Daq multiple tank connection : noob question

Guys
I want to connect 4 tank mimic to DAQ assistant with 4 current inputs.
But refer vi did i connect the tanks correctly to DAQ assistant? I dont know where to find the settings to assign say tank1 to current input1 and so on. I dont have the DAQ hardware to test my vi yet.
Thanks!
Message Edited by sunflower2772 on 08-19-2009 11:03 PM
Message Edited by sunflower2772 on 08-19-2009 11:05 PM
Solved!
Go to Solution.
Attachments:
all-instrumentasst 19 aug test bar.vi ‏217 KB

Split Signals on the Express/Signal Manipulation palette.

Similar Messages

  • Our home network has multiple devices connected by iCloud. Having problem with Calendar. On one iMac, all the events are duplicated. How can I correct that problem? Under the Calendar accounts, I had my Apple id listed and also just iCloud.

    Our home network has multiple devices connected by iCloud: 2 iMacs, 2 iPhone 4s, 1 MacPro Laptop, and 1 iPad 2.  When using Calendar, all the events were
    duplicated on my husbands iMac.  On his computer, under Calendar accounts, I had included iCloud and also my iCloud ID.  I thought that because I had two accounts listed that were connected to iCloud, that might be the cause of the duplication.  When I deleted ithe calendars from one of the accounts, it resulted
    in deleting all of the events on all of our network devices!
    I have since entered some new events into Calendar from my iMac and from my iPhone.  These appear correctly on all devices except my husband's iMac where they are again all duplicated.
    I have two questions: 1)  How can I eliminate the duplicated events on my husband's computer and 2) How do I retrieve the old wiped out Calendar events from
    Time Capsule.  I don't know how to find Calendar in the Time Capsule.  If I find the Calendar information in Time Capsule, how do I transfer it to my current Calendars?
    I was obtaining phone help from one of the Apple techs at Apple Support, but our call was disconnected part way through.  Didn't know how to reconnect with the tech.
    Thanks for any help.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Multiple db connections for one report

    Hi all,
    I am using Oracle Reports 10g R2. Could someone tell me if Oracle Reports supports multiple database connections for one rdf file, like this (using servlet)
    http://your_web_server:port_num/reports/rwservlet?server=server_name&report=myreport.rdf& userid1=username/password@my_db1&userid2=username/password@my_db2 &desformat=pdf&destype=cache
    I am asking this question because my report needs data from two separate Oracle databases.
    Edited by: user12239004 on Apr 27, 2010 2:14 AM

    No, you can only have one login.
    However, this is simple to resolve by creating a database link in one database to the other database.

  • ODI database connection - session question

    Hi,
    I have a package, where I have used a procedure.
    In my procedure, I open a database connection.
    My question is - In my next procedure - will I be able to use my same database connection which I created in previous step?
    Re-phrasing the question - for any number of database transaction happening in a package, will ODI opens multiple database connection per step or will there be only one single database connection?
    Thank you,
    Paras

    I believe its one per session so one connection inside the package. I think you should be , although i have not tried it practically.

  • 2 noob questions about speaker settin

    . What if I don't sync the Creative speaker settings with windows control panel speaker settings?
    2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
    Thanks.
    Message Edited by jermin on 06-24-2008 02:09 PM

    Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
    I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
    First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
    Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

  • Z68A-GD80-G3 - installing radeon 6990 graphics card - noob question

    all, apologies for the noob question, but: how exactly do i install a radeon 6990 graphics card?
    i have a Enermax ERV1250EGT power supply. the card is in the top blue pcie slot. i have connected the PCI-E 2.0 6+2 (8)Pin connectors (see http://www.enermax.co.uk/revolution85 - connectors tab, sorry no direct link but they are the red ones to be seen in the the bottom left corner of the picture: http://www.hardwareheaven.com/reviewimages/enermax_revolution_1250w/thumbs/10.jpg, i.e. 6 pin + 2 pin = 8 pin).
    the card will just not start, i.e. when i boot the pc nothing happens. it works fine without and works fine with my old graphics card (gtx 260).
    pics of the asus radeon 6990 here:
    http://www.techpowerup.com/reviews/ASUS/Radeon_HD_6990/images/power.jpg
    any ideas? is there anything different to this card than with other cards? have installed systems over the past 10 years and never had an issue until now.

    Quote from: shell20110309 on 22-November-11, 17:35:16
    :lol_anim:Featuring 4GB of high-speed GDDR5 memory, the AMD Radeon™ HD 6990 is the definitive solution for ultra-high resolution gaming across up to six simultaneous displays.1
    May I know the purpose of this post?

  • How to provide access to multiple users connected to a Dumb switch? (multi-auth/multi-domain)

    Good morning everybody,
    I am writing on behalf of not being able to implement a desired outcome in our company network. In fact the situation is as follows:
    What I want to do is to be able to authenticate users (802.1x authentication) in our company radius server and authorize them access by having a dynamic VLAN assignment in a multi-user environment on one and the same port of a Cisco 2960 switch. So far, the authentication and authorization has been working completely smoothly (there are no problems with itself). The concept involves the configuration of both DATA and VOICE VLANs as I there is also phone authentication implemented. In order to simulate this environment I introduce a Dumb switch connected to my Cisco 2960 Catalyst.
    What I have successfully managed to get to work so far is this:
    1) On one switch port I have tried the “authentication host-mode multi-domain” and it worked perfectly for a PC behind a telephone, or with one PC connected to a the dumb switch + the telephone connected to another port of the dumb switch. Logically it is the same situation as there is a separation in two domains – DATA and VOICE. Bellow is an output from show authentication sessions for this scenario.
    Interface  MAC Address     Method   Domain   Status         Session ID          
    Fa0/23     0021.9b62.b79b  dot1x    DATA     Authz Success  C0A8FF69000000F3008E (user1)
    Fa0/23     0015.655c.b912  dot1x    VOICE    Authz Success  C0A8FF69000000F9009F (phone)
    2) On the other hand, when I try the same scenario with the “authentication host-mode multi-auth”, the switch still separates the traffic in two domains and is able to authenticate all users, AS LONG AS they are in the same VLAN.
    show authentication sessions:
    Interface  MAC Address     Method   Domain   Status         Session ID          
    Fa0/23     0021.9b62.b79b  dot1x    DATA     Authz Success  C0A8FF69000000F3008E (user1)
    Fa0/23     b888.e3eb.ebac   dot1x    DATA     Authz Success  C0A8FF69000000F8008C (user2)
    Fa0/23     0015.655c.b912  dot1x    VOICE    Authz Success  C0A8FF69000000F9009F (phone)
    However, I cannot succeed authentication of many users from DIFFERENT VLANs, neither in multi-auth nor in multi-domain modes.
    What I want to get is an output like this:
    Interface  MAC Address     Method   Domain   Status         Session ID          
    Fa0/23     0021.9b62.b79b  dot1x    DATA     Authz Success  C0A8FF69000000F3008E (user1)
    Fa0/23     b888.e3eb.ebac dot1x    DATA     Authz Success  C0A8FF69000000F8008C (user2)
    Fa0/23     0015.655c.b912  dot1x    VOICE    Authz Success  C0A8FF69000000F9009F (phone)
    I want the switch to authenticate the users anytime they connect to itself and for them to have an instant access to the network. (I tell this because I tried scenario 1) with multi-domain mode and authentication violation replace, and it worked but, two users never had access to the “Internet” simultaneously!!!
    The configuration of the interface connected to the Dumb switch is as follows.
    interface FastEthernet0/x                                                      
     description Connection to DUMBswitch                                            
     switchport mode access                                                         
     switchport voice vlan XXX                                                      
     switchport port-security maximum 10                                            
     switchport port-security                                                       
     switchport port-security violation protect                                     
     authentication host-mode multi-auth                                            
     authentication priority dot1x                                                  
     authentication port-control auto                                               
     authentication timer reauthenticate 4000                                       
     authentication violation replace                                               
     dot1x pae authenticator                                                        
     dot1x timeout tx-period 10                                                     
     spanning-tree portfast                                                         
    The way I see it is explained in the following steps:
    - PC1 connects to the Dumb switch. This causes the Cisco switch to authenticate user1. This creates an auth. session with its MAC address linked to a domain DATA.
    - When PC2 connects to the Dumb switch, this causes the violation replace which replaces the recent authenticated MAC address with the MAC of PC2. I would like it once authenticated to appear in the authentication sessions with a link to a new DATA domain linked to the VLAN assigned from the RADIUS server.
    Is this possible? I think (in theory) this is the only way to provide authenticated access to multiple users connecting through Dumb switch to the network.
    Has anybody ever succeeded in such a configuration example and if yes, I would be love to get some help in doing so?
    Thank you
    Stoimen Hristov

    Hi Stoimen,
    I have done a setup similar to yours with the only exception being VLAN assignment. When I used dACLs only, it makes things somewhat easier as the VLAN no longer matters. Remember that the switchport is in access mode and will only allow a single VLAN across it (with the exception of the voice VLAN). I think that is the real cause of your problem.
    From what I can see, you have 2 options available to you:
    1) Use dACLs instead of VLAN assignment. This means that an access list will be downloaded from the radius server straight to the authenticated user's session. I have tested this and it works perfectly. Just Google Cisco IBNS quick reference guide and look for the section that deals with Low Impact mode.
    2) Get rid of the dumb switches and use managed switches throughout your network. Dumb switches will always be a point of weakness in your network because they have no intelligence to do advanced security features like port security, 802.1x, DHCP snooping, etc.
    Hopefully someone else will chime in with another option.
    Xavier

  • Multiple DataBase Connection in a Single Form

    hi all
    Is it Possible to have Multiple Database Connection With a Single Form
    Block a : Retriving data from a database Service a/Schema A.
    Block b : Retriving data from a Remote Database Service b / Schema B.
    If yes how to do this.
    regards
    jai
    email:[email protected]

    Sure you can access a database this way,
    but can you base a block on this database connect? No you can't.
    Frank

  • Syncing & Streaming from the same Library? - Noob question

    Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
    I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
    The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
    Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
    Thanks for taking the time to answer these silly questions.

    That's not quite what I was looking for.
    My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
    As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
    I guess I will just have to play to try it out.

  • Can a click box be used if multiple options to a questions?

    I was trying to have the student need to click on multiple options for a question.
    The situation called for the student to have to click on four different items that were correct out of a group of six items.  I put success captions on the four correct and failure messages on the 2 that were incorrect.
    Following are my settings for each of the click boxes:
    Action:       On success  - continue      Attempts:    infinite
    Options:  Success or Failure
    Pause for success/failure, Show hand over cursor, pause until user clicks
    The screen fades out before the user can read and select all their choices  (I have the timing for the screen set at 10 sec)
    I have an image button on the page labeled Continue that the user needs to click on before continuing.  It is set at:   Action: on success, continue, infinite attempts
    Is this the right standard object to use for this purpose, and if it is, what settings do I need to make it work?
    Thanks for the help

    You need to use Advanced Actions to achieve your desired result.
    The default behaviour of Captivate interactive objects is to Continue play as soon as you click them.  But there's a trick you can use to prevent this by having the On Success or On Failure action execute an Advanced Action instead that assigns the value of the variable rdcmndGotoFrame with the value of rdInfoCurrentFrame.

  • Problem about financial reporting studio(assign multiple db connection)

    Hi,
    I need to assign multiple database connections to a grid in Oracle Hyperion Financial Reporting Studio
    To do this, I performed the following steps:
    - Open a report.
    - In a grid, select one column for which I want to change the database connection.
    - In the Column Properties sheet, click the Select Database Connection button, .
    - In the Select a Database Connection dialog box, select a database connection from the Database Connection drop-down list, then Click OK.
    - In the Map Dimensions Between... dialog box, map dimensions between the default database connection and the selected database connection. I do this by selecting a dimension from the pull-down list in the right column for each dimension in the left column.
    - Optional: Select an alias table for the new database connection.
    - Click OK.
    But after last step I have received next error:
    *; nested exception is:*
    java.lang.NullPointerException
    Can someone explain the source of this error?
    And help me please solve this problem because I didn’t receive figures in that column where I changed database connection.
    Thank you in advance!

    I'm sure that both DB connections has the same dimension hierarchy. I can open the repot, but in it I don't see figures in that column where I've changed database connection...

  • Does Airport Express support multiple ethernet connections via a switch?

    If I use the following configuration, with the Airport Express extending my network, will it handle multiple devices connected via a switch?
    Modem---Airport Extreme- - -802.11n- - -Airport Express---Switch---multiple devices (eg. network printer and iMac).
    Or do I need to use a second Airport Extreme instead?

    It works for me—even when the AirPort Express device is configured to extend the wireless network created by the AirPort Extreme router.

  • Multiple IDLE connections

    Hi,
    I have two IDLE enabled IMAP accounts and I'm trying to work out if everything is working properly as it doesn't feel like it is.
    When I check netstat it shows multiple established connections for each account which seems to many for it to be right.
    Any thoughts on what to check? Server is showing two connections which would be right.
    Thanks,
    Adam

    If you must have a 1-1 app user/connection to database user/connection, then using a DatabaseSession would probably be the easiest solution. The means that each user would create and connect to their own DatabaseSession when they login to the app. You could still share the same TopLink project instance to reduce some of the connecting/initialization overhead, but there would be no way to pool connections. Using a DatabaseSession would not allow for any shared caching across users.
    Do you need to be connected as the user for reading, or just for writing to the database? If you can use a shared user/connection for reading, then you could use a ServerSession and have a shared cache. Define the shared user in the ServerSession, and when each user connects acquire a ClientSession through the acquireClientSession(DatabaseLogin) API, which allows you to specify the user/password to connect as for writing.
    In TopLink 10.1.3 you may also wish to investigate the VPD and exclusive client connection support. This allows for some of your data to be read through a user/VPD secure connection, and other shared data to still be cached. It also allows for the user/VPD to be switched on a pooled connection.

  • Multiple WLAN connections

    Does anyone know of a way to get my PODCAST and Email applications to use multiple WLAN connections?
    I spend most of my day in one of two places, each with a different WLAN, and I'd the phone to have the sense to change WLAN connection as they become available.
    Thanks for your time.

    Depends, on what your phone is.
    If you're using an N97 or a 5800, or anything running on s60v5 for that matter, Go to Menu>Settings>Connectivity>Wireless LAN>Options>Settings>Show WLAN availability. Then you can also set how often it will set to scan for WLAN connections. This would allow the phone to scan for WLAN hotspots around you immediately. Be warned however that this will drain your battery faster.
    On an s60v3 phone, I am not very familiar but from what I know its in Menu>Tools>Connectivity>Wireless LAN>Options>Settings>Show WLAn availability.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Multiple AWS connections

    Hi all,
    Can MCAK handle multiple AWS connections in current version?
    If not, if there is a plan let me know.
    My customer would like to use multiple AWS regions (e.g. US-East and Tokyo) because of BCP/DR.
    thanks,
    Jun Kojima         

    Yes, Multi-Cloud is designed to support multiple connections across the same or multiple platforms. You can even have multiple connections to the same AWS region using different accounts to facilitate chargeback allocation. You also have the option to specify and availability zone.
    PS. A new version of the Multi-Cloud kit will be available late February along with CIAC Enterprise Edition 3.1.1 offering full future upgradeability. For AWS, it will also support elastic IP and the management and distribution of keypairs.The current MCAK for Starter Edition is recommended for proof of concept only at this point.

Maybe you are looking for