Data Retries on Client details
Good Afternoon,
I was looking at a client detail on some of our Flex Connect AP's and in some instances I see a high number of Data Retries. Any indicitation as to what is causing this? Is it of any concern?
You can also configure the Data retries from radio setting , here it is :
Configuring the Maximum Data Retries
The maximum data retries setting determines the number of attempts the access point/bridge makes to send a packet before giving up and dropping the packet.
The default setting is 32. Beginning in privileged EXEC mode, follow these steps to configure the maximum data retries:
Command Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface dot11radio 0
Enter interface configuration mode for the radio interface.
Step 3
packet retries value | drop-packet
Set the maximum data retries. Enter a setting from 1 to 128.
Use the drop-packet command to maintain association and drop the packets when the maximum retry value is reached.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Use the no form of the command to reset the setting to defaults.
Hope it helps Keep rating helpful threads
Similar Messages
-
Seeing some clients getting Data Retries, others getting RTS Retries, and others getting no errors under the client stats. Could any of these retries be due to issues on the wireless adapter for the client itself? Is there some documentation someone can point me to that talks about client errors in detail?
You can also configure the Data retries from radio setting , here it is :
Configuring the Maximum Data Retries
The maximum data retries setting determines the number of attempts the access point/bridge makes to send a packet before giving up and dropping the packet.
The default setting is 32. Beginning in privileged EXEC mode, follow these steps to configure the maximum data retries:
Command Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
interface dot11radio 0
Enter interface configuration mode for the radio interface.
Step 3
packet retries value | drop-packet
Set the maximum data retries. Enter a setting from 1 to 128.
Use the drop-packet command to maintain association and drop the packets when the maximum retry value is reached.
Step 4
end
Return to privileged EXEC mode.
Step 5
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Use the no form of the command to reset the setting to defaults.
Hope it helps Keep rating helpful threads -
For existing data in BI, client need to take a call to park the same from s
hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks®urds
sivajihi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank -
Data Protection Manager Client
Hello collegues,
is there an option to install Data Protection Manager Client (not the agent itself) for DPM 2012/2012 R2? We need an option for clients to backup/restore their's data on demand with GUI interface. I saw such an application in DPM 2010, but can't
see it in 2012 options fo installation.
RegardsHi,
Please see the below links that may assist you.
https://technet.microsoft.com/en-us/library/jj628055.aspx
Note if needed:
The administrator of a client computer must set the name of non-admin users who have to have permissions to perform end-user recovery of protected data of a client computer. You only need to add the registry entries on
the client machines same as on DPM 2010. The DPM 2012 DPMRA Agent should still honor the keys.
To do this, the administrator must add the following registry key and value for each of these non-admin users. This is single key that contains a comma-separated
list of client users. You do not have to add this key separately for each non-admin user.
Registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection
REG_SZ: ClientOwners
Value: Names of non-admin users. This should be a comma-separated list of user names without any leading or trailing spaces, as in the following example: domain1\user1,domain1\user2,domain1\user3 (and so on)
Following blog provides detailed steps to configure DPM recovery permissions for users that are not members of the local administrators
group:
http://blogs.technet.com/b/dpm/archive/2011/05/10/how-to-configure-the-dpm-client-to-allow-non-admin-users-to-perform-end-user-recovery-of-dpm-protected-data.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to
other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights." -
How can I transport data from one client to another client?
How can I transport data from one client to another client?
Regards,
Subhohmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2. -
How to transfer data from one client to another client
Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay KumarHi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat -
Error while fetching data from OWB Client using External Table.
Dear All,
I am using Oracle Warehouse Builder 11g & Oracle 10gR2 as repository database on Windows 2000 Server.
I facing some issue in fetching data from a Flat File using external table from OWB Client.
I have perform all the steps without any error but when I try to view the data, I got the following error.
======================================
RA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file expense_categories.csv in SOURCE_LOCATION not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
java.sql.SQLException: ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file expense_categories.csv in SOURCE_LOCATION not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:774)
at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:849)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1377)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:386)
at oracle.wh.ui.owbcommon.QueryResult.<init>(QueryResult.java:18)
at oracle.wh.ui.owbcommon.dataviewer.relational.OracleQueryResult.<init>(OracleDVTableModel.java:48)
at oracle.wh.ui.owbcommon.dataviewer.relational.OracleDVTableModel.doFetch(OracleDVTableModel.java:20)
at oracle.wh.ui.owbcommon.dataviewer.RDVTableModel.fetch(RDVTableModel.java:46)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerPanel$1.actionPerformed(BaseDataViewerPanel.java:218)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.AbstractButton.doClick(AbstractButton.java:282)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerPanel.executeQuery(BaseDataViewerPanel.java:493)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerEditor.init(BaseDataViewerEditor.java:116)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerEditor.<init>(BaseDataViewerEditor.java:58)
at oracle.wh.ui.owbcommon.dataviewer.relational.DataViewerEditor.<init>(DataViewerEditor.java:16)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1412)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1349)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1367)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:869)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:856)
at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
===========================
In the error it is showing that file expense_categories.csv in SOURCE_LOCATION not found but I am 100% sure that file is very much there.
Is anybody face the same issue?
Do we need to configure something before loading data from a flat file from OWB Client?
Any help would higly appreciable.
Regards,
Manmohan SharmaHi Detlef / Gowtham,
Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
One way I have achieved as suggested by you
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copy all flat files on OWB Server
5) Updated the location which I created at the client.
Other way
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
Hence my problem solved.
Thanks a lot.
Regards,
Manmohan -
Insert record via data tab of table detail display
I am using SQL Developer 3.0.04
When I tries to insert more than 200 rows into a table via data tab of table detail display, it takes more than 8 minutes. It takes more than 19 minutes for 400+ rows. It is slow and it is not so slow in previous version (e.g. 1.5.4)
Had anyone experienced the same issue and is there any workaround (other than loading data via SQL loader and stop using SQL Developer)?
[Timer of SQL Developer 3.0| http://i.imgur.com/KVAdI.png]I've seen this also sometimes but i rarely load large amount of data using SQLDeveloper anyway.
Please make sure you have patch1 installed and provide information on the database used.
You can check if patch1 is installed at the
Help -> About -> Extensionyou should find a "SQL Developer Patch" entry there. -
Saving data in a database and publishing data to multiple clients
Hi there. I'm using a bunch of Compact FieldPoint modules to read out a few hundred voltages, temperatures, currents, etc. I acquire this data at about 1 Hz (pretty slow). I would like to record this data to some sort of database on a cpu (running LV 8.0, connected to the FieldPoint mods), and serve the data to multiple (between 10 and 50) clients over the net, each running a compiled stand-alone "data grabber and viewer" application (which I'll have to write of course). I'd like these external clients to basically be able to pick a certain variable from the database, and plot it for the last week (or something like that). Presumably the standalone client would send some database query to the server. The server would then send the data to the client, and the standalone client would receive the data and plot it as the user sees fit. My question is how to implement this database? Should I use the LabView "Database" Add-On to create a database to store the data? Is it better to just store the data as binary and write my own data fetching routine to handle queries? How can I write this database to disk for permanent storage? Could this database be accessible outside of LabView?
Any help on this would be appreciated. Thanks!
Jesse Wodin
Post Doctoral Researcher
Stanford Linear Accelerator Center
650-504-2512Hi Jesse,
The Citadel database is not a relational database. It's highly optimized for storing lower-rate (non-waveform) channel-by-channel, or "trace" measurement data. Another option you can consider is using DSC and Citadel on the server then writing a utility to export the data from Citdael to an SQL database. --That would solve the problem of having to write a logger application from scratch. You would only have to write the relatively simple application to export the data from Citadel and import it into a relational database.
You could accomplish this two ways. First, DSC includes a set of VIs that will retrieve historical data from Ciatdel. You could use LabVIEW to parse this data and write it to a table in a relational database. Second, Citadel actually includes a locally accessible ODBC interface. (You can query Citadel using an SQL query from the local computer). You could query Citadel using this interface, then write the result to a table in a relational database.
To view Citadel in its native format or query a Citadel database using ODBC from a remote comptuer that comptuer would need to have a licensed DSC RTS installed.
~~ -
GRC 10.0 Access Request Creation- Data Source of User Details
Hi Experts,
I was doing GRC 10.0 Configuration and found a query which I am not able to resolve.
While creation of any kind of Access Request in GRC through NWBC> Acces Management Tab>Access Request>Access Request Creation.
In the user details section, I can see the HR records( like Pernr, position, manager) have been visible to some extent.
My question is where from these details came in GRC. What configuration we should maintain to achieve these HR records?
Hope to get a quick response as this is one of the requirement of the implementation which I am doing with my customer.
Thanks,
AtanuAlessandro,
Thanks for your response. It helped me to know certain things.
But when I am navigating to SPRO > GRC > Access Control > Maintain Data Sources Configuration > [User Detail Data Source], it is configured with a ECC system in target connector and User data type is maintained as "SU01".
Now my question is where from in my case the GRC is pulling the HR records (PA20) like PERNR, POSITION,PERSONEL AREA etc? SU01 does not provide these information. My ECC box is integrated with HR module, so is it taking the data from HR directly?
Thanks in advance!
Atanu -
How do I link a Spry data set with a detail region to a html web site?
I have created a spry data set with a detail region. It works well. However, I would like to have a link from the detail region to another html web site. Can anyone help with the code? Below is the spry data set.
<?xml version="1.0" encoding="utf-8"?>
<books>
<book>
<title>The Advnentures of Crunchy and Munchy Squirrel: Field Nuts</title>
<author>Levester Williams</author>
<image>images/portfolio/tn_adventuresOfCrunchyAndMunchySquirrel.jpg</image>
<description>This delightful book for young readers teaches the importance of obedience and always doing what you know is right.</description> I
<weblink >www.crunchyandmunchy.com</weblink>
</book>
<book>
<title>More Dirty Little Secrets</title>
<author> Dr. Claud Anderson and Brant Anderson</author>
<image>images/portfolio/tn_moreDirtyLittleSecrets.jpg</image>
<description>In More Dirty Little Secrets, Dr. Claud Anderson and his son Brant Anderson, piece together little known facts about Black people, thier achievements, influence, involvement, tribulations and present them with wit and humor.</description>
<weblink>http://powernomics.com/</weblink>
</book>
</books>Hi,
In your html page, use the following notation:
<a href="http://{weblink}" title="{weblink}" target="_blank">{weblink}</a>
I hope this helps.
Ben -
Query regarding transport of customizing data to another client
I have some queries related to transport of workbench and Customizing data to another client. As I am new to SDN forum, I am not sure if this is the right forum to post my query. Kindly let me know.
Frankly, I wasn't even aware of the "Software Logistics" subforum for Netweaver. It is not frequented much, but seems to be the perfect home for questions about the CTS (that are not related to ABAP development at the same time, e.g. object dependencies).
So, thank you too
Thomas -
Post-query trigger order for data blocks in master detail relationship
Using Forms [32 Bit] Version 10.1.2.2.0 (Production) Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production.
I have the following problem with a form I am working on. It has a master data block with multiple detail data blocks. I am trying to create a post-query trigger on one of these detail blocks that will do a select using the value of a field from another of the detail blocks.
The problem is that the post-query trigger of the data block I am trying to do the select with is firing before the post-query trigger of the block I need the value from is firing. I tested by just putting in a display message and having it return the value of the id I am tryign to use. Right after I do a query on the form, I get the messages saying:
"Error: cannot find price for id:" and there is no id, and then the message from the other datablocks post-query saying, "id is: 123"
Is there a way to change the order that the datablocks are queried? Or should I be using a different trigger to do this?Do you mean as it is displayed in the object navigator? It's not the first block under the data block section, but it is above the other block that is exceuting before it, so I assumed the order in that did not matter.
EDIT: Thanks Magoo! That solved the issue.
Edited by: a small rabbit on Sep 4, 2009 11:28 AM -
How to know date format of client in webservices
I have made a webservice which takes Date from the client. But these clients can have there own regional settings like DD/MM/YYYY or MM/DD/YYYY or YYYY/MM/DD.
It would be helpful if someone can tell me how to know the date format of the client in server for a webservice
regards,
SaurabhIf a service recieves messages with values that are typed in WSDL as wxs:dateTime or a restriction thereof, then the data is fixed in its format to ISO 8601, and has nothing to do with the localisation settings of the client machine.
The question 'does typing a value as xsd:dateTime in WSDL fix the format' and the question 'how can a server know the regional settings of a client' are not the same question. AFAIK, the majority of public web services do not use WSDL nor WXS.
Pete -
How to know date format of client
I have made a webservice which takes Date from the client. But these clients can have there own regional settings like DD/MM/YYYY or MM/DD/YYYY or YYYY/MM/DD.
It would be helpful if someone can tell me how to know the date format of the client in server for a webservice
regards,
SaurabhIf a service recieves messages with values that are typed in WSDL as wxs:dateTime or a restriction thereof, then the data is fixed in its format to ISO 8601, and has nothing to do with the localisation settings of the client machine.
The question 'does typing a value as xsd:dateTime in WSDL fix the format' and the question 'how can a server know the regional settings of a client' are not the same question. AFAIK, the majority of public web services do not use WSDL nor WXS.
Pete
Maybe you are looking for
-
Need to create and adjustment layer to compensate for undesirable hue caused by lens
I'm looking for some help to set up an adjustment layer to compensate for a specific lens colouration issue. Basically I'm using a GoPro (on a drone) but I have fitted an aftermarket flat lens. Sharpness is good, but the lens has a well known issue –
-
Received my new 2.8 GHz MacBook Pro (mid 2014). Had a 2.3 GHz (early 2011) MBPro. Note: both have 16 GB RAM running OS X Mavericks 10.9.4. Nothing drastic in the looks department until you look close. This post, isn't about esthetics (which are gr
-
Well i use lubuntu 14.04 and i've realized that the html5 player on youtube works so much better than the flash player, but i can't use it by default, for play videos i have to request the html5 player, and the problem is when i restart the browser o
-
Time Capsule assigns wrong IP to Macbook Pro upon wake
Hi, This is driving me nuts, I hope someone can help. First off: I have latest OS 10.5.7, Airport, and Time Capsule updates available today. This problem has been occurring since before 10.5.7 came along, and before the last Time Capsule firmware upd
-
Illustrator 8 on Vista-64 so I can install upgrade to CS2
I have already installed Photoshop PS2 on this Vista-64 system - no problem, have been using it for months. I seldom use Illustrator but now need to install so I can work with customer file. Won't install, installer exe doesn't even load. Note: Ot