Data load issue _ error- ARFCSTATE= SYSFAIL.
Hello .
can you please give the solution for the issues of below.
I am using standard extractor structure to load the data to ODS from ECC to BI , the loading process as taking long time to loading , and data was came to PSA - NO ERROS, but i checked in the ECC side it showing - ARFCSTATE= SYSFAIL and finally job is finished . and also i checked in out bound queue there was around 30 LWE are there ., but in the inbound queue there was nothing selected .
every day same problem occurred , where as in updating manually PSA TO Data Target is it right
can any help me to solve the problem..
thanks ,
siva kumar
As you said 30 Luws were hung, select on of the hung TRFC/LUW and double click on it. it will display the message for not processing.
Goto monitor screen -- menu "environment" -- joboverview -- source system -- it will ask for id n pwd enter then select the job and click on job log...
can you post the job log?
TRFC did not processed in your case thats why load did not finished.This issue is due to Dead lock. check with the basis person.
Take help of BASIS
Try checking the TRFC queue/tn:SM58 if there is any recorded entried. You can also try to process the time limit exeeded TRFC manually by clicking on F6.
Also check the lockwaits and deadlocks in ST04/DB6COCKPIT. If you find any entries in deadlock contact basis team to resolve the issue.Take the help of BASIS to check it.
Try and let us know the status.
ARFCSTATE = SYSFAIL means the TRFC did not processed properly to the BW system from source.
Monitoring object with information about tRFC and qRFC calls that are waiting to be executed in this system; after they have been executed, they are deleted from table ARFCRSTATE.
check for short dumps in st22 if any and try to analyse.
Check the SM21 system logs.
Similar Messages
-
I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
ThanksOk, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
0HR_PY_PP_2 - data load issue
We have 0HR_PY_PP_2 which pulls deltas weekly. On 29th of June the data load failed with error posting runs are locked, try the transfer again. So we did repeat delta. The load was successful but it got 0 records. But the R/3 guys said there was data. When the chain ran next week i.e. on 6th July, it got all the data including the data which was supposed to be brought in the previous weeks load. Did any one face such an issue. We do not understand what could be the problem.Can some one please help.
Thank you!You should have run a normal delta run (no repeat delta) instead for
the following reason:
When you run the extractor in a situation when posting data is
still locked (by the actual posting process), the extractor stops
extraction immediately before it calculates any record and
puts it to the delta queue. However, a "repeat delta" run is a process,
that simply takes whatever it finds in the delta queue for the
specific extractor as the result of the last delta run, and resends
all these records to BW. It does not even invoke the application
specific extraction logic again. In this specific situation
this means, that 0 records are sent again and the timestamp is not
touched.
In other words, the correct procedure after a detection of a lock
of the posting data is to run a regular delta again when posting
has been finished."
regards,
Colin Moloney -
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Error in 0EMPLOYEE Master Data Load Issue
Hi,
We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
Can you please advice, how can we fix this issue ASAP as its a production issue?
Thanks!
Best regards,
Venkata> Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
Cheers,
Sree -
Master Data loading got failed: error "Update mode R is not supported by th
Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
NiravHi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM -
Hi gurus,
Presently i am working on BI 7.0.I have small issue regarding master data loading.
I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
How can i handle this.
Best Regards
PrasadHi Prasad,
Following is happening in your case:
<b>Loading 1st Time:</b>
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
<b>Loading 2nd Time:</b>
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi -
Hi All,
I have an issue where in flatfile load is failing.
I have flat 7 hierarchy flat files. We loading them from application server which is in Unix platform.But 2 files among them are failing.
When i copy the same files into my local computer which is in Windows platform and load them they are getting loaded without any error.What would be the problem.Is there any special character set that unix cannot identify.
Can any one advice on this.
Thanks in advance
BhanuHi Bhanu,
As you mentioned out of 7 files only 2 are faling .
a) Are the data in the 2 files similar to other 5 files which are successful ?
No
1. Check if its a data issue, error mesgs and at which line it failed and analyze or provide us details.
Yes
1. check the path of the file if its defined properly.
2. check why the load failed ..if its an error while lookup.
Hope it helps .
Thnks
Ram -
EIS Member and Data Load-Getting OS Error-Please help!
Please help! I have created a OLAP model then created a Metaoutline.
Then I went ahead to do the Member and Data load. I logged into my server and started the member and data load.
Then it gives me the following error:
SELECT /*+ */ .. FROM <my_view_name>
OS Error No such file or directory IS Error Member load terminated with error.
The load terminated with errors.
Thanks in advance for any replies.thanks all! the error has been resolved.
Jus had to create a directory in the Integration services folder: $ISHOME/loadinfo
the loadinfo folder was missing.
Prathap,
Is that view available at that time? --the query is generated automatically.
Which Data Source and which version of the Hyperion - datasource is Oracle10g and 9.3 is Hyp version. -
DATA LOAD ISSUE /NO ROLL UP MEMORY
Hello Team,
I have this master data load failure for FIS_BELNR. The problem which I think that everytime it tries to load it runs out of internal table space in the backend. I really don't know what it means. This data is been failing everyday because of the same problem.
I have attached all the screen shots and ABAP short dump analysis screen shots as well. One can read in details why is it failing it tells exactly what the problem is , but how to fix it.
Any more details needed please let me know.
ABAP runtime errors TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Occurred on 25.10.2007 at 02:53:55
>> Short dump has not been completely stored. It is too big.
No roll storage space of length 2097424 available for internal storage.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
hat can you do?
ry to find out (e.g. by targetted data selection) whether the
ransaction will run with less main memory.
f there is a temporary bottleneck, execute the transaction again.
f the error persists, ask your system administrator to check the
ollowing profile parameters:
ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
bap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
arameters for background processes:
Error analysis
The internal table "IT_62" could not be enlarged further.
You attempted to create a block table of length 2097424 for the internal
table "IT_62". This happens whenever the OCCURS area of the internal table
is exceeded. The requested storage space was not available in the roll
area.
The amount of memory requested is no longer available.
How to correct the error
Please try to decide by analysis whether this request is
reasonable or whether there is a program error. You should pay
particular attention to the internal table entries listed below.
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2595024
Extended memory (EM)........... 2001898416
Assigned memory (HEAP)......... 1886409776
Short area..................... 16639
Paging area.................... 24576
Maximum address space.......... "-1"
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
"SAPLZ_BW_EXTRACTORS " or "LZ_BW_EXTRACTORSU24 "
"Z_BW_AP_GL_BELNR"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
ThanksHello,
The memory of your internal table wants beyond the system configured threshold.
Decrease your package size or extend the mentioned parameters (basis task):
ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
abap/heap_area_total (100.000.000 - 1.500.000.000)
Regards, Patrick Rieken -
Hello All,
We had an EPMA Type HFM application whose all dimensions were local, The application validated and deployed successfully.
We tried loading data into the HFM application and the data load was successful.
Then we decided to convert all of the local dimension of the above mentioned HFM application as shared dimensions. After converting all the dimensions as shared dimension successfully we are getting error while loading data into the same HFM application (The app does validate and can be deployed after changes)
The Error log is below:
Load data started: 11/29/2014 10:53:15.
Line: 216, Error: Invalid cell for Period Oct.
ACTUAL;2014; Oct; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;11979
>>>>>>
Line: 217, Error: Invalid cell for Period Nov.
ACTUAL;2014; Nov; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;23544
>>>>>>
Line: 218, Error: Invalid cell for Period Dec.
ACTUAL;2014; Dec; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;58709
>>>>>>
Line: 219, Error: Invalid cell for Period Oct.
ACTUAL;2014; Oct; YTD; E_2100;<Entity Currency>;28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11979
>>>>>>
Line: 220, Error: Invalid cell for Period Nov.
ACTUAL;2014; Nov; YTD; E_2100;<Entity Currency>;28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11565
>>>>>>
Wanted to know whether there is something I might have missed while converting local dimension into shared (If there is any sequence to do so,or any constraint that I may not be aware of, though the conversion looks good as application is validated and deployed after changes)
What can be the reason for the failed data load, can anyone help?
Thanks
ArpanHi,
I would look at the account properties for that account (89920000) and see the TopCustom1...4Member. You will find the reason behind the invalid cells.
When you convert the local dimensions to shared, have you checked the 'Dimension Association' for Accounts and Entitities?
It does seem to lose the dimension association if a proper sequence is not followed.
Regards,
S -
Custom object - data loader issue
Hello guys.
I've just attempted to upload a CSV file in order to insert new records to a custom object.
after some tweaking I've managed to get it to work, the log stated 100% success but no new records appeared.
I've ran the data loader for "ordinary" objects (account, parts) with full success.
Any thoughts?
Thanks,
Adi Smulian
[email protected]The dataloader will often state 100% this does not mean that all the records were imported correctly. You will need to go to the data import queue to retrieve the findings of the import this will then tell you if you have any errors.
-
Dears,
we are trying to distrigute the data load functionality to base users.
However it seems that in our tests these kind of users can only use the option "replace by security".
If they try to run the data load without having selected this option, the system returns the following error:
"No write access to period December"
which is very weird as the period December is available for input to the same users through data entry forms.
Please help.This comes up when the user does not have write access to all the intersections in the subcube.
Let's say you have security on Custom 1 with members A, B, and C, and a file with some data.
If John only has Read Access to A, a replace by security will clear and load products B and C only.
If John tries a Replace load, it will attempt to clear all members, however because John does not have access to clear product A, this causes the error you're looking. -
2LIS_11_VAHDR Data Load Issue
Hello Gurus,
I have a cube which sources data from InfoSource 2LIS_11_VAHDR. ( It also sources from 2LIS_11_VAITM. )
The data-source, infopackage, update-rules etc. all is inplace.
(a)<b> In Monitor:</b>
Whenever I try to load data, in RSMO, I get - "yellow triangle" - ( 0 from 0 records ).
In "Detail" tab, I see
--- Extraction (messages): Errors Occured (yellow triangle)
Data request received ( green square )
Data selection scheduled ( green square )
No data available, data selection ended ( yellow triangle).
(b) <b>In InfoPackage</b>:
In "Update tab" the selection is "full update"
(c) <b>I tried:</b>
I tried to do "Replicate DataSources", then "Activated Update Rules, as well as InfoSource". Again ran the data load and checed in RSMO ( monitor), still see the ( 0 From 0 Records ).
How do I go about resolving this?
Would appreciate your help.
Thanks for your time.
Fellow Developer..
Pramod.Hi,
to check the data in setup tables
go to RSA3>give the data source name>click on extractor
note:when using RSA3, find out what the value of the "Update Mode" is before executing. If the "Update Mode" is F or C, it will look at the data from the setup tables. If it is D or R, then it will check the data in the delta queue. Use the drop down menu for the parameter to see what the different values are for "Update Mode".
option 2
For the datasource 2LIS_11_VAHDR
take the extract structure name which you can find in LBWE>select your application area>click on extract structures>pick the extract structure name for your datasource
ex:for SD sales BW application area(11)
the extract structure is MC11VA0HDR.
then
Go to se11 give the extract structure + Setup i.e MC11VA0HDRSETUP.
You can see the data.
Cheers,
Swapna.G
Maybe you are looking for
-
Hi there I am a designer of 14 years experience. When I start a site I usually mess about with text, backgrounds, sizes, alignments etc etc. I have been using CS4 now for a month and whenever I attempt to change font size, alignment etc, CS4 demands
-
How do I download music from my iCloud when I deleted it from my site and "hid" it in my iCloud.
-
Chapter Numbering not increasing
Hi guys I have been trying to add a chapter numbering but when i do it the number remains the same. What am I doing wrong? Both of those text have the same #Chapters style
-
Deploy using admin_client.jar to Oracle SOA suite started up with java cmd
Hey, Someone at work asked me to create a deployer command to deploy to a locally running OC4J SOA suite. I got it working like this: java -jar %ORACLE_HOME%\j2ee\home\admin_client.jar deployer:oc4j:opmn://localhost/home oc4jadmin oc4jadmin -deploy -
-
Weblogic 8.1 sp2 app deployments need too much time
Hi, I've just installed the new Weblogic 8.1 sp2 version. With this new version, I've got a very small application, and when I start Weblogic or redeploy that application, it lasts a lot (2 minutes) when it just needed a few seconds with Weblogic 8.1