Data copy and lookup

Hi Gurus,
I have the below scenario and would like to know what would be the best approach.
I have a planning model. (model name = Plan)
I have a copy of my planning model with an additional dimension cost center (model name = plan_copy)
I need to copy data from plan model to plan_copy model and populate the cost center dimension by lookup a DSO in BW.
DSO contains master data with the right keys that I need to lookup while copying data.
Please let me know what would be the best approach to do it?
Should I bring the DSO data in BPC somewhere? I can't bring it in a dimension as its one to many relationship data.
Should I bring it in any type of BPC model and write script logic to lookup in the new BPC model?
Can I use a BADI to lookup in the DSO while copying data?

We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables?

Similar Messages

Run the data copy and comments copy with the same key

I want to Run the data copy and comments copy with the same key.
I tried to challenge in the following way, but it is an error.
1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
2. Select the newly can process chain to add a package, make a change to the script as follows:
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%SELECTION_KEYDATE%,)
TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables?

ECC Data Copy and changes to salary information

We are planning a copy from our productioon system to our quality system and we would like to know what is the best way to change salary information in our QA environment.

Hi Davison,
My understanding is explained from your query, you dont need the exact salary details of data in prd system to be copied to QA system. If it sounds right, then I hope Infotype 8 cannot be mass changed using LSMW due to table control. I will suggest you to go for custom program.
With Regards,
Giriesh M

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

I have a hard disk drive with data that i want to back up onto another hard disk drive. I tried just copy and it won't let me paste it in the new drive. I have also tried to drag the files across and they won't go across. Does anyone know how to do this?

I have an external hard disk drive with data that I want to back up onto another extrnal hard disk drive. I have tried to copy and paste but this wont give me a paste option. I have also tried to click and drag but it wont let me either. I have reformatted the external hard drive to accept both mac and pc files and this did not make any difference. Can anyone help me with this?

How did you reformat the drive? If you formatted it as NTFS, your Mac will not be able to write files to it unless you use a small application such as Paragon's.
Please reply as to how you formatted the drive.
Clinton

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

How to copy and paste the data directly from the excel to the PDF?

hi,
I have found the same question on the link:
How to copy excel sheet to pdf form?
But I didnt get my answer through that forum.
My requirement is dat I should copy the data from excel sheet and directly paste it to PDF form.
When I am trying to copy and paste ..all the data is getting pasted into a single block only.
Kindly help.
Thanks & Regards,
Lina

So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors.

I want to move all my email data over the past several years from one yahoo account to another. I am told that I can use Thunderbird to copy and paste . How?

I wish to close down one email account but have no time to indivuidaully send emails out piecemeal to my newly set-up email address/account.
I want to keep the same InBox and Sent data columns as I have always had with dates associated with each email.
I was told that setting up Thunderbird to deal with emailing can facilitate this copying and pasting between two accounts.
Once done I wish to close my first email account ( its unfortuneately contractually linked to my old iphone 4 and I have changed cell phone companies so I am still keeping that account alive while I sort out how to move my data out into my new email account) and stick to using the new account.
Both are yahoo.co.jp email accounts. Yes, I live in Japan.
The Thunderbird program seems to have accessed and stored all of my email data . It did so quickly.
Please advise what to do next.
Thanks
JW

two ipods wrote:
I have my husband Iphone and an Ipad on one account. I have my own phone on another account. I want to move the Ipad from my husbands account to my account so I can purchase him an Ipad2 and I can use the old one with all the settings and apps as they are now and then update with my contact information.
How do I do this?
He will run into a problem when he wants to use his own account. Some apps will have been purchased on one Apple ID and other apps will have been purchased on a different Apple ID. That's a nuisance situation when the apps need updating and, unfortunately, there is no resolution at the present time (IDs can not be combined).

How to disable copy and paste in a field and allowing user to key in the data in that field...

Hi all,
I need your help on the below scenario.
I have to stop user to copy and paste the data into the field. But allowing user to enter the data in that field.
Please suggest.
Thanks and Regards,
Thiru.

Hi thiru
It sounds like you want a to write a PJC component to extend a forms text item that will capture and eliminate the key strokes and mouse actions used to copy and past thus preventing a user from performing this action. There are many examples on the interent of how this can be written e.g. the Oracle Forms PJCs/Java Beans web site. You will need to have jdeveloper to write thise bit of code. Oracle forms also has a tutorial on how to plug the JAR file you generate into your for sessions.
Regards
Quintin

APEX Bug: Web Sheets - Data Grid Copy and Paste

In Web Sheets:
Create Data Grid > Copy and Paste
Upload this data set (copy and pasted from Excel 2007):
A     B     C
1     2     3
4     5     6This will create a data grid with three columns (A, B, and C).
Upload this data set (i.e. in the 2nd row of data, B and C don't contain any values):
A     B     C
1     2     3
4This will create a data grid with only 1 column, A. B and C were not created.
Oracle XE
APEX 4.0.2
Martin
http://www.talkapex.com

Hi Martin ,
I tried the same thing which u said n its working Perfectly fine .
I m getting all the columns & both the rows along with data .
Regards,
Nandini Thakur.

Copy and paste excel data into database

We have moved from the oracle7.3.x and forms4.5 to oralce8i and forms 6? In the 7.3 and 4.5 enviroment being accessed via a terminal emulator, we were able to copy and paste into the fields for input. by using escape sequences
eg.
=CHAR(27)&"OP"     =PF1
=CHAR(27)&"OQ"     =PF2
=CHAR(27)&"OR"     =PF3
=CHAR(27)&"OS"     =PF4
=CHAR(27)&"[1~"     FIND
=CHAR(27)&"[2~"     INSERT HERE
=CHAR(27)&"[3~"     REMOVE
=CHAR(27)&"[4~"     SELECT
=CHAR(27)&"[5~"     PREV PAGE
=CHAR(27)&"[6~"     NEXT PAGE
=CHAR(27)&"[A"     UP
=CHAR(27)&"[B"     DOWN
=CHAR(27)&"[C"     RIGHT
=CHAR(27)&"[D"     LEFT
=CHAR(13)     RETURN
Is there a way now that we are using the Jinitiator applet to connect to our data base (three teir stucture)
Wayne Chang

Hi Sharon,
Did you ever get an answer to this issue? Everyday I hear from users of the forms i create, that they would like to be able to copy cells from an excel workgroup and paste them into the table of a form. I have even had people refuse to use my forms just because they cannot do this.

Can no longer copy and paste data from CD to disk

For the last little while, I can no longer copy (right-click > Copy "DATA CD") and paste (right-click > Paste Item) a data CD to a drive.
i keep getting the error "This operation cannot be completed because you do not have sufficient privileges for some of the items."
This is whether I attempt to copy to system drive (Desktop) or volumes which have their permissions ignored.
Thanks,
jim
Dual 2.0 G5 Mac OS X (10.4.4)

Never mind. Apparently there was something going wrong with the Finder. I ran Onyx, and things are back to normal now. I was concerned because I actually saw similar but not identical behavior on two Leopard machines. Running Onyx on the 2nd one now.

When I copy and paste from an online chart, some cells that had dashes or hyphens in them in the online chart paste into Numbers cells as dates, e.g., 12-13 pastes as Dec. 13, 2012.

When I copy and paste from an online chart, some cells that had dashes or hyphens in them in the online chart paste into Numbers cells as dates, e.g., 12-13 pastes as Dec. 13, 2012. I have tried changing the cell formats for that column from "automatic" to "text", but that doesn't fix it. Is there a way to copy/paste this information without changing the original characters?

If you know how many rows/columns you are planning to paste, then make the table that big BEFORE you paste. In addition select all cells in the table by selecting any cell, then type the key combination <COMMAND>+a (for select all.
Then use the cells inspector to make the cells formatted as text:
I hope this helps

Tcode for copying and pasting cofiles and data.

Hi,
i doing transport manually means going in se09 in qa and released and copied and pasted the cofiles and data request numbers from qa to prod then i imported the request number. but is it possible for doing copying and pasting cofiles and data through tcode rather than doing maually.help me plz.

Hi Raj
If you want transport tp requests manually.
you just login your quality system
and go to command prompt
then use this commends
add to buffer all qid pf=your profile path of your qa system
if you want single import
tpimport requestnumber targetsid clientnumber pf=targetprofile path
if you want mass import
tpimport all targetsid clientnumber pf =target profile path
Regards
Bandla

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

Data copy and lookup

Similar Messages

Maybe you are looking for