or thumb nail) shows only a single layer of the original layered file that I was working with. When the file is opened in photoshop, the complete image is there. Is this a bug or is there a way to correct this before I flatten the image? Btw, I have seen this same issue through many versions of photoshop... from CS3 through CS6. When saving the same flattened image as a JPG, the preview saves correctly.

[This is a rewritten post because I posted some garbage first time. ]
I was pretty sure you were going to say OS X.
Is there an alpha channel (possibly used to store a selection) in the problem files?
On a Mac, if there's exactly one alpha channel in a TIFF, the system interprets that alpha channel as transparency when it generates a preview. And if there's more than one alpha channel then the preview sometimes will be weirdly coloured.
Save As TIFF has a checkbox for inclusion of alpha channels, so clear that when exporting your flattened TIFF.

HT1171 I have the apple wireless key board. There is only one delete key and it deletes all data to the left side of the cursor. Where is the delete function for deleting letters that are on the RIGHT side of the cursor?

I have a new wireless apple keyboard. I can only delete items that are to the left of the cursor using the delete key. What key do I use to delete items that are to the right side of the cursor? I have only one delete key.
My old apple wired keyboard has 2 delete keys that enabled me to easly delete data on either side of the cursor.
Thanks

Fn + Delete

How can I customize the scale of my waveform graph to suit my waveform?

I am trying to display a sinusoidal waveform on a waverform graph. I want to make sure that the graph displays only 5 cycles of the sine wave and thus changes the x-axis scale accordingly. Hence this would mean that me plot remains the same no matter what the frequency of sine wave I input, only the scale changes. How can I do this? Also once this is done, is there any way in which I can manually change the scale while labview is running to change to plot?

Here is an example that changes the scale of a graph. I think it is what you are looking for. Post back if it is not.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]
Attachments:
Update_graph_scale.vi ‏40 KB

HT204085 Does the keychain have to be set up from only one Apple ID or can it be used among 2 or more Apple ID users? For example, my daughters each have I'd but my cc is on their accounts and my wife also has her own id with my cc.

Can the keychain from my phone and Apple ID link to 2 other different phones and Apple ID's and 1 new ipod and different id? Both daughters and wife use my credit card on their accounts.

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Customize the legend of a pie graph to show only one series

Similar Messages

Maybe you are looking for