Data replication monitoring on MDG flex mode objects with Information Steward

Hi,
I am exploring different options available to setup data replication monitors on SAP MDG custom objects(flex mode). Basically my requirement is to setup rules in SAP Information steward which identifies if there are any missing records or mismatch between the data in MDG system and the replicated systems.
The challenge I am facing is that the tables generated by MDG framework for flex mode are not consistent and they keep changing if we change some key information in the MDG data model. Also the generated tables are not the same in each environment (like development, quality, production). Appreciate if anybody can provide suggestions on handling the MDG generated tables in SAP Information Steward.
Thanks in Advance.
Goutham

Hi Abdullah,
Thanks for your reply. I cannot write any ABAP code in Information Steward. As you mentioned I can always use MDG API to pull the active data from MDG but here I can only give the table names.
The other option as you mentioned, using DRF I can replicate the data in flat files to Information steward, but it is not making sense as I am validating with replicated data and not with actual data available in MDG. Other point is I don't think it is a good idea to replicate all the records periodically.
Thanks and Regards
Goutham

Similar Messages

  • Iphone apps using flex remote objects with CF???

    I am used to making web applications that use flex remote objects to interact with CF.
    Is it possible to use remoting from an iphone app cross compiled using flash builder to interact with Cf remoting on a remote server?

    Interseting, config files always seem to me like a strange way to do things.
    I'm not exactly sure what you mean by this, but by default, that's how remoting works in Flex - you have channels and destinations defined on your server, and your compiler points to your config files and reads those values. So it's a little extra work to define them in AS instead.
    Can you give me any tips on authenticating requests to cfc's from mobiles and how to protect my servers once I exposes cfc's to apps not hosted on the same server as CF?
    There isn't really anything mobile-specific you need to do here. Exposing CFCs isn't any different than exposing CFM files that are accessed via a browser. You can use the standard CF session management and CF authentication (cflogin) - there are some examples available by Googling "coldfusion cflogin flex remoting".
    Dave Watts, CTO, Fig Leaf Software

  • Mac Mini (late 2012) ram upgrade: 8gb dual channel vs 10gb? Flex Mode?

    I attempted to upgrade my Mac Mini (late 2012) from the stock 4gb of ram to 8gb. However, I messed up and didn't pay attention when buying the ram online and ordered 1x8gb stick rather than 2x4. Will losing dual channel with a 2/8 combo (10gb) make a difference that I will notice? Will having the additional 2gb make up for any lost performance? And finally, is flex mode available with the Mac Mini so that I'd still be running 4gb at dual channel and 6gb single?
    The 8gb stick arrived and I'd like to install it but Ill send it back and get the 2x4 depending on what I hear back.
    Thanks
    Ryan

    to the best of my knowledge, when upgrading your Mac mini's RAM, you must upgrade it with 2 SODIMM's at a time. When I bought my Mac mini Late 2012 model it had all the base level specs. Pretty soon the stock 4GB (2x 2GB) just wasn't fast enough. I bought a Crucial 16GB upgrade from Amazon (2x 8GB) and now my Mini is much faster especially when I am using Photoshop.
    Only thing I would do next is trying to swap the boot HD to a SSD, but am unsure as my Mac mini late 2012 is under AppleCare through December 2015 and I do not know if it would void the warranty.

  • MDG-F 7.0 Data Replication using SOA

    Hello, 
    There has been a kind of issue since MDG-F 7.0 is started. The issue is related to data replication results. Once master record data are successfully replicated over into ECC SAP 6.0, ECC is not sending anythhing back in to MDG-F for status update. We intended to put some custom development work done to fill the gap using email notification but we don't have a clear picture of what needs to be done.
    Requirement is that once master data is successfully or unsuccessfully updated in ECC, we want MDG-F to generate an email notiication to tell the requester of what happens and we want the status to be updated by master record 1, 2, 3.. by change request 1, 2, 3, by Edition.
    Any thought?
    Thanks,
    LUO

    Hello Luo
    You can configure the custom email notification after successful update of master data in ECC.
    MDG-M: How To Send an Email Notification to the Requestor at Time of Material Activation
    Another way out is - since you are using SOA, you can send the message back to receiver system. Check with your PI consultant. You can configure the messages after successful data update.
    Kiran

  • MDG-F 7.0 future planned data replication

    Hello,
    From what I have learned, valid from date in Edition can be used to control of timing of the data replication. In my data prototype in MDG-F 7.0, it is clear that GL change request will go with that. In other words, if the valid from date =August 1, 2014 (today=07/15/2014), GL change request won't come into ECC until August 1 2014 is arrived. it is behaved this way regardless of the choise of replication timing I have made.
    Will the same behavior occur to cost center change request and profit center change request?
    Thanks,
    Luo

    Hello Luo
    Yes you can do that but the real problem I faced is that in the edition screen you get the list of all the editions. Users get confused with this.
    Best way is to connect your DEV / Quality systems with resp MDG Dev and Quality. Use automatic replication. Perform the testings in each system. Once you get the approval you can create master data in production a day before go-live. This is working well till now in my case.
    Kiran

  • MDG - Data Replication to Legacy and ECC

    Hello All,
    We are implementing MDG-M on a separate hub. Data Model is extended to support both ECC and Legacy system.
    Material Master Replication has two scenarios based on the two different CR types. Requester will decide whether or not material is required for the Legacy System.
    CR #1 Materials will only be replicated to ECC: It will be peer-to-peer.
    CR #2 Materials will be replicated to ECC and Legacy:
    ECC replication will be peer-to-peer. Only SAP relevant content will be replicated.
    However, Legacy replication has to be via SAP PI. Some of the SAP fields such as Material Number, Lab Office will be mapped to Legacy Fields. There are also some custom fields which will be only replicated to Legacy System.
    I appreciate if you can help me to figure out how to setup the Replication Model.
    Thanks,
    Hakan

    Hi Hakan
    Defining filters: Use transaction DRFF
    Apart from that, I have these links:
    MDG EhP6 Learning Map : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000743543&
    => Master Data Governance
    => Overview: Master Data Replication in MDG for EhP6
    => Set Up, Implementation & Extensibility: Setting-up and Operating the Replication of Master Data
    SDN - MDG Extensibility Center: http://scn.sap.com/docs/DOC-7858?rid=/webcontent/uuid/f0801486-9562-2e10-54b1-9c123497f1a7
    Regards, Ingo

  • Data Replication Basics missing

    Hi Experts,
    Im on MDG 6.1.
    when i go through the blogs and forums i understood that data replication can be configured by
    Step 1)
    Perform ALE settings.
    step 2)
    in DRFIMG
    - define o/b implementation
    -define replication model (attach the o/b implementation here)
    step 3)
    in MDGIMG
    -when you define business activity you mention the o/b implementation that you created above under "BOType" column.
    is this all or did i miss anything else?
    i have read in a forum that you also need to mention in BRF+ ->NON user agent step->Pattern 04 -> Data Replication.
    does this mean if i dont mention this step in BRF+ the replication will not work??
    by doing all the above does a create and a change will be replicated as and when they are occured?
    Are these the same steps to execute replication for all reuse objects or do they differ?
    Please help.
    Regards
    Eva

    While configuring Data replication, Can i know in what cases we should use BRF+ -> Pattern 04 -> Data Replication(Non User Agent Step) and in what cases we should not use this???
    From the previous post i understood that Data replication works "without" a non user agent step in BRF+ (Pattern 04 -> Data Replication).
    i.e Approvals->Activation->Complete ->Triggers Data replication automatically??
    Please, Can any expert answer my two questions above.
    Regards
    Eva

  • Connecting VGA monitor to IdeaPad flex 15

    I have connected an external VGA Monitor through the HDMI port (using an HDMI to VGA converter) but the computer won't recognize the monitor. I have tried re-starting the computer, then changing the configuration using (Win+P) to extend or duplicate but it doesn't display the image on the monitor. Could someone tell me what I'm doing wrong?

    What is the make of the HDMI -> VGA adapter? I have this one: http://store.apple.com/ca/product/H9139VC/A/kanex-atv-pro-hdmi-to-vga-adapter-with-audio-support and will test to make sure the Flex 15 works with it.
    *EDIT*
    Plugged into my VGA projector, worked right away. Looks like, at first, the Flex 15 defaults to clone mode. You can switch these modes using Fn + F10, which might explain why it's not showing up.
    ←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
    Tap that kudos button if I helped ^^
    ←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗

  • First Hit Session Data Replication

    We are using WLS 5.1 with sp3 in a cluster of three
              servers using in-memory-rep, JSP, and Apache as our proxy.
              Session data replication between a primary and secondary server
              seems to work fine except in the following case:
              1) Make first hit to the cluster. During the JSP processing of
              that hit set some HTTP session data via setAttribute().
              2) Kill-off the primary server (the one that handled the first hit).
              3)Make a second hit to the cluster, it is handled by another
              server (the secondary), the session is recognized as an ongoing
              session however the session data that was set during the first hit is not
              present in the second hit.
              If we make two hits to the first server and set data, then kill-off
              the primary server, the secondary has the data at the third hit. The
              only issue seems to be when the primary is killed after the first hit.
              Anyone have any ideas?
              Thanks,
              -darren
              

    You can configure ClusterServlet in your web server farm (WLAS as web
              servers) to proxy JSP and servlet requests to the WLAS farm (WLAS processing
              your JSP and servlet).
              Set up in-memory replication in your WLAS farm. Session in JSP will be
              replicated.
              Cheers - Wei
              Yen Liu <[email protected]> wrote in message
              news:[email protected]...
              > Hello,
              >
              > I read breifly the section on BEA's online documentation talking about
              in-memory
              > replication and clustering.
              >
              > In it, it mentioned the ClusterServlet and configuring the
              weblogic.properties
              > file to assign servlets to the ClusterServlet so that sessions will be
              handled
              > correctly and all.
              >
              > My question is, "what about JSP" I am using a lot of JSP pages which sets
              > session parameters for the specific user into session objects.
              >
              > Any tips, recommendations will be most helpful.
              >
              > Thanks,
              >
              > Yen Liu
              > 510/870-1169
              >
              > Prasad Peddada wrote:
              >
              > > Darren,
              > >
              > > It shouldn't be the case. After your first hit, when you kill the
              primary
              > > server, when you make your next request you should find all the info in
              the
              > > session. I will post again, if we find the same problem on monday in our
              test
              > > environment.
              > >
              > > Thanks
              > >
              > > Prasad
              > >
              > > Darren Kessler wrote:
              > >
              > > > We are using WLS 5.1 with sp3 in a cluster of three
              > > > servers using in-memory-rep, JSP, and Apache as our proxy.
              > > > Session data replication between a primary and secondary server
              > > > seems to work fine except in the following case:
              > > >
              > > > 1) Make first hit to the cluster. During the JSP processing of
              > > > that hit set some HTTP session data via setAttribute().
              > > > 2) Kill-off the primary server (the one that handled the first hit).
              > > > 3)Make a second hit to the cluster, it is handled by another
              > > > server (the secondary), the session is recognized as an ongoing
              > > > session however the session data that was set during the first hit is
              not
              > > > present in the second hit.
              > > >
              > > > If we make two hits to the first server and set data, then kill-off
              > > > the primary server, the secondary has the data at the third hit. The
              > > > only issue seems to be when the primary is killed after the first hit.
              > > >
              > > > Anyone have any ideas?
              > > >
              > > > Thanks,
              > > >
              > > > -darren
              >
              

  • Data replication offline/online

    e have a java application which has to work both in off-line and
    on-line mode.The application is in two tier architecture and the
    environment is : Forte(IDE),JVM 1.3.0 Hotspot,JDO,pointbase
    embedded for offline mode and oracle 8.1.7 for on line mode
    (behind a firewall).The user can choose to work in offline mode
    and the data has to be moved/replicated to the online DB as soon
    as the user connects with the server in online mode next time.
    We have the following problems.
    1)The replication of data from offline to online is not working-
    mainly due to firwall.We cannot have a workaround by allowing
    all users thro'firewall.
    2)Forte /JDO do not support oracle lite(in place of point
    base).We are not able to convert the persistent classes to jar.
    3) Switching over to 3 tier architecture/ JDBC(replacing JDO)
    may solve some problem but involves lot of effort.
    -Is there any other suitable database?
    -Is there any other method to overcome this problem?

    What do you mean by 'Online Data replication'? Do you mean the Oracle Advanced Replication or do you mean the Oracle Dataguard?
    Oracle Data Guard Concepts and Administration
    Release 2 (9.2)
    Part Number A96653-02
    Oracle9i Advanced Replication
    Release 2 (9.2)
    Part Number A96567-01
    ~ Madrid

  • SQL Server Replication Monitoring

    I wanted to enable SQL server Replication monitoring 
    I checked online and found 
    http://blogs.catapultsystems.com/cfuller/archive/2010/11/10/enabling-sql-replication-monitoring-%E2%80%93-what-to-expect-in-the-replication-views-in-opsmgr.aspx
    After i setup monitoring by enabling the discover by overrides the Distributor state became healthy and being monitored. However  it shows Not Monitored state for Publication, Publisher and subscriber state
    do i have to configure something else as well

    If the discovery jobs are enabled they should appear as monitored.
    Could be that the discovery did not yet fully run.
    I would:
    Review the health explorer for the systems
    Review the discovery status
    Another view on the subject:
    http://www.sqlmag.com/article/monitoring-and-analysis/monitor-sql-server-2008-with-opsmgr
    After reviewing the management pack guide here:
    http://www.microsoft.com/en-us/download/details.aspx?id=10631
    It is stating on page 51 you need to enable the discovery for the different objects seperately. So maybe check into that as well...
    It's doing common things uncommonly well that brings succes.

  • Technical master data replication error

    Dear Experts,
    I am facing a problem with the TECHNICAL MASTER DATA replication from ISU TO CRM, Problem is I have completed the initial load  of the TECHNICAL MASTER DATA load is sucessfull issue is when i am creating the NEW TECHNICAL MASTER DATA like connection object and premise they are not moving to CRM immediately every time i am doing the request load or initial load by putting the filters could you please tell me how to solve this issue.
    Thanks & Regards
    Boyz

    Hi,
    Sometimes, the data can get stuck in the queues. So you need to check on it as well.
    After creating the technical master data, please check whether it exist in ISU system.
    Then you can check the SMQ1(Outbound queue) in ISU.
    Then you can check the SMQ2 (Inbound queue) in CRM.
    Also in Tcode SMW01 ( BDoc message) in CRM.

  • SCOM 2012 sp1 AD Replication monitoring.

    Hello! How to add obects (domain controllers) for wathcing data from this monitors (Replication monitoring)? Thank you!

    Hi
    As far I can tell from your screenshot, you are looking to get data for the replication Performance views. There is a detailed step by step guide in the Active Directory management pack guide
    http://www.microsoft.com/en-us/download/details.aspx?id=21357 on page 23. It is an optional configuration. Follow the MP guide...
    Cheers,
    Stefan
    Blog: http://blog.scomfaq.ch

  • Site Data Replication failed

    Hello All,
    In our SCCM 2012 Site data replication is getting failed.
    from rcmctrl.log there are no errors found in the ReplicationLinkAnalysis.log below error is there, please help me.
    our hierarchy CAS and 3 primary sites.
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Retrieving Rule object(s): IsQueueDisabled from rule object collection.
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Retrieving Rule object(s): IsQueueDisabled from rule object collection.
    6/25/2014 10:06:32 AM: ReplicationLinkAnalysis Information: 1 : Enumerating failed rules list.
    6/25/2014 10:06:32 AM: ReplicationLinkAnalysis Error: 1 : Value cannot be null.
    6/25/2014 10:06:32 AM: ReplicationLinkAnalysis Error: 1 : System.ArgumentNullException: Value cannot be null.
    Prashanth Kumar System Center Administrator

    Thanks a lot, linkanalyzer.log has more error please find the below.
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has 1 dependent rule(s)
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Retrieving Rule object(s): CheckFailedLinks from rule object collection.
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has only one dependent. Adding Dependency Rule: CheckFailedLinks DependsOn Rule: IsSiteActive
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Current Rule: CheckFailedLinks has only one dependent. Adding Dependency Rule: CheckFailedLinks DependsOn Rule: IsSiteActive
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Current Rule: IsQueueDisabled has 1 dependent rule(s)
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Retrieving Rule object(s): IsQueueDisabled from rule object collection.
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Retrieving Dependent Rule object(s): IsSiteActive from rule object collection.
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Current Rule: IsQueueDisabled has only one dependent. Adding Dependency Rule: IsQueueDisabled DependsOn Rule: IsSiteActive
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Current Rule: IsQueueDisabled has only one dependent. Adding Dependency Rule: IsQueueDisabled DependsOn Rule: IsSiteActive
    6/25/2014 10:06:31 AM: ReplicationLinkAnalysis Information: 1 : Skipping previously failed rule: IsSiteActive
    no errors in replmgr.log
    Prashanth Kumar System Center Administrator

  • Common issues in data load monitoring...

    Hi all,
    Can u please tell me what are the common issues that occur during data load monitoring and how to rectify them??

    This is a bit dependent on your system and landscape. but to mention some of issues:
    - Deadlock in cube because the inxedes were not dropped before loading data into cube
    - Unallowed signs in master data prevent system from creating SID
    - Duplicate values in master data load (can be avoided by setting a flag in DTP)
    - Loading delta package without having intitialized before
    - Source package delivers key figure without units (this happens when laoding into a cube or an DSO with SID generation)
    - Missing replication of data source after transporting data source in source system
    Regards
    Aban

Maybe you are looking for