Dashboard as Default when logged in
Hi,
I would like to set a dashboard as default for the users.
i have three dashboards:
dashboard1 , dashboard2 and dashboard3.
and three groups:
group1 , group2 , group3
at present: i would like to default dashboard2 as the homepage when users of all three groups logs in.
in future : i would like to default dashboard1 as default for group1 users ...dashboard2 as default for group2 ..........if you can give some idea on this also...i will implement when we need.
Thanks in Advance.
Hi ,
To set a dashboard as default for all the users....
I have used the following sql query in the INITIALISATION BLOCK of the session variable "PORTALPATH"
select '/shared/foldername/_portal/dashboardname' from dual;and it is working now.dashboard is default homepage for all the users....
Similar Messages
-
I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 297
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[failed] com.apple.ucupdate.plist
[failed] com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
[not loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] com.hp.help.tocgenerator.plist [Click for support]
[not loaded] com.logmein.LMILaunchAgentFixer.plist [Click for support]
[not loaded] com.logmein.logmeingui.plist [Click for support]
[not loaded] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.google.keystone.daemon.plist [Click for support]
[not loaded] com.logmein.logmeinblanker.plist [Click for support]
[not loaded] com.logmein.logmeinserver.plist [Click for support]
[not loaded] com.logmein.raupdate.plist [Click for support]
[not loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist [Click for support]
[not loaded] com.facebook.videochat.[redacted].plist [Click for support]
[not loaded] com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
HPEventHandler Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
LogMeInSafari64: Version: 1.0.660 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.660 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.660 [Click for support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 10.0.1 [Click for support]
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% ocspd
4% WindowServer
1% kextd
0% ps
0% securityd
Top Processes by Memory: ℹ️
137 MB Microsoft Word
120 MB Safari
86 MB ocspd
82 MB CalendarAgent
77 MB WindowServer
Virtual Memory Information: ℹ️
310 MB Free RAM
1.89 GB Active RAM
1.55 GB Inactive RAM
544 MB Wired RAM
1.13 GB Page-ins
8 KB Page-outs
Diagnostics Information: ℹ️
Apr 5, 2015, 09:32:47 AM Self test - passed
Apr 5, 2015, 09:30:05 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
Apr 4, 2015, 01:12:41 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
Apr 4, 2015, 08:13:57 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crashReinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
BI Publisher Report can only seen when logged in as Admin
Hi gurus,
We have OBIEE is set up on Windows 2003 server and configured to use Active Directory (AD) authentication. In one of the dashboards, we have a BI Publisher Report embedded. This was working fine until we configured the BI Server to use AD.
After the AD config, when logged in any user other than Administrator, the BI Publisher reprot throws up the error " Login Failed. Please contact Administrator for Username & Password".
All the required roles have been created on BI Server and granted to the requird users. I am at loss with this error.
Any help will be much appreciated.
Regards
MaheshDid you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.
-
LC_NUMERIC and LC_TIME bash warning when logging into TTY
I recently re-installed Arch after bouncing around a few distributions, and ever since I completed the install, I've had the following error when logging in to the TTY (only there, never noticed it anywhere else). Specifically, the error reads:
-bash: warning: setlocale: LC_NUMERIC: cannot change locale ()
-bash: warning: setlocale: LC_NUMERIC: cannot change locale ()
-bash: warning: setlocale: LC_TIME: cannot change locale ()
-bash: warning: setlocale: LC_TIME: cannot change locale ()
Output of locale:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
locale -a
C
en_US.utf8
POSIX
en_US.UTF-8 is also uncommented in locale.gen, and it's been generated. I haven't gotten any locale errors in any application I use, and it only appears before the prompt after logging in to a TTY screen. I've also not set those variables to anything else in /etc/profile, /etc/bash.bashrc, .profile/.bashrc. Logging into the root user instead of my user account does not result in the errors. Also, it seems from the error that the locales are being set to "", and I can't for the life of me figure out where it's coming from. I've searched the forums for similar problems, and most of these errors included warnings about files and folders not existing, which doesn't happen here, and were resolved by re-generating the locale (I've tried it, no change). The only one that came close was an old forum thread about guarddog generating a different set of locale's using incorrect locale definitions, which resulted in the same errors. If anyone has a suggestion as to how to fix this (or a handy trick for finding all files where locales are set), I'm open to them.
.bashrc:
# .bashrc (2013, Dec 11)
[ -z "$PS1" ] && return
# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
xterm-color) color_prompt=yes;;
esac
if [ -n "$force_color_prompt" ]; then
if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
# We have color support; assume it's compliant with Ecma-48
# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
# a case would tend to support setf rather than setaf.)
color_prompt=yes
else
color_prompt=
fi
fi
if [ "$color_prompt" = yes ]; then
PS1="\[\e[0;37m\]⮀\[\e[0;32m\]\u\[\e[0;36m\]@\[\e[0;32m\]\h\[\e[0;37m\]:\[\e[0;33m\] \W\[\e[0;37m\]\[\e[0;37m\]\$\[\e[0m\] "
else
PS1="\[\e[43m\]\[\e[31m\]\u\[\e[0;33m\]\[\e[46m\]⮀\[\e[34m\]\h\[\e[0;36m\]\[\e[47m\]⮀\[\e[33m\]\W\[\e[0;37m\]⮀\[\e[0m\] "
fi
unset color_prompt force_color_prompt
# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.
#if [ -f ~/.bash_aliases ]; then
# . ~/.bash_aliases
#fi
# enable color support of ls and also add handy aliases
if [ "$TERM" != "dumb" ] && [ -x /usr/bin/dircolors ]; then
eval "`dircolors -b`"
alias ls='ls --color=auto'
#alias dir='ls --color=auto --format=vertical'
#alias vdir='ls --color=auto --format=long'
#alias grep='grep --color=auto'
#alias fgrep='fgrep --color=auto'
#alias egrep='egrep --color=auto'
fi
##custom aliases
alias ls="ls -la --color=always --classify"
alias lh='\ls -a --classify | grep "\."'
alias halt="sudo shutdown -P now"
PATH=$PATH:$HOME/.rvm/bin:$HOME/.gem/ruby/2.0.0/bin # Add RVM to PATH for scripting
.profile:
# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.
# the default umask is set in /etc/profile
#umask 022
# if running bash
if [ -n "$BASH_VERSION" ]; then
# include .bashrc if it exists
if [ -f "$HOME/.bashrc" ]; then
. "$HOME/.bashrc"
fi
fi
# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi
PATH="$PATH:/usr/local/sbin"
PATH="$PATH:/usr/local/bin"An update:
I've tried explicitly exporting both variables with en_US.UTF-8 in my bashrc, which has resulted in no change whatsoever. Checking the value of these variables from my running system yields an empty return (i.e. the variables aren't set). Can someone let me know if these variables are set on their system? If they are, I'll see if I can set them manually and if that resolves the issue. -
Can't open AI VIs when logged in as a restricted user
I have a VI that does simultaneuos analog I/O (LabVIEW 6.1, Windows XP). This VI works fine when I am logged in as administrator, but when I try to run this VI from a restricted user account LabVIEW can't find the AI VIs (AI Config, Start, Clear and Read). All AO VIs can be found. I have changed the restricted user's permissions to the National Instruments folder to full control, as described in http://digital.ni.com/public.nsf/allkb/BB393E7B361E939886256EFD007AC591 but I still can't run my VI.
Does anybody know how to solve this problem?Thank you for your answer.
Unfortunately I can't try your solution on the computer where the problem occurred because it is used in another course for the moment and is therefore not available. But I tried to recreate the problem on another computer. I created a restricted account and when logged in on that account I opened my VI and it worked fine... (all subVI:s were found). By default, the restricted account had Read & Execute, List Folder Contents and Read permissions for the MAX folder. So, I then unchecked the Allow-boxes in an attempt to recreate the problem, but the VI still worked on the restricted account. Then I checked the Deny-boxes for the permissions mentioned above, but the VI still worked. Since I couldn't recreate the problem I don't know if your solution is the right one, but at least I can draw the conclusion that it is possible to run my VI from a restricted account.
But I will try your solution on the computer where the problem occurred when it is available and I will let you know whether the problem was solved or not. -
How do I disable "reopen windows when logging back in"
Everytime I shutdown the mac asks me "reopen windows when logging back in". In fact the default is to do reopen all open programs when I restart. he annoying thing with apple is that when you close a window like Safari and iPhoto the program itself is not closed unless you spend extra time to go and QUIT each program. So naturally at least Mail and Safari are up when I'm ready to shutdown. On a other days MS Word, Excel and iPhoto are open as well. This is annoying to have to remember to QUIT everything when I'm sleepy before shutting down. Mac is supposed to be convenient not tedious. Please stop asking me if I want to reopen on logging back in. And worse yest stop assuming that this is the default action. Someone please help!
You can uncheck the option box on the shut down screen. Or you can use a terminal command to disable it completely. Or you can get in the habit of using Command+Q (No Caps on the Q, Command+q) to shut down programs that you no longer need running. And if you get in that habit of using Command+q you don't need to close the window or windows that are open for that program. Command+q will close the program and the active window/s.
EDIT:
Here is a site that give you the command to disable this annoying ?FEATURE?.
http://osxdaily.com/2011/08/25/disable-reopen-windows-when-logging-back-in-in-ma c-os-x-lion-completely/
Message was edited by: Shootist007 -
What is : walletagent://Safari keeps coming up when 'logging in' any website
what is : walletagent://Safari ? it keeps coming up when 'logging in' any website. I then have to "page back" and enter passwords again etc. I know it has nothing to do with "Wallet" Software. So where does it come from? and how get rid of it?
Thanks,
<Email Edited By Host>From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults. -
Unable to create tickets from sattelite system when logged in with Arabic
Hi There,
We are unable to create suppurt message from the satellite system when logged in
with arabic language. A window is popping up with the message below.
<< Error in Local Message System: Select one of the
installed languages Message was Not Created >>
We are able to create support messages when logged in with English
language from the setellite system.
We have arabic language installed in the satellite system.
Thanks and Regards,
Azher.Hi Srikishan,
Thank you so much for the prompt reply and I have been able to resolve the issue with the hint you gave.
We dont have Arabic language installed on solution manager, but in the RFC destination <SM_<SID>CLNT<XXX>_BACK> the logon language was empty, I maintained that with the default language "EN" and it worked.
once again thanks a lot for the solution.
Regards,
Azher. -
Fn key can not work when logged in as a specific user
I use fn + (F1-F12) to control my MBP(adjust brightness etc). This setting works well for more than a year.
Recently, when I logged into my user account, I found I can not use fn+(F1-F12) to adjust setting anymore. When I press fn + f1, the result is equivalent to just press f1 without holding the fn key.
The fn key can work well when I am in the login screen, but after I type my password and press enter, the fn key will not function anymore. Even logout can not help.
If I log into another user (guest or newly created user), the fn key can work well. If I log into my account first, then another user, the fn key will be disabled until I reboot my machine.
It seems that my user account launched some weird applications that disabled my fn key.
I tried to disable as many login items as I can, but the problem still remains.Thank you for your answer.
Unfortunately I can't try your solution on the computer where the problem occurred because it is used in another course for the moment and is therefore not available. But I tried to recreate the problem on another computer. I created a restricted account and when logged in on that account I opened my VI and it worked fine... (all subVI:s were found). By default, the restricted account had Read & Execute, List Folder Contents and Read permissions for the MAX folder. So, I then unchecked the Allow-boxes in an attempt to recreate the problem, but the VI still worked on the restricted account. Then I checked the Deny-boxes for the permissions mentioned above, but the VI still worked. Since I couldn't recreate the problem I don't know if your solution is the right one, but at least I can draw the conclusion that it is possible to run my VI from a restricted account.
But I will try your solution on the computer where the problem occurred when it is available and I will let you know whether the problem was solved or not. -
Adobe defaulting "stay logged on" is a security issue
Why is it that when logging on to these forums, the checkbox for staying logged on is turned on by default? It doesn't even check a cookie or preference to determine the state of the checkbox - it just automatically is switched "on".
This is a security issue. It doesn't matter if the user is logging on from their own private computer, or from a public computer, this is a security issue that should be addressed.
^_^This is a security issue. It doesn't matter if the user is logging on from their own private computer, or from a public computer, this is a security issue that should be addressed.
^_^
You don't have to be worried about this. These forums will log you out after some time when your system is idle with no activity at all. Some times I have to login 3 times when I am on these forums. Security is their highest priority and up to now they can be commended for what they have done over the last two years. -
Suggestion for default arch logging behavior
Okay let me throw this out there and see what comes back...
Every Linux distribution I have used (apart from arch) has a boot log file enabled by default, or provides a simple Yes/No flag to turn the feature on.
Arch does not. Moreover, I have searched the forums and posted a question or two myself about the topic. No one seems to know the answer, and a lot of responses seem to indicate that, amongst the arch community, the possibility of a boot log file is treated like: a) something that no one in their right mind would want, or b) something that maybe, might be useful, but that no one can figure out how to implement.
What is this? What is going on? Arch has a bootlogd binary in /sbin/. Presumably there is no reason why it won't actually work, but no one seems to know where to put the call to the binary, or why they would put it there.
This seems like an easy-to-add feature that a developer or moderator (anyone who really knows the system layout well) could make the default for future installs. It just makes a text file that is a) not large, and b) can be very useful at times.
So how about it? Why not make this part of the default arch logging set up? (and of course explain what you did that worked.)tomk:
Sorry to disclose my ignorance, but I'm not sure how to do that.
What I have been doing though is trying to see in more detail how it is done on a debian system which I have access to. Here is what I've learned so far:
There are not that many references to bootlogd on the system, so it might be possible (for me) to track down what is going on:
root@wave32p:/etc# locate bootlogd
/etc/default/bootlogd
/etc/init.d/bootlogd
/etc/init.d/stop-bootlogd
/etc/init.d/stop-bootlogd-single
/sbin/bootlogd
/usr/share/man/man8/bootlogd.8.gz
1) "/etc/default/bootlogd" must be edited (trivially) such that a "No" becomes a "Yes" -- this seems like just a master switch.
2) the man files are exactly the same on the two systems, and the output of "/sbin/bootlogd -v" is the same on the two systems, however the size of the bootlogd binary itself is not the same on both systems (larger on debian64 system). not sure what to make of that, but it is not what I was hoping to see.
3) the script "/etc/init.d/bootlogd" runs with (eg.) a "start/stop" flag, the same as most "functions" under arch that have scripts associated with them.
4) it would seem that I have to grind my way through the above script if I'm going to make any progress. I'm doing that in my spare time at the moment, though it's a challenge since it's been a few years since I've written bash scripts on a regular basis. FYI, here is the /etc/init.d/bootlogd script verbatim (additional note: the option -r (below) is supported on the arch version of the bootlogd binary, but the -c option does not seem to be...interesting? Here is the man page entry for -c: "Attempt to write to the logfile even if it does not yet exist. Without this option, bootlogd will wait for the logfile to appear before attempting to write to it. This behavior prevents
bootlogd from creating logfiles under mount points."):
#! /bin/sh
### BEGIN INIT INFO
# Provides: bootlogd
# Required-Start: mountdevsubfs
# X-Start-Before: hostname keymap keyboard-setup procps pcmcia hwclock hwclockfirst hdparm hibernate-clean
# Required-Stop:
# Default-Start: S
# Default-Stop:
# Short-Description: Start or stop bootlogd.
# Description: Starts or stops the bootlogd log program
# which logs boot messages.
### END INIT INFO
PATH=/sbin:/bin # No remote fs at start
DAEMON=/sbin/bootlogd
[ -x "$DAEMON" ] || exit 0
NAME=bootlogd
DESC="boot logger"
BOOTLOGD_OPTS="-r -c"
[ -r /etc/default/bootlogd ] && . /etc/default/bootlogd
. /lib/init/vars.sh
. /lib/lsb/init-functions
# Because bootlogd is broken on some systems, we take the special measure
# of requiring it to be enabled by setting an environment variable.
case "$BOOTLOGD_ENABLE" in
[Nn]*)
exit 0
esac
# Previously this script was symlinked as "stop-bootlogd" which, when run
# with the "start" argument, should stop bootlogd. Now stop-bootlogd is
# a distinct script, but for backward compatibility this script continues
# to implement the old behavior.
SCRIPTNAME=${0##*/}
SCRIPTNAME=${SCRIPTNAME#[SK]??}
ACTION="$1"
case "$0" in
*stop-bootlog*)
[ "$ACTION" = start ] && ACTION=stop
esac
case "$ACTION" in
start)
# PATH is set above
log_daemon_msg "Starting $DESC" "$NAME"
if [ -d /proc/1/. ]
then
umask 027
start-stop-daemon --start --quiet --exec $DAEMON -- \
$BOOTLOGD_OPTS
ES=$?
else
$DAEMON $BOOTLOGD_OPTS
ES=$?
fi
log_end_msg $ES
stop)
PATH=/bin:/sbin:/usr/bin:/usr/sbin
log_daemon_msg "Stopping $DESC" "$NAME"
start-stop-daemon --oknodo --stop --quiet --exec $DAEMON
ES=$?
sleep 1
log_end_msg $ES
if [ -f /var/log/boot ] && [ -f /var/log/boot~ ]
then
[ "$VERBOSE" = no ] || log_action_begin_msg "Moving boot log file"
# bootlogd writes to boot, making backup at boot~
cd /var/log && {
chgrp adm boot || :
savelog -q -p -c 5 boot \
&& mv boot.0 boot \
&& mv boot~ boot.0
ES=$?
[ "$VERBOSE" = no ] || log_action_end_msg $ES
fi
restart|force-reload)
/etc/init.d/bootlogd stop
/etc/init.d/bootlogd start
status)
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2
exit 3
esac -
When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.
Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox -
i currently have a macbook 2.1xersion 10.6.8 and want to update. what can it support? Everything i try, it won't support! I can't even download IPhoto! I can't open anything in my ICloud account either! its not on my current browser nor am i able when logging onto my ICloud account. Can anyone give me some advice besides buying a newer laptop?
Lion 10.7.5 is as far as you can go. You must have at least 2 GBs of installed RAM.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. Or you can order directly on the online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
User settings to access network when logged on as service/batch
Hi.
We have been running Oracle Remote Agent (running external jobs on other host) on some linux-distros and have now started to do it on Windows as well.
But when we have setup everything properly, we get an 'Access denied' when trying to access the network from the Remote Host.
The way it works, in the database, you set up a credential with a user name and password. This information is then sent to the ETL (Remote Agent) which then starts the process as the user supplied in credentials.
So the service it self is running as Local Service and then starts a process as another user. Technically, how this is done on Windows I don't know...
Anyhow, the process starts fine and if we are not trying to access the network, it works fine.
But as soon as we are trying to access a network share using UNC path (\\192.168.1.10\share\directory), we get an 'Acces is denied'
The user we are using is an administrator. When doing a desktop login, this user can access the share without any problem.
Is there any other settings/policy/property the user must have to be able to access the network when logged on but not from the desktop?
Cheers
RichardHave you checked the security logs on 192.168.1.10?
You should see the entries showing what account is attempting to log on through a network connect. You may need to grant the User Right for "Allow Access from Network" and you may be having basic folder permission errors.
I'm curious if the process is using the machine account to hit the share or if it's the user account you're starting the process with.
Chris Ream -
My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?
when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Hi I add to change the e-mail settings for an account (server name changed) and mail is still flowing to and from the account. But all the mail in the IMAP folder is no longer showing in Thunderbird just mail that has come in and out since the change
-
Since IE is not available for Macs anymore how do I preview my newly designed website in that browser to make sure there are no 'issues'?
-
new to flash... i downloaded some "captioned flv playback skins" from adobe and installed them in cs4. 'SkinUnderPlayStopSeekMuteVol.swf' works in firefox on xp pro sp2 but does not work correctly in safari on a mac os-x. is there another web site wh
-
TS1424 How do i reset the security questions for iTunes ?
I have forgotten the answers to the security questions for ITunes .what to do?
-
I want to save email addresses I enter when using other websites
I am sending emails through a website and would like to have the email addresses saved so that when I want to send an email to an address I've used before, it will auto populate for me.