Data show in E table
Hi Friends,
How can we see the data in e table ?
Thanks & Regards,
Upendra.
HELLO Upendra,
Yes, you can see the data in E table.
U can see by giving e table ( /BI0/E.. , /BIC/E...) naming IN SE11..
Hope this clears...
Best Regards,
Maruthi
Similar Messages
-
After Successfull Load ETL for General Ledger No data showing in Warehouse
After Successfull Load ETL for General Ledger No data showing in Warehouse Tables
DB Version # 11.2.0.1.0 and OS of Warehouse Microsoft Windows Server
2003 R2 Enterprise Edition Service Pack 2, v.4922
1. BI Apps version
Release 7.9.6.3
2. BI Apps module
Financials
3. Source system and version
EBS R12.1.2
Please help me out .......Hope you have done finance config as per the link
http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/toc.htm
List out the tables with row count=0, get the sql override query and execute in source to see # records for tables ending DS or FS where row count=0
do the same for tables ending with _D using warehouse db.
If fact tables are getting 0 records check the w_day_d table.
let me know updates.
If helps pls mark. -
How do I include/show data from a child table in a Modal Window?
How do I show data from a child table in a Modal Window?
I have an application where each customer might have multiple addresses and phone numbers which are stored in child tables. When I show the customer in a record on a screen I can place a Modal Window button on the screen which can be pushed at runtime
to display detail information for the particular customer parent table which works great. However, I would also like to display the data from the address and phone number child tables. Is there a way to do that? Or can I just launch a hole separate screen
which would automatically display the needed data for the particular customer? If yes, how?
Thank you for any help.I am not even sure how to describe my situation in such a way that this forum incident would be of benefit to other people as I think it is fairly unconventional.
The “add contactaddress” link does not show up on the right.
The contactaddress table is a child of the contact table.
The contact table is a child of the contactlink table.
And the contactlink table is a child of the person table.
I have it set up this way because the contact in the contact table may be a contact to multiple persons in the person table and I do not want to re-enter the contact info every time the contact is used.
In the list detail screen of the person table I can see the contactlink child collection so that I can see the name of the person in the contact table at runtime. However, the contactaddress collection is not related to the person table so it does not show
up on the right hand side of the design screen as an “add contactaddress”; nor is there “add contact” link.
What I would like to happen during runtime is that it is not necessary to switch screens from the person list detail screen to a contact list detail screen to see the addresses and phone numbers for the contact.
Is my setup unnecessarily convoluted? Is there a better way? Please see the two snapshots below.
Perhaps there is a way to call up a Detail screen from the List Detail at runtime?
Anyway, if you are still reading, thank you very much for your help.
jjjjj -
Programming insert row VO,but inner-table no data show?
We have Master-Detail-Detail ViewObject,when programming insert row three ViewObject,why inner-table UI no data show?
[Source Code ZIP files|http://docs.google.com/leaf?id=0B1l5uiKPTIr_ZTQwYTQ1MTMtZWFlMS00YWQ1LWFiZWQtYzNmODIwNDRlZWJk&hl=zh_TW]
1.SmpTest0PG.xml click button.
2.SmpTest0CO.java call MyTestAMImpl.java create Method insert row three ViewObject.
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("Test") != null)
String key = "1";
Serializable aserializable1[] = { key };
String quote_id = (String)am.invokeMethod("create", aserializable1);
if (!quote_id.equals(null))
pageContext.setForwardURL("OA.jsp?page=/smp/oracle/apps/pos/test/webui/SmpTestPG&Key="+key,
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
3.SmpTest0CO.java Forward SmpTestPG.xml.
4.SmpTestPG.xml Show Data.
MyTestAMImpl.java
public String create(String key)
int vendor_id = 0;
String vendor_name = null;
int contact_id = 0;
int site_id = 0;
String quote_id = null;
OADBTransaction trx = (OADBTransaction)((OAApplicationModuleImpl)this).getDBTransaction();
SmpPoHdVOImpl hdvo = getSmpPoHdVO();
SmpPoDlVOImpl dlvo = getSmpPoDlVO();
SmpPoDkVOImpl shvo = getSmpPoDkVO();
if (!hdvo.isPreparedForExecution())
hdvo.setWhereClause("1 = 0");
hdvo.setMaxFetchSize(0);
hdvo.executeQuery();
if (!dlvo.isPreparedForExecution())
dlvo.setWhereClause("1 = 0");
dlvo.setMaxFetchSize(0);
dlvo.executeQuery();
if (!shvo.isPreparedForExecution())
shvo.setWhereClause("1 = 0");
shvo.setMaxFetchSize(0);
shvo.executeQuery();
String s = key;
Serializable aserializable[] = { s };
SmpViewPoHdVOImpl quhdvo = getSmpViewPoHdVO();
if(quhdvo != null)
quhdvo.invokeMethod("initQuery", aserializable);
SmpViewPoDlVOImpl qudlvo = getSmpViewPoDlVO();
// insert hd
quhdvo.setRangeSize(-1);
Row quhdrow[] = quhdvo.getAllRowsInRange();
for(int i = 0; quhdrow != null && i < quhdrow.length; i++)
Row hdrow = hdvo.createRow();
hdrow.setAttribute("DocNum","200");
hdvo.insertRow(hdrow);
hdrow.setNewRowState(Row.STATUS_NEW);
quote_id = hdrow.getAttribute("HEADER_ID").toString();
// insert dl
RowIterator dlIter = (RowIterator)quhdrow.getAttribute("SmpViewPoDlVO");
dlIter.setRangeSize(-1);
Row qudlrow[] = dlIter.getAllRowsInRange();
int line_seq = 0;
for(int j = 0; qudlrow != null && j < qudlrow.length; j++)
Row dlrow = dlvo.createRow();
line_seq ++;
dlrow.setAttribute("LineNum",String.valueOf(line_seq));
dlrow.setAttribute("ItemNo",qudlrow[j].getAttribute("ItemNo"));
dlrow.setAttribute("Qty",qudlrow[j].getAttribute("Qty"));
dlvo.insertRow(dlrow);
dlrow.setNewRowState(Row.STATUS_NEW);
// insert shipment
RowIterator shipIter = (RowIterator)qudlrow[j].getAttribute("SmpViewPoDkVO");
shipIter.setRangeSize(-1);
Row shipRow[] = shipIter.getAllRowsInRange();
int ship_seq = 0;
for(int k = 0; shipRow != null && k < shipRow.length; k++)
ship_seq ++;
Row shrow = shvo.createRow();
shrow.setAttribute("ShipmentNum",String.valueOf(ship_seq));
shrow.setAttribute("Qty",shipRow[k].getAttribute("Qty"));
shvo.insertRow(shrow);
shrow.setNewRowState(Row.STATUS_NEW);
return quote_id;
Edited by: Tony_Huang on Apr 10, 2010 3:59 PMpublic class SmpTestCO extends OAControllerImpl
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean oatablebean = (OATableBean)webBean.findChildRecursive("SmpPoDlVORN");
OATableBean oatablebean1 = (OATableBean)webBean.findChildRecursive("SmpPoDkVORN");
if (oatablebean != null)
oatablebean.setAttributeValue(UIConstants.ALL_DETAILS_ENABLED_ATTR, ((Object) (Boolean.TRUE)));
oatablebean.setAttributeValue(OAWebBeanConstants.VIEW_LINK_NAME, "SmpPoDlDkVL1");
if (oatablebean1 != null)
oatablebean1.setAttributeValue(OAWebBeanConstants.VIEW_LINK_NAME, "SmpPoDlDkVL1");
oatablebean1.setInsertable(true);
oatablebean1.setAutoInsertion(true);
} -
Workflows table is not showing up in Data Manager drop down table list
Hi,
I am able to see Workflows table in Console but not able to see it Data Manager drop down table list in record mode for selection.
Even not allowed to create another workflow table.
Thanks for any tips/clue
-reoReo,
You will not be able to create another workflow table. There is only a single workflow table that will hold all the workflows you create through the Data Manager.
As Vito mentioned, please make sure to load the corresponding MDMWorkflow component on the client machines running the Data Manager that you wish to create and view workflows from.
Once the workflow component is installed you should see it as a new tab in the Data Manager. You will need Visio to create workflows.
Thanks,
Tim -
How to get the data from a cluster table to BW
Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
RajeshHI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
How to populate data in dynamic internal table
Hi Expert,
fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records. These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
...itab
01
02
03
04
05
The 5 records from qpcd is populated in another table call viqmel. I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column. The final dynamic itab will be like this
table itab
01 02 03 04 05 -
> field name
2 0 1 0 1 -
> data
my source code like below
Report ZPLYGRND2.
TABLES: mara, makt.
TYPE-POOLS: slis, sydes.
DATA:it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
types : begin of t_qpcd,
codegruppe like qpcd-codegruppe,
code like qpcd-code,
end of t_qpcd.
data:wa_qpcd type t_qpcd,
i_qpcd type standard table of t_qpcd initial size 0.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
select * into corresponding fields of wa_qpcd from qpcd
where katalogart = 'D'
and codegruppe = 'OOT01'.
append wa_qpcd to i_qpcd.
endselect.
loop at i_qpcd into wa_qpcd.
is_fcat-fieldname = wa_qpcd-code.
APPEND is_fcat TO it_fcat.
endloop.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
if sy-subrc = 0.
endif.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
LOOP AT <l_table> INTO <l_line>.
ENDLOOP.hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
also the code to populate data in dynamic table is in this code like:
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
look at the whole program .hope this solve ur problem thanks.
REPORT ZTESTA MESSAGE-ID ZIMM .
TYPES : DATA_OBJECT TYPE REF TO DATA.
DATA : MITAB TYPE REF TO DATA .
TYPE-POOLS : SLIS .
DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE .
DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
DATA : DYN_LINE TYPE DATA_OBJECT .
FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
DATA : TABLE_NAME_IS_VALID TYPE C .
DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_TABL.
PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
DATA CHECKTABLED.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_FILE.
PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_DOWN.
PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
USER-COMMAND M_UCOMM .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_CHKF.
PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_UPLD.
PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_SHOW.
PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT .
PERFORM CHECK_FILENAME .
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
IF SY-UCOMM = 'PRIN'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
PERFORM F4_FOR_FILENAME .
INITIALIZATION .
T_TABL = 'Table Name' .
T_FILE = 'File Name' .
T_DOWN = 'Download Table' .
T_CHKF = 'Check File to Upload' .
T_UPLD = 'Upload File' .
T_SHOW = 'Show Table Contents' .
START-OF-SELECTION .
PERFORM CHECK_TABLE_NAME_IS_VALID .
END-OF-SELECTION .
IF TABLE_NAME_IS_VALID EQ ' ' .
MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
ELSE .
PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
CASE BUTTONSELECTED .
WHEN P_DOWNLD .
PERFORM SELECT_AND_DOWNLOAD .
WHEN P_CHKFIL .
PERFORM CHECK_FILE_TO_UPLOAD .
WHEN P_UPLOAD .
PERFORM UPLOAD_FROM_FILE .
WHEN P_SHOW_T .
PERFORM SHOW_CONTENTS .
ENDCASE .
ENDIF .
FORM CHECK_TABLE_NAME_IS_VALID.
DATA MCOUNT TYPE I .
TABLES DD02L .
CLEAR TABLE_NAME_IS_VALID .
SELECT COUNT(*) INTO MCOUNT FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'TABL'
AND OBJ_NAME = MTABLE_N .
IF MCOUNT EQ 1 .
CLEAR DD02L .
SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
IF SY-SUBRC EQ 0.
IF DD02L-TABCLASS = 'TRANSP' .
TABLE_NAME_IS_VALID = 'X' .
ENDIF .
ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
FORM SELECT_AND_DOWNLOAD.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
MESSAGE I398(00) WITH 'Table' MTABLE_N
'successfully downloaded to '
MFILENAM .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
FORM UPLOAD_FROM_FILE.
DATA : ANS TYPE C .
DATA : LINES_OF_ITAB TYPE I .
DATA : MSY_SUBRC TYPE I .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
TEXTLINE1 = 'Are you sure you wish to upload'
TEXTLINE2 = 'data from ASCII File to DB table '
TITEL = 'Confirmation of Data Upload'
IMPORTING
ANSWER = ANS.
IF ANS = 'J' .
PERFORM CHECK_FILENAME.
CLEAR MSY_SUBRC .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
IF SY-SUBRC EQ 0.
DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
IF LINES_OF_ITAB GT 0 .
MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
ENDIF .
ENDIF.
IF MSY_SUBRC EQ 0 .
MESSAGE I398(00) WITH LINES_OF_ITAB
'Record(s) inserted in table'
MTABLE_N .
ELSE .
MESSAGE I398(00) WITH
'Errors occurred No Records inserted in table'
MTABLE_N .
ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
FORM F4_FOR_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\'
MASK = ',.,..'
MODE = '0'
IMPORTING
FILENAME = MFILENAM
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
FORM CHECK_FILENAME.
IF MFILENAM IS INITIAL
AND NOT ( MTABLE_N IS INITIAL )
AND P_SHOW_T NE BUTTONSELECTED.
CONCATENATE 'C:\'
MTABLE_N '.TXT' INTO MFILENAM.
ENDIF .
ENDFORM. " CHECK_FILENAME
FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
CLEAR DYNAMIC_IT_INSTANTIATED .
I_STRUCTURE_NAME = MTABLE_N .
CLEAR IT_FIELDCAT[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = I_STRUCTURE_NAME
CHANGING
CT_FIELDCAT = IT_FIELDCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
LOOP AT IT_FIELDCAT .
CLEAR WA_FIELDCATALOG .
MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
ENDLOOP .
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FIELDCATALOG
IMPORTING
EP_TABLE = MITAB .
ASSIGN MITAB->* TO <FS_ITAB> .
DYNAMIC_IT_INSTANTIATED = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
FORM SHOW_CONTENTS.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
FORM CHECK_FILE_TO_UPLOAD.
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Message was edited by:
SAURABH SINGH
SENIOR EXECUTIVE
SAMSUNG INDIA ELECTRONICS LTD.,NOIDA -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Not able to see data in the qualifier table of the main tbl , Data Manager
Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reoYou may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan -
How to link Excel tabs so data shows up in one report
I have a huge excel file with 16 tabs (sheets) of data. Each tab has an excel speadsheet filled. I have the data in Crystal. Each tab shows up as a separate table. I've tried to link each in different ways but can only get one table to show up in the report. I want all the data in one report. If that's possible. It would be very large.
Graham,
Thanks for answering,
Yes I have the tables and can link them (have tried a couple of different ways) One has all the data fields linked between tables and the other way was to run them in series with just one field linked. Either way the Field Explorer on the right side of the screen shows each table and each table lists all the fields. But the problem is that the report only shows data from one table, not all the tables or all the data. The data that it shows is only from the table that I selected the fields from.
Hope this makes sense. Thanks -
Problem with store ResultSet and show result in table
Hi, I'm kind of new in ADF, I need to store ResultSet and show result in table-component. I have two problems:
1) I get my ResultSet by calling callStoredProcedure(...) and this returns actually ref_cursor as ResultSet.
When I try to println() contains of this result set in this method - it works OK (commented part),
but when I want to println() somewhere else (eg. in retrieveRefCursor() method) it doesn't work.
The problem is that the scrollability of the ResultSet is lost - it becomes a TYPE_FORWARD_ONLY ResultSet.
Is there any way to store data from ref_cursor for a long time?
2) My second problem is "store any result set and show this data in table". I have tried use method storeNewResultSet() but
without result (table contains only "No rows yet" and everything seems to be OK - no exception, no warning, no error...).
I have tried to call this method with ResultSet from select on dbs (without resultSet as ref_cursor ) - no result with createRowFromResultSet(),
storeNewResultSet(), setUserDataForCollection()...
I've tried a lot of ways to do this, but it doesn't work. I really don't know how to make it so it can work.
Thanks for your help.
ADF BC, JDev 11.1.1.0
This is my code from ViewObjectImpl
package tp.model ;
import com.sun.jmx.mbeanserver.MetaData ;
import java.sql.CallableStatement ;
import java.sql.Connection ;
import java.sql.PreparedStatement ;
import java.sql.ResultSet ;
import java.sql.ResultSetMetaData ;
import java.sql.SQLException ;
import java.sql.Statement ;
import java.sql.Types ;
import oracle.jbo.JboException ;
import oracle.jbo.server.SQLBuilder ;
import oracle.jbo.server.ViewObjectImpl ;
import oracle.jbo.server.ViewRowImpl ;
import oracle.jbo.server.ViewRowSetImpl ;
import oracle.jdbc.OracleCallableStatement ;
import oracle.jdbc.OracleConnection ;
import oracle.jdbc.OracleTypes ;
public class Profiles1ViewImpl extends ViewObjectImpl {
private static final String SQL_STM = "begin Pkg_profile.get_profile_list(?,?,?,?);end;" ;
public Profiles1ViewImpl () {
/* 0. */
protected void create () {
getViewDef ().setQuery ( null ) ;
getViewDef ().setSelectClause ( null ) ;
setQuery ( null ) ;
public Connection getCurrentConnection () throws SQLException {
// Note that we never execute this statement, so no commit really happens
Connection conn = null ;
PreparedStatement st = getDBTransaction ().createPreparedStatement ( "commit" , 1 ) ;
conn = st.getConnection () ;
st.close () ;
return conn ;
/* 1. */
protected void executeQueryForCollection ( Object qc , Object[] params , int numUserParams ) {
storeNewResultSet ( qc , retrieveRefCursor ( qc , params ) ) ;
// callStoredProcedure ( qc , SQL_STM ) ;
super.executeQueryForCollection ( qc , params , numUserParams ) ;
/* 2. */
private ResultSet retrieveRefCursor ( Object qc , Object[] params ) {
ResultSet rs = null ;
rs = callStoredProcedure ( qc , SQL_STM ) ;
return rs ;
/* 3. */
public ResultSet callStoredProcedure ( Object qc , String stmt ) {
CallableStatement st = null ;
ResultSet refCurResultSet = null ;
try {
st = getDBTransaction ().createCallableStatement ( stmt , 0 ) ; // call
st.setObject ( 1 , 571 ) ; //set id of my record to 571
st.registerOutParameter ( 2 , OracleTypes.CURSOR ) ; // my ref_cursor
st.registerOutParameter ( 3 , Types.NUMERIC ) ;
st.registerOutParameter ( 4 , Types.VARCHAR ) ;
st.execute () ; //executeUpdate
System.out.println ( "Numeric " + st.getObject ( 3 ) ) ;
System.out.println ( "Varchar " + st.getObject ( 4 ) ) ;
refCurResultSet = ( ResultSet ) st.getObject ( 2 ) ; //set Cursoru to ResultSet
// setUserDataForCollection(qc, refCurResultSet); //don't work
// createRowFromResultSet ( qc , refCurResultSet ) ; //don't work
/* this works but only one-time call - so my resultSet(cursor) really have a data
while ( refCurResultSet.next () ) {
String nameProfile = refCurResultSet.getString ( 2 ) ;
System.out.println ( "Name profile: " + nameProfile ) ;
return refCurResultSet ;
} catch ( SQLException e ) {
System.out.println ( "sql ex " + e ) ;
throw new JboException ( e ) ;
} finally {
if ( st != null ) {
try {
st.close () ; // 7. Close the statement
} catch ( SQLException e ) {
System.out.println ( "sql exx2 " + e ) ;
/* 4. Store a new result set in the query-collection-private user-data context */
private void storeNewResultSet ( Object qc , ResultSet rs ) {
ResultSet existingRs = getResultSet ( qc ) ;
// If this query collection is getting reused, close out any previous rowset
if ( existingRs != null ) {
try {
existingRs.close () ;
} catch ( SQLException s ) {
System.out.println ( "sql err " + s ) ;
setUserDataForCollection ( qc , rs ) ; //should store my result set
hasNextForCollection ( qc ) ; // Prime the pump with the first row.
/* 5. Retrieve the result set wrapper from the query-collection user-data */
private ResultSet getResultSet ( Object qc ) {
return ( ResultSet ) getUserDataForCollection ( qc ) ;
// createRowFromResultSet - overridden for custom java data source support - also doesn't work
protected ViewRowImpl createRowFromResultSet ( Object qc , ResultSet resultSet ) {
ViewRowImpl value = super.createRowFromResultSet ( qc , resultSet ) ;
return value ;
}Hi I have the same problem like you ...
My SQL Definition:
CREATE OR REPLACE TYPE RMSPRD.NB_TAB_STOREDATA is table of NB_STOREDATA_REC
CREATE OR REPLACE TYPE RMSPRD.NB_STOREDATA_REC AS OBJECT (
v_title VARCHAR2(100),
v_store VARCHAR2(50),
v_sales NUMBER(20,4),
v_cost NUMBER(20,4),
v_units NUMBER(12,4),
v_margin NUMBER(6,2),
v_ly_sales NUMBER(20,4),
v_ly_cost NUMBER(20,4),
v_ly_units NUMBER(12,4),
v_ly_margin NUMBER(6,2),
v_sales_variance NUMBER(6,2)
CREATE OR REPLACE PACKAGE RMSPRD.NB_SALES_DATA
AS
v_sales_format_tab nb_tab_storedata;
FUNCTION sales_data_by_format_gen (
key_value IN VARCHAR2,
l_to_date IN DATE DEFAULT SYSDATE-1,
l_from_date IN DATE DEFAULT TRUNC (SYSDATE, 'YYYY')
RETURN nb_tab_storedata;
I have a PLSQL function .. that will return table ..
when i use this in sql developer it is working fine....
select * from table (NB_SALES_DATA.sales_data_by_format_gen('TSC',
'05-Aug-2012',
'01-Aug-2012') )
it returning table format record.
I am not able to call from VO object. ...
Hope you can help me .. please tell me step by step process...
protected Object callStoredFunction(int sqlReturnType, String stmt,
Object[] bindVars) {
System.out.println("--> 1");
CallableStatement st = null;
try {
st = getDBTransaction().createCallableStatement("begin ? := " +"NB_SALES_DATA.sales_data_by_format_gen('TSC','05-Aug-2012','01-Aug-2012') ; end;", 0);
System.out.println("--> 2");
st.executeUpdate();
System.out.println("--> 3");
return st.getObject(1);
catch (SQLException e) {
e.printStackTrace();
throw new JboException(e); -
How can you find the Last Modified Date of a particular table
Hi,
I want to show to the LAST MODIFIED date of a particular table to the user before refreshing the table with new data. Experts please suggest me the way using JDBC-SQL connection.There is no generic SQL way for this. It depends completely on the features your DBMS offers. With Oracle you'd need to create column which gets updated in a trigger. I believe MS SQL Server offers a special data type for this, which is updated automatically. I don't know about others.
-
How can I modify data from a Transparent Table without ABAP code.
Hi,All
How can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
I had fond that there is a way can do that:
1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
2, type '/h' and let debugging on
3, select one of this data then click 'Display',enter in debugging system.
4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
and, My system is ECC6.
thank you all
Edited by: xuehui li on Aug 20, 2008 6:30 PMHello,
Your approach (with Vijay's suggestion) MAY work. However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT. This will be especially true if you are working in a Production environment. Vijay's other comment is true as well. This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment. The auditors will not be impressed.
Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
Regards
Greg Kern -
MSSQL Query/View Single Line Output For Combined Multiple Data Elements - Possible Pivot Table?
HELLO...
I hope you experts out there can help me. Consider the following (2) Tables in MSSQL:
1. TENDERED --> Primary Key = DATE / DOC_NO / PAYMENT_SEQ_NO
DATE
DOC_NO
PMNT_SEQ_NO
PAYCODE_TYPE
AMOUNT
2. TENDERED_CR_CARD -->Primary Key = DATE / DOC_NO / PAYMENT_SEQ_NO
DATE
DOC_NO
PMNT_SEQ_NO
CR_CARD_NO_MASKED
CR_CARD_NAME
CR_CARD_EXP_DATE
These two tables are certainly related, based on their Primary Key values.
Now, consider the following data in those two tables:
DATE
DOC_NO PMNT_SEQ_NO
PAYCODE_TYPE
AMOUNT
03/10/2014 100001
1
CASH
100.00
03/10/2014 100001
2
CASH
-9.75
03/10/2014 100002
1
CASH
50.00
03/10/2014 100002
2
VISA
100.00
03/10/2014 100002
3
VISA
250.00
03/10/2014 100003
1
MC
125.00
03/10/2014 100003
2
AMEX
75.00
DATE
DOC_NO PMNT_SEQ_NO CR_CARD_MASKED
NAME
CR_CARD_EXP
03/10/2014 100002 2 4225******801289
MARY JONES 2016/08/31
03/10/2014 100002 3 4121******637442
JOHN DOE 2015/04/30
03/10/2014 100003 1 5428******971134
MIKE BAKER 2018/09/30
03/10/2014 100003 2 3732*****344756
LINDA LIU 2017/07/31
OK...so what we NEED...is a Combined, SINGLE RECORD Audit Report type query.
The resulting query should show, based on the Data from above, the SINGLE LINE represented in the Attached Spreadsheet.
NOTE...what's important to point out here..is that ONLY the 'CASH' Tender gets "summed"...EACH INDIVIDUAL Credit Card record MUST have its own Field...as represented in the corresponding Columns of the Spreadsheet (i.e. PMT_TYP_1, AMT_1, PMT_TYP_2,
AMT_2, and so forth).
PLEASE HELP! Any suggestions/advice would be most appreciated!
Thank You!...MarkI would not do this in SQL if I could possibly avoid it. Instead do it in the front end.
If you must do it in SQL, this is a dynamic pivot on multiple columns. Naomi Nosonovsky has a blog at
http://blogs.lessthandot.com/index.php/DataMgmt/DataDesign/dynamic-pivot-on-multiple-columns/ on how to do that. Look especially at her second example using the claims table. Of course, you must do some manipulation even before you do the multi-column
pivot, since you must first combine all the cash entries.
So one way to do it would be to build a temp table with all the entries you have except the cash entries combined into one payment sequence number. To do that you may need specifications that are not clear to me from what you have given us. For
example, if PMT SEQ 1 is VISA, PMT SEQ 2 is CASH, PMT SEQ 3 is VISA, PMT SEQ 4 is CASH, and PMT SEQ 5 is VISA, you want to combine the two cash payments. So they become PMT SEQ 2? If so, what happens to PMT SEQ 4 - is it left N/A or does
PMT SEQ 5 become PMT SEQ 4?
But once you have this temp table with the cash payments combined in the algorithm you need, then you can use Naomi's method to do the multi-column pivot. Note that Naomi uses the code
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_Name = 'Claims'
to get the column names from the permanent table Claims. To get the column names from a temp table use code like the following. To find the column names in a temp table named #MyTempTable, do
From tempdb.sys.columns
Where object_id = OBJECT_ID('#MyTempTable')
But as I say, if feasible, I would do this in the front end, not in SQL. T-SQL is a very good language for storing and retrieving data, not so good at formatting it.
Tom -
How to get selected row data of an ADF table in HashMap?
Hi,
Can anyone please tell me how to selected row data of an ADF table in HashMap like :
Object obj = pageTable.getSelectedRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)obj;
Now in above code I want the convert rowData in HashMap.
Can anyone please tell me how to do that? Its urgent.
Thanks,
VikVik,
No need to ask the same question 3 times...
In [url http://forums.oracle.com/forums/message.jspa?messageID=4590586]this post, Nick showed you how to get the Row.
If it were so urgent, you could have done a little reading of the javadocs to come up with code like this (not tested, up to you to do that)
HashMap m = new HashMap();
Row r = get it like Nick showed you to;
Object values[]=r.getAttributeValues();
String names[]=r.getAttributeNames();
for (int i=0; i<r.getAttributeCount(); i++)
m.put(names, values[i]);
Maybe you are looking for
-
Connection refused when trying to getOutputStream from https connection
Hi all ! I want to make an https connection with a server to send/get the request/response What can be the cause of the following error in the following code testHttps.java? java.net.ConnectException: Connection refused: connect at java.net.PlainSock
-
Migrating a spring application from tomcat 6 to dea weblogic 10
We deployed a spring application to TOMCAT 6.0. The application works. When the application is deployed in bea weblogic 10. it generates a a page not found.
-
How do I get digital audio to output through my Audigy 2?, What hardware do I ne
I play my 360 on my computer monitor and I have an Audigy 2 ZS sound card w/ Inspire p7800 7. speaker setup. My question is, if I have Dolby Digital 5. and DTS output through those speakers, what kind of hardware would I need to run the optical outpu
-
Usage of rounding profile in manual created production order
Hi, We are making usage of various static rounding profiles. For each of the materials produced, the rounding qty can be different, depending on the workcenters used to produce the materials (but for one material, there is only 1 rounding profile pos
-
My iPad 1 can only be updated to iOS 5 yet most apps run on iOS 7. Why can't I make the update on my iPad 1? Is this so I buy another iPad 2+? Now why would I want to buy something that will be obsolete in a few years? I really want to purchase an L