DAC and Informatica 8.6.1 installation and configuration on Linux (64 bit)
Hi Hussien,
I saw some very good post by you regarding installing, setting up and configuration R12 , OBIEE, DAC 10.13.4 , Informatica 8.6.1 on Windows. I am looking installation and configuration of Informatica and DAC installation on Linux 64 bit platfrom. I have already running R12 and OBIEE instances on Linux 64 but now need to configure the Informatica and DAC.
I find some starting steps and documentation from the web but your expert advises and reference Notes are awesome so looking for that.
Regards
-Samar-
Samar,
I do not have specific document for DAC installation, but I would suggest the following links/docs:
Oracle Business Intelligence Data Warehouse Administration Console Introduction
http://download.oracle.com/docs/cd/E12513_01/doc/index.htm
System Requirements and Supported Platforms Guide for Oracle Business Intelligence Applications 7.9.6.1
http://download.oracle.com/docs/cd/E14847_01/bia.796/e14221.pdf
Note: 1082987.1 - ALERT: Required and Recommended Patch Levels For OBIEE 10.1.3.x Versions
Note: 981452.1 - INFORMATICA 8.6.1 CONFIGURATION ISSUE FOR ORACLE BI APPLICATION 7.9.6.1
Thanks,
Hussein
Similar Messages
-
Installing Informatica powercenter 9.0.1HF2 client tools on Linux 64 bit
Hi all,
I'm building OBIA 7963 on Linux x86-64but server.
do we have Informatica powercenter client tools installables for Linux 64bit? if not please guide me how to proceed for this.
Thanks
RamHi Ram
please follow the below procedure to install the informatica in LINUX
PowerCenter - Installation and Configuration (9.0.1 for OEL Linux 64Bit)
This article talk about the installation of PowerCenter from Informatica on:
• Oracle Entreprise Linux 64 bit version 5 Update 5
• Oracle Database 11gR2
After you complete the installation and configuration process, you have to log in to the Administrator tool to create and configure the following services:
• PowerCenter Repository Service
• PowerCenter Integration Service
Oracle Database
parameter
Set the open_cursors parameter to 1000
SQL> SHOW parameter open_cursor;
NAME TYPE VALUE
open_cursors integer 300
SQL> ALTER system SET open_cursors=1000;
System altered.
SQL> ALTER system SET open_cursors=1000 SCOPE=BOTH;
System altered.
SQL> SHOW parameter open_cursors;
NAME TYPE VALUE
open_cursors integer 1000
Repository Account
At least two database user accounts are required to host this repository :
• POW_REP for the repository Database
• POW_DOM from the domain Configuration Database
with the CONNECT, RESOURCE, and CREATE VIEW privileges.
For Oracle, you must perform the following instruction :
CREATE USER POW_REP IDENTIFIED BY POW_REP
DEFAULT tablespace users
TEMPORARY tablespace temp
quota unlimited ON users;
GRANT CONNECT, resource, CREATE VIEW TO POW_REP;
CREATE USER POW_DOM IDENTIFIED BY POW_DOM
DEFAULT tablespace users
TEMPORARY tablespace temp
quota unlimited ON users;
GRANT CONNECT, resource, CREATE VIEW, SELECT ANY dictionary TO POW_DOM;
The grant “select dictionary privilege” to the user POW_DOM is only needed to verify the parameter Open_Cursor during the prerequisite check.
Repository Tablespace
Set the storage size for the tablespace to a small number to prevent the repository from using an excessive amount of space.
Also verify that the default tablespace for the user that owns the repository tables is set to a small size. The following example shows how to set the recommended storage parameter for a tablespace named POWERCENTER_DAC.
ALTER TABLESPACE "POWERCENTER_DAC" DEFAULT STORAGE ( INITIAL 10K NEXT 10K MAXEXTENTS UNLIMITED
PCTINCREASE 50 );
Operating System
Login as root
Processor
Verify that the process match the software (x86_64)
[root@di-obia-01 ~]# uname -p
x86_64
[root@di-obia-01 ~]# uname -orv
2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 GNU/Linux
Temporary Disk Space Requirements
The installer writes temporary files to the hard disk. When the installation completes, the installer deletes the temporary files and releases the disk space.
Installer UNIX 1 GB
Informatica Services UNIX 2 GB
Verification of the temporary space with the df commando: Linux - disk free command (df)
[root@di-obia-01 ~]# df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
77G 16G 58G 22% /
User Account
On UNIX, create a user account specifically to run the Informatica daemon.
[root@di-obia-01 ~]# /usr/sbin/useradd powercenter
[root@di-obia-01 ~]# id powercenter
uid=502(powercenter) gid=506(powercenter) groups=506(powercenter)
[root@di-obia-01 ~]# passwd powercenter
Changing password for user powercenter.
New UNIX password:
BAD PASSWORD: it is WAY too short
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
Port
Verify that the port numbers are available on the machines where you install Informatica Services.
[root@di-obia-01 ~]# netstat -tulpn|grep 6005
The installer validates the port numbers that you specify to ensure that there will be no port conflicts in the domain.
Environment Variables
Use LANG and LC_ALL to set the UNIX code page for the installer.
File Descriptor
Informatica service processes can use a large number of files. Set the Linux - File Descriptor limit per process to 3000 or higher.
In the file /etc/security/limits.conf, add this line:
# PowerCenter
powercenter hard nofile 3001
powercenter soft nofile 2500
And verify with the ulimit function logged as the powercenter system user account:
[powercenter@di-obia-01 ~]$ ulimit -Hn
3001
Note:The limit is set to 3001 to prevent an error with the value 300 during the prerequisites check
Installation directory and Permission
As root, create the installation base directory:
mkdir -p /powercenter/9.0.1
chown -R powercenter:powercenter /powercenter
chown -R powercenter:powercenter /powercenter/9.0.1
chmod -R 775 /powercenter
chmod -R 775 /powercenter/9.0.1
As the installer (powercenter), copy the file to a tmp directory, unzip and untar it:
[powercenter@di-obia-01 powercenter901]$ unzip V26109-01.zip
Archive: V26109-01.zip
inflating: 901HF2_Server_Installer_linux-x64.tar
[powercenter@di-obia-01 powercenter901]$ tar -xf 901HF2_Server_Installer_linux-x64.tar
Change the permission of the file install.sh to execute
chmod -R 744 /tmp/powercenter901/install.sh
Server
Pre-Installation System Check
To verify whether a machine meets the system requirements for an Informatica installation, run the Pre-Installation System Check Tool (i9Pi) before you start the installation process.
You can find the i9Pi tool in the following directory: <InstallerExtractDirectory>/i9Pi
[powercenter@di-obia-01 i9Pi]$ ./i9Pi.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Enter the port 6004 to prevent a problem during the ckeck on the port 2010. The tool normally must verify until the port 6009 but check also the port 6010 which is the standard port for X Forwarding
A pdf is available in the tool directory if you want more information.
The report files are stored in the directory where you extract the Pre-Installation System Check tool files:
• HTML format: <i9Pi Directory>/i9Pi/i9Pi_summary.html
• Text format: <i9Pi Directory>/i9Pi_summary.log
i9Pi_summary.log
Output - Informatica9 Installation Location:/
Informatica starting port number:6004
Database Type:ORACLE
Database Hostname:di-rep-db
Database Port number:1521
Database Service name:direp.hotitem.local
Database User ID:POW_DOM
PASSED: OS Version Check: RHL Version Identified is 2.6.18-194.el5
PASSED: Diskspace: Available DiskSpace is 55105 MB
PASSED: Processors: Available Processors is 2
PASSED: Physical Memory: Available RAM Size is 4242 MB
PASSED: Temporary Space: Available temporary diskspace: 55105 MB. Sufficient for installation
PASSED: Socket Port: Socket port Range 6004-6009
PASSED: LANG Environment Variable: LANG Set to en_US.UTF-8 and LC_ALL Set to null
PASSED: JRE_HOME Environment Variable: JRE_HOME is not set
PASSED: File Descriptors : File descriptors limit is 3001
PASSED: Oracle Open Cursors: Open cursors in Oracle database is set to 1000Sufficient for install
PASSED : Resource privilege : The user account has the RESOURCE privilege.
PASSED: Create Table check : Successfully created a database table.
PASSED: Create View : Successfully created a database view.
Initial Server Software Installation
This sequence of installation don't say that you have to hit the next button and does not take care of review and informative windows.
[powercenter@di-obia-01 /]$ unset JRE_HOME
[powercenter@di-obia-01 /]$ /tmp/powercenter901/install.sh
OS detected is Linux
unjar task is in progress.............
You can wait a long time on this step ….
unjar of ESD completed.....
Do you want to continue installation (y/n) ?
y
Starting installation ...
\* Welcome to the Informatica 9.0.1 HotFix 2 Server Installer. *
To verify whether a machine meets the system requirements for an Informatica installation, run the
Pre-Installation System Check Tool (i9Pi) before you start the installation process. You can find the i9Pi
tool in the following directory: <InstallerExtractDirectory>/i9Pi
Before you continue, read the 9.0.1 HotFix 2 Installation Guide and Release Notes.
You can find the 9.0.1 HotFix 2 documentation in the Documentation Center at http://my.informatica.com
Configure the LANG and LC_ALL variables to generate appropriate code pages and
create and connect to repositories and Repository Services.
Do you want to continue? (Y/N)Y
Installer requires operating system Linux version 2.6 and later.
Current operating system Linux version 2.6.
Current operating system meets minimum requirements.
Select a choice :
1. Install Informatica 9.0.1 with Hot Fix 2 or Upgrade from a previous version of Informatica to
Informatica 9.0.1 with Hot Fix 2
2. Apply Informatica 9.0.1 Hot Fix 2 to existing 9.0.1 install.
Enter the choice(1 or 2):1
Checking for existing 9.0.1 HotFix 2 product installation.
Select (G)UI mode (needs X Window support) or (C)onsole mode (G/C):G
Launching installer in GUI mode ...
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Preparing SILENT Mode Installation...
===============================================================================
Informatica 9.0.1 Services HotFix2 (created with InstallAnywhere)
Informatica 9.0.1 HotFix 2 Steps:
• Installation Type: Install (and not upgrade)
• Pre-requisites: Next
• License and Directory. (Transfer the license file from the client zip file)
• Pre-Installation Summary: Install (Required Disk Space 2815 MB)
• Domain Creation: Create a domain
• Configuration Database
with as JDBC parameters:
MaxPooledStatements=20;CatalogOptions=0;BatchPerformanceWorkaround=true
• Domain Configuration
• Port Configuration
• Post-Installation Summary
Installation Status:: SUCCESS
The Informatica 9.0.1 HotFix 2 installation is complete.
For more information, see the debug log file:
/powercenter/Informatica/9.0.1/Informatica_9.0.1_Services_HotFix2.log
Informatica Administrator Home Page http://di-obia-01.hotitem.local:6007
Product Name : Informatica 9.0.1 HotFix 2
Installation Type : Fresh Installation
Installation Directory : /powercenter/Informatica/9.0.1
• Login to the Administration console with the Administrator user (Administration/Administrator)
Repository Configuration
• Start Informatica services. Start > All Programs > Informatica PowerCenter 8.6.1 > Services > Start Informatica Services.
• Launch the Administration console. Start > All Programs > Informatica PowerCenter 8.6.1 > Services > PowerCenter Administration Console
• Login with the account given in the configuration (admin/admin for this article).
• Select configuration assistant (if you don't see it, you can also configure a repository with the configuration tool on the left side)
• Welcome > Next
• Enter a name for the repository, click on the configure button and fill in the fields. You must enter a connect identifier and not a connect string. The connect string for Oracle contains the credentials.
If the creation of the repository hang, try to give the DBA privileges to the oracle database account POW_REP
• Integration service: fill a name in : INT_OBIA7961 and click next.
• Character Data for Integration service: (Note: Character Encoding give the choice between ASCII and Unicode)
• Finish !
A global administrator (for the domain and the repository) is automatically created during the installation with the credentials Administrator/Administrator. You may change the password for security purpose
Client
Installation Steps:
• Double click on the file install.bat located in this directory : File1\pc861_client_win32_x86\
• Choose Language. Next
• Choose Install Option. Next
• Prerequisites. Next
• Installation directory For the path, you can leave the default value because it doesn't contain space C:\Informatica\PowerCenter8.6.1
• Pre-installation summary. Next
• Post-installation summary. Next
• Installation Complete. Done
Hot Fix 10 installation:
• file2>pc861_HotFix10_Client\install.bat
• Select Language. Ok
• Welcome. Next. Stop PowerCenter. Ok
• Installation Prerequisites. Next
• Installation Type: Apply. Next
• Installation Directory. Next
• Pre-installation summary. Next
• Post-installation summary. Next
• Installation Complete. Done
It will install :
• PowerCenter - Client
o PowerCenter - Designer
o PowerCenter - Repository Manager
o PowerCenter - Workflow Manager
o PowerCenter - Workflow Monitor
o PowerCenter Mapping Architect for Visio (Data Stencil?)
• Custom Metadata Configurator
The metadata manager console is not installed as in the installation of the version 8.1.1.
Support
The creation of the repository hangs
The creation of the repository can take maximum 2 minutes.
If you don't see the creation of tables in the POW_REP schema:
• close the browser,
• connect again to the administation console and go through the configuration button in the left upper side
If it doesn't work
• give the DBA privileges to the oracle database account POW_REP
• and try to create it again
Thanks and Regards
Vidya Reddy -
Upgrade 11.5.10.2 to R12 and migrate from linux 32-bit to linux 64-bit
Dear all ,
I have two servers :
1. OS . Redhat 4 32-bit have the EBS 11.5.10.2 .
2. OS . Oracle Linux 5.3 64-Bit have the DB 10.2.0.5 .
i want to upgrade the EBS to R12 and migrate it on another server 64-Bit .
Can you provide me please with the steps for this with the notes number.
and should i run the upgrade first or migrate first.
should i download R12 32-bit or 64-bit for linux .
where should i run the rapidwiz .
Note : the DB will stay on the same server and wont change anything on it.
Thanks. waiting your reply.965322 wrote:
Dear all ,
I have two servers :
1. OS . Redhat 4 32-bit have the EBS 11.5.10.2 .
2. OS . Oracle Linux 5.3 64-Bit have the DB 10.2.0.5 .
i want to upgrade the EBS to R12 and migrate it on another server 64-Bit .
Can you provide me please with the steps for this with the notes number.
and should i run the upgrade first or migrate first.
should i download R12 32-bit or 64-bit for linux .
where should i run the rapidwiz .
Note : the DB will stay on the same server and wont change anything on it.
Thanks. waiting your reply.I would suggest the following:
1) Upgrade the database to 11.2.0.3
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) [ID 881505.1]
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
2) Install R12 (64-bit) and upgrade to 12.1.1 on Node 1 after you install a 64-bit OS
Oracle E-Business Suite Installation Guide Using Rapid Install
http://docs.oracle.com/cd/E18727_01/doc.121/e12842/toc.htm
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
3) Upgrade to 12.1.3
Oracle E-Business Suite Release 12.1.3 Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_1213_available
Note: Please make sure you back up your 11i Apps tier files before you install 64-bit OS on Node 1. In case you have CUSTOM_TOPs you need to copy them to Apps R12 Apps tier (APPL_TOP) which can done before or after the upgrade.
Thanks,
Hussein -
Getting error while installation of SAP on Linux 64 bit
Dear All,
me using redhat version 5
database 10g
Proceded installtion through VNC. while installation of oracle 10g getting some eror at 83% details mention below.
Error in invoking target 'ntcontab.o' of makefile
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/SOL/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-06-18_09-13-18AM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: ''/oracle/SOL/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
'/oracle/SOL/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /'/oracle/SOL/102_64/lib/ntcontab.o
mv ntcontab.o '/oracle/SOL/102_64/lib/
/usr/bin/ar rv'/oracle/SOL/102_64/lib/libn11.a '/oracle/SOL/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: line 2: gcc: command not found
INFO: mv: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO: /usr/bin/ar: '/oracle/SOL/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile ''/oracle/SOL/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-06-18_09-13-18AM.log' for details.
Exception Severity: 1
Request you to revert as soon as possible.
ThankYou in AdvanceDear,
Thanks for your replay.
command to check gcc version :
RPM -qa | grep gcc
Output of this command.
compact-gcc-34-g77-3.4.6-4
libgcc-4.1.2-46.el5
comact-gcc-34-c++-3.4.6-4
libgcc-4.1.2-46.el5
compact-libgcc-296-2.96-138
compact-gcc-34-3.4.6-4
pleae suggest if any updated version of gcc i have to installed or is this OK.
I have ignore that error and click on continue after that my installation is finished sucessfull
i have encounter one more problem
ogon as root
/oracle/oraInventory/orainstRoot.sh
/oracle/<SID>/102_64/root.sh
[root@ram 102_64]# ./root.sh
./root.sh: line 12: 01777: command not found
./root.sh: line 13: root: command not found
./root.sh: line 20: 01777: command not found
./root.sh: line 21: root: command not found
./root.sh: line 63: /bin/fmputl: No such file or directory
./root.sh: line 64: /bin/fmputlhp: No such file or directory
./root.sh: line 65: 550: command not found
./root.sh: line 66: 4555: command not found
ln: creating symbolic link `/rdbms/filemap' to `/opt/ORCLfmap/prot1_64': No such file or directory
.then getting error on create database at 13 phase
checked ora_sql_result.log
SAPINST: Emd of output of SQL executing program /oracle/SOL/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST the current process environment may be foun din SAPINST_ORA_ENVIRONMENT.log .
SAPINST Oracle stop logging
REquest you to please provide solution Asap.
Thanks
In Advacbe
Anant singh -
BI Apps - Financial Analytics (DB connection DAC and Informatica Designer)
Hi all,
With correct Physical data sources configured in DAC including production JDE database (Oracle) and Datawarehouse, the ETL process can be finished in DAC without error. However, the datawarehouse tables do not contain any records after the ETL.
Thus I open the Informatica Client - Workflow Designer, and go to menu Connections -> Relational. I found that the user name supplied for JDE data source is DEV user, not the production user. Is it the cause that ETL executed in DAC cannot populate records to datawarehouse tables?
Is there relationshiop between settings in DAC and Informatica Workflow Manager even though correct configuration is done in DAC?
Regards,
SeanWith correct Physical data sources configured in DAC including production JDE database (Oracle) and Datawarehouse, the ETL >process can be finished in DAC without error. However, the datawarehouse tables do not contain any records after the ETL.I hope you checked in Production, DEV should have records by that load.
Is there relationshiop between settings in DAC and Informatica Workflow Manager even though correct configuration is done in >DAC?DAC look for matching connection name not by user passed in both DAC and Informatica.
Hope you got answer, let me know for questions and update the post.
Thanks,
http://cool-bi.com
Edited by: Srini VEERAVALLI on May 9, 2013 7:08 AM -
Installing and Configuring OBIA with OBIEE, Informatica, DAC
Hi
Can anybody send me set up procedure for , how to install and configure OBIA with OBIEE, Informatica and DAC?
mail Id : [email protected]
Thnks In advance.Hi,
the setup procedure depends on your Oracle BI Apps version.
You can find all Oracle documentation to install and configure Oracle BI Apps from this URL :
http://www.oracle.com/technetwork/middleware/bi-foundation/documentation/bi-apps-098545.html
hope it helps,
Benoit -
New to Business Intelligence - Installation and Configuration
Reading all the documents associated with OBIEE, OBIA, DAC server, DAC client, and Informatica Powercenter has my head swimming (drowning). Can someone throw me a rope?
I'm going through an eBS implementation with 11g DB and 12.0.6 eBS (all on Linux) and I have been required to install and configure all the above. In a DEV environment, I have OBIEE running on a vm Windows 2003 server and need to install OBIA and IPC. According to the IPC doc's this requires 7 pc's/servers. Can someone provide a sample (functioning) environment?
Thanks.I have three servers for my setup and an EBS data source server:
DB/OBIEE Server: Oracle Linux 5
-Oracle DB 10G: holds OBAW & Informatica/DAC Repositories
-Has OBIEE 10.1.3.4.1 & OBI Apps 7.9.6
DAC/Informatica Server: Oracle Linux 4
-DAC Server
-Informatica 8.6.0 HF4
DAC/Informatics Client Server: Windows Server 2003
-DAC Client
-Informatica Client
Installation is quite long-winded but is well outlined in Chapter 3 & 4 of the installation guide:
http://download.oracle.com/docs/cd/E14223_01/bia.796/e14217/toc.htm -
How to create execution plan in DAC and how to start ETL steps
Hi,
For ETL configuration i have installed and configured,
1. Oracle 10G DB
2. obiee and obia 7.9.6
3. informatica server (here i created repository and integration services)
4. DAC server 10g (setup for DAC is also configured like create warehouse tables etc.,
same installation done on windows for client.
Now i'm struck with execution plan creation.
then
how to start ETL, where start ETL
Source : Oracle EBIZ R12.1.1
target : Datawarehouse (10G DB)
please help me out the steps till ETL start ?
Thanks,
SrikHi Srik
I am assuming you have followed the steps required before a load in the library for dac config, csv lookups etc...
Did you check out the example in the documentation?
Here is the link
http://download.oracle.com/docs/cd/E14223_01/bia.796/e14217/windows_ic.htm#BABFGIHE
If you follow those steps and run the execution plan and you can monitor the progress under the current run tab in the dac and the infa workflow monitor.
Regards
Nick
Edited by: Nickho on 2010/06/21 9:24 AM -
EIS Installation and Configuration
Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick ResponseI'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.
-
What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide
I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers. -
Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error
Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
Version: 1201000100
Revision: 0
OS Platform: Generic Platform
Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this). -
SEEBURGER EDI &AS/2 adapter installation and configuration guides
hi ,
can any one provide me SEEBURGER EDI &AS/2 adapter installation and configuration guides or links please?
thank you,
babuHi,
You can get the original manuals from Seeburger if you are installing the Seeburger on server.
Please see the below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Chilla -
Oracle 11g Server Installation and Configuration
Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank youHi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein -
Error while working on OC4J installation and Configuration
Hi i am using DB(9.2.0.6.0) and APPS(11.5.10.2). Now i have cloned a new instance and it runs on port 8050. Now i want to install and configure OC4J with it. I have done the OC4J Installation Successfully. Here i used the OC4J Version 9.0.3.I have changed the http-web-site.xml port number to 8890 and rmi.xml port to 23793 as per the document i got.To create the starting script, file name called “.start_oc4j” I issued cd $OC4J_TOP/j2ee/home/ then
java -jar oc4j.jar and
it throws the error
[applpdev@oraapps ~]$ cd $OC4J_TOP
[applpdev@oraapps home]$ pwd
/pdev/p01/oracle/pixappl/pwr/11.5.0/oc4j/
[applpdev@oraapps oc4j]$ cd j2ee/home/
[applpdev@oraapps home]$ java -jar oc4j.jar
Error starting JMS-Server: Unable to bind socket: Address already in use
Error starting ORMI-Server. Unable to bind socket: Address already in use
[applpdev@oraapps home]$Hi,
It looks like there is a conflicts with the ports you are using.
These ports seems to be already in use.
please check 8890 , 23793 , 8050 ports are in use or not .
Thanks,
Sharmela -
Exch 2013 Installation and configuration from a SBS point of view?
I was just wondering if anyone has stumbled upon any good "how-to" sites for those of us that (up to now) have been used to using SBS servers but now find ourselves needing to go the manual route with separate new servers (domain controller and
Exchange 2013 server)?
I'm trudging along with my first Server 2012 R2 and Exchange 2013 SP1 installation and configuration, but since I'm used to things configuring themselves in SBS, the piecemeal approach to 2013 is presenting challenges for me.
Considering the market for SBS is small business (and for me, typical 20 users), I'm looking for some direction and help in configuring these new servers to act like SBS 2011 replacement servers, with similar capabilites, etc...from the viewpoint of an SBS
administrator, per se.
Maybe nothing exists and we have to start from scratch, but I was hoping with as big as the SBS market was, there would be some useful info out there with the realization that we're coming from SBS.
Thanks.Hello,
It seems you have installed the Exchange Server and preparing to move mailboxes to the new host. You can check the application log to check whether the new installed Exchange works
fine.
If there are any error ID/reports, you can post them here for our referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Maybe you are looking for
-
Placing the transaction in SAP Menu
hi all, i have created a ztable and maintaining a transaction for that. T-code is zm93f. this transaction i have to place in the SAP Menu logistics -> Material Management->Purchasing->Purchase Order-->Messages Please let me know the procedure to fol
-
I just purchased a new SSD for my mac and I wanted to do a fresh/clean install on the SSD, like if my Macbook just came out of the box. How do I do that?
-
ERROR 2010 when installing Hitachi Travelstar 160 GB Hard Disk
I have just purchased a Hitachi Travelstar 5K160 160GB 2.5" Hard drive I have it installed in a Lenovo T43 Laptop and I get the following error from the BIOS ERROR 2010 The Hard drisk drive that you have installed has not been qualified for use in
-
Hello, Can anyone share HR 306 Time Management Doct plz.. my id is [email protected] Thanks Charlene
-
I downloaded the 30 day free trial of lightroom 3 and used it one day. The next day I got a error saying that lightroom is not responding. Any help out there?