Customizing SAP modules

Is there a way to know if system was customized with any SAP module like SD,MM etc?

Hi,
There are some tables where you can find the data for the customisations....
DD02V and
df50l, df50o, cusdefault, tpr_xref_p, tpr_xref_d,
tcusglobal, ttxformat, tnoteed, tdcld, ttreei, sflaw, ttreef.
Hope it helps.
Lokesh
Pls. reward appropriate points

Similar Messages

SAP PI crashes because of Custom Adapter module

Hi,
We are facing a strange problem. We have deployed a custom adapter module developed in java which accesses a Hardware Security Module(HSM) and uses the keys in HSM to digitally sign our data. Now, when I use particular methods in this code and deploy it on PI server, the server crashes while testing this out. As soon as I run the channel having this adapter module, PI server becomes unavailable. It restarts on its own after a few minutes.
One of the reasons I identified to be causing this issue is the signing mechanism used in code. When I used a mechanism that was not supported or not correct, it crashed the server. If i corrected it, it worked fine. I found no other thing in my code causing this behaviour apart from this mechanism. But I am still not able to understand how a single method in a code can cause the whole server to crash. Has anybody here faced such a problem? Any pointers would be appreciated.
We are using SAP PI 7.31 java only installation.
Thanks,
Ravi Desai

Hi Ravi
1. To check if it is a memory issue. Once you start the channel, check the memory usage in nwa. Check if the memory is increasing once the channel is started.
2. Add debug statements to print logs in default traces at as many places as possible. Since your code is not reaching the Catch block, using the debug statement you can reach the line in the code which is causing this issue.
Regards
Osman Jabri

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How to develope custom function modules in SAP R/3 system to maintain c...

How to develope custom function modules in SAP R/3 system to maintain cross
referencing tables for sales order number.

Hi Raja,
Steps to crate FM..
Follow these steps..
Go to the T: code SE37
First You Create Function Group
On That u specify
Function Group Name..............
Short Text..............................
save...
Go to SE 37
Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
Short Text.......
Save...
Next Go to Attributes..
Select Radio button : Remote enabled model
Go to Parameters..
Click Import...
Give Parameter Type Associate type S.t
next Click Export...
Give Parameter Type Associate type S.t
Next Click Tables Button..
Specify tables..
Next click source code button..
Write Source code here..
Eg : Select statements Etc..
Finally we should be select the Radio button Enable remorely
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
Hope this information is useful to you..
Reward points if it is usefulll....
Thanks ,
Satya Kumar..

Custome login module:SDA can't reference com.sap.portal.usermapping_api.jar

I made my own j2ee custom login module and one of the things I wanted the custom login module to do is to clear out the UME roles for the user logging in, "download" the role assignments from an ABAP WAS system, and reassign those roles in UME. I got the coding done and created my JAR file. In building the SDA file, I can't figure out how to add com.sap.portal.usermapping_api.jar to the provider.xml file. I tried specifying it on thru "create new" and tried looking for it in the list from "Select library/interface/service, but I still get an error when loading the login module.
Does anyone know how to do this?
TIA.
Mel Calucin
Bentley Systems, Inc.

Hi Mel,
why do you think you need to reference the portal's user mapping service API? I'm not sure whether you can reference Portal services at all from J2EE level.
If you need to use user mapping in your login module, you don't need the Portal's user mapping service. Instead, you can directly use the user mapping interfaces and methods of the UME, which are contained in a J2EE library.
You can use something like the following reference to get runtime access to the UME API library:
<reference reference-type="weak">
<reference-target target-type="library">
com.sap.security.api.sda
</reference-target>
</reference>
Accessing user mapping is possible via com.sap.security.api.UMFactory.getUserMapping() which returns an object implementing com.sap.security.api.umap.IUserMapping. This is the main entry point for all user mapping related features.
Please check the Javadoc for details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/javadocs/nw04/sp12/user management engine - version 4.0/index.html
I hope this helps.
Best regards
Heiko

SOAP Web Service + Custom Login Module issue

Hi Guys,
We faced an authentication issue in our project. Could you please give any advice how the issue could be resolved.
Environment: A simple SOAP Web Service on top of POJO class created in a Web Application. The web application deployed to the SAP NetWeaver 7.10 Application Server in the Enterprise Application Archive.
Configuration:
      Single Service Administration Application(NetWeaver Administration -> SOA Management -> Application and Scenario Communication -> Single Service Administration)
       The web service endpoint has authentication configured to use User ID/Password HTTP Authentication.
    Authentication Application(NetWeaver Administration-> Configuration Management->Security->Authentication)
      The application(<vendorName>/<earName>*<vendor>~<webAppName>) has Authentication Stack configured to use our custom login module.
Issue: BasicPasswordLoginModule used by the J2EE when we are trying to execute the web service using Web Service Navigator(checked in debug mode). It seems that we missed something in configuration.
Idea: The main Idea is to use our custom login module when we are executing a web service.
Could you help me to resolve the issue.
Thanks,
Dmitry
Edited by: Dmitry Eidin on Jul 17, 2009 3:46 PM

> The web service endpoint has authentication configured to use User ID/Password HTTP Authentication.
That's the point.

Unable to deploy custom adapter module in PI 7.31

Hi pros,
I created a custom adapter module to split some complex input files to multiple messages. We use a SAP PO 7.31 java-only installation. I followed this document to create my adapter module:
How to Create Modules for the JEE Adapter Engine
I know it is for PI 7.1 but a colleague of mine said that he was able to create a running adapter module for PI 7.3 following the guide. I created the following projects:
EAR project references the EJB project:
Project facet of the EJBproject:
ejb-jar.xml config:
application-j2ee-engine.xml (in EAR project):
When I try to deploy my module, I get the following error:
Java version:
NWDS version:
Any hint is appreciated! What can be wrong? What can I check again?
THANKS!
Message was edited by: Stefan Münchow

I am not sure if the version is the problem. We have PI 7.31, support package 14, patch level 0 and NWDS 7.31 support package 12, patch level 4. The version of NWDS is lower than the version of the PI. According to Note 1599298 the error occurs when the NWDS is higher than the one of PI. Besides, we are able to deploy BPMN processes with the same NWDS to the same server.
This is the exact exception trace shown in NWDS:
com.sap.ide.eclipse.sdm.deploy.DeploymentException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:110)
------------- Nested exception -------------------
com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:862)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.ide.eclipse.deployer.dc.deploy.DeployProcessor70.deploy(DeployProcessor70.java:105)
at com.sap.ide.eclipse.sdm.threading.DCDeployThread.run(DCDeployThread.java:80)
Caused by: com.sap.engine.services.dc.cm.deploy.DeploymentException: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:246)
at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:67)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:282)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:84)
at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:100)
at com.sap.engine.services.dc.cm.deploy.impl.DeployThread.run(DeployThread.java:39)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3298] Operation [deploy] of [sap.com_SplitArticleFileModule_EAR] failed
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:167)
at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:138)
at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:57)
at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:213)
... 8 more
Caused by: com.sap.engine.services.deploy.server.utils.DSRemoteException: ASJ.dpl_ds.006193 Operation [deploy] of [/usr/sap/DP2/J64/j2ee/cluster/server0/temp/tc~bl~deploy_controller/archives/213/SplitArticleFileModule_EAR.ear] failed
at com.sap.engine.services.deploy.server.DeployServiceImpl.catchDeploymentExceptionWithDSRem(DeployServiceImpl.java:3370)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:315)
at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:139)
... 11 more
Caused by: com.sap.engine.services.deploy.container.rtgen.GenerationException: Open failed for '/usr/sap/DP2/J64/j2ee/cluster/server0/temp/deploy/SplitArticleFileModule_EAR.ear1422275742985/com.sap.aii.utilxi.server.jar' with fd 218 returning message 'couldn't find 'END' tag' and errno 0 after trying cache.
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.createSingleModule(WebServicesGenerator.java:100)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.generate(WebServicesGenerator.java:54)
at com.sap.engine.services.deploy.container.rtgen.AnnotationsSupportingGenerator.generate(AnnotationsSupportingGenerator.java:27)
at com.sap.engine.services.deploy.ear.jar.moduledetect.GeneratorWrapper.generate(GeneratorWrapper.java:43)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generate(ModuleGeneratorTool.java:110)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generateOverExistingModules(ModuleGeneratorTool.java:97)
at com.sap.engine.services.deploy.ear.jar.ModuleGeneratorTool.generateModules(ModuleGeneratorTool.java:80)
at com.sap.engine.services.deploy.ear.jar.EARReader.read(EARReader.java:240)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.prepareNewDeploymentInfo(DeployUtilTransaction.java:217)
at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:199)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:473)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1836)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:360)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:313)
... 12 more
Caused by: java.util.zip.ZipException: Open failed for '/usr/sap/DP2/J64/j2ee/cluster/server0/temp/deploy/SplitArticleFileModule_EAR.ear1422275742985/com.sap.aii.utilxi.server.jar' with fd 218 returning message 'couldn't find 'END' tag' and errno 0 after trying cache.
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:154)
at java.util.jar.JarFile.<init>(JarFile.java:141)
at java.util.jar.JarFile.<init>(JarFile.java:105)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesSupportHandlerImpl.generateWebSupport(WebServicesSupportHandlerImpl.java:79)
at com.sap.engine.services.webservices.server.deploy.preprocess.WebServicesGenerator.createSingleModule(WebServicesGenerator.java:69)
... 26 more
Maybe the used jar files could be the problem?

Steps to create Service Notification in Customer Service Module

Hi,
Can anyone let me know the steps involved and the process to create Service Notification in Customer Service Module.
Regards,
Ram

Hello SAP Guru's,
I am Shankar from chennai.
At present i have assigned to do the Customer Service process for our project.
I had tried the BPP method for doing it.
When i tried the Depot repair process from BPP i got error during billing process.
Can any one guide me with the step by steps procedure to do the senerio.
i searched the web for the process. but i couldnt able to find it.
If any one has the complete step by step procedure to do the process pls help me.
my id is ponshankar gmail com.
Thanks in advance
Warm regards,
Shankar

Image in a SAP module-pool

Hi all,
i hope there is someone can help me.
My problem is: i've to insert an image (.gif or .bmp) in a SAP module pool custom created in SE38.
How can i do it?
Thanks a lots,
regards,
Alex.

SEARCH in SCn before posting you will get so many threads like these.
[Image in module-pool|https://forums.sdn.sap.com/click.jspa?searchID=24201936&messageID=3844659]

Custom logon module not called by the portal

Hi, all.
I need some help urgently on this new portal requirement. There are some sensitive ESS/MSS iviews that we need to give the users an additional logon challenge. The normal ESS/MSS iviews will be using SSO. This one will still use SSO, but have to pass the userid/password challenge.
We have decided to use the authentication scheme. Also, the "form" logon stack has been modified with only one logon module, which is our customized one. To create the java project, jar and library, we are following the link: http://help.sap.com/saphelp_nw04s/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm
Here's the extract of our authscheme.xml:
        <authscheme name="certlogon">
            <authentication-template>
                client_cert
            </authentication-template>
            <priority>21</priority>
            <frontendtype>2</frontendtype>
            <frontendtarget>com.sap.portal.runtime.logon.certlogon</frontendtarget>
        </authscheme>
        <authscheme name="coo_secure">
            <authentication-template>
                form
            </authentication-template>
            <priority>40</priority>
            <frontendtype>2</frontendtype>
            <frontendtarget>com.sap.portal.runtime.logon.basicauthentication</frontendtarget>
        </authscheme>
        <authscheme name="basicauthentication">
            <authentication-template>
                ticket
            </authentication-template>
            <priority>20</priority>
            <frontendtype>2</frontendtype>
            <frontendtarget>com.sap.portal.runtime.logon.basicauthentication</frontendtarget>
        </authscheme>
The authscheme is called coo_secure. When a user clicks on the iviews with the coo_secure authscheme, a userid/pwd prompt pops up. But it does not accept whatever I type in. From the defaulttrace, I do not see any hint that our customized logon module was ever called.
Is there anyway to turn on portal tracing to see what is going on?
Thanks,
Jonathan.

Hi Jonathan,
Did you solved the problem with the custom logon module?
We have a very similar scenario. I followed below help site to implement a custom logon module for particular iviews.
http://help.sap.com/saphelp_nw70/helpdata/EN/54/f91fba71ae48309e4267b4a36fa47b/frameset.htm
and also the documentation:
SAP Netweaver Developers Guide - Integrating Security Functions
But I am not able to get my own custom login module with the custom authscheme running.
If I access my specific IViews that requires additional custom authentication I get the portal login page again. After giving login data I get the error message:
Java iView Runtime
An exception occured while processing your request.
If this situation persists, please contact your system administrator.
If you solved your problem, can you please share the solution with me?
Thanks,
Regards,
Yasar

Error in Custom Function Module

Hi,
I am working on implementing General Ledger Business content in financial Accounting.
We had a requirement of creating a Custom Virtual cube similar to 0FIGL_V10. Hence, we had copied the standard function module RS_BCT_FIGL_DATA_GET_VC10 and created a custom function module. Before doing that, we had copied the function group RS_BCT_FIGL and created a custom function group for the custom function module.Both were activated subsequently. Then, we had created a custom virtual cube (ZFIGL_V10) using the custom function module.
The queries on the Standard virtual cube were migrated to ZFIGL_V10 using the RSZC transaction code. when the queries are executed in RSRT, we get an error message "**An exception with the type CX_SY_DYN_CALL_ILLEGAL_FUNC occurred" and the ABAP debugger is started post that error.
Has anyone faced this problem before?could any of you provide some pointers to it.
Regards,
Sainath

You cannot use the standard function module which is used for standard cube for another cube.
You should not change the function module.
Instead you can make a copy of the function module you are using aand use this copy in ur virtual cube which will work in the same way the actual Fm used to work and it will make you perfrom the changes.
Follow the below steps:
1) Goto SE37 and In the top tool bar click on the copy button which is on right side of delete button.
2) in fr FM give the name of the actual FM and in to Fm give the name of the function module you want to copy.
3) Then click on copy.
4) Now open this new function in edit mode and goto the import/export parameters and check. it will have all the same parameters as the actual FM. Here you can make the changes you want.
5) Now use this FM in your virtual cube and it will be working as per your requirement
https://forums.sdn.sap.com/click.jspa?searchID=9605118&messageID=4999763
Hope it Helps
Chetan
@CP..

Custom JAAS Module - How to use in certification test?

Hello,
I just read the document about certification for custom JAAS modules ("BC-AUTH-SAML Test Plan"). What I don't understand is how our custom login module can get the custom information it needs (like a certain request parameter).
First, what we would like to do is to create a JAAS module which examines proprietary login tickets created by our reverse proxy / authentication server. The example code shows how to retrieve HTTP parameter and headers using the callback methods, so that part is all fine and clear to me.
But for the certification test, the description says that in order to execute the test, the browser must be opened with a certain URL (Test 1, GET w/o password change). That action alone must lead to a valid authentication. However, in your real-world setup, the reverse proxy - sitting between the browser client and the SAP system - would insert a custom HTTP header with the login ticket. Obviously, in the test setup as dictated by the certification document, we don't have our reverse proxy, so my question basically is:
How can I add custom HTTP headers or parameters while running the certification test?

I'd gladly send you something by mail. Two other details first:
- My name is actually not Remo, but Marcel Schoen. I'm just using a company account for this forum. My address is marcel.schoen<at>united-security-providers.ch
- I'm swiss. Do you speak german? Your name sounds german. Falls ja koennen wir das auch auf Deutsch weiter besprechen.
In short, our product is a Web Application Firewall; a reverse proxy for protecting and integrating web applications. Some of the functionality also allows to implement single-sign-on over existing legacy applications with different user bases. And now we're looking into ways to integrate SAP application servers as well (right now, the JAAS module and SAML are the two most likely approaches).

Custom adapter module deployment in PI 7.1

We upgrade XI 3.0 to PI 7.1. However, I dont see SDM directory anymore which is what I had used to deploy my custom adapter module.
Is there a different way to deploy custom adapter module in 7.1? Is SDM discontinued?
When I try to deploy the ear file from NWDS directly I get deployment exception error
"Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !".
I have given the message server host and port correctly in preferences.
I am using NWDS 7 and JAVA SDK 1.4.2.15.
Is there a new procedure to deploy custom adapters in PI 7.1?
Regards
Haseeb

hi,
check this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00838345-708c-2a10-1199-9514c0b0a91c
regards.

Creating a custom java module for excel to xml conversion.

Hi Gurus,
I am creating a custom java module in sap nwds 7.3 for Excel to XML Conversion. But I am getting following error
Classpath dependency validator message.
Classpath entry will not be exported or published. Runtime ClassNotFoundExceptions may result.
I imported the Jars from a different PI system and i am using NWDS in local PC with creating a separate folder with all JARs and also imported them using build path option.
This issue is occuring for all the jars imported.
I am using following code.
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.AbstractTrace;
import java.util.HashMap;
import jxl.Cell;
import jxl.Workbook;
public class JavaMappingExcelToXML implements StreamTransformation{
private Map map = null;
private AbstractTrace trace = null;
public void setParameter(Map arg0) {
map = arg0; // Store reference to the mapping parameters
if (map == null) {
this.map = new HashMap();
public static void main(String args[]) { //FOR EXTERNAL STANDALONE TESTING
try {
FileInputStream fin = new FileInputStream ("c:/ashu.xls"); //INPUT FILE (PAYLOAD)
FileOutputStream fout = new FileOutputStream ("C:/Users/ashutosh.a.upadhyay/My Documents/ashuXML2.xml"); //OUTPUT FILE (PAYLOAD)
JavaMappingXLStoXML mapping = new JavaMappingXLStoXML ();
mapping.execute(fin, fout);
catch (Exception e1) {
e1.printStackTrace();
public void execute(InputStream inputstream, OutputStream outputstream) {
String msgType = "Message Type name will come here";
String nameSpace = "Namespace Name will come here";
String xmldata = "";
try {
Workbook wb = Workbook.getWorkbook(inputstream);
xmldata ="<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n"+ "<ns0:"+msgType+" "+"xmlns:ns0=\""+nameSpace+"\n">";
Cell[] cells ;
Cell[] cellNames ;
cellNames = wb.getSheet(0).getRow(0);
for(int j=1;j<wb.getSheet(0).getRows();j++){
xmldata = xmldata+"\n<Record>\n";
cells = wb.getSheet(0).getRow(j);
for(int i=0;i<wb.getSheet(0).getColumns();i++){
xmldata = xmldata+"\t<"+cellNames[i].getContents()+">"+cells[i].getContents()+"</"+cellNames[i].getContents()+">\n";
xmldata = xmldata+"</Record>";
xmldata = xmldata+"\n</ns0:"+msgType+">";
System.out.print(xmldata);
xmldata.getBytes();
wb.close();
byte by[] = xmldata.getBytes();
outputstream.write(by);
inputstream.close();
outputstream.close();
System.out.println("\n"+"File processed");
catch (Exception e) {
e.printStackTrace();
Request you to guide how to resolve this issue.
Thanks in advance

Hi Gurus,
I am creating a custom java module in sap nwds 7.3 for Excel to XML Conversion. But I am getting following error
Classpath dependency validator message.
Classpath entry will not be exported or published. Runtime ClassNotFoundExceptions may result.
I imported the Jars from a different PI system and i am using NWDS in local PC with creating a separate folder with all JARs and also imported them using build path option.
This issue is occuring for all the jars imported.
I am using following code.
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.AbstractTrace;
import java.util.HashMap;
import jxl.Cell;
import jxl.Workbook;
public class JavaMappingExcelToXML implements StreamTransformation{
private Map map = null;
private AbstractTrace trace = null;
public void setParameter(Map arg0) {
map = arg0; // Store reference to the mapping parameters
if (map == null) {
this.map = new HashMap();
public static void main(String args[]) { //FOR EXTERNAL STANDALONE TESTING
try {
FileInputStream fin = new FileInputStream ("c:/ashu.xls"); //INPUT FILE (PAYLOAD)
FileOutputStream fout = new FileOutputStream ("C:/Users/ashutosh.a.upadhyay/My Documents/ashuXML2.xml"); //OUTPUT FILE (PAYLOAD)
JavaMappingXLStoXML mapping = new JavaMappingXLStoXML ();
mapping.execute(fin, fout);
catch (Exception e1) {
e1.printStackTrace();
public void execute(InputStream inputstream, OutputStream outputstream) {
String msgType = "Message Type name will come here";
String nameSpace = "Namespace Name will come here";
String xmldata = "";
try {
Workbook wb = Workbook.getWorkbook(inputstream);
xmldata ="<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n"+ "<ns0:"+msgType+" "+"xmlns:ns0=\""+nameSpace+"\n">";
Cell[] cells ;
Cell[] cellNames ;
cellNames = wb.getSheet(0).getRow(0);
for(int j=1;j<wb.getSheet(0).getRows();j++){
xmldata = xmldata+"\n<Record>\n";
cells = wb.getSheet(0).getRow(j);
for(int i=0;i<wb.getSheet(0).getColumns();i++){
xmldata = xmldata+"\t<"+cellNames[i].getContents()+">"+cells[i].getContents()+"</"+cellNames[i].getContents()+">\n";
xmldata = xmldata+"</Record>";
xmldata = xmldata+"\n</ns0:"+msgType+">";
System.out.print(xmldata);
xmldata.getBytes();
wb.close();
byte by[] = xmldata.getBytes();
outputstream.write(by);
inputstream.close();
outputstream.close();
System.out.println("\n"+"File processed");
catch (Exception e) {
e.printStackTrace();
Request you to guide how to resolve this issue.
Thanks in advance

Code to retrive the sender and receiver interface names using custome adapter module

Hello Team,
I want to develop an custom adapter module which could retrieve the names of the sender and receiver interfaces of the scenario and for that i am trying to use com.sap.aii.af.service.administration.api.monitoring.ProcessContextFactory.ParamSet but i don't know whether this API will support or not and also i don't know how to develop the code using this API so please suggest me some code for it so that i could retrieve the names.
Thanks you all in advance.
Regards,
Avinash.

Hi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM

Customizing SAP modules

Similar Messages

Maybe you are looking for