Data Flow Service while starting BAM services. Please help.

Hi,
I successfully installed BAM without any error. But when I start BAM i.e. START>ALL PROGRAMS>ORACLE BAM>STRAT ORACLE BAM, I recieve an error which says,
System error 3 has occured.
The system cannot find the path specified.
Even when I try to manually start the Data Flow service it gives the same error. But the Sadcsvc.exe file is present in the path specified.
What could be the cause for this error? How can I handle this?
Can anyone kindly help me with this.
Thanks for help,
Vishal

Hi,
I am not able to continue further. Please can anyone suggest what should be done?
Thanks,
Vishal

Similar Messages

Data flows are getting started but not completing successfully while extracting/loading of the data

Hello People,
We are facing a abnormal behavior with the dataflows in the data services job.
Scenario:
We are extracting the data from CRM end in parallel. Please refer the build:
a. We have 5 main workflows flows i.e :
   => Main WF1 has 6 more sub Wf's in it, in which each sub Wf has 1/2 DF's associated in parallel.
   => Main WF2 has 21 DF's and 1 WFa->with a DF & a WFb. WFb has 1 DF in parallel.
   => Main WF3 has 1 DF in parallel.
   => Main WF4 has 3 DF in parallel.
   => Main WF5 has 1 WF & a DF in sequence.
b. Regularly the job works perfectly fine but, sometimes it gets stuck at the DF’s without any error logs.
c. Job doesn’t stuck at a specific dataflow or on a specific day, many a times it strucks at different DF’s.
d. Observations in the Monitor Log:
Dataflow---------------------- State----------------RowCnt------LT-------AT------
+DF1/ZABAPDF
PROCEED
234000
8.113      394.164
/DF1/Query
PROCEED
234000
8.159      394.242
-DF1/Query_2
PROCEED
234000
8.159      394.242
Where LT: Lapse Time and AT: Absolute time
If you check the monitor log, the State of the Dataflow DF1 remains PROCEED till the end, ideally it should complete.
In successful jobs, the status for DF1 is STOP . This DF takes approx. 2 min to execute.
The row count for DF1 extraction is 234204 but, it got stuck at 234000.
Then we terminate the job after sometime,but for surprise it gets executed successfully on next day.
e. As per analysis over all the failed jobs, same things were observed over the different data flows that got stuck during the execution.Logic related to the data flows is perfectly fine.
Observations in the Trace log:
DATAFLOW: Process to execute data flow <DF1> is started.
DATAFLOW: Data flow <DF1> is started.
ABAP: ABAP flow <ZABAPDF> is started.
ABAP: ABAP flow <ZABAPDF> is completed.
Cache statistics determined that data flow <DF1>
uses <0>caches with a total size of <0> bytes. This is less than(or equal to) the virtual memory <1609564160> bytes available for caches.
Statistics is switching the cache type to IN MEMORY.
DATAFLOW: Data flow <DF1> using IN MEMORY Cache.
DATAFLOW: <DF1> is completed successfully.
The highlighted text in the trace log is not appearing in the unsuccessful job but, it appears for the successful one.
Note: The cache type is pageable cache, DS ver is 3.2.
Please suggest.
Regards,
Santosh

Hi Santosh,
just a wild guess.
Would you be able to replicate all the DF\WF , delete original DF\WF, rename replicated objects to original to DF\WF names(for your convenience)   and excute it.
Some time reference does not work.
Hope this should work.
Regards,
Shiva Sahu

Getting error while starting DB services.

Hello,
I made a mistake while starting DB Services.
Instead of starting DB services with ORACLE user I tried to start it with ROOT user and got Insufficient Privileges error.
Now when I am trying to start it with ORACLE user I am getting Listener error. Listener is not getting start.
Please tell me what to do
Thanks & Regards,
Ajay Sharma

AjaySharma wrote:
Hello,
I made a mistake while starting DB Services.
Instead of starting DB services with ORACLE user I tried to start it with ROOT user and got Insufficient Privileges error.
Now when I am trying to start it with ORACLE user I am getting Listener error. Listener is not getting start.
Please tell me what to do
Thanks & Regards,
Ajay Sharma
> I am getting Listener error
ERROR?
What Error?
I do not see any error.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002

Problem while starting Portal Service from service configuration

While starting Portal service i am getting following error message:
"Server xxxxx:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic"
Please help me to reolve this error
Edited by: Pande Sagar on Jul 15, 2010 11:46 AM
Edited by: Pande Sagar on Jul 15, 2010 11:49 AM

Following is the PortalApp.xml file
<?xml version="1.0" encoding="UTF-8"?>
<application alias="sample">
<application-config>
    <property name="ServicesReference" value="com.sap.portal.ivs.connectorservice,com.sap.portal.ivs.internalconnector"/>
</application-config>
<components/>
<services>
    <service name="sample">
      <service-config>
        <property name="className" value="sample"/>
      </service-config>
      <service-profile>
        <property name="test" value="na"/>
      </service-profile>
    </service>
</services>
</application>
sample.java file
package samp;
import com.sapportals.portal.prt.service.IServiceConfiguration;
import com.sapportals.portal.prt.service.IServiceContext;
public abstract class sample implements Isample{
private IServiceContext mm_serviceContext;
     public void init(IServiceContext serviceContext)
     mm_serviceContext = serviceContext;
     public void afterInit()
public void configure(IServiceConfiguration configuration)
     public void destroy()
public void release()
public IServiceContext getContext()
      return mm_serviceContext;
      public String getKey()
      return KEY;
Isample Interface
package samp;
import com.sapportals.portal.prt.service.IService;
public interface Isample extends IService
     public static final String KEY = "MySample.sample";
     public String hi();
Edited by: Pande Sagar on Jul 19, 2010 2:04 PM
Its getting deployed properly but from system administration >> system configuration >> service configuration >> from application >> administrate service >> List of services >> HERE ITS GIVING AN ERROR >> Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic
Edited by: Pande Sagar on Jul 19, 2010 2:06 PM

OBIEE 11g: Error while starting obiee services

Hi All,
I am facing problem while starting OBIEE services.
Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
I tried staring services through EM and OPMN, however I am getting the same error (in Presentation, BI Server, Scheduler, Cluster Controller log Files).
It's a cluster environment and I am able to start obiee services on node 2, however node 1 gives the error as mentioned above.
How can I resolve this issue?
Regards,
Deepak

Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Ping failed in Ready callback for proc:1035801255
All other log files (presentation, bi server, scheduler, cluster controller) contains the following error message:
Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
As per comments posted by you here: https://cn.forums.oracle.com/forums/thread.jspa?threadID=2326091
I checked FMW_SECURITY_SERVICE_URL parameter in the NQSConfig.ini file.
This parameter is using VIP (admin server listen to this) and not the actual IP of the server.
Should I change this URL and point it to actual IP.
What is the procedure to change this parameter using EM?

DOM_10079 error while starting integration services of Informatica 9.0

Hi Team,
We are getting error DOM_10079 while starting integration services of Informatica and integartion services not started . Repository service is running fine.
Thanks in Advance ,
Prashant Salve

This info is not sufficient to tell the reason.
Check your domain logs in admin console and see the error messages. Post your domain logs
Make sure integration services is connected with repository and also the code page

How do i deactivate the auto updation on my iphone 4,i want to use only watsapp but when i am turning on my celleular data all apps starts updating theirself,please help me

how do i deactivate the auto updation on my iphone 4,i want to use only watsapp but when i am turning on my celleular data all apps starts updating theirself,please help me.I am not using any internet pack other than watsapp.

iPhone do not do automatic update. You have to manually trigger the updates.
If your Settings > iTunes & App Stores > Automatic Downloads > Music, Apps, Books are ON then when you purchase any new content/item with any devices/computer iTunes, it will automatically download. Switch it OFF if you do not want that to happen.

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started". I need help because i'm enable do download the new update. Thanks

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
I need help, because i'm enable do download the new update.
Thanks

Type "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.

On start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

When I connect the iphone does not start automatically Itunes Please help me

when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I have

i've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works

"Expected Ship Date: Not available at this time." Please help.

I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
Please PM with details if possible. Thanks in advance!
Subject was edited by: Verizon Moderator

Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
If not, I have sent you a DM so we may help look into this.
NicandroN_VZW
Follow us on twitter @VZWSupport

I'm downloading Season 3 of Scandal. First two episodes have finished downloading. I cannot find them anywhere!!! Where can I find them so I can start watching? Please help!! .

I'm downloading Season 3 of Scandal on iTunes. First two episodes have finished downloading. I cannot find them anywhere!!! Where can I find them so I can start watching? Please help!!

Have you looked in the Videos app? Under the section TV shows (bottom middle button on the tabs)

I have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks

i have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks

Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

HT2534 im unable to get the none option while proceeding with itunes,,.please help me

im unable to get the none option while proceeding with itunes,,.please help me

Please help me understand your question. (What happens in vagueness, stays in vagueness.)

Data Flow Service while starting BAM services. Please help.

Similar Messages

Maybe you are looking for