Customizing display.jsp in report folder

Hi everyone,
I'm working on Sun IDM reports and I've customized the edittemplate.jsp according to me , but when I run the report it redirects me on diplayresult.jsp for generating the final report output. I want to know the transition between these two files edittemplate.jsp to diplayresult.jsp, Because edittemplate.jsp never mention how jump on diplayresult.jsp .
Regads
Nitesh Bhagat

Hi Roz,
If I understand correctly, you want open a file in Adobe Reader when you click on a file name. We can use “Go to URL” action to get the same effect.
Suppose we have a dataset (DataSet1) with FileName field. Please refer to the steps below:
Share the specify folder.
Add a table in the report body, add FileName field in the table.
Right click the FileName text box, select Tablix Properties.
Click Action in the left pane. Select “Go to URL”. And type below expression:
="file://ServerName/Folder/" & Fields!FileName.Value & ".pdf"
When we deploy the report, we can click the file name to open the corresponding file.
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Similar Messages

#ERR Customer Display in XL Reporter Report

Hi all
Any idea why the result of customised XL Reporter Report with Customised UDF fields suddenly Display #ERR Customer?
This does not happen to Office Excel 2007.
Kedalene Chong

Hi,
Please check SAP notes:
976218
- Upgrading XL Reporter with user-defined fields exposed
948751
- XLR - UDFs with same name in B1 have different name in XLR
Thanks & Regards,
Nagarajan

Error when trying to display a Webi report through the Folder iView

Hi all
I am getting the following error when Im trying to display a Webi report through the SAP Portal. We have installed the SAP Integration Kit and are able to see the content of the Infoview. However when we click on a Webi report, we receive the following error:
Could not get page number. (Error: RWI 00223) (Error: INF)
Have anyone else encountered this problem? Please assist! Any help will be rewarded.
(We are running XI Rel 2).
Addition from trace file (tomcat):
com.businessobjects.rebean.wi.CommunicationException: Could not get page number. (Error: RWI 00223)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.setBlobKey(OccaReportComAdapter.java:542)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:376)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:297)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:384)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:407)
     at org.apache.jsp.viewers.cdz_005fadv.viewReport_jsp._jspService(viewReport_jsp.java:1182)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:704)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
     at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:670)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:637)
     at org.apache.jsp.viewers.cdz_005fadv.report_jsp._jspService(report_jsp.java:325)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Furthermore I'd like to see an example of the cms_name entry. The documentation states: In addition, specify the Application Parameter for each iView. For this property, enter cms_name=[cms] for the fully qualified server name., but I have doubts as to what format to use.
Kind regards,
Martin Søgaard

Hi Jim Ji
The report can be displayed from the java infoview, no doubt, so the report itself works.
But the report cannot be seen from the "SAP Infoview" (:/businessobjects/enterprise115/sap) which is the infoview, I reference from the Folder iView (through the system in the SAP portal). And since the SAP Portal Integration Kit seems very old - the Folder iView was created 12-08-2004 by Ingo Hilgefort - there might be an old version of the jar-files somewhere in the installation.
I guess I should check the version of the jar-files in WEB-INF/lib of our web application (Tomcat) folder, and see if they have been overwritten by the SAP Portal Integration Installation or are an older version of the files in Program FilesBusiness Objectscommon3.5javalib? And also check if somewhere in the .../sap installation there are some old jar-files?
Kind regards,
Martin Søgaard

How to display a html report on jsp page---urgent

i want to display a html report wen a tab is clicked.can any tell me how to do tat.

Didn't quite get your requirement. What do you mean by an HTML report?

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

How to disable Format Warning when displaying JSP in Excel under MS-Office

We have an application running in WebSphere 6.0 container, the application displays jsp data in Excel, it had no problem before MS-Office 2007 was install. However, after MS-Office 2007 is used, following format warning dialog box is always displayed:
The file you are trying to open, Requests[1].xls, is in a different format than specified by the file extension.
Verify that the file is not corrupted and is from a trusted source before opening the file.
The user has to click the "Yes" button before the Excel report can be successfully displayed. This is not acceptable by our production users, and I need your helps to get rid of this dialog box.
The application uses struts. The Action class retrieves data from database and the data is forward to the result jsp
in an data object set in an attribute of the session's Request object. The Action class also set the display info, such as the contentType,etc., in session's Response object (please see below for details).
The result jsp retrieves data from the data object and display in Excel according to the display info provided in the
session response object.
To eliminate any possible problem that may be caused by the data, I have simplified the result jsp by removing original
codes (such as data object forwarded from Action, and Tag Library, etc.), and just hardcoded few data for displaying in Excel, however, the same format warning box still always shows up.
My Action class set display info as below:
response.setContentType("application/vnd.ms-excel");
response.setHeader("Expires", "0");
response.setHeader("Cache-Control","must-revalidate, post-check=0, pre-check=0");
response.setHeader("Pragma", "public");
response.setHeader("content-disposition","attachment; filename=Requests.xls");
My simplified result jsp is listed below:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
<HEAD>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>

<TITLE></TITLE>
</HEAD>
<BODY>
<TABLE border="1">
     <TBODY>
     <TR>
     <td><p align='left'>myData1</p></td>
     <td><p align='left'>myData2</p></td>
     <td><p align='left'>myData3</p></td>
     <td><p align='left'>myData4</p></td>
     </TR>
     </TBODY>
</TABLE>
</BODY>
</HTML>
So, I reduced the result jsp to contain only few hardcoded data, but the format warning always shows up. Is it caused by inconsistency between the MS-Office 2007 browser and the JSP engine in WebSphere 6.0 Web container? Need your help to resolve this problem.
Thanks in advance.

That's the caveat of fooling your webbrowser and Excel with a plain HTML page along an Excel content-type and Excel extension.
Don't do that. That's plain stupid. Provide a real binary Excel file. You can create one using Apache POI HSSF or Andy Khan's JExcelAPI. Alternatively -and more recommended in case of large reports-, just use the CSV format. It's easy to create a CSV file in 20 lines of code and Excel perfectly understands CSV formats. Don't forget to change content-type to CSV.

Customer/Vendor/supplier Analysis Report

Hi all,
when ever i am going to MCOE,MCOP,MCO1,MCOA
'there is no data' popup is coming,
Please help me
Regards
Hanamanta

Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
Regards,
Rajesh Banka
Reward points if helpful.

Display two main reports in one

Post Author: BSong
CA Forum: Crystal Reports
I am try to display both Customer Invoice and Payment reports in one report for a chosen Customer. Since neither Invoice nor Payment should be sub report, how do I combine them together in one report two sections? Is this possible? I am pretty new working with Crystal Report. Could anyone help me on this?
Thanks,Bill

Post Author: BSong
CA Forum: Crystal Reports
Thanks for your replay.
But how do I link the two if they use two separate datasource? and each has its own prompt. Could you explain.
Thanks,Bill

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

Presentation Layer - Custom Display Name

We use Oracle Datamarts as Data Source thus in our Repository a lot of information is just routed through. Of course we configured the joins in the physical layer and added some hierarchies, joins and calculated measures to the business model.
The question is now where to set the right column names which the end users will see (translation from technical column names to business column names). Normally I read that the naming should be done in the business model and then can be copied to the presentation model.
Is there any reason why not to leave alle the technical column names through to the presentation model and just to do the naming with the Custom Display Names? This had the advantage that we could rename the column display names and the reports never had to be modified.
Thank you for your thoughts and input

The main reason could be this:
If the attribute has been used in multiple subject areas, there is no need to go each subject areas and rename them, instead a one time rename in Business Modeling layer will do the work. Eg. Suppose there is a common dimension, say, Supplier/Customer/Time which are used in multiple subject areas. Renaming in Business modeling layer will be easier than going to each subject areas and rename them in presentation.
Hope this helps..
Thanks,
Anilesh

Report and user statistics display in Obiee report

I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically.
The report consist following column info...
Report Name|Report Folder|Report Path|Description|Description ID|Owner|Subject Area
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
Header 9
Report Name
Report Folder
Report Path
Table
user
Unused ColumnIDs
Column Created
Report Creator (user)
Report last modified
like etc..........
SO, the above said fields has to be update and provide dynamic data in the report. (Also those field info is not available in Usage tracking table so we need get those information from Catalog manager also...........)
For this I have one alternate idea like to get the solution by planning to get this solution by CSV file.If you would provide any solution like CSV get updated dynamically from Catalog manager it would be a great thing to me....Your help is highly appreciated.
How to implement this requirement ............could you provide a right path to achieve this solution.
I hope yours alternative solution.

Thanks for the reply Yannick.
We have install/configure WebCenter analytics and activity graph.
Wehave added Login Metrics in our Group Space and we are getting default login count for specific time frame but when we define a filter under User Property of any property like city, department name, phone title etc after refreshing data it is giving error like
WCS#2011.03.31.12.47.31 : Irresolvable error(s) occurred. You may want to contact Administrator with the error reference.
Please help how to solve this.

Diff in customer balance in the report S_ALR_87012172 & fbl5n

Dear Experts,
I have a problem where I am getting difference in customer balance in the report S_ALR_87012172 & fbl5n. I have completed f.07 for the required year, but the problem still exists for some customers.
Kindly help.
regards

Hello,
Refer SAP Note
Note 716640 - Balance display: Drilldown: Total of open items <> balance
Note 323813 - FV60/FB60: document created without secondary index
Note 327139 - Balance display FI: drilldown perfrmnce for balncs
Regards,
Ravi

Customizing Book Of Sales Report

Hi
I am customizing Book Of Sales report which comes with Russia Localization Patch (RLP)
The requirement is to increase width of one column.
Since this report is in PLSQL whith output as html and its using CSS
I am not able to figureout how to increase the width of a particular column.
Please help

HI
You can get the details of configuration using the below FM
VC_I_GET_CONFIGURATION
For display FM VC_I_DISPLAY_CONFIGURATION
I feel its the easy to fetch the configuration details
regards
Prashanth

Ship-to party wise Bill to party display any standard report?

Any one know
Ship-to party wise Bill to party display any standard report?
Thanks in Advance.
Shailendra

hi
can you please let us know your requirment??
if you want to get BILL TO PARTY assgined to SHIP TO PARTY then use table KNVP where you can pass Ship to party and select Partner Functn = WE (SH)
you will get all the RE(BP) for that customer
or you can develop Z report also

Sharing custom display profiles between multiple users

Hello,
I'm brand new to Mountain Lion and I can't figure out how to share a custom display profile between multiple users on the same MBP. I'm a photographer and I have two users set up on my laptop - one personal and one for shooting. I'm using a Color Munki to calibrate my external monitor and the software creates a profile.
Previously, I could go into my library, copy the profile and drag it into the colorsync folder for my other user, then switch to my other user and find that profile in system preferences/displays.
I have no idea how to do this in Mountain Lion.

Let me simplify this by refering to User A and User B to represent the two separate users I've created on my MBP.
I've done some more digging and here's what I've found: In the Color Sync utility for User A my custom profile is in a user folder, represented by the name I gave the file when the profile was created. That's no problem
When I switch to the User B, there are two profiles in the Color Sync Utility named "Display". The "Display" file was created at the same time my custom profile was created, however, the file names don't match and I don't know why there are two of them.
I'm fairly certain that "Display" profile is the custom profile I want to use, but there's a problem coming down the road: what's going to happen when I profile my monitor again in 3 weeks.

Customizing display.jsp in report folder

Similar Messages

Maybe you are looking for