Data File-- atleast one member from each dimension is it mandatory??
Is it mandatory to have atleast one member each dimension in the data file that is used for loading into the Cube?If we leave one member from a dimension is it going to create a problem?So, If I want to load with different data files for different members of measures & is there any way to avoid extraneous member ( from one Dimension, the reason is cuz there are 2 dimensions out of which one may need not be actually included in the text file ) in the data file??Your views about this will be appreciated!!Thanks
In a load rule file, you can create something called a header - which can be used to specify member(s) that do not appear in the data file.To specify a header, choose Options / Data Load Settings / Header Definition. The caveat is that you can only choose one member from the missing dimension - you cannot specify multiple members from the same dimension. If that is the case, then the members will have to be in the data file.Regards,Jade---------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
Similar Messages
-
Space allocation on 11g R2 on multiple data files in one tablespace
hello
if the following is explained in Oracle 11g R2 documentation please send a pointer. I cant find it myself right now.
my question is about space allocation (during inserts and during table data load) in one table space containing multiple data files.
suppose i have Oracle 11g R2 database and I am using OMF and Oracle ASM on Oracle Linux 64-bit.
I have one ASM disk group called ASMDATA with 50 ASM disks in it.
I have one tablespace called APPL_DATA with 50 data files on it, each file = 20 GB (equal size), to contain one 1 TB table calll MY_FACT_TABLE.
During Import Data Pump or during application doing SQL Inserts how will Oracle allocate space for the table?
Will it fill up one data file completely and then start allocating from second file and so on, sequentially moving from file to file?
And when all files are full, which file will it try to autoextend (if they all allow autoextend) ?
Or will Oracle use some sort of proportional fill like MS SQL Server does i.e. allocate one extent from data file 1, next extent from data file 2,.... and then wrap around again? In other words it will keep all files equally allocated as much as possible so at any point in time they will have approximately the same amount of data in them (assuming same initial size ?
Or some other way?
thanks.On 10.2.0.4, regular data files, autoallocate, 8K blocks, I've noticed some unexpected things. I have an old, probably obsolete habit of making my datafiles 2G fixed, except for the last, which I make 200M autoextend max 2G. So what I see happening in normal operations is, the other files fill up in a round-robin fashion, then the last file starts to grow. So it is obvious to me at that time to extend the file to 2G, make it noautoexented, and add another file. My schemata tend to be in the 50G range, with 1 or 2 thousand tables. When I impdp, I notice it sorts them by size, importing the largest first. I never paid too much attention to the smaller tables, since LMT algorithms seem good enough to simply not worry about it.
I just looked (with dbconsole tablespace map) at a much smaller schema I imported not long ago, where the biggest table was 20M in 36 extents, second was 8M in 23 extents, and so on, total around 200M. I had made 2 data files, the first 2G and the second 200M autoextend. Looking at the impdp log, I see it isn't real strong about sorting by size, especially under 5M. So where did the 20M table it imported first end up? At the end of the auotextend file, with lots of free space below a few tables there. The 2G file seems to have a couple thousand blocks used, then 8K blocks free, 5K blocks used, 56K blocks free, 19K blocks used, 148K free (with a few tables scattered in the middle of there), 4K blocks used, the rest free. Looking at an 8G similar schema, looks like the largest files got spread across the middle of the files, then the second largest next to it, and so forth, which is more what I expected.
I'm still not going to worry about it. Data distribution within the tables is something that might be important, where blocks on the disk are, not so much. I think that's why the docs are kind of ambiguous about the algorithm, it can change, and isn't all that important, unless you run into bugs. -
SQL to group the records and apply logic to pick one record from each group
Hi Friends,
I am looking for a query to group the records on certain columns in a table and then from each group I want to pick only one record based on certain rules.
May be having data laid out will make my point more clear to you. Here you go :
CREATE TABLE AD_LIST
FILE_NAME VARCHAR2(50 BYTE),
ACTIVITY_START DATE,
ACTIVITY_END DATE,
DIVISION VARCHAR2(50 BYTE),
ITEM_CODE VARCHAR2(50 BYTE),
MULT NUMBER,
RETAIL NUMBER,
AD_PAGE VARCHAR2(1 BYTE),
FORECAST NUMBER,
MEMO VARCHAR2(50 BYTE)
INSERT INTO AD_LIST VALUES ('FILE_1','01-APR-2010','15-APR-2010','B',1111,5,10,'A',10,'This must be in my result');
INSERT INTO AD_LIST VALUES ('FILE_1','01-APR-2010','15-APR-2010','B',1111,1,1,'B',15,'Must not be in my result');
INSERT INTO AD_LIST VALUES ('FILE_1','01-APR-2010','15-APR-2010','B',1111,6,15,'C',11,'Must not be in my result');
INSERT INTO AD_LIST VALUES ('FILE_1','16-APR-2010','30-APR-2010','N',1111,4,20,'D',40,'Must not be in my result');
INSERT INTO AD_LIST VALUES ('FILE_1','16-APR-2010','30-APR-2010','N',1111,5,15,'E',30,'Must not be in my result');
INSERT INTO AD_LIST VALUES ('FILE_1','16-APR-2010','30-APR-2010','N',1111,1,2,'F',20,'This must be in my result');
CREATE TABLE PAGE_RANK
AD_PAGE VARCHAR2(1 BYTE),
RANK NUMBER
INSERT INTO PAGE_RANK VALUES ('A',1);
INSERT INTO PAGE_RANK VALUES ('B',2);
INSERT INTO PAGE_RANK VALUES ('C',3);
INSERT INTO PAGE_RANK VALUES ('D',4);
INSERT INTO PAGE_RANK VALUES ('E',5);
INSERT INTO PAGE_RANK VALUES ('F',6);
COMMIT;
SELECT * FROM AD_LIST
FILE ACTIVITY ACTIVITY ITEM AD
NAME START END DIV CODE MULT RETAIL PAGE FORECAST MEMO
FILE_1 4/1/2010 4/15/2010 B 1111 5 10 A 10 This must be in my result
FILE_1 4/1/2010 4/15/2010 B 1111 1 1 B 15 Must not be in my result
FILE_1 4/1/2010 4/15/2010 B 1111 6 15 C 11 Must not be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 4 20 D 40 Must not be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 5 15 E 30 Must not be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 1 2 F 20 This must be in my resultNow, from the table AD_LIST I want to group the records based on FILE_NAME, ACTIVITY_START, ACTIVITY_END, DIVISION, ITEM_CODE.
So in my example here we have 2 set of records grouped based on the columns specified.
Also we have one more table, PAGE_RANK, which has a rank corresponding to each ad_page number. Here 1 is higher rank than 2. Hence ad page 'A' takes priority over 'B'. Similarly for all other ad pages.
Now, we need to pick one ad from each group of ads by determining the highest ranked ad page within the group and the value for mult and retail must be replaced with the value that has min(retail/mult). So, using the above data we will have the one having ad page = 'A' and ad page = 'D' as the final results since they have highest ad page rank in their group.
The value for mult and retail values for ad_page 'A' = min (10/5 , 1/1, 15/6) = 1,1(mult,retail).
The value for mult and retail values for ad_page 'D' = min (20/4 , 15/5, 2/1) = 1,2(mult,retail).
Finally I have this query below
SELECT a.file_name,
a.activity_start,
a.activity_end,
a.division,
a.item_code,
FIRST_VALUE (a.mult) OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY (a.retail /
a.mult))
mult,
FIRST_VALUE (a.retail) OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY (a.retail /
a.mult))
retail,
FIRST_VALUE (a.ad_page) OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY (b.RANK))
ad_page,
a.forecast,
a.memo
FROM ad_list a, page_rank b
WHERE a.ad_page = b.ad_pageThis query is giving me all the records but with the values what I wanted in Ad_Page, Mult and Retail columns.
How can I pick only one from each group.
I am getting this FILE ACTIVITY ACTIVITY ITEM AD
NAME START END DIV CODE MULT RETAIL PAGE FORECAST MEMO
FILE_1 4/1/2010 4/15/2010 B 1111 1 1 A 15 Must not be in my result
FILE_1 4/1/2010 4/15/2010 B 1111 1 1 A 10 This must be in my result
FILE_1 4/1/2010 4/15/2010 B 1111 1 1 A 11 Must not be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 1 2 D 20 This must be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 1 2 D 30 Must not be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 1 2 D 40 Must not be in my resultBut I want this FILE ACTIVITY ACTIVITY ITEM AD
NAME START END DIV CODE MULT RETAIL PAGE FORECAST MEMO
FILE_1 4/1/2010 4/15/2010 B 1111 1 1 A 10 This must be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 1 2 D 20 This must be in my resultI have to run this query for thousands of such group combination.
Hope some one can throw some light on this query.
Thanks in advance,
Raj.Frank,
You are marvelous.
That is what I was expecting, but basically I want to display the row with highest page rank which is 'A' and 'D' in this case.
So I have changed my query as below using yours :
WITH mainq AS
(SELECT a.file_name,
a.activity_start,
a.activity_end,
a.division,
a.item_code,
FIRST_VALUE (a.mult) OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY (a.retail /
a.mult))
mult,
FIRST_VALUE (a.retail) OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY (a.retail /
a.mult))
retail,
--FIRST_VALUE (a.ad_page) OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY (b.RANK))
a.ad_page,
a.forecast,
a.memo,
ROW_NUMBER () OVER (PARTITION BY a.file_name, a.activity_start, a.activity_end, a.division, a.item_code ORDER BY b.RANK)
AS r_num
FROM ad_list a, page_rank b
WHERE a.ad_page = b.ad_page)
SELECT *
FROM mainq a
WHERE r_num = 1
FILE ACTIVITY ACTIVITY ITEM AD
NAME START END DIV CODE MULT RETAIL PAGE FORECAST MEMO
FILE_1 4/1/2010 4/15/2010 B 1111 1 1 A 10 This must be in my result
FILE_1 4/16/2010 4/30/2010 N 1111 1 2 D 40 Must not be in my resultMy apologies that I gave you wrong forecast and memo values in my earlier post.
But that is what I wanted and your input greatly helped me to save lot of time by using in one single query.
Earlier I was using cursor to do that and it was not doing any good performance wise.
Thanks to every body for your time and your efforts.
I appreciate it.
Have fun.
~Raj -
Can I have two Data Files in One control file of sql*loader tool
hi,
Can someone help me out. is it possible to have two Data Files in one control file of Sql*loader.
And isit possible to run 10,000 records before lunch and 10,000 records before tea and 10,000 records before evening session by giving breaks after every 10,000 records.
Thanks
RamYes. You can specify two datafiles in one control file and can load using sql loader.
I give you the sample control file.
Load DATA
INFILE 'TEST1.CSV'
INFILE 'TEST2.CSV'
TRUNCATE
INTO TABLE TEST_P
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
(COL_1,
COL_2,
COL_n)
Hope It will help you.
-Karthik -
SQL query - select one row from each date group
Hi,
I have data as follows.
Visit_Date Visit_type Consultant
05/09/2009 G name1
05/09/2009 G name2
05/09/2009 G name3
06/09/2009 I name4
07/09/2009 G name5
07/09/2009 G name6
How to select data as follows
05/09/2009 G name1
06/09/2009 G name4
07/09/2009 G name5
i.e one row from every visit_date
Thanks,
MK Nathan
Edited by: k_murali on Oct 7, 2009 10:44 PMAre you after this (one row per date per visit_type)
with dd as (select to_date('05/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name1' Consultant from dual
union all
select to_date('05/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name2' Consultant from dual
union all
select to_date('05/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name3' Consultant from dual
union all
select to_date('06/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name4' Consultant from dual
union all
select to_date('07/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name5' Consultant from dual
union all
select to_date('07/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name6' Consultant from dual
union all
select to_date('07/09/2009','MM/DD/YYYY') Visit_Date, 'F' Visit_type, 'name7' Consultant from dual)
select trunc(visit_date) visit_date, visit_type, min(consultant)
from dd
group by trunc(visit_date), visit_type
order by trunc(visit_date);
VISIT_DAT V MIN(C
09/MAY/09 G name1
09/JUN/09 G name4
09/JUL/09 G name5
09/JUL/09 F name7or are you after only one row per date?:
with dd as (select to_date('05/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name1' Consultant from dual
union all
select to_date('05/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name2' Consultant from dual
union all
select to_date('05/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name3' Consultant from dual
union all
select to_date('06/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name4' Consultant from dual
union all
select to_date('07/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name5' Consultant from dual
union all
select to_date('07/09/2009','MM/DD/YYYY') Visit_Date, 'G' Visit_type, 'name6' Consultant from dual
union all
select to_date('07/09/2009','MM/DD/YYYY') Visit_Date, 'F' Visit_type, 'name7' Consultant from dual)
select trunc(visit_date) visit_date, min(visit_type) visit_type, min(consultant)
from dd
group by trunc(visit_date)
order by trunc(visit_date);
VISIT_DAT V MIN(C
09/MAY/09 G name1
09/JUN/09 G name4
09/JUL/09 F name5 -
How to clear data on only one member
<p>Hi</p><p>i have for members in my components dimension(Member A,Member B,Member C, Member D ).</p><p>i want to clear all data under MemberA, without touching anydata under other members.</p><p>i used the same dataload rule which i used for loading Member A,with changing the option from "Overwrite existingvalues" to "Substract existing values". But it gavea lot of errors.</p><p>can anyone suggest a better way.</p><p>thanks</p><p> </p><p> </p>
Depending on the size of your database, a calc script is an option:<BR><BR>Fix (@isdescendants(MemberA))<BR>Clearblock all;<BR>Endfix<BR><BR>You can test different combinations of this script on a small section of data.<BR><BR>If just one member:<BR><BR>Cleardata MemberA;<BR><BR>would work too.<BR><BR>If the database is very large a calc may be quite slow but again that can be tested.<BR><BR>Hope this helps.<BR><BR>
-
How to remove member from Alias dimension in EPMA 11.1.1.3
Hi,
We are using EPMA for controlling master data for HP and HFM. While uploading members using Flat file import, by mistake, we have added a member called "French" in Alias dimension. Because of that, now all of the HFM applications, which were deployed earlier, are showing error as "The 'Alias' dimension has been modified since the first successful deployment of the application..."
Now, if we are trying to remove the new member "French" from Alias dimension, we are facing error as "The following error occured: Member 'French' is referenced by another Member."
We have checked but still could not find any member which is referencing/has value against this French Alias member.
If you have faced such kind of problem earlier, then can any of you share your experience? That will be very much appreciated.
Thanks a lot in advance.Hi John,
This is the first time i have created the application and trying to deploy in new version
As per my understanding, while deployment Planning app gets interacted with 1.Essbase Server by creating outline 2. Shared services and last Planning
Today morning, I could see the application in EAS inspite of deployment being Aborted, So i have deleted that from Essbase
Now, I have created a new application, and tried deploying and gets the same error message and i don't see any app in EAS / HSS
Please suggest. -
How to load files up one step from local working directory
Good afternoon,
I have a project assigned to me that has some Ni TestStand code written to read files from a fixed directory and I would like to change this directory to be the directory where the TestStand seqeunce file is located.
Furthermore, I would like to be able to step back one directories and forward into a different directory. Is this possible? I know in linux his is done with ..\ preceeding the directory location
I want ot do this for variables in TestStand and also for pats in LabView.
Cna somebody provide me with the correct syntax, for example if
my seq file is C:\User\Test\myseq.seq
and I want to open an ini file located in
C:\Config\config.ini
Should I save the path for the variable as
..\..\Config\config.ini ??
Thanks,
-D1) If you want to use a relative path that is resolved the same way as a module path (i.e. using the teststand search directories where looking in the same directory as the sequence file is one of the default possibilities) you can do something like the following:
FindFile("..\\Config\\Config.ini", True, Locals.absolutePath)
2) RunState.SequenceFile.Path actually includes the sequence file's name, so if you want to build a path from that you would need to do something like the following to parse out the part of the path you care about (though maybe an extra ".." instead of doing this parsing works to get past the file name too, I've never tried that. Perhaps either way is fine.):
Locals.absolutePath = Left(RunState.SequenceFile.Path, Find(RunState.SequenceFile.Path, "\\", 0, False, True) + 1) + "..\\Config\\Config.ini"
3) Whether or not you need to build an absolute path or can use a relative path depends on what you are doing with the path, if you provide more details on what you are doing with the path we can let you know. In general, you should not use a relative path when calling a win32 API. See the remarks section of the following where it says, "Multithreaded applications and shared library code should not use the GetCurrentDirectory function and should avoid using relative path names.":
http://msdn.microsoft.com/en-us/library/windows/desktop/aa364934%28v=vs.85%29.aspx
Though if you are calling a TestStand API then a relative path might be ok, depending on the API call, because some teststand APIs can use the TestStand search directory algorithm to resolve the path (basically the equivalent of 1 above).
Hope this helps,
-Doug -
Insert data file name into table from sql loader
Hi All,
I have a requirement to insert the data file name dynamically into table using sql loader.
Example:
sqlldr userid=username/passwword@host_string control=test_ctl.ctl data=test_data.dat
test_ctl.ctl
LOAD DATA
FILED TERMINATED BY ','
INTO TABLE test
(empid number,
ename varchar2(20),
file_name varchar2(20) ---------- This should be the data file name which can be dynamic (coming from parameter)
test_data.dat
1,test
2,hello
3,world
4,end
Please help..
Thanks in advance.
Regards
Anujyou'll probably have to write your control file on the fly, using a .bat or .sh file
rem ===== file : test.bat ========
rem
rem ============== in pseudo speak =============
rem
rem
echo LOAD DATA > test.ctl
echo FILED TERMINATED BY ',' >> test.ctl
echo INTO TABLE test >> test.ctl
echo (empid number, >> test.ctl
echo ename varchar2(20), >> test.ctl
echo file_name constant %1% >> test.ctl
echo ) >> test.ctl
rem
rem
rem
sqlldr userid=username/passwword@host_string control=test.ctl data=test_data.dat
rem =============== end of file test.bat =======================
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_field_list.htm#i1008664 -
Allowing only one response from each emailed form.
I am interested in creating a survey/voting scenario and allowing people to submit their responses including their vote. My issue is that as the program stands now a person could actually fill out their form multiple times and submit multiple votes. Is there a way to limit the responses from each emailed form to one?
ThanksThis was answered here: http://forums.adobe.com/thread/1109120?tstart=0
-
I am having a problem trying to migrate some old email messages from a PC running Windows live mail.
I downloaded Thunderbird to the PC and imported the email messages and folders into Thunderbird and was able to create Mbox files for all the folders and messages. I copied these files to a usb stick and then tried to export the folders and messages to my iMac running Lion. It appeared to copy the folders to the Mac but only one message per folder was placed on the computer. Does anyone have any ideas on how I should proceed to copy these email messages over? Thanks.I am having a problem trying to migrate some old email messages from a PC running Windows live mail.
I downloaded Thunderbird to the PC and imported the email messages and folders into Thunderbird and was able to create Mbox files for all the folders and messages. I copied these files to a usb stick and then tried to export the folders and messages to my iMac running Lion. It appeared to copy the folders to the Mac but only one message per folder was placed on the computer. Does anyone have any ideas on how I should proceed to copy these email messages over? Thanks. -
How to send data (file and text both) from jsp to servlet
upload JSP
case 1>> if i am using this <form enctype="multipart/form-data" the file value is comming on the servlet side
and other vales are not comming when i am using request.get parameter(....);
case 2>> if i am using this <form type="text/html" the "submissionperiod" and "Types" value is comming on the servlet but the file is not comming ........
How to resolve this issue . i need to send all the three parameter on single submit and retrieve the parameter values in my servlet .
please help !
<form enctype="multipart/form-data" name="form" method="post" action="Upload" >
<table font size="3" style="color:brown;font-family:Arial" >
<tr>
<td>Submission Year: </td>
<td><select name="submissionperiod">
<option value="">--select--</option>
<option value="2000">2000</option>
<option value="2001">2001</option>
<option value="2002">2002</option>
<option value="2003">2003</option>
<option value="2004">2004</option>
<option value="2005">2005</option>
<option value="2006">2006</option>
<option value="2007">2007</option>
<option value="2008">2008</option>
<option value="2009">2009</option>
</select><label class="Required">*</label></br></td>
</tr>
<tr>
<td>Submission Type : </td>
<td><select name="types" onchange="showDescription()">
<option value="">--select--</option>
<option value="CRF">CRF</option>
<option value="NIR">NIR</option>
<option value="NC">NC</option>
<option value="SEF">SEF</option>
</select><label class="Required">*</label></br></td>
</tr>
<tr><td></td><td>
<div id="divTypeDetails">
<textarea id= "subTypeDes" name="subTypeDes" value=""></textarea></br></br>
</div>
</td>
</table>
<td>Select a file (< 100 MB): </td>
<td><input id="importFile" name="importFile" type="file"></br>
</td>
<input type="hidden" name="types">
<input type="hidden" name="submissionperiod">
<input type="submit" id="submitButton" name="submit" value="Upload" onclick = "checkUploadValidity();"/>
<input type="button" name=btncancel id=btncancel value="cancel" onclick= "btncancel_click()"/>
</form>Both the file and text values are included in the binary inputstream of the request. The parametermap is always empty.
There exist 3rd party API's to parse multipart/form-data streams, such as [Apache Commons FileUpload API|http://commons.apache.org/fileupload].
Read at least the 'User Guide' and 'Frequently Asked Questions' sections. -
Can we delete the member from year dimension in hyperion planning??
Hi All,
Unfortunatley when adding the dimension members it have to add 2 yreas but i click 22 so its added 22 years in the dimension.
so i want to delete the extra members from the year dimension. is it possible in planning to delete year members
please if possible let me know how it is possible???
Cheers,
kittu.It can be done by SQL but it is not supported, the safest option is just to restore from backup before the changes were made
Cheers
John
http://john-goodwin.blogspot.com/ -
LSMW using one data file, via Direct input
Hi All,
I have to perform the below LSMW with Direct method only.
We have only one data file with one row containging header and item data. i.e. each row from data file will create one header record and item records.
Each row will have some columns corresponding to header data and some corresponding to Item data.
Now the problem is:
In the data file, we will get one record/line, but we need to create 2 or more items/lines for the same line(of data file).
Letu2019s say: we get this record in the extract:
16 1256 AB 67999 C
When we map this record to SAP structures we will have:
BBKPF u2013 Header
BBSEG u2013 1st Item, we can map this
BBSEG u2013 2nd Item, we need to create this second item structure programmatically. how to do this ???? any idea
Regards,
Pankaj
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Jul 1, 2011 10:48 AMData file will be some what like:
Col1 Col2 Col3 Col4 Col5 Col6 [just an example]
Where, Col1 =, Col2 and Col6 are for header data and Col3 and Col4 for Item data. Based on header data value on Col2 we have to create multiple Items.
e.g. If Col2 is inbetween 0 to 100, then Create only 1 Item
If Col2 is inbetween 101 to 1000, then Create 2 Items
If Col2 is iabove 1000, then Create only 3 Items
There is another logic (Based on some other Header fields) to fill different values for different Items
Hope this expalins the scenerio.
Regards,
Pankaj -
I have 100 data files, I want to join them together as one data file
I need to join approx. 100 data files into one data file, and be able to read back each data file from that one big file. I would also like a feature to count how many files are in the main one file. The data files contain graphs, text and numerics.
What you want to do is not going to be easy to implement. The idea is that files are just binary data and you can join the data into one binary file. The trick is going to be creating the appropriate header for the binary file to include things like file location--the beginning and end of a subfile--as well as the number of files. The exact structure of the header is really left up to you and your imagination.
Why do you want to join all the files into one? It sounds like what you have works now and making one file increases the chances that all of your data will be lost if the file becomes corrupted. Also LabVIEW is limited to files of about 2GBytes, so you will be more likely to run into this limit.
Maybe you are looking for
-
How to call PDF Report with parameters in jdeveloper 10.1.3
Hi all, how to call PDF Report with parameters in jdeveloper 10.1.3 for example I have Report name is repdept.pdf with parameter as deptno and I want call this Report from JSP page ? thanks frank
-
Pen Tool Question...
The Pen Tool is my favorite / go to selection tool. But can it do the following... I've made a path and converted it to a selection, then filled the area with a color or texture (on it's own layer). Now I find that I need to adjust (fine tune) the sh
-
Biege G3 won't boot with OS 9.2
I purchased a biege G3 MT with OS 8.6 on eBay. Unfortunately, the OS is in French. I upgraded that to OS 9.2 and now it won't boot. No chime and it stops after the first icon during startup. It won't boot with extensions off nor with the CD. I tried
-
Unable enter recovery mode: Error 3F0
HP ENVY DV7T-7200 Windows 8 64-bit Hi: I just got the laptop above on Friday from my cousin (who wanted something MORE when this is an amazing computer as it is but I digress)... But since I didn't want his user files, name and software on there, I t
-
How do i sync firefox to my mobile phone only?
I have a HTC Sprint using Sprint hot spot.