D'weaver:Access Denied when attempting to save files-HELP!

This is driving me nuts. Here are some specs:
-Using Dreamweaver CS3
-I am logging in as administrator on IIS6
-Been using a network mapped directory to accesss files (always worked before)
-Tried setting up RDS (get error <h1>Bad Request (Hostname invalid)</h2>
-Went back to using network mapped directory now I get "Access Denied" error message
-Checked access permissions in wwwroot directory on server and all set to "Administrator (Full) Permissions
Questions
1) Does Dreamweaver reset permissions on files when RDS setup is attempted?
2) If so-how do I reverse this?
3) Does RDS create changes in the Windows Registry that I need to remove?
Really need help as my production schedule is seriously falling behind. I work for myself and ANY work I get right now is keeping me in my house.
Thanks in advance for any help.

Me too..!
are getting the access denied message when trying to save files in DW. Also the file in gone...
But only on some files.
Has anyone come up with a solution or workaround? It's making us crazy and slowing down our work significantly.

Similar Messages

'Access denied' when attempting to build/burn DVD, please help, urgent/desperate!

Recently bought CS3, overjoyed with most of it. Encore is giving me serious trouble though at the moment! The problem is that it simply will not burn to a dual layer disc! When we try to burn it to disc it begins the process, wizzing through different elements, then when it gets to 'sorting files'it stops with the message 'Access Denied' If we split the Wedding video in half it will burn to a standard DVD, but it will not burn to dual layer.We installed an additional, external writer in case the problem was with the hardware, but again it would not burn to dual layer. We attempted to build the dvd as an 'image' to the harddrive to then burn to dual layer through nero. This worked for a much smaller file, but when we tried to burn the larger file to the harddrive as an Image, 'Access Denied'!! We've tried everything we can think of, ...but if anyone else can think of a way to fix this, please let us know as we are in the final stages of the video project for a client and simply cannot get the project onto disc! When we 'check project', there are no errors listed. We've tried transcoding it to 7gb 1pass, and importing it from Premire pro without transcoding it, thereby letting Encore set the settings, but no joy. Thanks, Justin.

Rather than disabling UAC (or turning it down in Win7), just run Encore as Administrator. Right-click, and select Run As Administrator. Works fine for me in Windows 7 Professional 64 bit. Doing it this way you still get the benefits of UAC.

Access denied when copying to Program Files (x86)

Hi, I'm trying to get a third party application to run properly in our environment. It's on a server2102R2 machine in a domain running at the 2008 functional level. In an effort to provide support, the vendor of the application wants to copy
a few dll files into the application folder in Program Files (x86). Whenever we try to do so, we get an access denied error. In an attempt to get these files to go, I have set the following local group policies: In an effort to allow
access to the Program Files (x86)\Siriusware folder for copying files (and potentially updating this application), the following settings have been changed in local group policy:
1. User Account Control: Behavior of the elevation prompt for administrators – *Elevate without prompting*
2. Detect application installations and prompt for elevation –*Disabled*
3. Run all administrators in Admin Approval Mode – *Disabled*
I have also tried adjusting permissions at the folder level, but neither of these actions have had any effect; I still cannot copy files into this subdirectory of Program Files (x86).
I understand that the built in administrator account may have access to this directory, but I'm not sure this will work in the long-term, because I'm not sure how this will affect the future updating of the app.
If someone knows of a way to work around this, please let me share. Also, if someone could point me to documentation on permissions and the UAC as it pertains to moving files around in modern server operating systems, please share.
Thank you,
Kevin

You might forward this link to the vendor.
The Application Certification Program for Windows Server 2012
R2
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Access Denied When Attempting to Deploy an SQL Report Built in VS

------ Deploy started: Project: SQL Reports, Configuration: Debug ------
Deploying to http://localhost:82/ReportServer
Error rsAccessDenied : The permissions granted to user 'ALLIEDFIT\rculver' are insufficient for performing this operation.
Where exactly is the access denial occurring? I have full control on the report folder where the Visual Studio project is. With SQL Reporting Services handling the URLs, frankly I'm not sure where the deployment is trying to put
the report.
Thanks.
Ross

The Reporting Services error rsAccessedDenied occurs
when a user does not have permission to perform an action. May be do not have a role assignment that allows to open a report or did not open browser with the required permissions.
Permission to access report server content and operations are granted through role assignments. On a new installation,
only local administrators have access to a report server. To grant access to other users, a local administrator must create a role assignment that specifies a domain user or group account, one or more roles that define the tasks the user can perform, and a
scope (usually the Home folder or root node of the report server folder hierarchy). You can use Report Manager to create the role assignments
Hope this Helps

Most programs crash when attempting to save

Hello. I'm hoping someone can solve this very annoying issue.
When attempting to save files while in programs such as Safari, TextEdit, Script Editor, and even 3rd party apps such as ReallySimpleText.app, the program hangs for a short time then crashes. Word and FireFox seem to be okay, however.
Does anyone have any ideas? This issue is quite debilitating.
Console.app only shows the generation of the CrashReport as well as a statement that the program exited abnormally:illegal instruction.

Any ideas? Here is a copy of a portion of the crash report that looked important.
Process: TextEdit [2997]
Path: /Applications/TextEdit.app/Contents/MacOS/TextEdit
Identifier: com.apple.TextEdit
Version: 1.5 (244)
Build Info: TextEdit-2440000~2
Code Type: PPC (Native)
Parent Process: launchd [2878]
Date/Time: 2008-04-02 20:53:27.688 -0700
OS Version: Mac OS X 10.5.2 (9C7010)
Report Version: 6
Exception Type: EXCBADINSTRUCTION (SIGILL)
Exception Codes: 0x0000000000000002, 0x000000009450f94c
Crashed Thread: 0
Thread 0 Crashed:
0 com.apple.AppKit 0x9450f94c +[NSDocument _writeAttributes:toFileAtPath:] + 4
1 com.apple.AppKit 0x943f494c +[NSDocument _finishWritingFileAtPath:byMovingFileAtPath:addingAttributes:error:] + 140
2 com.apple.AppKit 0x943f3968 -[NSDocument _writeSafelyToURL:ofType:forSaveOperation:error:] + 436
3 com.apple.AppKit 0x943f3794 -[NSDocument writeSafelyToURL:ofType:forSaveOperation:error:] + 384
4 com.apple.AppKit 0x943f32d4 -[NSDocument saveToURL:ofType:forSaveOperation:error:] + 172
5 com.apple.TextEdit 0x000086a0 0x1000 + 30368
6 com.apple.AppKit 0x943f2fd0 -[NSDocument _saveToURL:ofType:forSaveOperation:delegate:didSaveSelector:contextInfo:] + 72
7 com.apple.AppKit 0x943f2f70 -[NSDocument saveToURL:ofType:forSaveOperation:delegate:didSaveSelector:contextInfo:] + 624
8 com.apple.AppKit 0x943f2ca8 -[NSDocument _savePanelWasPresented:withResult:inContext:] + 328
9 com.apple.AppKit 0x943f2a4c -[NSSavePanel(NSSavePanelRuntime) _didEndSheet:returnCode:contextInfo:] + 332
10 com.apple.AppKit 0x94354a54 -[NSSavePanel(NSSavePanelRuntime) ok:] + 304
11 com.apple.AppKit 0x941ef3b8 -[NSApplication sendAction:to:from:] + 104
12 com.apple.AppKit 0x941ef2ec -[NSControl sendAction:to:] + 92
13 com.apple.AppKit 0x941ee804 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 1584
14 com.apple.AppKit 0x941ee13c -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 516
15 com.apple.AppKit 0x941eda78 -[NSControl mouseDown:] + 804
16 com.apple.AppKit 0x941ec33c -[NSWindow sendEvent:] + 4512
17 com.apple.AppKit 0x941bf798 -[NSApplication sendEvent:] + 3136
18 com.apple.AppKit 0x9412ca68 -[NSApplication run] + 776
19 com.apple.AppKit 0x940fd444 NSApplicationMain + 440
20 com.apple.TextEdit 0x00001fa0 0x1000 + 4000
Thread 1:
0 libSystem.B.dylib 0x929fb978 machmsgtrap + 8
1 libSystem.B.dylib 0x92a0289c mach_msg + 56
2 com.apple.CoreFoundation 0x96aab618 CFRunLoopRunSpecific + 1828
3 com.apple.CoreFoundation 0x96aabea8 CFRunLoopRun + 60
4 com.apple.DesktopServices 0x93367cf0 TSystemNotificationTask::SystemNotificationTaskProc(void*) + 104
5 ...ple.CoreServices.CarbonCore 0x95e98fc4 PrivateMPEntryPoint + 76
6 libSystem.B.dylib 0x92a3db98 pthreadstart + 316
Thread 2:
0 libSystem.B.dylib 0x929fb978 machmsgtrap + 8
1 libSystem.B.dylib 0x92a0289c mach_msg + 56
2 com.apple.CoreFoundation 0x96aab618 CFRunLoopRunSpecific + 1828
3 com.apple.CoreFoundation 0x96aabea8 CFRunLoopRun + 60
4 com.apple.DesktopServices 0x93367e6c TFSEventsNotificationTask::FSEventsNotificationTaskProc(void*) + 176
5 ...ple.CoreServices.CarbonCore 0x95e98fc4 PrivateMPEntryPoint + 76
6 libSystem.B.dylib 0x92a3db98 pthreadstart + 316
Thread 3:
0 libSystem.B.dylib 0x92a0238c _semwaitsignal + 12
1 libSystem.B.dylib 0x92a3ef40 pthread_condwait + 1580
2 ...ple.CoreServices.CarbonCore 0x95e9b1d4 TSWaitOnCondition + 132
3 ...ple.CoreServices.CarbonCore 0x95e795c0 TSWaitOnConditionTimedRelative + 204
4 ...ple.CoreServices.CarbonCore 0x95e9ad90 MPWaitOnQueue + 272
5 com.apple.DesktopServices 0x933738e8 TNodeSyncTask::SyncTaskProc(void*) + 88
6 ...ple.CoreServices.CarbonCore 0x95e98fc4 PrivateMPEntryPoint + 76
7 libSystem.B.dylib 0x92a3db98 pthreadstart + 316
Thread 4:
0 libSystem.B.dylib 0x929fb9f8 semaphoretimedwait_signaltrap + 8
1 libSystem.B.dylib 0x92a3ee3c pthread_condwait + 1320
2 ...ple.CoreServices.CarbonCore 0x95e795e4 TSWaitOnConditionTimedRelative + 240
3 ...ple.CoreServices.CarbonCore 0x95e9ad90 MPWaitOnQueue + 272
4 com.apple.DesktopServices 0x9337ac84 TPropertyTask::PropertyTaskProc(void*) + 100
5 ...ple.CoreServices.CarbonCore 0x95e98fc4 PrivateMPEntryPoint + 76
6 libSystem.B.dylib 0x92a3db98 pthreadstart + 316
Thread 5:
0 libSystem.B.dylib 0x92a3d3d8 kevent + 12
1 com.apple.CoreFoundation 0x96a82ed4 _monitor_file_descriptor_ + 88
Thread 6:
0 libSystem.B.dylib 0x92a60004 select$DARWIN_EXTSN + 12
1 com.apple.CoreFoundation 0x96ab6a68 __CFSocketManager + 764
Thread 7:
0 libSystem.B.dylib 0x92a02388 _semwaitsignal + 8
1 libSystem.B.dylib 0x92a0219c nanosleep$UNIX2003 + 188
2 libSystem.B.dylib 0x92a020cc usleep$UNIX2003 + 68
3 com.apple.AppKit 0x9418f018 -[NSUIHeartBeat _heartBeatThread:] + 1840
4 com.apple.Foundation 0x917064f4 _NSThread__main_ + 1004
5 libSystem.B.dylib 0x92a3db98 pthreadstart + 316
Thread 8:
0 libSystem.B.dylib 0x929fb9f8 semaphoretimedwait_signaltrap + 8
1 libSystem.B.dylib 0x92a3ee3c pthread_condwait + 1320
2 ...ple.CoreServices.CarbonCore 0x95e795e4 TSWaitOnConditionTimedRelative + 240
3 ...ple.CoreServices.CarbonCore 0x95e9ad90 MPWaitOnQueue + 272
4 com.apple.DesktopServices 0x933755a8 TFolderSizeTask::FolderSizeTaskProc(void*) + 88
5 ...ple.CoreServices.CarbonCore 0x95e98fc4 PrivateMPEntryPoint + 76
6 libSystem.B.dylib 0x92a3db98 pthreadstart + 316
Thread 0 crashed with PPC Thread State 32:
srr0: 0x9450f94c srr1: 0x0208f030 dar: 0x037151c4 dsisr: 0x42000000
r0: 0x943f4950 r1: 0xbfffdfb0 r2: 0xa06a6924 r3: 0x0001aae8
r4: 0x947f1a48 r5: 0x04e55910 r6: 0x04e3b150 r7: 0x00000005

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

I am getting an error when attempting to save or export a PDF to Word

When attempting to save as OR export a PDF document to Word, I am getting the following error: Bad PDF, error in processing fonts. <cannot find CMap resource file>. Does anyone know how to fix this? I also attached an image of the error pop up.

There are some preflight scripts to fix errors in a PDF. You might try those, particularly for fonts. An alternative is to refry the PDF by printing to a new PDF and then trying to save that to WORD.

Get "Access Denied" when click open a PDF file

Hi Friends,
Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
Can anyone face the same issue please help me.
Thanks,
Tiru
tirupal

Hi,
If you are able to open the same document earlier,then anonymous access enabled on your doc library then.
If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
Murugesa Pandian.,MCTS|App.Development|Configure

Access Denied when Student Uploads Course in Drop Box

All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
The SPC16001002134 is the course identifier.
Access to the course for student is set to download:
Access Level: Download
Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
Group Access Label: Student

Hi,
I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
Thanks.

When attempting to "save as" a word document and selecting micrsoft word as the "save as type", it no longer will save it in a word icon document, the icon is just a blank document symbol and thus cannot email this document as before.

when attempting to "save as" a word document and selecting micrsoft word as the "save as type", it no longer will save it in a word icon document, the icon is just a blank document symbol and thus cannot email this document

Here are my two cents.
The resources defining the file formats which Pages may import or export are stored in the file :
Macintosh HD:Applications:iWork '09:Pages.app:Contents:Info.plist
Assuming that you didn't installed the Developer tools, go to my iDisk (address below)
Download :
Pref Setter.app.zip
Unpack the archive.
Open the file "Info.plist" with Pref Setter.
Open the entry entitled : CFBundleDocumentsTypes
Open the items 9, 10, 11, 12
The normal contents is :
Double check the parameters available for items 9 & 10.
What you get may be linked to some oddity in these resources.
Yvan KOENIG (VALLAURIS, France) samedi 1 octobre 2011 18:00:23
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Error when attempting to Save as... in CS5

Hello,
Occasionally when attempting to Save as... in CS5 it will give me an error saying that the file doesn't exist and to verify the filepath and try again. We are attempting to save to an external hard drive which is close to full but not completely. But, if I restart my machine the issue seems to go away for awhile. Is this a problem with PS or is it just because the hard drive is full or something else entirely? Seems like a strange error, has anyone else experienced this?

A local hard drive or across network?
The missing disk space may be an issue as Photoshop may need "double" the file’s size when saving (a safe save, the original file is removed after the new file has been saved, which is intended to make sure the file is not damaged if a crash occurs during saving).
Please read these:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

When attempting to save a numbers doc, get message, " Couldn't auto-save document."

When attempting to save a Numbers checklist document, I get the message "Couldn't auto-save document." What does this mean and why can't I save it to my hard drive?

I have exactly the same problem. It seems like a very rare problem though because there is so little written about it, and it is a real show stopper!!
I also had the additional problem that I could not export anything as PDF.
Your workaround did not work for me, but a different one did. I simply clicked on the red "close" button on the top left of the window, and the usual dialog box asked me if I wanted to save. I said yes, and it saved! I can even export the PDF now.
Extremely bizarre, and I must say not a solution I would rely on in a long term basis.

Access denied when using Desktop-API

Hi to all,
I have a client app that is launched using JWS. In my JNLP file I declared:
<security>
     <j2ee-application-client-permissions/>
</security>
and all jar-files are signed with the same certificate. This is working fine, but when I try to use the Desktop-API to open a folder on clients machine
Desktop.getDesktop().open(new File("/path/to/dir"));
it gives me
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.awt.Desktop.checkExec(Unknown Source)
     at java.awt.Desktop.open(Unknown Source)
I even tried with
<security>
     <all-permissions/>
</security>
in JNLP. But it gives me the same Exception. I also tried to use a PrivilegedAction to make SecurityManager not check permissions, but it didn't help. At last thought about having my own policy-file. But I don't know how to tell the JWS app to use it.
Thanks for help in advance
Christian

Hi to all,
Deleting the cache works fine. But only for one start.
I found the JNLP in the cache has been automatically updated with the line
<update check="timeout" policy="always"/>
I thought this could be the problem, because if may be the SecurityManager finds JNLP in the cache being different from that one on the server, it "thinks" it has been hacked?
To avoid this difference, I added the line right from the beginning, but that didn't help.
BTW I signed all my jars, but the JNLP-File is just provided in the working dir of the app unsigned. Somewhere I read about JNLP-Files also signed. May be I have to sign it, too, or is it possible to have it packed in my application jar (then it will be signed with it)?
Thank for any hints
Christian

Access Denied when saving in Vista

Hello everyone,
On some occasions, when I'm editing my website and saving a CSS file a message popups saying access to the file is denied. If I try to delete or rename the file with Windows Explorer it also says access denied. It seems the file is locked because I cant open it in any program, delete it or rename it.
After about 10 minutes, the file is back to normal. Im on Windows Vista, with Dw Cs4 and I use Firefox to test my website.
I've tried to take permission of the folder and Dreamweaver isnt saving using a temp file. Anyone have any ideas?
Thanks

This is a "feature" of Vista's security system. The solution is in the reply from Badcrew in the following page: http://thevistaforums.com/index.php?showtopic=13343.
How did I find the answer? By typing access denied vista into the Search Forums field at the top right of this page. The search system in this forum is quite powerful, so it's always worth trying.

ORA-31050: Access denied when try to register XMLSchema

Dear All
I got ORA-31050: Access denied
when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
Can you advise me what privilege should I grant to the user?
I tried grant XDBADMIN role but it does nto help
Thank you in advance
Artem Rodin

Dear Mark!
I realy need you help!
I can successfully register schema which has complexType declaration as root element, like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>

</schema>
But I failed if in the root there is element like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>
<element name="PurchaseOrder" type="po:PurchaseOrderType"/>
</schema>
I got the following error stack
ORA-01031: insufficient privileges
ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
ORA-06512: at “XDB.DBMS_XDBZ”, line 6
ORA-06512: at line 1
ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
ORA-06512: at line 7
I guess you can reproduce this in-house,
It's not my schema it is taken from
XML Database Developer’s Guide - Oracle XML DB
Structured Mapping of XMLType 5-3
Example 5–1 XML Schema Definition, po.xsd
As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
This issue has become critical for me, so I am highly appreciate any assistance
Many thanks in advance
Best regards
Artem Rodin

D'weaver:Access Denied when attempting to save files-HELP!

Similar Messages

Maybe you are looking for