Data retrieval from structure

Hi all,
Can anyone tell me how to retrieve the data from structure called RS45V, the field is kwmeng(Quantity) .
The problem is while i am retriving the kwmeng field from RS45V, it is showing that it is not a table.
Thanks in advance.
Venkat

Hi Venkat
Goto SE12 and give the data element name of the field kwmeng of structure RS45V.
In the date element display screen, check the where-used-list to find list of the tables in which the data-element is used to store the data.
Choose the right table from the list.
Hope this helps!
Best regards,
Thangesh

Similar Messages

Tell me how to format a date retrieved from a MS SQL Server 2000 database?

Tell me how to format a date retrieved from an MS SQL Server 2000 database for various uses in my JSP page?

Or if you want to use JSTL instead of a scriptlet see:
http://forum.java.sun.com/thread.jspa?threadID=676754&tstart=0

Can I use stored procedures to improve data retrieval from the database?

I have been requested to get multiple pieces of data from multiple tables and return the output in an array for use in a Java program.
Eliminating multiple calls to the database. Currently, the data is retrieved from the database in multiple steps but to eliminate
possible bottlenecks in the future, I created several complex sql statements.
For instance,
In the first table there are 20 columns of data. has a column named type which can have the one of these values: line, inn, or bsc
In the second table there are 6 columns of data. has the additional data for type line
In the third table there are 7 columns of data. has the additional data for type inn
In the fourth table there are 2 columns of data. has data regardless of type
etc...
Depending on a specific column value retrieved (inn) from the first table:
I need to collect all 20 columns in the first table and get all the columns in third table and the columns in the fourth table, etc.
Question: How can I remove the duplicate primary key columns without specifying for each table the column names to be returned?
I used the wildcard SELECT * because I didn't want to have to update the retrieval methods if additional columns are added to these
secondary tables.
example of my sql for type inn data:
select * from first_table f, third_table s, fourth_table t
where (f.column1='xxxx' and f.column2='xxxx') (the 'xxxx' are passed into the sql statement)
and
((s.column1=f.column1 and s.column2=f.column2)
and
(f.column3=t.column1));
Currently, I've duplicated the separate sqls for each valid type found in the first table (at least a dozen types). The only difference is
the table name. Instead of the third table I use the second table, etc.
The MAIN Question: How can I set this up to have one sql to handle each type? I want to eliminate having over a dozen duplicated sqls. Can I
incorporate this into a stored procedure or something? If so, how? Can anyone provide sample coding?
Your help is very much appreciated. Thank you.
GD

Hi, Salah.
Use "Exec" in your query to run procedures.
SAPbobsCOM.Recordset oRS;
oRS = (SAPbobsCOM.Recordset)pCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
oRS.DoQuery ("EXEC YourStoredProcName");
Triggers are not supported in SDK.
Regards,
Aleksey

Data extraction from Structures MFHM

Hi All
I want to extract the data's from the structure MFHM on the details of Production Resource tool view of Material master
Pl suggest some means for the extraction.
Thanks

Hi,
You cannot extract data from a structure then if at all any field you require from it for that you can search where used list i.e. in which tables that field lies.
don't forget to reward the points if you feel that it is helpful to you.
Regards,
Amit.

Data extraction from Structures MPOP

Hi
I want to extract the data's from the structure MPOP on the details of Forecast view of Material master
Pl suggest some means for the extraction.
Thanks

Hi ,
There is no common means of extracting data from structure it depends on how ur ABAPer codes.
Like u can call data from structures using FM or table loops etc.
Kindly check this following FM with ur ABAPer for extracting from MPOP.
MPOP_P_ADD_REFERENCE_AFTER --- Reference Processing of Forecast Data for MPOP After Ref. Default Data
Prakash

Data Retrieval from SSRS 2008 R2 to SQL Server 2012 standard

Hello,
We have a virtual machine running SSRS 2008 R2 and a physical server running SQL server 2012 standard. We are having an issue with a report that is taking almost 10 minutes for the data to be retrieved from the sql 2012 database. We used the
execution logging query to debug and analyze. We see that it renders and processes very fast, but the data retrieval time is very slow. When the same query is run using sql studio mgr. from the SSRS server it runs just fine...it
takes seconds for the results to come up.
I don't believe there is a compatibilty issue because other reports run fine. We're just having problems with one report.

A long shot, but I've seen where the data type of a report parameter is mismatched against the data type of the table it is being compared against. SQL profiler would show this clearly.
This would explain why the query returns quickly in ssms but not with the report.

Data extraction from Structure.

Hi All,
Could you please tell the steps for extracting data from Structure.
Thanks in Advance!!

Preeti,
you can extract data from SAP by MC23. also please check these options
Steps in LIS EXTRACTION:
T.code u2013 :MC18 u2013 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 u2013 create infostructure
Example u2013
Inforstructure : S789
Application u2013 01
Choose characteristic select the catalog, select the fields, copy + close Choose key figures catalog select the key figures ,copy + close, save and generate
T.code u2013 MC24 u2013 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter Select the key figures click on rules for key figures give suggest rules, copy save and generate Click on updating (activate updating) Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period Updating u20131)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code u2013 LBW0 u2013 Connection of LIS Information structures to SAPBW Information structure : S786 Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute Select the radio button -Activate / deactivate and Execute.
T.code u2013 SBIW u2013 Display IMG (implementation guide) Setting for applications specific data source u2013 logistics u2013 Managing transfer information structure u2013 setup of statistical data u2013 applications specific setup of statistical data u2013perform statistical setup u2013 sales.
Choose activity
Setup u2013 Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code u2013 RSA3 u2013 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records Go to BW side replicate data source u2013 Assign infosource u2013 Create infocube u2013 Create update rules u2013 create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code u2013 MC25, set update (V1) or (V2) or (V3)
T.code u2013 LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side u2013 create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
Modules for LIS : SD,MM, PP,QM.
Deltas for LIS:
After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables u2018SnnnBIW1u2019, u2018SnnnBIW2u2019 and the structure u2018SnnnBIWSu2019 and the InfoStructure itself u201ASnnnu2018
The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
Extract structure u2018SnnnnBIWCu2019 is used as an interface structure between OLTP InfoStructure and BW
The OLTP system has automatically created an entry in the control table u2018TMCBIWu2019. Within transaction u2018SE16u2019 youu2019ll see, that for your particular InfoStructure the field u2018BIW activeu2019 has the value u2018Xu2019 and the field u2018BIW statusu2019 is filled with value u20181u2019 (refers to table SnnnBIW1).
The orgininal LIS update program u201ARMCX#### will be enhanced within the form routines u201Aform Snnnbiw1_update_u2026.u2018 and u201Aform Snnnbiw2_update
With the transaction u2018SE38u2019 youu2019ll see at the end of the program starting at line 870 / 1006, that the program is enhanced within a u2018BIW delta updateu2019 coding
Within the flag u201AActivate/Deactivateu2018 the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table u201ATMCBIWu2018 is defined, which table is active for delta update.
Note: The delta updating is client dependent !

Data retrieval from sad face ipod

So, two nights ago my ipod (40gig 3rd gen(? 4th? 1.5 years old; warranty expired)) randomly died while in the middle of playing music. It whirred and clicked and eventually gave me the unhappy face, and that is how it's stayed for the past 48 hours. Now, there are plenty of people in this same boat, as a little browsing of the forums has showed me, so I'm not asking for how to possibly fix it, but...
What I do want to know: is there a service to get the data off the ipod? Reformatting the machine is all fine and good, but I'm living abroad and most of my CDs are currently on the other side of the world. My friend said that you could pay $50 for Apple to retrieve the data from your old drive, but I haven't seen anything like that on the website (perhaps it is only for Macs?)
Anyway, has anyone heard of a data retrieval service for ipods, or some other method of getting data off an ipod that won't connect to the computer? (I tried putting it in data mode and it just laughed at me...or frowned, I suppose.)
Thanks for any advice you can give...
Windows XP

Is your iPod fully charged? (connect it to the Mac for 4 hours to charge the battery)
Your post is not very clear on the problem, but normally Resetting the iPod will get rid of the sad face, on the iPod sceen, but may not get rid of your unhappy face.
To Reset - Press Menu and Center Button for about 10 secs till the Apple logo comes ON.
Here is the support document that may help you.
http://support.apple.com/kb/TS1373?viewlocale=en_US
Good Luck & Have a nice day!

Data retrieval from ZL table

I need to retrieve data from ZL table and prepare a report comparing the Actual, Previous and Old records in the table for an employee for a particular period.
Are there any particular function modules for this data retrieval?
Thanks.

Hi bala,
I did not get what you were trying to tell me. I went to SE37 and tried for anything that starts with "zlit" .. but returned no results.
And also I dont want time management to payroll.
I want to retrieve data from the B2 in PCL2 cluster.
i.e I want to retrieve data from the ZL table in the cluster for a particular payperiod and particular employee.
Thanks very much in advance!

Data retrieval from JMS queue using single SOA composite in a clustered env

Hi,
I have following situation:
1) A requester SOA composite (Composite1)is reading data from a File
2) Mediator is routing data received from Composite1 and writing in a JMS queue.
3) A provider composite (Composite2) is reading from the JMS queue.
Both Composite1 and Composite2 is deployed in a clustered environment.
Problem is Composite2 is not able to read data sequentially from JMS Queue sometime (for example out of 30000 transactions its failing once). Here it's a queue and only one producer and only one consumer is there.
What may cause this issue? I thought a single producer and single consumer on a queue will guarantee FIFO retrieval . Could you please advise where may be the gap?
Thanks
Edited by: user1054373 on Sep 18, 2012 11:29 PM

Hi,
I thought a single producer and single consumer on a queue will guarantee FIFO retrieval Java Message Service Specification does not guarantee ordered message delivery when applications use distributed queues...
Using Weblogic Message Unit-of-Order may solve your issue...
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/uoo.htm#JMSPG389
Hope this helps...
Cheers,
Vlad

Saving data retrieved from text file to JDBC table

Hi,
I would like to save data, loaded from a text file to a dataset, into an existing JDBC table.
The documentation I found on this subject is very brief, and no matter how I tried, I couldn't succeed.
I would appreciate any help.
Thank you in advance

Hi there,
Here is an example of reading a String and a date from a text file. Once you have what you need in the Strings (or whatever) it should be easy to insert them into and SQL statement. Let me know if you need an example of this as well and I'll post it in the morning. Right now I'm off to bed :o)
Cheers
Mark
import java.io.*;
import java.util.*;
import java.text.*;
public class WriteTest {
public static void main(String [] arg) throws Exception {
   Date today = new Date();
   String name = "";
   SimpleDateFormat formatter = new SimpleDateFormat("ddMMyyyy");
   File myfile = new File("hello.txt");
   // how to input
   BufferedReader in = new BufferedReader(new FileReader(myfile));
   String name="",
   date="";
   boolean eof = false;
   do {
      name = in.readLine();
      date = in.readLine();
      if(!(eof = (name==null || date==null)))
      System.out.println(name+" "+formatter.parse(date));
   while(!eof);
}

Fast data retrieval from large tables

Hello,
we have created a table in oracle 10g DB. at an average there are around 20-30 rows inserted onto the table. so in 1 mnth the record count for the table is around 800-900 rows.
in one year which is becoming to 10,000 rows. so speed up data retreval from this bulk data we need suggestion. various things that come to my mind are -
Indexing of table/# Index of table/partitioning of table/materialized view etc.
but not sure what exactly needs to be done here. please suggest on how smooth data retreival can be chaived whatever be the size of the table.
Thanks,
Sam

Here is a simple look of your data progression.
year        Row
1           10,000
5           50,000
10          1,00,000
50          5,00,000
100         10,00,000You need to wait another 100 years to reach a million. And million is not a big number when it comes to Oracle.
So as others have stated what the objective behind your question?
basically the choice of Index or Partition mainly depends on how the data is going to be accessed from a table. If I am going to access all the rows of a table every time then there is no use of both the features. I would just prefer a FTS. In that situation i would be looking how to optimize my FTS.
So you need to set you objective clear before picking up the solution. Just because you have a hammer you cant go around banging the wall ;)

Data retrieval from failed ibook hard drive

my ibook G4's hard drive failed after about 18 months, which is ridiculous in itself. they tell me i have to send it off somewhere for data retrieval.
WHERE is a good place to do this? i need the data.

Hey Christopher.
Have you already removed the HD?
Do you have access to another Mac where you could try Target Disk Mode ? It may be worth a try and shouldn't cost you a thing.
If you are willing to buy some software, Alsoft's DiskWarrior has helped crack some pretty tough looking jobs.
If your drive has not completely failed either one of these may work. Target Disk Mode is worth a try as it won't cost you a thing but time.
Edit: As Ryan M said, in the future backup...backup....backup.....backup.

How to transfer data retrieved from a bean, into requestScope

I have a jsf page called viewCustomer.jsp, which is backed by a controller/mbean with a name viewCustomerController.
This page is always called via a request which carries the customer accountID in its request attributes. Hence in order to load the customer details i am using a f:view beforephase call which acts before the render phase. This retrieves a number of beans from of different types. For example, each customer can have an address.
each addressbean has an ID field which is the primary key to the addresses. If i want to delete the address, i need to send this primary key via a requestAttribute to a controller which will delete it.
hence to delete the address i have a form such as:-
<h:form>
<h:inputHidden value="#{viewCustomerController.customerAddressBean.id}" />
<h:commandButton value="Delete Address" action="#{viewCustomerController.deleteCustomerAddress}" />
</h:form>
The problem with this, is that because the addressbean is only added before the render phase, on presssing the delete address button, i get a null exception, because customerAddressBean doesnt exist yet.
What i want to do, is that upon pressing the delete address button, the id value should be immediately sent to a requestAttribute called 'addressId', and not back to the backing bean.
i. e. (if jsf had an assignment operator) it would be something like
<h:form>
<h:inputHidden value="requestScope.addressID = #{viewCustomerController.customerAddressBean.id}" />
<h:commandButton value="Delete Address" action="#{viewCustomerController.deleteCustomerAddress}" />
</h:form>
basically, the data should be read from the backing bean, but it shouldnt be written back to the backing bean.
now i realize that if i allow my database to repopulate the backing bean earlier, the customerAddressBean will be populated, and then the first listing would work. But that would require a second set of trips to the database with no meaning but to repopulate the backing bean which seems like quite a waste.
In the case of the address, i could populate the propertly with a dummy addressbean, but this would not work in the case of properties which are lists of beans.
So in summation. How do i transfer data that has been read from a property of a backing bean, into a request attribute on a commandbutton click, without putting the data back into the property of the backing bean.

Hello Anu,
There are different hardware options that you have here. The basic things that you need to keep in mind is that the PDA that you purchase runs on Pocket PC and has either a CompactFlash or a PCMCIA slot in it. The driver that you would be using for your LabVIEW PDA application would NI-DAQmx Base Ver 2.0.1. You can refer to its readme for more information on the supported hardware. Also you can check at this page for more information on the supported devices. About your original question, using LabVIEW PDA you can create a text file for storing data and separate the data points with a comma. So that this way you would be able to open the file in Excel if you wanted to. All the file I/O related VIs can be found in the function palette at Programming >> File I/O.
Regards,
Chetan K.
Application Engineer
National Instruments

Data retrieval from a loaded tree in WD ABAP

Hi All,
I have a node 'ENTRY' and have a recursive sub node called 'SUB_ENTRY' now assume that i have created a 10 level tree by creating 9 recursive nodes. Now i would like to fetch or retrieve all the data from this tree.
So can you pls tell me if there exists a method to do it in one go or will i have to use GET_TABLE_FROM_NODE for every node ..
Thanks for your help.
Regards,
Anoop

Yes Thomas you are right about the use of ByKey and NestingColumn but the thing is that as far as application development is concerned then i am done with that .. but it was to improve the performance of this application that i needed to know if i can retrieve the already available data from this tree instead of calling the FMs again which is very costly ...
anyways thanks for your response.
Regards,
Anoop

Data retrieval from structure

Similar Messages

Maybe you are looking for