Customizepkg for git repos (or svn,csv,...)

Can anyone point me to a recipe for customizepkg that does the following?
I have a couple of aur packages installed which are based on git repos. Every time I do a sync, the entire repo is cloned to a directory under /tmp, then compiled and installed.
I'd prefer to keep a copy of the git repo on my HD. Then, every time I do a sync, that repo gets updated with a git pull, then configed, made, etc. and installed.
The difference is that just the deltas get pulled rather than the entire git repo being cloned.
TIA.

Similar Messages

Tagurit - a git repo watcher for new tags

https://github.com/gostrc/tagurit
The README.md file has everything to get started so I wont copy and paste it here.
As a package maintainer, I use a program to watch websites for changes to check for new versions.
Sometimes watching only the git repo for new tags is sufficient and is better in some ways. (no need to filter output, uses less bandwidth, less false positives)
I couldn't find a tool that did it, so I wrote my own.
Reply with any comments or suggestions you might have.
Thanks to falconindy for coming up with the name.
Cheers & have a happy new year!
Edit:
removed the tagurit package from the aur, and now made it available as a gem, please see README.md for more info.
Edit:
added svn and hg support
Last edited by tomd123 (2012-01-01 22:50:34)

Hi tarlinian,
When use git command to push a local git repository to remote Git team project in Visual Stduio Online, you might need to list your existing remote alias for your repository after setting alternative credential. Please check this
blog for more information about pushing a local git repository to remote in Visual Stduio Online.
You can also refer to Amor and Trevor's replies in this
thread for more information about how Git works with Visual Studio Online. If your issue still exist, please elaborate more details about your scenario.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Preference for git over other distributed version control?

Out of curiosity, and not to start a flamewar or anything...but, why does it seem like most Archers have an preference for git over other distributed version control software choices? I tend to like Mercurial, as it was an easy transition from using SVN for so long, but reading the mailing lists, it looks like most of the Arch project development is moving toward git. Is there something I don't know?

elasticdog wrote:Would you say you like it more than Mercurial, or just now that you've been forced in to using it, it's not bad after the learning curve? Which one do you use for personal projects?
I do prefer git, after using mercurial for a quite a while.
- Git is fast (very fast).
- The format patch and other random porcelain are great.
- The syntax and UI is a bit unruly, but once you get the hang of it, it's not a big deal.
- Once very awesome thing for me is the ability to do localized in-repo branching, just checkout a local branch, and your tree changes to that branch. Do stuff, commit, whatever. Then checkout your other branch, and bam. You can diff and merge between local branches, create new ones, throw ones away, etc.. all within the same tree (no need for external clones).
- The quick and easy rebase functionality is great too.
I guess I would say git is powerful, but certainly arcane.
I think mercurial got named branches a little while ago, so I haven't used them. I *think* they are similar to git branches, but I don't know for sure. The little I have read about them make them seem a bit funky.
I prefer git, but mercurial is a fine choice too.
I would say that pretty much everything out there besides these two sucks.
....and codemac is crazy by the way. map-my-scm-zealotry.

Can't add remote git repos using Xcode/OS X Server

Hi everyone,
I recently installed OS X Server on my personal machine and attempting to host some git repos.
When I try to create a new project & remote repo with Xcode I get an error -
Could not connect to the remote repository because the server was unreachable.
If I attempt to configure it again after the project has been created I get this error -
Cannot create hosted Git repositories at path because path already exists: /Library/Developer/XcodeServer/HostedRepositories/EmptyApp
Looking at the server - I can see the repos were actually created, but for some reason I can't connect/push to them. The HTTPS/SSH access are enabled.
Is something not configured correctly or any way to get at a more detailed error?

Using the CF + Tomcat Bundle is working for me, including RDS. The only thing I can't set up is the web root, glad I can use localhost, but i tried to set up my sites folder, but could not set up the url, so it does not work.

Setting timeout option for GIT in TFS 2013 update 4

Hi all,
I want to increase the timeout option for GIT but I do not know how to set it.
Please help with how can I set the timeout value for GIT. I am getting "Timeout Error" whenever I am trying to run the 'git pull' command. The repository size is in GB and its taking time to complete the action and during this process 'Timeout'
occurs.
Please help me.
Thanks,

Hi Vaibhav,
I do not believe there is a straightforward way to achieve this since stakeholder is replacing limited access. I think you may have to raise User Voice here https://visualstudio.uservoice.com/forums/121579-visual-studio/category/30925-team-foundation-server
Cheers!
Chaminda

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

[SOLVED] Sigs not found for xyne repos

edit: -facepalm-
Changing
SigLevel = Required
to
SigLevel = PackageRequired
in pacman.conf did the trick
As the title suggests I'm having problems with a lack of signatures for Xyne's repos (not sure if this topic belongs here for unofficial repos?). It was working fine last night when I last upgraded the computer
[11:59:25] $ sudo \pacman -Syu
error: xyne-x86_64: missing required signature
error: xyne-any: missing required signature
:: Synchronizing package databases...
core is up to date
extra is up to date
xyne-x86_64 is up to date
xyne-any is up to date
community is up to date
error: database 'xyne-x86_64' is not valid (invalid or corrupted database (PGP signature))
error: database 'xyne-any' is not valid (invalid or corrupted database (PGP signature))
When I attempt to refresh the mirrors
[12:00:31] $ sudo \pacman -Syy
error: xyne-x86_64: missing required signature
error: xyne-any: missing required signature
:: Synchronizing package databases...
core 107.8 KiB 175K/s 00:01 [--------------------------------------------------------------------------] 100%
extra 1408.5 KiB 183K/s 00:08 [--------------------------------------------------------------------------] 100%
xyne-x86_64 2.7 KiB 330K/s 00:00 [--------------------------------------------------------------------------] 100%
error: failed retrieving file 'xyne-x86_64.db.sig' from xyne.archlinux.ca : The requested URL returned error: 404
error: xyne-x86_64: missing required signature
error: failed to update xyne-x86_64 (invalid or corrupted database (PGP signature))
xyne-any 15.1 KiB 41.1K/s 00:00 [--------------------------------------------------------------------------] 100%
error: failed retrieving file 'xyne-any.db.sig' from xyne.archlinux.ca : The requested URL returned error: 404
error: xyne-any: missing required signature
error: failed to update xyne-any (invalid or corrupted database (PGP signature))
community 1765.0 KiB 181K/s 00:10 [--------------------------------------------------------------------------] 100%
error: database 'xyne-x86_64' is not valid (invalid or corrupted database (PGP signature))
error: database 'xyne-any' is not valid (invalid or corrupted database (PGP signature))
Updating the package keys manually
$ sudo \pacman-key --refresh-keys
gpg: key C2E5C0D2: "Xyne. <[email protected]>" not changed
That key is the same as the one on Xyne's site and the TU page
pacman.conf
[12:10:41] $ cat /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
CacheDir = /mnt/Packages/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
UseDelta
TotalDownload
CheckSpace
#VerbosePkgLists
ILoveCandy
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[kde-unstable]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[xyne-x86_64]
SigLevel = Required
Server = http://xyne.archlinux.ca/repos/xyne-x86_64
[xyne-any]
SigLevel = Required
Server = http://xyne.archlinux.ca/repos/xyne-any
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
#[multilib]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Last edited by SS4 (2012-07-25 13:53:50)

Xyne wrote:
SS4 wrote:
edit: -facepalm-
Changing
SigLevel = Required
to
SigLevel = PackageRequired
in pacman.conf did the trick
No, that was my fault. I updated my release scripts yesterday and the new ones did not create the database signature symlink. I just fixed it about 10 minutes ago.
Change the SigLevel back to Required, otherwise Pacman will not verify the databases. Everything should be working again.
Cheers, upgrading is back to normal (good work on the repo btw)

Libgit2 Error - Trying to checkout/clone a git repository with Visual Studio Tools for Git

I'm trying to clone a branch from our git repository using Visual Studio Tools for Git. I'm doing the following:
1. We have a local server that stores all our repositories and they are tracked using GIT+Stash
2. I create a subbranch B1 from master in repository X using stash
3. Stash will give me a URL in the form http://user@stash:7990/src/x/repository.git
4. I go to Visual Studio (where I already installed Visual Studio Tools for Git) and follow the instructions to clone this branch to my local machine using the procedure as described in: Open and Clone a Git team project http://msdn.microsoft.com/en-us/library/hh850445.aspx#remote_3rd_party_connect_clone
5. Visual studio shows the following error: An error occurred. Detailed message: An error was raised by libgit2. Category = Zlib (Error).
Failed to inflate packfile
What is libgit2? Is there anything I should change in my settings or paths? The only workaround I have found for this issue is to clone my branch through Source Tree (third party tool) and then open visual studio, then any other functionality will be fine
(e.g. commits, push, sync, pull etc, all this I can do directly from Visual Studio)... but why can't I clone from Visual Studio?
Notes:
- We're not using TFS (i.e. we only use Git and I'm effectively trying to do the step found in this URL: http://msdn.microsoft.com/en-us/library/hh850445.aspx#remote_3rd_party_connect_clone)
- We use Atlassian Stash (installed in our servers) to create the repositories and branches
- I'm using Visual Studio 2012
David

Hi David,
I am sorry that I can't reproduce your issue on my machine. I can't set the shared folder path (\\DEVELOPMENT) as local path, but I can set D:\folder which maps to the
\\DEVELOPMENT path as the local path.
Maybe you can submit one feedback on the Microsoft Connect site here above your issue:
https://connect.microsoft.com/VisualStudio/feedback/CreateFeedbackForm.aspx?FeedbackFormConfigurationID=5303&FeedbackType=1
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[SOLVED] AUR blackbox-git: cannot clone git repo

Hi
I'm trying to install blackbox-git package from aur.
When I do "makepkg -s" inside unpacked blackbox-git repository I receive the following error message:
==> Making package: blackbox-git 0.70.2-1 (Tue Feb 4 18:19:42 CET 2014)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Cloning blackboxwm git repo...
Cloning into bare repository '/home/jaro/blackbox-git/blackboxwm'...
fatal: unable to connect to github.com:
github.com[0: 192.30.252.129]: errno=Connection timed out
In PKGBUILD (https://aur.archlinux.org/packages/bl/b … t/PKGBUILD) I can see
see that it clones a package from:
http://github.com/bbidulock/blackboxwm
When I do the following manually the repo gets cloned perfectly:
git clone http://github.com/bbidulock/blackboxwm
I cannot just install blackbox from community repo since it does not contain "bt" library required by bbkeys.
Please help me
Last edited by jaro (2014-02-05 16:52:12)

jaro wrote:Works great. Thanks
[SOLVED]
Please remember to actually add [Solved] to the beginning of your thread title.
All the best,
-HG

[SOLVED] How to replace the source in a pkgbuild with a git repo?

I am trying to build csound (present in AUR: https://aur.archlinux.org/packages.php?ID=779), but compilation fails, as noted in the comments. One of the commenters says that he has successfully built the package by pulling the sources from the git repo.
How can I do that? I know how to use git. What I don't know is
(1) how to use git from within a PKGBUILD file,
or
(2) how to instruct the PKGBUILD file to use the locally pulled git repo
Cheers,
Stefano
Last edited by stefano (2012-10-06 15:11:14)

Try csound-git https://aur.archlinux.org/packages.php?ID=48830 but see the comments - problems again.
You can see how to deal with git in the PKGBUILD.
Another way is to instal binary package from an unofficial user repository. archaudio-preview has csound 5.14.2-1.
https://wiki.archlinux.org/index.php/Un … positories
[archaudio-preview]
# unverified PKGBUILDs AND/OR untested packages
Server = http://repos.archaudio.org/$repo/$arch
Last edited by karol (2012-10-06 14:48:29)

Help with script for "Import AD users from CSV with checks first"

Hi everyone.
Can anyone tell me if i am on the right track here?
I want to be able to provide a CSV with users and import into a new AD domain/forest. But i know there already are some AD accounts so i need to run some checks. For now i am checking only on Name and Email.
The issue i have is is with "write-host "$UserFullName was not found. Creating user.". It outputs this 19 times which is the same amount of times as there are users in AD in this OU.
Not sure if my method is right.
$allImportedUsers=@()
$allUsersArray=@()
$searchbase="OU=PL,DC=EUECS,DC=CORP,DC=ARROW,DC=COM"
$path = "OU=Users,OU=PL,DC=EUECS,DC=CORP,DC=ARROW,DC=COM"
$allImportedUsers = Import-CSV polandusers_edited.csv
$allUsersArray = Get-ADObject -LDAPFilter "objectClass=User" -SearchBase $searchbase -Properties * | select *
$allImportedUsers | ForEach-Object {
$Firstname = $_.givenname
$Lastname = $_.surname
$UserMail = $_.EmailAddress
$UserFullName = $Firstname+" "+$Lastname
$importUserSAM = $_.Samaccountname
$allUsersArray | ForEach-Object {
$currUserFirstname = $_.givenName
$currUserLastname = $_.sn
$currUserMail = $_.mail
$currUserFullName = $_.name
$currUserSAM = $_.samaccountname
$currUserDN = $_.DistinguishedName
if($currUserFullName -eq $UserFullName) {
write-host "CSV $UserFullName matched on name"
$userMatched=1
if($currUserMail -eq $UserMail -AND $userMatched -ne 1) {
write-host "CSV $UserFullName matched on email"
$userMatched=1
if($userMatched -ne 1) {
write-host "$UserFullName was not found. Creating user."
$userMatched=0
If only i had a cool signature!! ;)

Move below to outside the inner for-each loop:
if($userMatched -ne 1) {
write-host "$UserFullName was not found. Creating user."
$userMatched=0
so the bottom should look like
}if($userMatched -ne 1) {
write-host "$UserFullName was not found. Creating user."
$userMatched=0

Searching for a data in a CSV file

i have my below code for reading a CSV file..
public static void main(String[] args)
ReadCSVFile obj = new ReadCSVFile();
try
BufferedReader in = new BufferedReader(new FileReader("RecordsNet DocType List1.csv"));
String str;
while ((str = in.readLine()) != null)
String s[] = str.split(",");
for (int i = s.length - 1; i >=0; i --)
System.out.println(s);
in.close();
catch (IOException e)
}//class main end
}// class ReadCSVFile end
i want to read my CSV file only if has some data in any column. how do i introduce this find clause while reading a CSV file
Please Help

You could do something like this:
                String[] s = str.split(",");
                for (int i = (s.length - 1); i >= 0; i--)
                    if (s.length() > 0) // check if there is data in the column
System.out.print(s[i] + " ");
System.out.println();
Next time please paste your code between code tags exactly like this:
[code]
your code
[/code]
You may read the [url http://forum.java.sun.com/help.jspa?sec=formatting]Formatting tips for more information.
Regards

Best data Structor for dealing with very large CSV files

hi im writeing an object that stores data from a very large CSV file. The idea been that you initlize the object with the CSV file, then it has lots of methods to make manipulating and working with the CSV file simpler. Operations like copy colum, eliminate rows, perform some equations on all values in a certain colum, etc. Also a method for prining back to a file.
however the CSV files will probly be in the 10mb range maby larger so simply loading into an array isn't posable. as it produces a outofmemory error.
does anyone have a data structor they could recomend that can store the large amounts of data require and are easly writeable. i've currently been useing a randomaccessfile but it is aquard to write to as well as needing an external file which would need to been cleaned up after the object is removed (something very hard to guarentee occurs).
any suggestions would be greatly apprechiated.
Message was edited by:
ninjarob

How much internal storage ("RAM") is in the computer where your program should run? I think I have 640 Mb in mine, and I can't believe loading 10 Mb of data would be prohibitive, not even if the size doubles when the data comes into Java variables.
If the data size turns out to be prohibitive of loading into memory, how about a relational database?
Another thing you may want to consider is more object-oriented (in the sense of domain-oriented) analysis and design. If the data is concerned with real-life things (persons, projects, monsters, whatever), row and column operations may be fine for now, but future requirements could easily make you prefer something else (for example, a requirement to sort projects by budget or monsters by proximity to the hero).

Best Practise for loading data into BW CSV vs XML ?

Hi Everyone,
I would like to get some of your thoughts on what file format would be best or most efficient to push data into BW. CSV or XML ?
Also what are the advantages / Disadvantages?
Appreciate your thoughts.

XML is used only for small data fields - more like it is easier to do it by XML rather than build an application for the same - provided the usage is less.
Flat files are used for HUGE data loads ( non SAP ) and definitely the choice of data formats would be flat files.
Also XML files are transformed into a flat file type format with each tag referring to the field and the size of the XML file grows to a high value depending on the number of fields.
Arun

Script to enable WOL for list of computers in CSV format

We are looking to enable Wake On LAN in our environment of 30,000+ workstations. I have been successful in getting the workstation to wake up, but I had to manually a) change the BIOS setting to enable WOL and b) change the Adapter setting enabling
power management and WOL in Windows.
We will be piloting this to 250 or so workstations, to see the functionality of getting WOL to work (for software updates in the middle of the night). However, we don't want to have to "touch" each and every one of them. Thus, I'm looking to create
a VBS script to enable WOL and having it reference a CSV file that contains a list of workstation names.
Any help would be great!
Thank you!

Hi,
If you have Dell machines, you can use their CCTK to adjust the BIOS settings:
http://en.community.dell.com/techcenter/systems-management/w/wiki/1952.dell-client-configuration-toolkit-cctk.aspx
I haven't used this tool in years, but I remember it being pretty friendly.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Customizepkg for git repos (or svn,csv,...)

Similar Messages

Maybe you are looking for