Data flow from Flat file Source to OLEDB Destination

Hi All
I have Flat file Source data I am trying to Import OLEDB Destination so I am getting below
Whis Is Error I am getting at Flat File Source
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Flat File Source returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Can you please help Me I will Grateful to you Friends.

0
[Flat File Source [2]] Error: Data conversion failed. The data conversion for column "LongName" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page."
[Flat File Source [2]] Error: The "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" failed because truncation occurred, and the truncation row disposition on "Flat File Source.Outputs[Flat File Source Output].Columns[LongName]" specifies
failure on truncation. A truncation error occurred on the specified object of the specified component.
Which Is error I have got Thanq for your time & let me know
Hi Visakh16 this is Complete error I have got

Similar Messages

Data loading from flat file to cube using bw3.5

Hi Experts,
                   Kindly give me the detailed steps with screens about Data loading from flat file to cube using bw3.5
       ...............Please

Hi ,
Procedure
You are in the Data Warehousing Workbench in the DataSource tree.
       1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
       2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
The DataSource maintenance screen appears.
       3.      Go to the General tab page.
                            a.      Enter descriptions for the DataSource (short, medium, long).
                            b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                            c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
       4.      Go to the Extraction tab page.
                            a.      Define the delta process for the DataSource.
                            b.      Specify whether you want the DataSource to support direct access to data.
                            c.      Real-time data acquisition is not supported for data transfer from files.
                            d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
Choose Properties if you want to display the general adapter properties.
                            e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                              f.      Depending on the adapter and the file to be loaded, make further settings.
■       For binary files:
Specify the character record settings for the data that you want to transfer.
■       Text-type files:
Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
Specify the character record settings for the data that you want to transfer.
For ASCII files:
If you are loading data from an ASCII file, the data is requested with a fixed data record length.
For CSV files:
If you are loading data from an Excel CSV file, specify the data separator and the escape character.
Specify the separator that your file uses to divide the fields in the Data Separator field.
If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                            g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                            h.      Make the settings for currency conversion, as required.
                              i.      Make any further settings that are dependent on your selection, as required.
       5.      Go to the Proposal tab page.
This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                            a.      Specify the number of data records that you want to load and choose Upload Sample Data.
The data is displayed in the upper area of the tab page in the format of your file.
The system displays the proposal for the field list in the lower area of the tab page.
                            b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
       6.      Go to the Fields tab page.
Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                            a.      To define a field, choose Insert Row and specify a field name.
                            b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                            c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                            d.      Change the data type of the field if required.
                            e.      Specify the key fields of the DataSource.
These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                              f.      Specify whether lowercase is supported.
                            g.      Specify whether the source provides the data in the internal or external format.
                            h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                              i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                              j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                            k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                              l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
       7.      Check, save and activate the DataSource.
       8.      Go to the Preview tab page.
If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
This function allows you to check whether the data formats and data are correct.
For More Info: http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

Data loading from flat file into bw

Hi Experts,
When we load data from flat file into BW the sequence of fields in flat file should be matched with the transfer structure or communication structure?
wid thanX,
arijit

Arijit,
The sequence of fields in a flat file must be the same as this one in the transfer structure.
The comm and tran structures are the same after the first creation of datasource from flat file source system. After that someone could change the sequence in the CS -- if the mapping of fields in transfer rules remains unchanged, then the load is to be succesful.
In case of changing the sequence in TS you'll get either error or wrong load (values to be loaded into some infobjects will go to another ones.)
Best regards,
Eugene

Va31 shedule line agreement data upload from flat file

Hi abapers
I have to upload some data (va31) from flat file to my database (shedule line agreement data) I am using user exit for it...Cant get which user exit will solve the purpose and where to check it from..I tried using SDTRM001 , meeta001 and and the va45A series but its not working. I used break point on these user exits but its not stoping at break point.
Can any one help me where to find which user exit will work in this case?
Thanks in Advance
Annu

Hi Prash,
Check these posts:
Re: Increasing the length of Infoobject from 60 to 240 characters
Re: InfoObject > 60
Bye
Dinesh

Data updation from flat file to I.C. via ODS

Hi,
I have to load transaction data from 4 tables into 4 ods and these 4 ods data will be loaded to 1 info cube.so please tell me the best method whether to use 4 info sources for 4 ods or can i define all the info objects in one info source and use the same info source for all ods objects.
Thank you

Hello GanGa,
How r u ?
1st could u tell, the loads are from Flat File or Tables ?
coz ur Subject and the Message is getting clashed.
If u use Flat Files, then better go for 4 IS and 1 ODS is enough. Then update the cube.
If u r going to extract from Tables, then you have to create the Data Source using "Extraction from Views", for this u should have common key fields in all the 4 tables. In BW DataSource to InfoSource mapping should be 1 to 1.
Best Regards....
Sankar Kumar
+91 98403 47141

Vendor master data load from flat file

Hi Experts,
I am trying to load data from flat file. I am confused which info object i should use. My requirement is for info cube 0BBP_C01.
As i found for this info cube only two info objects are available: 0BBP_VENDOR and 0VENDOR. But in my flat file i have following fields: Vendor code, Vendor Name, Ultimate Parent, City, Country, Minority Status, Vendor Payment Terms. which all are together not present in either of info objects.
Please suggest which info object i must use. or should i create Z info object for my requirement?
Thanks in advance.
Regards,
Niranjan Chechani

Hi Kiran,
I am loading data through flat file. I am not getting your point like how to get attributes present in the R/3 system which I am not using in this case.
Hi rvc,
I have created two characteristics z info objects i.e. ZU_PARENT for Ultimate parent and ZVEN_PAY for Vendor Payment Terms.
When i am trying to add these two as attributes and add it as Navigational attribute, I am getting the error "Characteristic 0VENDOR: The attibutes SID table(s) could not be filled" (Message no. R7586)
Please suggest am i wrong somewhere?
Thanks and Regards,
Niranjan Chechani
Edited by: Niranjan Chechani on Nov 28, 2011 12:15 PM

Help Required regding: Validation on Data Loading from Flat File

Hi Experts,
I need u r help in the following issue.
I need to validated the transactional data loading to the GL Cube from Flat file,
1) The transactional data to the Cube to be loaded only if master data record exists for the 0GL_ACCOUNT info object.
2) If the master data record does not exits then the record need to be skipped from the loading and after the loading the system should throw a message saying that these many records have been skipped (if there are any skipped records.).
I would really appriciate u r help and suggestions on solving this issue.
Regds
Hari

Hi, write a start routine in transfer rules like this.
DATA: l_s_datapak_line type TRANSFER_STRUCTURE,
 l_s_errorlog TYPE rssm_s_errorlog_int,
 l_s_glaccount type /BI0/PGLACCOUNT,
 new_datapak type tab_transtru.
 refresh new_datapak.
 loop at datapak into l_s_datapak_line.
 select single * from /BI0/PGLACCOUNT into l_s_glaccount
 where CHRT_ACCTS eq l_s_datapak_line-field name in transfer structure/datsource for CHRT_ACCTS
and GL_ACCOUNT eq l_s_datapak_line-field name in transfer structure/datsource for GL_ACCOUNT
and OBJVERS eq 'A'.
 if sy-subrc eq 0.
 append l_s_datapak_line to new_datapak.
 endif.
 endloop.
 datapak = new_datapak.
 if datapak[] is initial.
abort <> 0 means skip whole data package !!!
 ABORT = 4.
 else.
 ABORT = 0.
 endif.
i have already some modifications but U can slightly change it to suit your need.
regards
Emil

Error occurred in the data uploading from Flat File in BPC NW

Hi,
I am doing Migration project from BPC MS to NW.
In this i am loading data from flat file to BPC NW. One error occured in this process that is Record Duplication.
Total 17000 records in that 7000 recards rejected by the reason of duplication.
The Information about Package Log
/CPMB/MODIFY completed in 0 seconds
/CPMB/CONVERT completed in 2 seconds
/CPMB/LOAD completed in 7 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
FILE= DATAMANAGER\DATAFILES\Aprilmayjun_2011_Budget_V1.CSV
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\ZAPRMAYJUN_2011BUDGET.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Task name CONVERT:
No 1 Round:
Record count: 17064
Accept count: 17064
Reject count: 0
Skip count: 0
Task name LOAD:
Reject count: 7230
Submit count: 9834
Application: CorpBudget Package status: WARNING
Could you help me in this at the earliest.
Thanks and Regards
Krishna

Hi,
You cannot send the duplicated with the standard import package. You need to create or add a new package and link to /CPMB/APPEND process chain and do the import. This would consider the duplicate entries also. It looks like you need somehow load all the records including the duplicate ones.
So on excel go to Manage Data -> Maintain Data management -> organize package list and add a new package and link to the standard BPC process chain /CPMB/APPEND.
Thanks,
Sreeni

Cube creation & Data loading from Flat file

Hi All,
I am new to BI 7. Trying to create a cube and load data from a flat file.
Successfully created the infosource and Cube (used infosource as a template for cube)
But got stucked at that point.
I need help on how to create transfer rules/update rules and then load data into it.
Thanks,
Praveen.

Hi
right click on infosource->additional functions->create transfer rules.
now in the window insert the fields you want to load from flat file->activate it.
now right click on the cube->additional functions->create update rules->activate it.
click on the small arrow on the left and when you reach the last node(DS)
right click on it->create info package->extenal data tab->give your FLAT file path and select csv format->schedule tab->click on start.
hope it helps..
cheers.

CUNIT error in data loading from flat file after r/3 extraction

Hi all
After R/3 business content extraction, if i load data from flat file to info cube, I am getting Conversion exit CUNIT error, what might be the reason, the data in the flat file 0unit column is accurate, and mapping rules are also correct, but still i am getting error with CUNIT.?

check your unit if you are loading amount or quantities what mapping you have and what you are loading from flat files.
BK

Regarding master data ,transactional data loading from flat file

Hi friends,
Please tell me how to load master data and transactional data from flat file ....
Thanks in advance ,
Regards,
ramnaresh.

Hi,
Please use the 'search forum' functionality and search the BI Forum with say 'flat file loading'. You would get plenty of links of previous threads.
BR/
Mathew.

Steps to create Data loading from Flat File to Info Cube in BI

Hi,
     I am very new BW, I need some one help. When I am trying to create info source i am any pop window stating to create Transaction data or master data.
     After creating Info source, I dont know how to assign this info source to source system (which i created).
      When select the context menu of info source I dont have option to assign the datasource.
      And one more thing is When I am creating the Info Cube. I cant understand how to create.
      Please some one help me how to map the fields to Source system.
Regds
Dave.

Hi,
For flat file upload, first you need to create the source system.
Then you need to create the infosource based on the format of the flat file you are going to upload or vice versa depending on your requirements.
Once your infosource is ready, right click on it and select assign datasource. Here you can assign your flat file datasource. Then create an infopackage and give the path from where the file is to be upload to BW (in the infopackage).
Also look at the thread below for procedure on flat file upload :
http://help.sap.com/saphelp_nw04s/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/frameset.htm
Cheers,
Kedar

Need help ASAP with Data Flow Task Flat File Connection

Hey there,
I have a Data Flow Task within a ForEach loop container. The source of the flow is ADO.NET connection and the destination is a Flat File Connection. I loop through a collection of strings in the ForEach loop. Based on the string content,
I write some data to the same destination file in each iteration overwriting the previous version.
I am running into following Errors:
[Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
[Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
[SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
I know what's happening but I don't know how to fix it. The first time through the ForEach loop, the destination file is updated. The second time is when this error pops up. I think it's because the first iteration is not closing the destination
file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.
This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.
Any help is greatly appreciated.
Thanks!

Thanks for the response Narsimha. What do you mean by FELC?
First time poster - what is the best way to show the package here?

Data Transfer from Flat file To SAP system,

Hi SAP Guru's,
My query is :
How to update Material master data by using idoc type MATMAS05 . The data is present in flat file at application server.
I am new to idoc area.Please provide me the sample program that how to update material master data by using standard idoc type.
I am clear with the point that we have to read flat file from application server to internal table.
But i got stucked at this point that how to update data from internal table data , by using standard idoc type MATMAS 05.
I am in real need.Please provide me with the answer of this query.
I will really appreciate your <<removed by moderator>> reply.
Thanks
Simran
Edited by: Simran_SAP on Aug 25, 2010 10:46 AM
Edited by: kishan P on Aug 25, 2010 4:36 PM

Hi Vinod,
Thanks for reply..
I am new to idoc area.and my requirement is to generate the idoc after reading data from a flat file. The file is passed to the application server
by a middleware . The SAP interface program reads the file from the application server and then starts processing the data. Please help me how to create the inbound IDoc and which FM needs to be used.
Please provide a sample Program .
This will really help..
Waiting fr ur early response.
Thanks
Simran

Loading Date fields from flat file to Oracle tables

Hi,
I have a flat file with a few date columns. I have given the format for the date field while creating the data store for the flat file. The format I used is 'YYYY-MM-DD'.
But I get an error when I execute it after associating the module with LKM & IKM.
The error message is as follows:
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?
OS command has signalled errors
Can anyone help me out.
Thanks

At the time of DataStore creation. You take that date field as string.
After this, in interface, when you map this date field with table field. You should use CONVERT(<field name>,DATE) in expression editor.

Data flow from Flat file Source to OLEDB Destination

Similar Messages

Maybe you are looking for