Customized PO printing program and sapscript
Hello,
i have created a customized program and sapscript for PO printing.
its working fine in our config client..when i moved to our training client... 2 information is not printing (ie: vendor name)
i tried to do comparision of the program and sapscript of the 2 client and both are same..
all setting is completed (NACE,MN04 etc) its only the one field not being display when i do my testing in the training client.
i tried to use debug on training client and noticed that the field for vendor name is not being populated... but its working fine in the config client..same set up of vendor etc.
anyway i can check what i have missed out ?
thanks in advance.
Edited by: she on Dec 28, 2009 7:03 PM
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 28, 2009 2:36 PM
Make sure the Vendor number and associated information exist in that client as well. Each client may very well have different Vendor numbers
Similar Messages
-
How find print program and form name from the spool list
Hi,
I have a requirement to find print program and form name from the spool list.
I got the list of programs and forms from TNAPR table, I also want to find out any custom program sending the form directly to the spool.
Cheers
SamHi
Try TSP01-Suffix2
Regards
Raj -
CHANGE OF PRINT PROGRAM IN SAPSCRIPTS
CAN ANYBODY EXPLAIN HOW WE CAN CHANGE THE PRINT PROGRAM IN SAPSCRIPTS?
Hi Kumar,
Go to NACE transaction, Based on the Output type take the Driver program related to your Script
copy it to Zreport and do the changes as per your requirement.
When we wants to fetch data from some other tables into that program we have to write code and to fetch the data into internal tables or variables, and they are used in Script.
reward points if useful
regards,
ANJI -
Adding customer field to selection screen of RFKORD11 - Customer Statement Printing Program:
Hello,
We are required to add an important customer field to selection screen of customer
statement printing program: RFKORD11 for our South African branch.
Please advise us regarding this matter,
is there a proper user-exit or a repair is needed?
Kind Regards.Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better . -
Hi All,
Where I can find a Print Program and Script associated with a particular PO.
Please suggest.
GSHi,
Go to me22n or me23n. Give the PO no . Click on Messages > See whether any output type exists or not. If exists then go to tyransaction nace . In th application select EF -Purchase Order. Click output type> In the output type search your output type Select it and then click on Processing routines you will see the program name & form name.
You can check with the output type in TNAPR table also . By giving output type in KSCHIL field it will give u print program & Form name.
Thanks,
Abhijit -
Search print program and sap script
hii , how can i find trigring print program and sap script for a particular purchase order.
regards Aditya
Edited by: aditya shrivastaba on Apr 14, 2008 9:59 AMHey,
First go with Me22 or 23 with po that you had, and then check with output type for that in the transaction. After that go to TNAPR table and check the corresponding form and print program.
Or else, go with NAST table in that put PO num in 123456 and put in OBJKY field in nast table. It will give you the output type of it, so that u can find the print program and lay out in TNAPR
Many thanks,
Raghu. -
How to attach print program and sap script for F150 transaction
How to attach print program and Z sap script for F150 transaction
Hi,
you can find the customization for dunning in transaction SPRO under this path: Financial Accounting->Accounts Receivable and Accaounts Payable->Business Transactions->Dunning.
Kostas -
Hello All,
I would like to modify the print program and form layout for Transaction FBZ5. Can anyone please tell me what is t
Thanks.Hi,
Nothing to do with FBZ5 transaction. Since this transaction allows you to regenerate the check (output/Spool request), which is already generated earlier through transaction F-58 and not printed correctly.
Here you can choose either to generate a new check number or regenerate a old check spool output by selecting menu item cheque->Print...
If you want to change the standard output form F110_PRENUM_CHCK, you need to developa new form with help of your ABAP guy.
Hope this clarifies your doubt.
Get back to me for further assistance in this regard.
Thanks,
Srinu -
Customer Statement (Standard Program and Scripts)
Hi All ABAPers,
Can anyone tell me the standard programs and their tcodes used for Customer statement with the smartform and sap script names?Custom statement Prog Name: RFKORD11
Script name: F140_CUS_STAT_01 & F140_CUS_STAT_02
Statements would be printed via FBL5N.
Edited by: Alexander on Jul 1, 2009 12:00 PM -
Copying print program for sapscript
Hello all,
I would like to customize the print program PSFCPICK which we are using to print a sap script for shop orders.
So I did a copy of the program and named the new one ZPSFCPICK and assigned the copied print program to the list in OPK8. I know the copied print program is called when printing the script,
but no output is coming out of the printer. When I change it back to the original program, it is working fine.
Is there anything I have to pay attention when copying a print program??
Thanks
AnneHI Anne,
Check in this custom program or copied program whether you are calling FM - CLOSE_FORM
The function module closes the layout set opened using OPEN_FORM. The system executes any terminating processing steps for the last opened layout set. You must use this function module to close layout set printing. Otherwise, no output appears on printer or screen.
Best Regards,
Krishna -
How to pass text from print program to SAPSCRIPT
Hi Friends ,
I need to print this 4 line text on the invoice form between the INFO window and MAIN window . I created a new window in the form and included the text . using include command . The requirement is that if a certain condition is met in the print program then only this 4 line text should be printed on the form .
Any suggestions .
Thank you ,
HariHi Naren ,
Just to verify .
I need to define something like this below in the print program ?
data : v_flag type c .
If customer = 'R' .
v_flag = 'X'.
PERFORM WRITE_FORM.
endif.
In the SAPFORM I defined a new var window "ADD_TEXT"
IF v_flag = 'X'.
INCLUDE Z_TEXT OBJECT TEXT ID ST LANGUAGE ES PARAGRAPH EE
ENDIF.
Please let me know if it is correct and also about the write_form . What paramenters do i pass in the write_form ????
Thanks for your help .
Hari -
Dunning form print program and process
Hi Experts...
Pls. can one help me in finding the dunning form(script) F150_BE_DUNN_02 print program.
And also pls. can any one explain me about hw i need to modify the dunning form for different level.
my que. is do i need to modify form each level or i need to modify only in one form..
and also pls. can any one explain me hw dunning form will be printed.. (through f150 i know) but i cound not find any selection screen parameter as dunning level...
.....PLS. DO NOT GIVE ME THE LINKS......i have been most of the links..
Full rewards will awarded..
Thanks
Yugi...If you're lucky you can find the print program by entering the form in SE71, then Form -> Check -> Texts, Enter. The print program should be listed there. It could be SAPLF150. You'll need to get one of your Accounts Payable people to set up a test case for you in F150.
-
Order confirmation Print Program and Smartform
Hi,
I found a smartform for the order confirmation.'/SMB40/SDORC_A'.I have searched the forums and found the print program to be the same.But we don't have it.We're on ECC 6.0Where can we download the program from?
Thanks..
Edited by: John G on Feb 4, 2008 5:19 PMHi John,
He has given some FM that is generated by that form. But that FM will vary from system to system . So thats very very wrong.
Some times smartforms will not be there in our system . You have to request your superiors to place the forms in place.
Reward points if useful
Regards,
Nageswar. -
ALV Programming and Sapscript...
Hi,
Till date i have only worked in standard reports, now i have to work on ALV report and Sapscript, so if any one have any basic tutorial on ALV and Sapscript, pls email me.
Thanks in advance.Hi arup,
1. This is the most simple form of alv.
2. Minimum, this much coding is required for a normal alv.
The two main FMs for any alv programming are.
<b>REUSE_ALV_LIST_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE</b>
3. just copy paste to get a taste of it.
4.
report abc.
TYPE-POOLS : slis.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvfcwa TYPE slis_fieldcat_alv.
data : begin of itab occurs 0.
include structure usr02.
data : end of itab.
START-OF-SELECTION.
select * from usr02
into table itab.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'ITAB'
i_inclname = sy-repid
CHANGING
ct_fieldcat = alvfc
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IMPORTANT
LOOP AT ALVFC INTO ALVFCWA.
IF ALVFCWA-FIELDNAME = 'USTYP'.
ALVFCWA-NO_CONVEXT = 'X'.
MODIFY ALVFC FROM ALVFCWA.
ENDIF.
ENDLOOP.
Display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = alvfc
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
regards,
amit m. -
Wher e to assign print program and form name
our client is having sap4
can any one tell me were to assign print program
for dunning and the form also
thanks
sreekumarHi,
Path to assign dunning form :
Financial Accounting>Accounts Receivable and Accounts Payable>Business Transactions>Dunning>Printout>Assign Dunning Forms
1 F150_DUNN_01
2 F150_DUNN_01
3 F150_DUNN_02
4 F150_DUNN_02
Best Regards
Ashish Jain
Maybe you are looking for
-
how to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).
-
NO_VALUE_FOR_SID while executing DTP
hi expert, today, while executing the Process cahin, one of its dtp get short dump with an error "NO_VALUE_FOR_SID" raised. if i execute the DTP manually then also it is giving the same error. PSA records & SID atble records are same. also check the
-
Satellite P100 PSPAD: Unable to update BIOS 3.8 and poor video performance
Hello, I have absolute shoddy video performance on my machine as well as the fan on/off issues. To add to my frustrations the WinPhlash programme included in BIOS version 3.8 dumps out when trying to flash giving a PHLASHNT.SYS unable to load message
-
Windows Virtual PC and XP Mode refuses to start after update 25 February 2014
I have been using Virtual PC and XP Mode now successfully for more than 1 year. I am running Windows 7 Profession on a i7-2600 with 8 GB But after the update on 25 February 2014 to both the XP Mode and Windows 7, my Virtual PC no longer works. It loo
-
Safari bookmarks not synching. help please...
HI I've spent ages reorganising my safari bookmarks on my macbook, however they are not uploading to icloud and therefore not synching with my ipad. I've turned off the bookmark synching on the ipad and turned it on again, but I just get the same few