Data Provider Internal error(-3000): please help!
Hi,
I've a Web Application using Oracle Data Provider 9.2.0.2 to communicate with mu oracle DB.
I'm using the ExecuteNonQuery function to run a SQL statement (it's a select connect by), but after some time, I get the following error:
Data Provider Internal error(-3000)
It seems to happen if the query takes a lot of time.
If I reduce the number of returned rows, I don't get the error anymore.
After some searches through the internet I found that the problem should fixed in the next ODP release, 9.2.0.4: I installed it too, but with no success.
I played with the connection timeout and some other parameters without solving the error.
Someone can help me?
Thanks.
Daniele.
I met the same question too.
I list your problem below:
my ODP.net is 9.2.0.4.
code snippet is below:
string constring = "user id=gz;data source=ipas_local;password=gz";
OracleConnection conn = new OracleConnection(constring);
OracleCommand cmd = new OracleCommand(sql,conn);
try
conn.Open();
cmd.ExecuteNonQuery();
catch(Exception ex)
doredirect = false;
lblMessage.Text = ex.ToString();
finally
conn.Close();
I have a Oracle9i DBMS which home_name is OraHome92 in my computer,and have a ODP.NET9.2.0.4 which home_name is ORADOTNET9 deferent from DBMS.
9i DBMS path:D:\oracle\ora92
ODP.NET 9i path:D:\oracle\ODPDotNet
my web app never work before
what's the meaning of "100% & consistently reproducible"?
how to know whether Connection pool is on or off?
Similar Messages
-
Data provider internal error(-3000) during DataAdapter.Fill
I get this error sporadically.
From other messages on this forum, it seems others are having similar problems. It appears the Oracle staff
is still struggling to identify and fix (or did I miss a post?)
I hope the next release can include some more informative diagnostic error messages. (no judgment implied, just a suggestion).
But I need this to work, so I'm posting my
info as well in hopes it will help.
Sorry for the length, but I think all the detail may be needed to diagnose.
I have been using ODP.Net for weeks without trouble
until recently. I just added a CLOB field to my table yesterday, and
the problem started. I don't know whether that's cause or coincidence.
Possible workarounds I will try:
1) Explicit select of columns rather than select *
2) Retry once on failure after short delay
Below, I'm including the exception message from the ASP.Net page.
It occurs at the same spot in my code, but often
it works fine. Now, an hour later, I cannot repeat the problem.
I've edited the "Source Error" section to
provide more of the code, so you can see the full context.
I've also pasted the stored procedure called so you can see what that is about.
I need this to work, so feel free to contact me if you need further information
to diagnose this in order to fix it.
I go live on March 7, so if I don't get a fix soon and can't find
a workaround, I'll just make a lame error message like "Site is very busy, please try again".
Even though the site is NOT busy. But having them try again seems to work.
And I don't want to tell them why I'm asking them to try again <grin>.
I am thinking of putting a try/catch block and sleeping for a second and then trying one more
time in my code. I'll let you know if that is an effective work-around.
David Kreth Allen
University of Minnesota
Carlson School of Management
[email protected] remove XYZ to send emails
612-625-0386
<WebPageError>
Server Error in '/ScholarshipApplicationWeb' Application.
Data provider internal error(-3000)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: Data provider internal error(-3000)
Source Error:
OracleCommand cmd = new OracleCommand();
cmd.Connection = new OracleConnection(
ApplicationEnvironment.current.database.OracleConnectionString);
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "pkg_batch.get_details";
cmd.Parameters.Add("batch_id",OracleDbType.Int32,
batchId,ParameterDirection.Input);
cmd.Parameters.Add("batchCursor",OracleDbType.RefCursor,
DBNull.Value,ParameterDirection.Output);
cmd.Parameters.Add("majorsCursor",OracleDbType.RefCursor,
DBNull.Value,ParameterDirection.Output);
cmd.Parameters.Add("detailCursor",OracleDbType.RefCursor,
DBNull.Value,ParameterDirection.Output);
OracleDataAdapter da = new OracleDataAdapter(cmd);
DataSet ds = new DataSet("batches");
da.Fill(ds);
DataTable dt = ds.Tables[0];
dt.TableName = "batch";
Source File: C:\Projects\ScholarshipSolution\ScholarshipLibrary\Data\ScholarshipApplicationBatch.cs Line: 329
Stack Trace:
[OracleException: Data provider internal error(-3000)]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, IntPtr opsSqlCtx, Object src, String procedure, String[] args)
Oracle.DataAccess.Client.OracleDataReader.NextResult() +1259
System.Data.Common.DbDataAdapter.FillNextResult(IDataReader dataReader) +98
System.Data.Common.DbDataAdapter.FillFromReader(Object data, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +261
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +129
Oracle.DataAccess.Client.OracleDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +516
Oracle.DataAccess.Client.OracleDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +290
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
CSOM.ScholarshipLibrary.Data.ScholarshipApplicationBatch.getDataById(Int32 batchId) in C:\Projects\ScholarshipSolution\ScholarshipLibrary\Data\ScholarshipApplicationBatch.cs:329
CSOM.ScholarshipLibrary.Data.ScholarshipApplicationBatch.GetById(Int32 batchId) in C:\Projects\ScholarshipSolution\ScholarshipLibrary\Data\ScholarshipApplicationBatch.cs:290
CSOM.ScholarshipApplicationWeb.BatchSummaryControl.Edit_Click(Object sender, CommandEventArgs e) in c:\inetpub\wwwroot\ScholarshipApplicationWeb\BatchSummaryControl.cs:68
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +110
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +138
System.Web.UI.Page.ProcessRequestMain() +1244
Version Information: Microsoft .NET Framework Version:1.0.3705.288; ASP.NET Version:1.0.3705.288
</WebPageError>
<PackageBody>
PROCEDURE GET_DETAILS(
p_batch_id IN number,
batchCursor OUT pkg_batch.refcur,
majorsCursor OUT pkg_batch.refcur,
applicationsCursor OUT pkg_batch.refcur
IS
BEGIN
OPEN batchCursor FOR SELECT
* FROM scholarshipApplicationBatch
where scholarshipApplicationBatch_id = p_batch_id;
OPEN majorsCursor FOR SELECT
* FROM major_response
where batch_id = p_batch_id;
OPEN applicationsCursor FOR SELECT
* FROM schol_detail
where batch_id = p_batch_id;
END GET_DETAILS;
</PackageBody>One workaround that seems to work is to retry in a loop.
Sample code is pasted below.
Obviously it may still fail, but less often.
I'll report any further changes that affect
the behavior in hopes it will assist the Oracle staff in
fixing it.
<CODE>
try
da.Fill(ds);
catch (OracleException excp)
const int maxTrys = 5;
int failureCount = 1;
bool succeeded = false;
for (int i = 0;i<maxTrys;i++)
try
System.Threading.Thread.Sleep(
TimeSpan.FromSeconds(1));
ds.Clear();
da.Fill(ds);
i = maxTrys;
succeeded = true;
}//try
catch
failureCount ++;
}//for
errorHandler.Report(
String.Format(
"Failure in da.Fill in ScholAppBatch. " +
" Failed {0} times. Finally Succeeded = {1}.",
failureCount.ToString(),
succeeded.ToString()),
excp);
}//catch
</CODE> -
Multiple installs of causing Data provider internal error (-3000) on Open
Hi,
We have an application written against Oracle ODP 10.1.0.401 that's been deployed out on a web farm working great for some time now, however recently another area has asked to get ODP for 11g installed on that server. The install originally broke our application, but we were able to resolve most of the issues after following all of the appropriate "PATH" reordering and registering appropriate dlls. In fact, we finally got a server completely back up and running both versions with no issues.
Unfortunately, it's a load-balanced server, and while one of the two servers is working correctly, the second seems to be having issues with specific parts of the install. We're trying to fix it on the second server now, and will be doing the same install shortly in our production environments.
I was able to break the error out and create a very simple test app to eliminate as many variables as possible. It appears to be an issue with the driver when we enlist into a Distributed Transaction.
The following code works fine:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase + "Enlist=False");
connection.Open();
While this code does not:
var connection = new Oracle.DataAccess.Client.OracleConnection(connectionStringBase);
connection.Open();
In both examples, connectionStringBase is Data Source=...;Validate Connection=true;User ID=...;Password=...; (where ... represents masked values). I've also tried "Enlist=True" in case the default was a problem, but it also fails.
The exceptions we're getting on the server happen in the .Open() call. The stack trace is:
[OracleException: Data provider internal error(-3000) [System.String]]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure) +779
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) +41
Oracle.DataAccess.Client.OracleConnection.Open() +3338
Default.Page_Load(Object sender, EventArgs e) in C:\Code\Oracle11gTest\Oracle11gTest\Default.aspx.cs:13
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +43
System.Web.UI.Control.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2604
I've read a few articles on this particular error and found that it's generally considered an ambiguous error with many potential causes, most of which I've been trying to test and rule out. While I don't have direct access to the server, I've been working with someone who does and they have compared registry settings and registered dlls, and have told me that the 2 servers match, and we've already re-installed the 10.1 drivers hoping it would help, but at this point we're stumped. I've read that it's possible that the COM+ install could have become corrupt, but what confuses me is that just prior to the 11g install, everything works great, and after doing no more than an ODP 11g install, it breaks. Do you have any advice or suggestions we could try?
Thanks in advance for any insight you might have!
~JeffIf I read your post correctly that this is a "everything is equal as far as we know, but box A works and box B doesn't" type situation, my first suggestion would be to get Process Explorer from http://sysinternals.com, and compare the loaded modules between the working and non-working servers. You'll probably find that you're not using the software you think you're using, or have mismatched dlls across homes, or something to that effect. Once you figure out what the difference between the two is, correcting it will probably be the easy part.
Hope it helps,
Greg -
NOKIA N80 Internal Error Message PLEASE HELP
Does anbody Know why I Get an Internal Error Message When I Send a Multimedia Message.... Everytime I Try to Send a Picture as Multimedia it Says Unable to Send Message and When I Click Details it Says Internal Error....... Please Help
-----
I thought maybe it was the site itself. Then I tried it with another site and the same problem
well, thanks for that info -- considering this I can´t help suspecting that your ADDT (or Dreamweaver) installation might be broken. For a start I suggest to uninstall/reinstall ADDT first and see if this solves your issues
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Internal Error 2739, Please Help!!!
When trying to install Fireworks CS3 Trial on my Windows
Vista-based PC, I get error code 2739. I contacted customer support
and they said that being this a trial software, that there is no
support avaiable. I don't understand why they wouldn't want to help
a potential customer. Can someone please help me?
Thanks in advance,
Michael A.:)
http://davidgardiner.blogspot.com/2007/02/internal-error-2739-on-vista-x64.html
alex
Alex Mariño wrote:
> This might help:
>
>
> rcmadiax wrote:
>> Anyone? -
Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help. -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
The server encountered an internal error. Please retry the request.
Hi,
I have a VM with Windows 2012 Server. It has an automation script to start the VM every day at 7 o'clock and end at 23:30.
Point is that until yesterday it worked well but this morning didn't started. I've been trying manually but until now it have been impossible to start the VM.
After a while I have the following error message: "The server encountered an internal error. Please retry the request."
I don't know what else I could do to not lost the productive data in the server and start it without problem.
Any help will be appreciated.
Thank you in advance,
SergioHi,
In some cases as availability of free blades or free space within a blade in a cluster fluctuates, the constraints to find an allocation for the service may not be met. When these constraints are not satisfied, we return back an allocation failure error
message.
To avoid this error create multiple affinity groups to house services that are not required to be placed together, spin up smaller numbers of VM’s at a time, ensure retry logic is in place when an operation is unsuccessful and also utilize multiple datacenters
for your deployments.
Try Multiple Restarts for the VM, however if the VM still does not start, please try the below steps
Resize the Virtual Machine from the Portal but ensure to Back up the Data in the Temporary Drive ( D:\) since the data will be lost while Resizing.
If the issue is still not fixed, please recreate the VM by retaining the attached Disk’s and attaching the same to the new VM
Hope this helps !
Regards,
Sowmya -
Error: The server encountered an internal error. Please retry the request.
I constantly gets this error "The server encountered an internal error. Please retry the request" whenever I try to start my VMs. Sometime it takes 4 - 5 tries to start a VM. What's wrong here? any idea?
thanks.In order to diagnose further we might require further more information including Subscription ID and Log Reports.
Microsoft respects Customer Data Privacy and hence would not recommend you to share the same on public forum.
I suggest you to try Analyzing the Operations History from the Management Portal. It helps you to view Historical Logs of all Create/Update/Delete Operations performed on all Services in Azure
You might want to refer to the below link to know more about Operation Logs
http://blogs.msdn.com/b/azuremobile/archive/2013/11/26/operation-logs.aspx
Hope this helps !
Regards,
Sowmya -
I must find my find my iphone data for last 1 year please help me
i must find my find my iphone data for last 1 year please help me
I confirmed, I have turned on " find my iphone. Here is the error I encountered
-
HI, I am trying to use quickVm create in powershell as I have a need to autmate the creation. Since this monring, I am stryudggling to acheive this task. Cloud service gets created and deployed and then I get :
OperationDescription OperationId OperationStatus -------------------- ----------- --------------- New-AzureQuickVM 2afd21d7-e246-8883-903f-5b80ef3f223d Succeeded New-AzureQuickVM : InternalError : The server encountered an internal error. Please retry the request.At line:1 char:1+ New-AzureQuickVM -Windows -ImageName $imagename -InstanceSize ExtraSmall -Locati ...+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : CloseError: (:) [New-AzureQuickVM], CloudException + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.ServiceManagement.IaaS.PersistentVMs.NewQuickVM
I tried again, I came across another error
New-AzureQuickVM : Service already exists, Location cannot be specified.
According to powrshell doc, we can reuse an exisiting service name but it seems that this is not true, I needed to remove the cloud service manually in the portal, I reissued agai and again but getting always the same error
The server encountered an internal error. Please retry the request.
Thanks for your help$location="North
Europe"
$imagename
="a699494373c04fc0bc8f2bb1389d6106__Windows-Server-2012-R2-201503.01-en.us-127GB.vhd"
New-AzureQuickVM
-Windows-ImageName$imagename-InstanceSizeExtraSmall-Location$location-Password'myâssword'-NamesieracDevOps-ServiceName'sieracDevOpsPro'-AdminUsername'myuser' -
Export error. Please help
Hi ALL,
When i try to export the database i am getting the following error. Please help
C:\>exp cas/compass@prd_test file='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.dmp' log='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.log'
Export: Release 10.2.0.1.0 - Production on Wed Feb 3 06:04:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully
The version of the db and export utility is same as u see from below.
C:\>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 3 06:06:35 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
Regards
Arun KumarOne of the most common causes of these errors is that you are using a higher version of the export utility compared to your RDBMS version. For instance, you might be using the Oracle 10.2.0 exp utility against an Oracle 9.2.0 database. Use the 9.2.0 exp utility instead. Metalink Note 132904.1 discusses the compatibility matrix between exp and database versions.
-
My ADE is having an activation server error. Please help.
My ADE is having an activation server error. Please help.
If due to some reason, you are unable to deauthorize ADE, follow the below steps:
Note: Try these steps only if you remember the password so that you can authorize ADE again
1.Go-> Go to folder.
Go to folder dialog will appear.
2. Type ~/Library/Application Support/Adobe/Digital Editions
drag the activation.dat file to the trash.
ADE will be deauthorized now.
Now Authorize ADE again. -
Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.
Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now. -
It says "error 7, windows error 127" Please help
It says "error 7, windows error 127" Please help
I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!
Maybe you are looking for
-
Assigning a hex value to a variable and getting binary value of a variable.
I try to develop java programs and I need to do a conversion unicode to EBCDIC and vice versa. How can I assign hex values to variables to build UTF-EBCDIC and EBCDIC-UTF table and get hex or binary value of data to compare it to value of in the tabl
-
Can you download Adobe photoshop CS6 without DVD?
I dont have a DVD drive on my Mac, I received an Adobe photoshop CS6 from school and need to install it by Friday.. Help! I have the PIN number. Thanks
-
IPhoto/iPod and Syncing Albums
Using OS X.3.9 and iPhoto 6.x: When I sync iPhoto with my new iPod (video), will I be able to browse the photos on the iPod by the same Album names used in iPhoto? Will the iPod list my Albums? For example, can I present a slideshow of a certain Albu
-
Cannot find the file MsDtsSrvr.ini.xml
My SSIS 2008 book says that - The MSDTSServer100 service is configured through an XML file that is located by default in the following path: C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml. I cannot find this file in the given
-
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem. Well that is the message i get. I can still use firefox(version3.6.8)