Dashed Table borders do not render correctly when PDF created from MS word 2013

I have a defined format for many documents which have all been created in MS word 2007. Never any problem creating PDFs of these using ADOBE XI Pro.
Updated to MS 2013 and now when converting the same doc to PDF all dashed borders around tables render as solid lines. The only time they render correctly is if I PRINT to PDF. Printing to PDF is not an option as I create batches of many documents at one time, so would be to time consuming. This was an issue when i considered upgrading 2007 to 2010 a couple of years ago, so caused me to delay upgrade.. upgrade is now required.
I have a sample of a document if required.
thanks

Just as a test, have you tried the MS plugin for PDF creation? I have found with other versions of WORD and Acrobat that PDF Maker and the MS plugin can both fill in dots and dashes on vector graphics (basically what the border is) and yet it comes out correctly with printing to the Adobe PDF printer. Unfortunately I do not have a solution. In my case, it seemed to be related to the vector graphic itself (I could import it to InkScape or other vector graphic tool and save to EMF and it then worked fine. It may be something that MS themselves have messed up in OFFICE 2013. Good luck.

Similar Messages

Lines in shaded table cells do not render properly in pdf created in Word 2010

When creating a pdf with shaded table cells using MS Word 2010; the black lines in the shaded table cells do not show up when looking at the page at a fit page view (anything under around 60%). They print, they are there when I zoom in, but will not show up if you zoom out.
I read a forum post in Adobe here which gave some really logical suggestions, but they didn't seem to work for everyone or the level of effort was not what i can put into it. I also tried some of those and variations of those; but they didn't seem to work.
http://forums.adobe.com/thread/305508
Did anyone come up with a solution? Some people were saying it's a bug in pdf software, if that is the case, has anyone heard of a resolution?
I'm using Windows 7 and word 2010 btw, to create the pdf.
Thanks!!

Just as a test, have you tried the MS plugin for PDF creation? I have found with other versions of WORD and Acrobat that PDF Maker and the MS plugin can both fill in dots and dashes on vector graphics (basically what the border is) and yet it comes out correctly with printing to the Adobe PDF printer. Unfortunately I do not have a solution. In my case, it seemed to be related to the vector graphic itself (I could import it to InkScape or other vector graphic tool and save to EMF and it then worked fine. It may be something that MS themselves have messed up in OFFICE 2013. Good luck.

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Table record is not updated correctly after navigate back from detail page

I have 2 jspx pages one (page A) has a table displaying the employee record, another one (page B) is used to update the selected employee record. On page A, when selecting a record and clicking the 'Details' button I can be navigaed to pag B on which I can modify the record information in a form component. I have one table column 'teamName' which is binding to a LOV at VO layer and on pageB I am using <af:inputComboboxListOfValues> to show a editable LOV list for this attribute, when I input a new value here and save it, I can go back to page A but the team name for this record shows empty, by querying the database I do find the record updated successfully with the changed value. And when I reloaded the page the record can show the new team name value. Why it is not updated in the employee table when immediately navigating back from page B? I have set the table iterator refresh attribut to "always" but still failed. Can anyone help on this issue? Thanks!!
BTW, for other columns (not LOV) they are ok, the table can show the changed value correctly.
Edited by: user774592 on Jul 14, 2011 7:56 PM
Edited by: user774592 on Jul 14, 2011 9:59 PM

Thanks for reply!
I did exactly the same as what you said. I d&d the data control Commit operation on page B to generate a 'Save' commandToolbarButton with the action attribute set to 'save' which is the from outcome for navigating back to page A. Is there any business logic I need to write here? Currently I have no.
Note: In this case I used an editable LOV, I have a requirment that besides selecting a existing value from the lov, user can also input a new value in the LOV. When going back to page A, I do find the LOV list is updated to contain the new vaule. Just the record in the table shows an empty value instead of the new value. Still do not know why.

First Play at Preview ok, but not working correctly when Video started from DVD

Hello
I created a Project with Encore CS5.1. When i test via the "preview" button (disc symbol) everything works fine.
When i export the Project to a DVD the Video starts directly with the Main Menue although i expect starting with the intro clip. As i said with encore preview everything works fine.
Has anybody an idea how to solve this issue?
Thanks in advance
Rene

Hi Bill and John
Thank you for your feedback.
Attached i'll send you a screen shot of the flow chart and the specs.
I just created a new project with only the "Vorspann - Trailer" and the Main Menue. All other links are not created yet.
With the preview everything is ok but if i create an image the video starts directly with the Main Menue.
Kind regards and thanks again.
Rene
With preview ok
Crate an image or DVD > video starts with direct play of the main menue

Internal Links in HTML Document Not Working Correctly in PDF

I have an HTML document that contains internal links (basically a Table of Contents). When the document is displayed in a browser, the internal links work correctly. However, when I use Acrobat 8 Professional to create a PDF version from the HTML source, the links don't go to the correct place when clicked. It almost appears that they are off by one, e.g., link 7 goes to anchor 8. I can send the source document for you to look at if you email me at eharris -at- synnovation.com. I am not expert in HTML and perhaps the links/anchors are not done correctly when I create the HTML document. Does anyone have any ideas on this?

This one has the same problem. For instance, "Anchor1" as <a name="Anchor1"> appears 13 times. I am sure that your problem is that Acrobat is going to the last occurance that is just before the first one. As I scan through the file I find similar results for all of the anchors. When I used Tidy, it reduces about 1350 errors to about 474, but that is still not too good. The validator is flagging a lot of identical IDs as well as unrecognized attributes (like ONSELECTSTART). The attributes correctly accepted by body are
Attribute Specifications
* BACKGROUND=URI (background image for document)
* BGCOLOR=Color (background color for document)
* TEXT=Color (text color for document)
* LINK=Color (link color for document)
* VLINK=Color (visited link color for document)
* ALINK=Color (active link color for document)
* ONLOAD=Script (document has been loaded)
* ONUNLOAD=Script (document has been exited)
as listed on htmlhelp.com for HTML 4. There may be some new ones in HTML 5, but I did not check.
I am not looking at all of your HTML in detail, but there appears to be a lot of unneeded things based on the error messages from the validator. Many browsers will let you display the stuff (even Acrobat), but there may be errors that crop in when you do not expect it or on some other browsers that the one you check. Thus again, you should use a validator. If you are only off a few tags that might be fine, but when it is in the 1000s, there is an issue. It would also be good to break your page up into parts. It is good practice on web pages for each page to be not much more than one screen. That is often exceeded, but 59 screens of info (on my screen) is a bit much. The TOC is definitely needed in that case, but just was well go to a sub page just as well and make the info easier to track. A PDF (as you are trying to get) could be made of the entire system for those that want it all in one bit. Bill

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

When converting tables in a MS Word 2010 or 2007 to PDF the table borders do not retain the correct thickness as identified in the word document. Is there a solution for this issue?

Please try with latest version of MS Word and Acrobat.
Regards,
Anoop

Animated Gif Image does not render correctly on screen

I have added animated gif image to the scene it does not render correctely.it shakes on the screen. plz give me any suggestion
i use following code
Image logo= new Image(getClass().getResourceAsStream("images/image.gif"));
logoLabel.setGraphic(new ImageView(logo));

Hello user,
I think gif are rendered smoothly.
Are you sure you are not making many object of same images everytime?
Thanks.
Narayan

Bc4j not behaving correctly when details are repeatedly added/removed

Hi,
     I'm having problems creating a form with a master detail relationship. Seems like bc4j is not behaving correctly when details with the same keys are repeatedly added and removed.
     I've 3 entities maintenance order, maintenance and maintenance type with the relationships maintenance order 1:n maintenance n:1 maintenance type. My application module data model has one view for each of these entities and a view link between maintenance order and maintenance.
     In the maintenance order form, I can choose which maintenance types apply to a maintenance order by marking checkboxes. The struts action that saves the maintenance order, I remove/add maintenance records base on the selected/unselected checkboxes.
Sequence of events:
1) Open maintenance order - Maintenance order shown with all maintenances selected
2) Uncheck all maintenances and save order - all maintenances removed from db
3) Open maintenance order - Maintenance order shown with no maintenances selected as expected
4) Check all maintenances and save order - all maintenances saved to db
5) Open maintenance order - Maintenance order shown with all maintenances selected as expected
6) Uncheck all maintenances and save order - NO maintenances removed from db
7) Open maintenance order - Maintenance order shown with NO maintenances selected, even thought there are maintenances in the db
8) Check all maintenances and save order - bc4j tried to insert new maintenance records in the db and an exception was raised due to unique constraint violation
My environment is: Sun JDK 1.4.1_01, JDeveloper 9.0.3.4 (build 1247), testing with the embedded server
Server log produced with jbo.debugoutput=console:
[17] BC4J Property jbo.default.language='pt' -->(MetaObjectManager) from System Default
[18] BC4J Property jbo.default.country='BR' -->(MetaObjectManager) from System Default
[19] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
[20] Skipping empty Property ConnectionMode from System Default
[21] Skipping empty Property HostName from System Default
[22] Skipping empty Property ConnectionPort from System Default
[23] BC4J Property jbo.locking.mode='pessimistic' -->(MetaObjectManager) from System Default
[24] Skipping empty Property ApplicationPath from System Default
[25] BC4J Property AppModuleJndiName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule' -->(SessionImpl) from Client Environment
[26] Skipping empty Property java.naming.security.principal from System Default
[27] Skipping empty Property java.naming.security.credentials from System Default
[28] Skipping empty Property jbo.user.principal from System Default
[29] Skipping empty Property jbo.object.marshaller from System Default
[30] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
[31] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
[32] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
[33] Skipping empty Property jbo.pcoll.mgr from System Default
[34] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
[35] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
[36] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
[37] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
[38] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
[39] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
[40] Skipping empty Property JBODynamicObjectsPackage from System Default
[41] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
[42] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
[43] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
[44] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
[45] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[46] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
[47] Skipping empty Property HandleName from System Default
[48] Skipping empty Property Factory-Substitution-List from System Default
[49] BC4J Property jbo.project='Sinalizacao' -->(Configuration) from Client Environment
[50] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
[51] BC4J Property jbo.dofailover='true' -->(Configuration) from System Default
[52] BC4J Property jbo.doconnectionpooling='false' -->(Configuration) from System Default
[53] BC4J Property jbo.recyclethreshold='10' -->(Configuration) from System Default
[54] BC4J Property jbo.ampool.dynamicjdbccredentials='true' -->(Configuration) from System Default
[55] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
[56] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.http.HttpSessionCookieFactory' -->(Configuration) from Client Environment
[57] BC4J Property jbo.ampool.connectionstrategyclass='oracle.jbo.common.ampool.DefaultConnectionStrategy' -->(Configuration) from System Default
[58] BC4J Property jbo.ampool.maxpoolsize='2147483647' -->(Configuration) from System Default
[59] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from System Default
[60] BC4J Property jbo.ampool.monitorsleepinterval='600000' -->(Configuration) from System Default
[61] BC4J Property jbo.ampool.minavailablesize='5' -->(Configuration) from System Default
[62] BC4J Property jbo.ampool.maxavailablesize='25' -->(Configuration) from System Default
[63] BC4J Property jbo.ampool.maxinactiveage='600000' -->(Configuration) from System Default
[64] BC4J Property jbo.ampool.doampooling='true' -->(Configuration) from System Default
[65] BC4J Property jbo.passivationstore='null' -->(MetaObjectManager) from System Default
[66] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
[67] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
[68] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
[69] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
[70] BC4J Property jbo.maxpoolcookieage='-1' -->(Configuration) from System Default
[71] BC4J Property PoolClassName='oracle.jbo.common.ampool.ApplicationPoolImpl' -->(Configuration) from System Default
[72] BC4J Property jbo.maxpoolsize='2147483647' -->(Configuration) from System Default
[73] BC4J Property jbo.initpoolsize='0' -->(Configuration) from System Default
[74] BC4J Property jbo.poolrequesttimeout='30000' -->(Configuration) from System Default
[75] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(Configuration) from System Default
[76] BC4J Property jbo.poolminavailablesize='5' -->(Configuration) from System Default
[77] BC4J Property jbo.poolmaxavailablesize='25' -->(Configuration) from System Default
[78] BC4J Property jbo.poolmaxinactiveage='600000' -->(Configuration) from System Default
[79] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
[80] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
[81] BC4J Property jbo.viewlink.consistent='false' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[82] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
[83] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
[84] BC4J Property jbo.SQLBuilder='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[85] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
[86] BC4J Property jbo.TypeMapEntries='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[87] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
[88] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
[89] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
[90] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
[91] BC4J Property oracle.jbo.defineColumnLength='as_chars' -->(MetaObjectManager) from System Default
[92] Skipping empty Property jbo.tmpdir from System Default
[93] Skipping empty Property jbo.server.internal_connection from System Default
[94] Skipping empty Property SessionClass from System Default
[95] Skipping empty Property TransactionFactory from System Default
[96] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
[97] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[98] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[99] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[100] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[101] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[102] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[103] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
[104] Skipping empty Property oracle.home from System Default
[105] Skipping empty Property oc4j.name from System Default
[106] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
[107] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
[108] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
[109] Skipping empty Property oracle.jbo.schema from System Default
[110] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
[111] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
[112] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
[113] Skipping empty Property ord.HttpTempDir from System Default
[114] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
[115] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
[116] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
[117] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
[118] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
[119] Skipping empty Property ord.rp.codebase from System Default
[120] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
[121] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
[122] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
[123] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
[124] BC4J Property jbo.security.loginmodule='oracle.security.jazn.tools.Admintool' -->(SessionImpl) from System Default
[125] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
[126] Copying unknown Client property (DBconnection='jdbc:oracle:thin:@cdsvandromeda:1521:dctm') to session
[127] Copying unknown Client property (password='kitbordo') to session
[128] Copying unknown Client property (JDBCName='Kitbordo') to session
[129] Copying unknown Client property (jbo.jndi.use_default_context='true') to session
[130] Copying unknown Client property (user='kitbordo') to session
[131] Copying unknown Client property (jbo.applicationmoduleclassname='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
[132] Copying unknown Client property (ApplicationName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
[133] WARNING: Unused property: LC='Calling Function' found in /oracle/jbo/common/Diagnostic.properties resource
[134] }} finished loading BC4J properties
[135] -----------------------------------------------------------
Diagnostics: (Properties (re)loaded) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
[136] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
[137] JavaVMVersion: 1.4.1_01-b01
[138] JavaVMVendor: Sun Microsystems Inc.
[139] JavaVMName: Java HotSpot(TM) Client VM
[140] OperatingSystemName: Windows 2000
[141] OperatingSystemVersion: 5.0
[142] OperatingSystemUsername: Lbueno
[143] Jbo323Compatible Flag: false, str: false
[144] Loading from Sinalizacao.jpx file
[145] Loading from indvidual XML files
[146] Loading the Containees for the Package 'Sinalizacao.Sinalizacao'.
[147] Connected to Oracle JBO Server - Version: 9.0.3.11.88
[148] BC4J: Instrumentation disabled
[149] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/service.xml file
[150] Loading from indvidual XML files
[151] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.service'.
[152] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/CadastroDeManutencaoModule.xml file
[153] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/view.xml file
[154] Loading from indvidual XML files
[155] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.view'.
[156] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/TipoManutencaoBoiaView.xml file
[157] ViewObjectImpl's default fetch mode = 0
[158] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/entity.xml file
[159] Loading from indvidual XML files
[160] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.entity.entity'.
[161] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaEntity.xml file
[162] Loading Typemap entries from oracle.jbo.common.OracleTypeMapEntries
[163] Stringmanager using default locale: 'pt_BR'
[164] CSMessageBundle (language base) being initialized
[165] OracleSQLBuilder reached getInterface
[166] Oracle SQL Builder Version 3.2.0.0.0
[167] ViewRowSetImpl's jbo.viewlink.consistent = false (0)
[168] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/BoiasPorCanalView.xml file
[169] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/BoiaEntity.xml file
[170] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoBoiaView.xml file
[171] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoManutencaoBoiaEntity.xml file
[172] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaView.xml file
[173] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaEntity.xml file
[174] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaViewLink.xml file
[175] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaAssociation.xml file
[176] Using DatabaseTransactionFactory implementation oracle.jbo.server.DatabaseTransactionFactory
[177] mUsePersColl is false
[178] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
[179] ViewObjectImpl.mDefaultMaxActiveNodes is 30
[180] DBTransactionImpl Max Cursors is 50
[181] Created root application module: 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule'
[182] Locale is: 'pt_BR'
[183] DefaultConnectionStrategy is establishing an application module connection
[184] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[185] Creating a new pool resource
[186] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo}' ...
[187] Successfully logged in
[188] JDBCDriverVersion: 9.0.1.4.0
[189] DatabaseProductName: Oracle
[190] DatabaseProductVersion: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.1.0 - Production
[191] **PCollManager.resolveName** tabName=PS_TXN
[192] **retrieve** id=-1, collid=6838, keyonly=falseGetting a connection for internal use...
[193] Creating internal connection...
[194] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[195] Creating a new pool resource
[196] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo, dll=ocijdbc9, protocol=thin}' ...
[197] , parid=0, ret=oracle.jdbc.driver.OracleBlobInputStream
[198] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
[199] **retrieve** id=1, collid=6838, keyonly=false, parid=-1, ret=oracle.jdbc.driver.OracleBlobInputStream
[200] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
[201] Clearing VO cache for TipoManutencaoBoiaView
[202] Clear QueryCollection in cache...
[203] Clearing VO cache for BoiasPorCanalView
[204] Clear QueryCollection in cache...
[205] Clearing VO cache for HistoricoManutencaoBoiaView
[206] Clear QueryCollection in cache...
[207] Getting a connection for internal use...
[208] Creating internal connection...
[209] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[210] Clearing VO cache for BoiasPorCanalView
[211] Clear QueryCollection in cache...
07/09/2004 12:07:51 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.actions.LocalStrings', returnNull=true
[212] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoViewLink.xml file
[213] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoDeManutencaoDeBoiaAssociation.xml file
[214] Column count: 23
[215] ViewObject : Created new QUERY statement
[216] SELECT Boia.H55SCANA, Boia.H55CODBO, Boia.H55LATGR, Boia.H55LATMI, Boia.H55LATSE, Boia.H55INDLA, Boia.H55VALEX, Boia.H55LONGR, Boia.H55LONMI, Boia.H55LONSE, Boia.H55INDLO, Boia.H55VALEY, Boia.H55CORLP, Boia.H55REMOV, Boia.H55NRORD, Boia.H55PROJE, Boia.H55PINTU, Boia.H55CARAC, Boia.H55EQLUM, Boia.H55FOLUM, Boia.H55EQFUN, Boia.H55EQMON FROM H55BOIAT Boia WHERE Boia.H55SCANA = :1
[217] Binding param 1: 21
[218] Clearing VO cache for TipoManutencaoBoiaView
[219] Clear QueryCollection in cache...
[220] Column count: 2
[221] ViewObject : Created new QUERY statement
[222] SELECT TipoManutencaoBoiaEntity.H5PSTPMB, TipoManutencaoBoiaEntity.H5PNOMAN FROM H5PTPMBT TipoManutencaoBoiaEntity ORDER BY TipoManutencaoBoiaEntity.H5PNOMAN ASC
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.bean.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
[223] Application Module failover is enabled
[224] Getting a connection for internal use...
[225] Creating internal connection...
[226] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[227] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" im="1" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.logic.LocalStrings', returnNull=true
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[228] **insert** id=1, parid=-1, collid=6844, keyArr.len=-1, cont.len=1043
[229] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[230] **commit** #pending ops=1
[231] **insert** id=-1, parid=0, collid=6844, keyArr.len=-1, cont.len=665
[232] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[233] **commit** #pending ops=1
[234] Getting a connection for internal use...
[235] Creating internal connection...
[236] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[237] **deleteAll** collid=6838
[238] stmt: delete "PS_TXN" where collid=:1
[239] **commit** #pending ops=1
[240] Reusing a cached session application module instance
[241] Getting a connection for internal use...
[242] Creating internal connection...
[243] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[244] Column count: 5
[245] ViewObject : Created new QUERY statement
[246] SELECT HistoricoManutencaoBoia.H56CODBO, HistoricoManutencaoBoia.H56DTMAN, HistoricoManutencaoBoia.H56DESCR, HistoricoManutencaoBoia.H56SCANA FROM H56HIMAT HistoricoManutencaoBoia WHERE HistoricoManutencaoBoia.H56CODBO = ? and HistoricoManutencaoBoia.H56SCANA = ?
[247] Binding param 1: XPPP
[248] Binding param 2: 21
[249] Clearing VO cache for HistoricoManutencaoBoiaView
[250] Clear QueryCollection in cache...
[251] Column count: 5
[252] ViewObject : Reusing defined prepared Statement
[253] Binding param 1: XPPP
[254] Binding param 2: 21
[255] Application Module failover is enabled
[256] Getting a connection for internal use...
[257] Creating internal connection...
[258] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[259] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[260] **insert** id=1, parid=-1, collid=6847, keyArr.len=-1, cont.len=1036
[261] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[262] **commit** #pending ops=1
[263] **insert** id=-1, parid=0, collid=6847, keyArr.len=-1, cont.len=665
[264] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[265] **commit** #pending ops=1
[266] Getting a connection for internal use...
[267] Creating internal connection...
[268] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[269] **deleteAll** collid=6844
[270] stmt: delete "PS_TXN" where collid=:1
[271] **commit** #pending ops=1
[272] Reusing a cached session application module instance
[273] Getting a connection for internal use...
[274] Creating internal connection...
[275] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[276] Column count: 6
[277] ViewObject close prepared statements...
[278] ViewObject : Created new QUERY statement
[279] SELECT ManutencaoBoiaEntity.H6ASCANA, ManutencaoBoiaEntity.H6ACODBO, ManutencaoBoiaEntity.H6ADTMAN, ManutencaoBoiaEntity.H6ASTPMB, TipoManutencaoBoiaEntity.H5PSTPMB AS CODIGO_TIPO_MANUTENCAO_BOIA1, TipoManutencaoBoiaEntity.H5PNOMAN FROM H6AMABOT ManutencaoBoiaEntity, H5PTPMBT TipoManutencaoBoiaEntity WHERE (ManutencaoBoiaEntity.H6ASCANA = :1 AND ManutencaoBoiaEntity.H6ACODBO = :2 AND ManutencaoBoiaEntity.H6ADTMAN = :3)
[280] Binding param 1: 21
[281] Binding param 2: XPPP
[282] Binding param 3: 2004-06-02
07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
[283] Application Module failover is enabled
[284] Getting a connection for internal use...
[285] Creating internal connection...
[286] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[287] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDAT07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
07/09/2004 12:08:20 org.apache.struts.util.PropertyMessageResources <init>
INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
A[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[288] **insert** id=1, parid=-1, collid=6849, keyArr.len=-1, cont.len=1036
[289] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[290] **commit** #pending ops=1
[291] **insert** id=-1, parid=0, collid=6849, keyArr.len=-1, cont.len=665
[292] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[293] **commit** #pending ops=1
[294] Getting a connection for internal use...
[295] Creating internal connection...
[296] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[297] **deleteAll** collid=6847
[298] stmt: delete "PS_TXN" where collid=:1
[299] **commit** #pending ops=1
[300] Reusing a cached session application module instance
[301] Getting a connection for internal use...
[302] Creating internal connection...
[303] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[304] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[305] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[306] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[307] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatoriosSetorSinalizacaoNauticaBoiaAssociation.xml file
[308] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatorioSetorSinalizacaoNauticaEntity.xml file
[309] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[310] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[311] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[312] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaAssociation.xml file
[313] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[314] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
[315] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
[316] QueryCollection: afterRemove(0)
[317] ViewRowCache: removeReference
[318] ViewRowCache: removeReference
[319] QueryCollection: afterRemove(5)
[320] ViewRowCache: removeReference
[321] ViewRowCache: removeReference
[322] QueryCollection: afterRemove(10)
[323] ViewRowCache: removeReference
[324] ViewRowCache: removeReference
[325] QueryCollection: afterRemove(15)
[326] ViewRowCache: removeReference
[327] ViewRowCache: removeReference
[328] QueryCollection: afterRemove(20)
[329] ViewRowCache: removeReference
[330] ViewRowCache: removeReference
[331] QueryCollection: afterRemove(25)
[332] ViewRowCache: removeReference
[333] ViewRowCache: removeReference
[334] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[335] Reusing prepared LOCK statement
[336] QueryCollection: afterRemove(0)
[337] ViewRowCache: removeReference
[338] ViewRowCache: removeReference
[339] QueryCollection: afterRemove(4)
[340] ViewRowCache: removeReference
[341] ViewRowCache: removeReference
[342] QueryCollection: afterRemove(8)
[343] ViewRowCache: removeReference
[344] ViewRowCache: removeReference
[345] QueryCollection: afterRemove(12)
[346] ViewRowCache: removeReference
[347] ViewRowCache: removeReference
[348] QueryCollection: afterRemove(16)
[349] ViewRowCache: removeReference
[350] ViewRowCache: removeReference
[351] QueryCollection: afterRemove(20)
[352] ViewRowCache: removeReference
[353] ViewRowCache: removeReference
[354] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[355] Reusing prepared LOCK statement
[356] QueryCollection: afterRemove(0)
[357] ViewRowCache: removeReference
[358] ViewRowCache: removeReference
[359] QueryCollection: afterRemove(3)
[360] ViewRowCache: removeReference
[361] ViewRowCache: removeReference
[362] QueryCollection: afterRemove(6)
[363] ViewRowCache: removeReference
[364] ViewRowCache: removeReference
[365] QueryCollection: afterRemove(9)
[366] ViewRowCache: removeReference
[367] ViewRowCache: removeReference
[368] QueryCollection: afterRemove(12)
[369] ViewRowCache: removeReference
[370] ViewRowCache: removeReference
[371] QueryCollection: afterRemove(15)
[372] ViewRowCache: removeReference
[373] ViewRowCache: removeReference
[374] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[375] Reusing prepared LOCK statement
[376] QueryCollection: afterRemove(0)
[377] ViewRowCache: removeReference
[378] ViewRowCache: removeReference
[379] QueryCollection: afterRemove(2)
[380] ViewRowCache: removeReference
[381] ViewRowCache: removeReference
[382] QueryCollection: afterRemove(4)
[383] ViewRowCache: removeReference
[384] ViewRowCache: removeReference
[385] QueryCollection: afterRemove(6)
[386] ViewRowCache: removeReference
[387] ViewRowCache: removeReference
[388] QueryCollection: afterRemove(8)
[389] ViewRowCache: removeReference
[390] ViewRowCache: removeReference
[391] QueryCollection: afterRemove(10)
[392] ViewRowCache: removeReference
[393] ViewRowCache: removeReference
[394] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[395] Reusing prepared LOCK statement
[396] QueryCollection: afterRemove(0)
[397] ViewRowCache: removeReference
[398] ViewRowCache: removeReference
[399] QueryCollection: afterRemove(1)
[400] ViewRowCache: removeReference
[401] ViewRowCache: removeReference
[402] QueryCollection: afterRemove(2)
[403] ViewRowCache: removeReference
[404] ViewRowCache: removeReference
[405] QueryCollection: afterRemove(3)
[406] ViewRowCache: removeReference
[407] ViewRowCache: removeReference
[408] QueryCollection: afterRemove(4)
[409] ViewRowCache: removeReference
[410] ViewRowCache: removeReference
[411] QueryCollection: afterRemove(5)
[412] ViewRowCache: removeReference
[413] ViewRowCache: removeReference
[414] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[415] Reusing prepared LOCK statement
[416] QueryCollection: afterRemove(0)
[417] ViewRowCache: removeReference
[418] ViewRowCache: removeReference
[419] QueryCollection: afterRemove(0)
[420] ViewRowCache: removeReference
[421] ViewRowCache: removeReference
[422] QueryCollection: afterRemove(0)
[423] ViewRowCache: removeReference
[424] ViewRowCache: removeReference
[425] QueryCollection: afterRemove(0)
[426] ViewRowCache: removeReference
[427] ViewRowCache: removeReference
[428] QueryCollection: afterRemove(0)
[429] ViewRowCache: removeReference
[430] ViewRowCache: removeReference
[431] QueryCollection: afterRemove(0)
[432] ViewRowCache: removeReference
[433] ViewRowCache: removeReference
[434] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[435] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[436] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[437] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[438] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[439] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[440] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[441] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[442] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[443] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[444] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[445] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[446] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
[447] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
[448] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[449] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[450] TipoManutencaoBoiaView notify COMMIT ...
[451] BoiasPorCanalView notify COMMIT ...
[452] HistoricoManutencaoBoiaView notify COMMIT ...
[453] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[454] EntityCache close prepared statement
[455] EntityCache close prepared statement
[456] EntityCache close prepared statement
[457] Clearing VO cache for BoiasPorCanalView
[458] Clear QueryCollection in cache...
[459] Column count: 23
[460] ViewObject : Reusing defined prepared Statement
[461] Binding param 1: 21
[462] Clearing VO cache for TipoManutencaoBoiaView
[463] Clear QueryCollection in cache...
[464] Column count: 2
[465] ViewObject : Reusing defined prepared Statement
[466] Application Module failover is enabled
[467] Getting a connection for internal use...
[468] Creating internal connection...
[469] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[470] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[471] **insert** id=1, parid=-1, collid=6850, keyArr.len=-1, cont.len=1036
[472] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[473] **commit** #pending ops=1
[474] **insert** id=-1, parid=0, collid=6850, keyArr.len=-1, cont.len=665
[475] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[476] **commit** #pending ops=1
[477] Getting a connection for internal use...
[478] Creating internal connection...
[479] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[480] **deleteAll** collid=6849
[481] stmt: delete "PS_TXN" where collid=:1
[482] **commit** #pending ops=1
[483] Reusing a cached session application module instance
[484] Getting a connection for internal use...
[485] Creating internal connection...
[486] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[487] Application Module failover is enabled
[488] Getting a connection for internal use...
[489] Creating internal connection...
[490] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[491] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[492] **insert** id=1, parid=-1, collid=6851, keyArr.len=-1, cont.len=1036
[493] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[494] **commit** #pending ops=1
[495] **insert** id=-1, parid=0, collid=6851, keyArr.len=-1, cont.len=665
[496] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[497] **commit** #pending ops=1
[498] Getting a connection for internal use...
[499] Creating internal connection...
[500] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[501] **deleteAll** collid=6850
[502] stmt: delete "PS_TXN" where collid=:1
[503] **commit** #pending ops=1
[504] Reusing a cached session application module instance
[505] Getting a connection for internal use...
[506] Creating internal connection...
[507] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[508] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[509] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[510] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[511] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[512] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[513] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[514] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[515] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[516] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[517] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[518] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[519] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[520] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[521] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[522] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[523] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[524] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[525] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[526] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[527] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[528] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[529] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[530] TipoManutencaoBoiaView notify COMMIT ...
[531] BoiasPorCanalView notify COMMIT ...
[532] HistoricoManutencaoBoiaView notify COMMIT ...
[533] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[534] EntityCache close prepared statement
[535] EntityCache close prepared statement
[536] Clearing VO cache for BoiasPorCanalView
[537] Clear QueryCollection in cache...
[538] Column count: 23
[539] ViewObject : Reusing defined prepared Statement
[540] Binding param 1: 21
[541] Clearing VO cache for TipoManutencaoBoiaView
[542] Clear QueryCollection in cache...
[543] Column count: 2
[544] ViewObject : Reusing defined prepared Statement
[545] Application Module failover is enabled
[546] Getting a connection for internal use...
[547] Creating internal connection...
[548] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[549] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[550] **insert** id=1, parid=-1, collid=6853, keyArr.len=-1, cont.len=1036
[551] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[552] **commit** #pending ops=1
[553] **insert** id=-1, parid=0, collid=6853, keyArr.len=-1, cont.len=665
[554] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[555] **commit** #pending ops=1
[556] Getting a connection for internal use...
[557] Creating internal connection...
[558] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[559] **deleteAll** collid=6851
[560] stmt: delete "PS_TXN" where collid=:1
[561] **commit** #pending ops=1
[562] Reusing a cached session application module instance
[563] Getting a connection for internal use...
[564] Creating internal connection...
[565] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[566] Application Module failover is enabled
[567] Getting a connection for internal use...
[568] Creating internal connection...
[569] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[570] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[571] **insert** id=1, parid=-1, collid=6854, keyArr.len=-1, cont.len=1036
[572] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[573] **commit** #pending ops=1
[574] **insert** id=-1, parid=0, collid=6854, keyArr.len=-1, cont.len=665
[575] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[576] **commit** #pending ops=1
[577] Getting a connection for internal use...
[578] Creating internal connection...
[579] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[580] **deleteAll** collid=6853
[581] stmt: delete "PS_TXN" where collid=:1
[582] **commit** #pending ops=1
[583] Reusing a cached session application module instance
[584] Getting a connection for internal use...
[585] Creating internal connection...
[586] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[587] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[588] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[589] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[590] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[591] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[592] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[593] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[594] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
[595] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
[596] QueryCollection: afterRemove(0)
[597] ViewRowCache: removeReference
[598] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[599] Reusing prepared LOCK statement
[600] QueryCollection: afterRemove(0)
[601] ViewRowCache: removeReference
[602] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[603] Reusing prepared LOCK statement
[604] QueryCollection: afterRemove(0)
[605] ViewRowCache: removeReference
[606] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[607] Reusing prepared LOCK statement
[608] QueryCollection: afterRemove(0)
[609] ViewRowCache: removeReference
[610] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[611] Reusing prepared LOCK statement
[612] QueryCollection: afterRemove(0)
[613] ViewRowCache: removeReference
[614] OracleSQLBuilder Executing Select on: H6AMABOT (true)
[615] Reusing prepared LOCK statement
[616] QueryCollection: afterRemove(0)
[617] ViewRowCache: removeReference
[618] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[619] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[620] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[621] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[622] TipoManutencaoBoiaView notify COMMIT ...
[623] BoiasPorCanalView notify COMMIT ...
[624] HistoricoManutencaoBoiaView notify COMMIT ...
[625] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
[626] EntityCache close prepared statement
[627] EntityCache close prepared statement
[628] EntityCache close prepared statement
[629] Clearing VO cache for BoiasPorCanalView
[630] Clear QueryCollection in cache...
[631] Column count: 23
[632] ViewObject : Reusing defined prepared Statement
[633] Binding param 1: 21
[634] Clearing VO cache for TipoManutencaoBoiaView
[635] Clear QueryCollection in cache...
[636] Column count: 2
[637] ViewObject : Reusing defined prepared Statement
[638] Application Module failover is enabled
[639] Getting a connection for internal use...
[640] Creating internal connection...
[641] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[642] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[643] **insert** id=1, parid=-1, collid=6855, keyArr.len=-1, cont.len=1036
[644] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[645] **commit** #pending ops=1
[646] **insert** id=-1, parid=0, collid=6855, keyArr.len=-1, cont.len=665
[647] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[648] **commit** #pending ops=1
[649] Getting a connection for internal use...
[650] Creating internal connection...
[651] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[652] **deleteAll** collid=6854
[653] stmt: delete "PS_TXN" where collid=:1
[654] **commit** #pending ops=1
[655] Reusing a cached session application module instance
[656] Getting a connection for internal use...
[657] Creating internal connection...
[658] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[659] Application Module failover is enabled
[660] Getting a connection for internal use...
[661] Creating internal connection...
[662] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[663] <AM MomVer="0">
<cd/>
<TXN Def="0" New="0" Lok="1"/>
<VO>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
<VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
<args ct="1">
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
<VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
<args ct="2">
<arg>
<![CDATA[XPPP ]]>
</arg>
<arg>
<![CDATA[21]]>
</arg>
</args>
</VO>
</VO>
</AM>
[664] **insert** id=1, parid=-1, collid=6856, keyArr.len=-1, cont.len=1036
[665] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[666] **commit** #pending ops=1
[667] **insert** id=-1, parid=0, collid=6856, keyArr.len=-1, cont.len=665
[668] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
[669] **commit** #pending ops=1
[670] Getting a connection for internal use...
[671] Creating internal connection...
[672] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[673] **deleteAll** collid=6855
[674] stmt: delete "PS_TXN" where collid=:1
[675] **commit** #pending ops=1
[676] Reusing a cached session application module instance
[677] Getting a connection for internal use...
[678] Creating internal connection...
[679] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[680] OracleSQLBuilder Executing Select on: H56HIMAT (true)
[681] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
[682] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
[683] OracleSQLBuilder Executing Select on: H55BOIAT (true)
[684] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
[685] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
[686] EntityCache:add WARNING - a new row with a key equal to a removed row
[687] EntityCache:add WARNING - a new row with a key equal to a removed row
[688] EntityCache:add WARNING - a new row with a key equal to a removed row
[689] EntityCache:add WARNING - a new row with a key equal to a removed row
[690] EntityCache:add WARNING - a new row with a key equal to a removed row
[691] EntityCache:add WARNING - a new row with a key equal to a removed row
[692] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
[693] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
[694] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
[695] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
[696] OracleSQLBuilderImpl.doEntityDML failed...
[697] X/Open SQL State is: 23000
[698] java.sql.SQLException: ORA-00001: restriÃ§Ã£o exclusiva (KITBORDO.PK_H6AMABOT) violada
ORA-06512: em line 1
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:187)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1477)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2004)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1924)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2562)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:452)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:526)
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:370)

Hi Sung, Thanks for your reply.
Leonardo:
If I understand your msg correctly, I'm wondering if
the data model as you described is complete.
You state that you have MaintenanceType, Maintenance,
and MaintenanceOrder, but don't you need
MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
>
Otherwise, you say that you removed all Maintenance's
in step 2). How did you form a list of all
Maintenance's in step 4)? How do you form this
list?
was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
//All codes of maintenance types, that already have a
//respective maintenance record in the db, have already
//been remove from the maintenancesToInsert list at this
//point
for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
maintenanceView.insertRow(maintenanceRow);
>
Sung

SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultant

Hi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Web pages posted to .Mac using iWeb do not render correctly on IE

Okay, let's face it - most people out there use Internet Explorer (IE) to view web pages. I just published my web page using iWeb onto my iMac account. The web site renders correctly on my Mac, but does not render correctly on my PC using IE at work. Several other people using IE saw similar problems. For example, IE does not show the links until you run your mouse over them. Also, the text renders as an image (you cannot select text individualy). What do I do to ensure that all the world views the site correctly? Thanks.

Welcome to the discussions, stoma.
You'll have to essentially dumb your site down to IE level. Get rid of the cool effects, the transparencies, the rotated images, basically everything that makes iWeb so impressive to use. Make a nice plain site with no frills and you're 90% of the way to near 100% IE compatibility.
Take all of your images and edit them outside of iWeb (like with other web applications) and that's another significant chunk. There will be a few bits left over, but some of those will be things you can't do anything about (like some of the page elements being created as .png's). You'll be as close to IE compatible as you can get with iWeb.
Post your URL to let other users post as to what your SPECIFIC site would need.

Media out or not loaded correctly when attempting to print since iOS 7 upgrade?

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

Erik,
Thank you for giving me the points. Generally you wait to award points until your problem is solved. It is totally your at your descretion.
OK.
This is still not clear. To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3. The cursor will change to a crosshair. Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release. The screenshot will appear on your desktop and will be named something like "".
Now click the camera icon in the tool bar for this forum:
, click the text box to allow you to navigate to, and select your screenshot.
Here is what you sent me:
The graph does not seem to be associated with the table of data you are showing. Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
This is what I would expect to see when highlighting a graph:
Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table". You can move your data into the table the graph refers to by copy and paste, or simply typing the values. You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
The Numbers Users' Guide is a great resource you should utilize and can be found here:
http://support.apple.com/manuals#macosandsoftware
The chapter on graphing (or charting) is 7 and starts on page 134.

"Non rectangular objects will not appear correctly when exported using CSS."

I am using Ind CC 2014 exporting a document to a reflowable epub. The document contains an .ai image. The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS." Any suggestions appreciated.

Thanks!
>
"Non rectangular objects will not appear correctly when exported
using CSS."
created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
/InDesign EPUB/ - View the full discussion
<https://forums.adobe.com/message/6886892#6886892>

Alter nate color applied in SSRS report is not updating correctly when you export to excel

alternate color applied in SSRS report is not updating correctly when you export to excel. Please let me know how can I resolve this issue
Smash126

Expression I am using report is
=IIf(RowNumber(
Nothing)
Mod2 = 0,
"Silver",
Nothing)
Smash126

Dashed Table borders do not render correctly when PDF created from MS word 2013

Similar Messages

Maybe you are looking for