Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List.But the Employee is active . Is there any setup for this activity?

Hi,
This is because the query is excluding the current site you are trying to modify since it is actually in the report.
You can include in your query:
or site_id = :Pxx_SITE_ID
Where Pxx_SITE_ID is the item holding the site_id value and xx is your page number.
Thank you,
Erick

Similar Messages

Employee Statement of Earnings form not showing anything..

Employee Statement of Earnings form not showing anything..eventhough the process was completed successfully. No data even if i access through assignment form..
What could be the problem?

1. What legislation?
2. Did you perform any patching prior to running the process?
3. Does the following apply to your situation? Note 335950.1 - Best Practices: Generate Run Balance
Regards,
Greg

Chief HR officer not showing all employees

Dear Experts,
I have setup HR intelligence and i am having a problem in HR Chief Responsibility. The responsibility is not showing complete employees of the organisation(in Overview). Can anybody help me out on this one.
regards,
Muhammad Noman Shafique

Couple of things I can think of -
#1.If you're looking at headcount under a person(manager), make sure all the employees under him have the supervisor data.
Even if one link is broken in the hierarchy, it might not give you the correct headcount.
So just check all the employees whi have no Supervisor and update them.
#2. Same with Location. If you're looking at the employee count per location, make sure the value is populated for all employees.
All the data you see in the Dashboard comes from HRI% views
select * from all_views
where view_name like 'HRIBG%';
select * from all_views
where view_name like 'HRI%';
So you can check the appropriate View and see why the view is not returning data.
Sorry mate, cant be of more help.. Not sure why it isn't showing the data..
Cheers,

TS4050 I am running Windows 8. Although my contacts and notes from my Ipod touch show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered?

I am running Windows 8. Although my contacts and notes from my Ipod touch show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered in trouble shooting articles?

As I mentioned earlier, you have to decide which calendar you want to use. You can either use Google or iCloud, but not both.
If you want to use your iCloud calendar, go to Settings>Mail,Contacts,Calendars>Default Account (in the Calendar section) and set this to your iCloud calendar. After doing so, all new events you add to your calendar will be added by default to your iCloud calendar, and as a result, will appear on icloud.com and your computer (if it is syncing calendars with your iCloud account).
If, on the other hand, you want to use your Google calendar (as it sounds like you are doing with your iPod), simply add the same Google calendar to your phone and your computer.

Enrollment Print Form Not Showing up in ESS

Hi Experts,
I am having an issue with the Benefit's Enrollment form not showing up in the ESS for the Adjustment reasons. We are currently not using the Standard Open Enrollment event, I have created a new Adjust reason 'OPN' for 'OPEN'. Shown below is my launchpad Configuration. Please throw some light on what i missed in my config.
Note: all other functions are working fine for the Adjustment reason Including Confirmation statement.
Adjustment Reason:
LPD_CUST:
Thanks,
Vishnu

It's repeated post. did you check this http://scn.sap.com/thread/3727472

After iOS7 install my iCal entries do not show "created by or edited by". Is there a fix?

After iOS7 install my iCal entries do not show "created by or edited by" also in Twitter I can't see number of retweets or favorites, it's become invisible. Any fixes?

Well seeing as I'm running Lion on 2 GB of RAM, I can't see how upgrading the RAM will make that much of a difference. If you are seeing launch times in minutes, it probably indicates your cache got corrupted by some third party cache cleaning software. To see if some corruption can be fixed, first backup your data:
https://discussions.apple.com/docs/DOC-1992
Then boot in safe mode, holding the shift key. If issues persist in safe mode, run the hardware test that came with your Mac.
http://docs.info.apple.com/article.html?artnum=303081
And if that is unrevealing, and booting into safe mode doesn't solve anything, and you are backed up, try repairing the directory by:
1. Booting into the restore partition with command-R.
2. Selecting the installer's Utilities menu.
3. Selecting Disk Utility
4. Selecting First Aid
5. Selecting the boot partition.
6. Click on repair disk (not repair permissions)
Do NOT proceed with any install itself. Just quit the install program
If the disk is not able to be repaired, purchase Alsoft Disk Warrior, and boot of that to repair the directory.
If it is able to be repaired, and the machine is still slow, I think you may have run into some RAM that is bad, and need to replace it, not add to it.
If Disk Warrior can't repair the hard disk, replace the hard disk itself.

Apps showing in library but not showing up in devices i pod- sync apps list. ...pls help

apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
id: [email protected]

Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
Were the apps purchased fro the same accoubnt signed into in the iPod?
Are the apps compatible witht he iPOd model and iOS version?
Do you have restrictions set that prohibit instaling apps?

Not showing the column name

Hi
I am using jdev 11.1.1.3
.i i dragged an adf table from data control.it has got 3 columns.i changed the name of first column as Lang grades.when i run that it is showing the column name as lang grades.then in that table two fields r mandatory.so in the property inspector i put the show required as true.but after that on running it is not showing the column name as lang grades.there is only the star sign for showing the attribute as required only.

Hi,
not enough information. So from your description, a column that is not marked required on its cell renderer component is not displayed at runtime. I am not aware of such a problem and suggest to try a later version of 11g R1 (11.1.1.6) to see if this reproduces. This allows you to exclude a probelm with 11.1.1.3 only
Frank

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

HT202639 Why My iPhone 4 Not Showing A Network Name So i Could Connect To Wifi ?

Why My iPhone 4 Not Showing A Network Name So I Could Connect To Wi-Fi ?

Hello Lil Bizz,
Welcome to the Apple Support Communities!
I understand how frustrating it can be when Wi-Fi on your iPhone is not working as you would expect. In this situation, I would recommend the steps in the attached article to help troubleshoot this situation.
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Best regards,
Joe

Terminal not showing machine's name. Why?

Hi,
Terminal not showing machine's name. Why?
Before I used to have "Martin Parris’s iMac:" on the prompt. Now, I always have this "unknown..." line. Anybody know why and how to fix it?
Cheers
MPAC

The default PS1 prompt variable ha \h in it which the bash shell substitutes the hostname, however, bash determines the hostname by first taking you IP nn.nn.nn.nn address and doing a reverse DNS lookup. If bash gets a value back, no matter what it is, even unknown, bash uses that value. If the Mac OS X lookup does not get a response from the DNS servers, Mac OS X will use your System Preferences -> Sharing -> Computer name.
In your cast, it appears a DNS server is returning unknown
You can set your PS1 prompt to whatever you want. See "man bash" and look for 'prompt'
You could also search the forums for 'PS1' and find similar discussings on the Terminal and your prompt.

Text Entry Box not showing all text

I am creating a simple exercise where I would like the user to copy text from the course, paste it into word, and report back what the word count is. I thought perhaps the Text Entry Box would be the best way to go, since if you click on the existing (default) text, you can copy it. However after I place the paragraph of text in the box, and resize in the editor so that all the text shows, it does not show all the text when playing back, either previewd or published. It only shows the last few words of the last line at the top of the box.
Is there something I am missing? Or, is there an easier/better way to do what I need?
Thanks

Hi all
If this is Captivate 4, there may not be any need for a widget to do this. I'm guessing you haven't tried enabling the Scroll Bar for the Text Entry Box (TEB)?
When I just plop a TEB on a slide, I get this in edit view:
During playback it looks like this:
But if I edit the TEB properties and enable the Show Scrollbar option:
I get this in the output:
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Update number of hrs in OTL TimeKeeper Entry Form not working using API

Hi,
Say for example Employee working hrs are 8/day, I have entered manually in Timekeeper's entry form as follows and submitted and changed status to "approved"
16-aug-2010 17-aug-2010 18-aug-2010 19-aug-2010 20-aug-2010 21-aug-2010 22-aug-2010
8 8 8 3 8
so i need to update 19-aug-2010 to 8 using an API, i tried using API but it's not updating can you guys please let me know.
Regards,
Sri

Follow the OTL api guide and check your code. If your code is proper, timecard should get updated properly.
--Shiv

The hit counter button does not show up after publishing page.

I insert the hit counter button to a new blog post and when I publish, the button does not show up.
I would really like to use the counter as this is a blog for a class I am teaching, and I would like to track
student viewing.
Also, sometimes the colors do not publish properly, specifically with links/rollover feature.
Help!
And thanks in advance for all you who know wayyy more than I do! I hope to return
the favor someday.

First, thanks for the quick response Roddy.
Once I posted the question, similar topics came up and what
I did was remove the hit counter, publish the page without the hit counter.
Then inserted the hit counter again and wah-lah!
Thanks for your reply, this information is correct and helpful as well.
Very appreciative!

Main Address in HRMS not showing in Employee Self Service

Hi
The Main Address (primary address) that has been captured in core HR is not pulling through to the employees personal information screen in Employee Self Service. Any ideas as to what the problem could be?
Thanks in advance

According to MetaLink note 278417.1 the cause is that the Addresses were not properly loaded, probably missing out the "Country" field. Addresses without Country field will not show up in SSHR.
"Fix
In the PER_ADDRESSES table if 2 records are compared, i.e one entered for a new address and one for the record loaded thru APIs, then it will be seen that the Country is missing in the record that came thru API.
Customers will need to correct their data in order for the Addresses to appear in SSHR.
Customers can write an update script to update the Country (We do not support this) or update the Country field using the APIs or reload their addresses using API's."

Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

Similar Messages

Maybe you are looking for