Data getting used too fast

I'm having issues with my data 2 months in a row I have went down too 100 meg from 1 gig. Previously I wouldn't even use 500 meg and Im using it for the same stuff. In 2 years with an IPhone 4 and 4S this is the only 2 months. So I have turned my data off when I use Wi Fi as it appears when data is on its getting used even when Wi Fi is showing as active. So if anyone has had a similar issue I will appreciate coments.

I also have battery issues and I happen to do debugging and tester as a living. The battery problem does not seem to be due to hardware failure as much as a software bug, which should be tagged as critical. I first called support from my service provider and was sent a replacement device that, as you might expect, ended up with the exact same problems as soon as it got upgraded to firmware 3.1.
I ended up calling Apple support since my iPhone is still under warranty. I have to send them over my device... Honestly, it is getting more than annoying at this point! I lost a whole week without my iPhone since it is unusable. I have to now ship it over to Apple and wait. This means an extra 2 to 3 weeks in total, translating into a full month of paying the full iPhone service package, but without having the iPhone. I would hope to get a good compensation as this means a decent amount of money I am losing...

Similar Messages

My iMac is home to a 400GB photos library currently syncing to a 500GB iCloud a/c. My 3 MacBooks have much less space which I need and seems to be getting used up fast as it syncs.

My iMac is home to a 400GB photos library currently syncing to a 500GB iCloud a/c.
My 3 MacBooks have much less space which I need and seems to be getting used up fast as it syncs.
How do I reduce the size of the library on the MacBooks - I have already set optimise in preferences but it is using up the space available.
What happens when I download a movie - will it automatically reduce the size of the photos library or am I screwed?

JasonFranks wrote:
OK, had already done all that. My primary concern is whether the system will be fooled by the fact that it will take some time for the 400GB to upload and for the MacBooks to know what volume they are dealing with. It's currently at 100GB after over a day. I guess if it fails I can disconnect from the cloud on the MacBooks and delete the library, right.
If I was transferring data onto the hard drive could it really optimise that quickly?
What is your basis for trusting the magic - have you experienced this?
I've updated my Macs, my wife's Mac, her fathers Mac and my mothers Mac.
It worked everytime, but it takes a while (days or weeks if your library is large)

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Get "using too much power" message when charging with USB

I have a 4th gens iPod Touch that appears to have a number of issues:
1. get "using too much power" message when charging with USB
2. can't re-boot
3. unable to access iCloud Backup, Ignore and Settings button inactive
4. unable to unlock unit when using the Home button to turn the unit on

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

'Date created' instead of EXIF date getting used for batch naming/folders?

I've noticed that Aperture is using the file creation date as opposed to EXIF date/time info when it imports my photos. Camera is a Nikon D200. Images are .NEF files.
If I allow Aperture to apply new master file names, based on Image Date - Image Time, it uses the Mac's file creation date (whenever the file was copied to the machine) as opposed to using the EXIF date and time.
I've already filed a bug with apple, but wanted to put it up here as well to see if others were having the same experiences.

Hello,
I use exiftool to modify the Creation and Modification time of the files. After that I use LR "Ajust time" feature to set the time of the movies in LR to the file creation time (last point). This works fine for me.
For MOV (Quicktime):
exiftool "-FileModifyDate<TrackCreateDate" "-FileCreateDate<TrackCreateDate"
For AVI:
exiftool "-FileModifyDate<DateTimeOriginal" "-FileCreateDate<DateTimeOriginal" *.avi
Depnding on your camera (and container format mov, avi) you may also ajust the time zone, e.g.
exiftool -FileModifyDate+=1 -FileCreateDate+=1 -if "$CameraModelName =~ /EOS 600D/i" *.mov
Which time in the container (MOV, AVI) you use as source, depends on your workflow. I edit my mov files before import. Therfore "CreateDate" is the time when I edited the file. Quicktime and (some) avi file contain a time when the containing stream was created. I use this vaule as source.
exiftool <filename> gives you detailed information about all available times.

Ipad battery get low too fast

Since some iOS Updates, my Ipad 3 has got an empty battery after 2-4 days. Before the updates my iPad was running 2-3 weeks in standby.
Does anyone have the same problem like me, and how did you solve it?

FYI
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or - Recalibrate the battery. See link below.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Movie Gets Big Too Fast

Any suggestions on how to keep movie file size down to fit on one DVD?
Am doing a family wedding video. But I'm over 3.5 gb and it's only 14 +/- minutes of raw clips at the highest quality setting. The wedding's not nearly over yet, forget about the before the wedding stuff and the reception.
For sure I'll trim and cut, but there's a ton of stuff I want to include, like music and slides, not to mention a lot more video footage and transitions. I'll also have to clean up the audio for the vows and all that and put it back in.
I know there are different quality settings. But I don't want to have to release the wedding on several DVDs. I will if I have to but would like to try to get it all onto one DVD.
What is your feeling about the compression settings available in iMovie? Any suggestions? Quality vs. Length. . .
And does file size matter with DVDs the same way audio CD's are based on time? Or am I comparing apples and oranges?
Thanks.
G4 Dual 1.25s Mac OS X (10.4.6)

Now are you talking about importing into iMovie?
Hi Frisbo.
I'm new to iLife and Quicktime, so bear with me, if you will.
Importing digitized hi-8 analog video into iMovie 6.0.2, where I intend to edit. Ultimately it will be burned to DVD for home TV viewing.
I was planning to go to iDVD 6.0.2. I have Quicktime 7.1.1 Pro. So one or all of those programs will be the route.
This is not for commercial release so I have a little leeway, though naturally the better the quality, the better my dinners will be when I visit the newlyweds
If thats what you are planning to do, you might have to
export with the 2nd best video size. (CD-ROM). That
will save up a ton of space, but you won't get the
GREATEST video quality, but you can get quality that
your able to see.
Is that gonna work?
Yes. Definitely helpful and I've done a couple tests based on your comments. Thanks.
That leads me to refine the question for an expansion from you:
Before I actually burn a DVD as a test, do you know how long playtime a DVD will hold at that resolution you mention? Up to 90 minutes or so?
And should I grab from my camera at the highest resolution and work in highest rez and then only worry about compression when outputting? I have plenty of ram.
Or is it better to keep the same quality from capture to edit to burn?

Suddenly using too much data?

Hi everyone,
I have had my iphone 5 for over a year. For the first couple of months I had problems with using too much data but eventually learned it was my email causing the issues (it was updating automatically). Fast forward this past Christmas. I got an iPad 2, and ONLY use it at home when it's connected to WiFi. To be completely honest, I am not even 100% sure if it supports cellular data at all, although I don't believe it does as there's nothing mentioned of cell data in Settings. Now for the past 2 months, I have been using too much data and having to pay extra on our cell bill and I have no idea what has changed besides updating the iPad and my phone (I just updated my phone a couple days ago) to iOS 7.0.6. The charges aren't enormous or anything, I think it was around $8 extra last month but still, I don't know what has changed. I have already gotten a text from my provider (Telus - Canadian company) today saying that I am now paying for my data usage, because we (my husband and I combined) have used our data alotment for the month. I know the problem is my phone because I used about double the amount of data as he did on our last bill. I tried calling my provider, but I was on hold for ages so I will give it another go tomorrow if I can't get something figured out in the meantime.
So my questions are: 1) Could it be the iPad using data? I do have it set so that it backs up to iCloud when plugged in (I believe, my sister in law set it up for me), and it syncs my photos from iphone to the ipad. As you can probably tell, I am just slightly technologically illiterate here. I also did get a new keyboard case for it last month that uses bluetooth.
2) If it's not the ipad, any ideas of where the data could be going? I use my phone mainly for texts and calls, Facebook, email, some internet browsing, but it is set to WiFi. I mostly use it at home where there is a WiFi connection. Although my young kids do play Angry Birds and watch some videos when we are driving. I don't believe the amount of games they play and videos they watch have changed though, that has been an ongoing thing.
Thanks for any advice, I would like to nip this in the bud before something gets out of control.

Update: I got my bill today, and as suspected I have used way more than half of our shared data plan (which is 1GB - I used 1760Mb). I have had my cellular data either completely turned off, OR turned on but not allow any apps to use it (I noticed that I was having some issues with not being able to send/receive texts if my data was compeltely turned off... Not sure why, but that's another post I guess) since I started this post. I called Telus and she wasn't able to tell me where any of my data was going, she just kept saying "well you've only spend $3.69 in data for last month" and asked me if I was completely closing out apps, which I do every other day or so. She just recommended that I download an app called My Data Manager to set a limit on how much cellular data I am using, however the app doesn't tell me WHERE the data is going which is my concern. So I'm kind of back at square one. I'm not sure if I should allow my kids to play their games and do as I normally do on the phone until the data gets racked up and then I can try to figure out where it's going, or what. My billing cycle started on March 18 and since then I have used 1MB (approx.) of data, but I was in the US for 4 of those days and had the data turned off completely, so again not sure where that 1MB went. One thing I have started doing that is new, is playing downloaded music (music that I have on iTunes, and put onto my phone) in the car. I thought since it is music that I have put onto the phone (not streaming music) it wouldn't be using any data, but on March 19 (the day before we left for the US), I was playing music in the car with my data turned off, and when a song ended and I tried to play another one it said that the cellular data was turned off and I needed to turn it on. I didn't turn it on, but I did put the phone into airplane mode and was able to play my music that way. Could that be using cellular data? If so, then I know where it has been going!

Getting current date without using client's clock

Is there a way to get the current date without using client's clock?
The java application we developed has many windows on which the Current Date is an important display field. As it's used 24x7, we need to make sure the date is current.
Right now, we make a CORBA service call to get the date from the server everytime the user Resets any of these windows. This is causing a peformance issue due to the slow service call.
Is it possible to get the Date once from the server and then start a timer to derive the date thereafter. Will a change in the client's clock affect this logic ? Can we implement this without using client's system time.
Or is there another better way ?
Thanks for your help.

If I can summarize your current requirements:
1. You need to know the time.
2. You don't trust the client's clock so you want to get the time from another computer.
3. You want this access to be "not too slow".
I find requirement number 2 to be peculiar, I've never seen an application that doesn't accept the time on the client system as valid. However, there it is. Maybe it's a system for checking employees in and out, and the smarter ones have been faking out the system by changing the clock. If your CORBA connection is too slow, and NTP is too slow (it takes the little program I got from USNO about 3 seconds to synchronize my clock), why not write your own time server? A simple web server that returns only the time to any request would work. If that's not fast enough then I'd suggest you're out of luck.

Battery too fast get low

just use 4 hour battery low battery

Some of the links below cover extending battery time.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
The Ultimate Guide to Solving iOS Battery Drain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Hello. I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support

I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

My I-phone 4 is using too much memory storage. Data

My I-Phone 4 is using too much memory. It shows Apps at 1.44 and Data & Documents at 1.68, not to mention "other" using up more memory. I have tried eliminating apps but nothing changes. How does one get rid of some of this "stuff" that is using up so much memory??

http://osxdaily.com/2013/07/24/remove-other-data-storage-iphone-ipad/

Can the USB NI DAQs be used for process control,eg.closed loop? or is too fast

can the USB NI DAQs be used for process control,eg.closed loop? or is too fast.

Hi mho,
1.usb is very high speed that is correct.Better you can choose PCI DAQ.But thats upto you.
2. see this:-
http://sine.ni.com/nips/cds/view/p/lang/en/nid/14136
3.If Matlab support TCP/IP, that could be an option.
see Another idea: http://digital.ni.com/public.nsf/allkb/244A37667BD7CBCE86257520007F937B
Another simplest way to do it (assuming you running Windows) is to use a Matlab script.
If both programs running on different systems:-
Most simple and slow - Create two VI's with shared variable on both machines, and use a matlab script to
share data. (this makes matlab some kind of "slave").
More advanced but still relatively slow (Create two VI's with shared variable, on the Matlab machine build the .NET
dll, and it can be used on Matlab too ( at least at 2010b version, earlier version support only COM).
Create TCP/IP connection between two comps.
There is "out of the box" NI products, that communicate with Simulink models.You please do a simple search on that...OK
I think this link is also helpful for you:-
Procedimiento para la interface entre LabView 2009 y Matlab 2009b.pdf 1128 KB
Anyway All the best.Try....do it.
Thanks as kudos only

Interactive "on page load" animations in swf get messed up if clicked too fast

interactive "on page load" animations in swf get messed up if I click too fast "next page" or "previous page".
It seemes it can't manage on "page load" animations so fast, so as a result i have mixed animations for example of page1 and page2.
if page1 has animation1 and 2 and i clicked next page, the next animation to appear is number 3 of page 2 , instead of number 1 which must be the first one to be triggered.
This only happens if i click fast and several times the "next page" or "previous page.

I have to say what you are trying might not be the best technique. The show hide might work ok for one or two items on a page but when you use it in the manner you are you are going to have the issues that you are now having...not to mention longer page loading do to larger file size of the page. My suggestion is to look into jquery and there are many plugins that can be modded to look the way you want however perform ten times better then using AP divs with show/hide.
Here is one example that I found of a jquery plugin. There plugin after plugin on the web for every scenario and they all can be modded to fit you needs. Do a search and you will eventually find something that fits your needs.
http://www.twospy.com/galleriffic/#7
http://www.twospy.com/galleriffic/example-2.html

How to get the values from struct data type using java code..?

Hi ,
I am newer to java.
we are using oracle database.
How to get the data from struct data type using java code.
Thanks in Advance.
Regards,
kumar

Hi Rajeev,
To retrieve a FilterContainer you will need to traverse the report structure:
ReportStructure boReportStructure = boDocumentInstance.getStructure();
ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
FilterContainer boFilterContainer = null;
if (boReportContainer.hasFilter()) {
boFilterContainer = boReportContainer.getFilter();
} else {
boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
Hope this helps.
Regards,
Dan

Data getting used too fast

Similar Messages

Maybe you are looking for