How do I include/show data from a child table in a Modal Window?
How do I show data from a child table in a Modal Window?
I have an application where each customer might have multiple addresses and phone numbers which are stored in child tables. When I show the customer in a record on a screen I can place a Modal Window button on the screen which can be pushed at runtime
to display detail information for the particular customer parent table which works great. However, I would also like to display the data from the address and phone number child tables. Is there a way to do that? Or can I just launch a hole separate screen
which would automatically display the needed data for the particular customer? If yes, how?
Thank you for any help.
I am not even sure how to describe my situation in such a way that this forum incident would be of benefit to other people as I think it is fairly unconventional.
The “add contactaddress” link does not show up on the right.
The contactaddress table is a child of the contact table.
The contact table is a child of the contactlink table.
And the contactlink table is a child of the person table.
I have it set up this way because the contact in the contact table may be a contact to multiple persons in the person table and I do not want to re-enter the contact info every time the contact is used.
In the list detail screen of the person table I can see the contactlink child collection so that I can see the name of the person in the contact table at runtime. However, the contactaddress collection is not related to the person table so it does not show
up on the right hand side of the design screen as an “add contactaddress”; nor is there “add contact” link.
What I would like to happen during runtime is that it is not necessary to switch screens from the person list detail screen to a contact list detail screen to see the addresses and phone numbers for the contact.
Is my setup unnecessarily convoluted? Is there a better way? Please see the two snapshots below.
Perhaps there is a way to call up a Detail screen from the List Detail at runtime?
Anyway, if you are still reading, thank you very much for your help.
jjjjj
Similar Messages
-
How to read the hierarchy data from the same table using loop in AMDP method
Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
DECLARE found INT := 1;
iv_partner1 = SELECT partner1 FROM but050
WHERE partner2 = iv_partner
AND reltyp = :iv_hierarchy
AND date_to >= :lv_date
AND date_from <= :lv_date;
WHILE found <> 0 do
select partner1 into ev_top_parent from :iv_partner1;
iv_partner1 = SELECT partner1 FROM but050
WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
AND reltyp = 'ZBP004'
AND date_to >= :lv_date
AND date_from <= :lv_date;
select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.PHi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG -
How can I include the data from a field in the subject of the notification email?
Instead of having a static subject line for each form response, I would like to have something like:
Form Response Received from <<Name>>
That way, each email would have a unique subject line and make it easier to use conversation view in my email.
Thanks for any help you can provide. I searched the documentation and couldn't find the answer.There is not a way to do that within the automated system-wide e-mailing of responses from the FormsCentral application.
Doing a search in your e-mail, or setting up e-mail filters to separate/segregate e-mails into different folders (based on content or selections in the submissions) is a good way to extend functionality outside of FormsCentral.
Brian -
How to transfer game app including its data from an ipad to another?
how to transfer game app including its data from an ipad to another?
Do both iPads use the same Apple ID?
How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
How to Transfer App Data and Game Saves from One iOS Device to Another
http://lifehacker.com/5891964/can-i-transfer-app-data-and-game-saves-from-my-iph one-to-a-new-ipad
How to transfer data from your old iPad to your new iPad
http://www.imore.com/how-transfer-data-your-old-ipad-your-new-ipad-air-or-retina -ipad-mini
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
Cheers, Tom -
How can I modify data from a Transparent Table without ABAP code.
Hi,All
How can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
I had fond that there is a way can do that:
1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
2, type '/h' and let debugging on
3, select one of this data then click 'Display',enter in debugging system.
4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
and, My system is ECC6.
thank you all
Edited by: xuehui li on Aug 20, 2008 6:30 PMHello,
Your approach (with Vijay's suggestion) MAY work. However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT. This will be especially true if you are working in a Production environment. Vijay's other comment is true as well. This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment. The auditors will not be impressed.
Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
Regards
Greg Kern -
How to get the data from a cluster table to BW
Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
RajeshHI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh -
PLD Report does not show data from Query
Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
NickHi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty -
How to recover the autocomplete data from a Time Machine backup?
How to recover the Safari 5.1.7 autocomplete data from a Time Machine backup on Mac OS X 10.6.8 (Snow Leopard)?
To solve other issues (Safari crashing sometimes when saving web pages), I selected:
Safari - Empty Cache
Safari - Reset Safari - Selected ALL - Reset
I could later on recover some Safari autofill data restoring
HD/Users/~/Library/Cookies/Cookies.plist
HD/Users/~/Library/Safari/Form Values
HD/Users/~/Library/Safari/History.plist
but other autocomplete data is missing, including the one when filling web form search fields in web pages, for instance, and also some username and password login data on some web sites.
How to restore all such data from the Time Machine Backup?
Thanks!I also recovered:
HD//Users/~/Library/Keychains/login.keychain
What else should I recover? -
How can I enter the data from the recordset into your insert query
Hi
i would like to know how I can enter the data from the recordset into your insert query without using a hidden field.
thanks
------------------------------------------------------------------------------------Below is the code------------------------------------------------------------------------------------- -----
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
$insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['com_topic'], "int"),
GetSQLValueString($_POST['commentby'], "int"),
GetSQLValueString($_POST['title'], "text"),
GetSQLValueString($_POST['com_content'], "text"),
GetSQLValueString($_POST['com_date'], "text"),
GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsTopics = "SELECT topic_id, topic FROM topics ORDER BY topic_date DESC";
$rsTopics = mysql_query($query_rsTopics, $ezzyConn) or die(mysql_error());
$row_rsTopics = mysql_fetch_assoc($rsTopics);
$totalRows_rsTopics = mysql_num_rows($rsTopics);
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsOnline = "SELECT online_id, `online` FROM `online` ORDER BY online_id DESC";
$rsOnline = mysql_query($query_rsOnline, $ezzyConn) or die(mysql_error());
$row_rsOnline = mysql_fetch_assoc($rsOnline);
$totalRows_rsOnline = mysql_num_rows($rsOnline);
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsCommentby = sprintf("SELECT user_id, username FROM users WHERE username = %s", GetSQLValueString($colname_rsCommentby, "text"));
$rsCommentby = mysql_query($query_rsCommentby, $ezzyConn) or die(mysql_error());
$row_rsCommentby = mysql_fetch_assoc($rsCommentby);
$totalRows_rsCommentby = mysql_num_rows($rsCommentby);
?>
<?php include("../includes/access.php"); ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>ezzybay - easy click, ezzy shopping</title>
<link href="../css/global.css" rel="stylesheet" type="text/css" />
<link href="../css/navigation.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<?php include("../includes/top.php"); ?>
<div id="content">
<div id="pageTitle">
<h2>CMS Section:</h2>
<p>Comment Topics Page</p>
</div>
<?php include("../includes/leftnav.php"); ?>
<div id="mainContent">
<form action="<?php echo $editFormAction; ?>" method="post" name="frmpostComment" id="frmpostComment">
<table align="center">
<caption>Post Comment</caption>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Topic:</td>
<td><select name="com_topic" class="listbox" id="com_topic">
<?php
do {
?>
<option value="<?php echo $row_rsTopics['topic_id']?>"><?php echo $row_rsTopics['topic']?></option>
<?php
} while ($row_rsTopics = mysql_fetch_assoc($rsTopics));
$rows = mysql_num_rows($rsTopics);
if($rows > 0) {
mysql_data_seek($rsTopics, 0);
$row_rsTopics = mysql_fetch_assoc($rsTopics);
?>
</select></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Title:</td>
<td><input name="title" type="text" class="textfield" value="" size="32" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right" valign="top">Comment:</td>
<td><textarea name="com_content" cols="50" rows="5" class="textarea"></textarea></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Status:</td>
<td><select name="online_id" class="smalllistbox">
<?php
do {
?>
<option value="<?php echo $row_rsOnline['online_id']?>" <?php if (!(strcmp($row_rsOnline['online_id'], 2))) {echo "SELECTED";} ?>><?php echo $row_rsOnline['online']?></option>
<?php
} while ($row_rsOnline = mysql_fetch_assoc($rsOnline));
?>
</select></td>
</tr>
<tr> </tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"> </td>
<td><input type="submit" class="button" value="Insert record" /></td>
</tr>
</table>
<input name="commentby" type="hidden" id="commentby" value="<?php echo $row_rsCommentby['user_id']; ?>" />
<input type="hidden" name="com_date" value="<?php echo date("d/m/y : H:i:s", time()) ?>" />
<input type="hidden" name="MM_insert" value="frmpostComment" />
</form>
</div>
</div>
<?php include("../includes/footer.php"); ?>
</div>
</body>
</html>
<?php
mysql_free_result($rsTopics);
mysql_free_result($rsOnline);
mysql_free_result($rsCommentby);
?>I'll keep it simple and only use the date as an example. Hopefully you get the concept from the example. Basically you create a recordset and insert the recordset value instead of the POST value into your insert query. In the example below I declared a variable for $the_date and entered the variable into the INSERT query instead of the hidden POST field.
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$the_date = date("d/m/y : H:i:s", time());
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
$insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['com_topic'], "int"),
GetSQLValueString($_POST['commentby'], "int"),
GetSQLValueString($_POST['title'], "text"),
GetSQLValueString($_POST['com_content'], "text"),
GetSQLValueString($the_date, "text"),
GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
?> -
How to move data from a staging table to three entity tables #2
Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservicesYou can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner. -
Show data from sql server to oracle db
Hi,
I am using oracle 10g R1 on windows 2003 platform. On one machine database 10gR1 is running and on other machine sql server is running. I want to retrieve some data from sql server to oracle database. Please tell me how I can show data from sql server to oracle db.
ThanksTo make heterogeneous connection with oracle:
1.First make an ODBC connection, make entry in System DSN(to create a data source)
2.Make an entry in tnsnames.ora
3.Make an entry in listener.ora under SID_LIST_LISTENER
4.Make an entry in file named init<HS>.ora file located "oracle_base\oracle_home\db\hs\admin"
5.Restart the listener
e.g:
1. create a odbc system dsn named like 'sqlserver'
2. sqlserver= (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp) (HOST=xx.xx.xx.xx) (PORT=1521))
(CONNECT_DATA = (SERVICE_NAME=sqlserver))
(HS = OK)
3. (SID_DESC = (SID_NAME = sqlserver) (ORACLE_HOME = oracle_base\oracle_home\db) (PROGRAM = hsodbc) )
4.Create a file named initsqlserver.ora and make the following entry:
HS_FDS_CONNECT_INFO = sqlserver
Alternatively, you can copy the file named inithsodbc.ora and rename it to initsqlserver.ora
and edit as HS_FDS_CONNECT_INFO = sqlserver
5. lsnrctl reload listener_name
regards
adnan kaysar -
i connect my externalpendrive to macbook pro but it cannot detect and my important data is there in my pen drive so how can i collect this data from my pendrive?
make sure that in your finder preferences you have it checked to show external drives on the desktop and in the sidebar of finder
you find these preferences by selecting the finder icon (blue square on the dock w/ smiley face on it) then click on the work "finder" at top left corner of computer screen then click on preferences then general and put check next to show these items on the desktop and put check next to external drives
now you should see it on the desktop if you still can't open the drive or access it, it may be in format the mac can't read or write to so that could be an issue. -
Don't show data from web service to Cross-Tab in xcelsius
Hi all visitors
I have created one web service and my web service will show data like this.
Group ___Floor ____Amount
Member__Floor 1__1000000
Member__Floor 2__1000000
Member__Floor 1__1000000
Member__Floor 2__1000000
Member__Floor 2__2200000
Member__Floor 1__ 1000000
Member__Floor 1__ 1000000
In my xcelsius, i have option to make it to cross-tab.
when i use that data( data above by manual) to excel spreadsheet. The data will change to
Group______________Floor1________________Floor2______________GrandTotal
Member____________5000000_____________ 3200000_____________8200000
GrandTotal__________5000000_____________ 3200000_____________8200000
But when i load the data from web service,It doesn't show anything.
(when i use list view to show data from web server, i see all data)
How can i load data from web service and show the data like manually?
Best Regards,Hi Tony,
As per your example i have used the SUMIF fucntion
have a glance at that and let me know if you need help
Data coming from webservice >> Concat Group Floor Amount
=C7&D7 Member Floor1 1000000
=C8&D8 Member Floor2 1000000
=C9&D9 Member Floor1 1000000
=C10&D10 Member Floor2 1000000
=C11&D11 Member Floor2 2200000
=C12&D12 Member Floor1 1000000
=C13&D13 Member Floor1 1000000
Cross Tab >>Group Floor1 Floor2
Member =SUMIF($B$7:$B$13,$H$7&I6,$E$7:$E$13) =SUMIF($B$7:$B$13,$H$7&J6,$E$7:$E$13)
Grand Total =SUM(I7) =SUM(J7)
Original data after
Group Floor1 Floor2
Member 4,000,000 4,200,000
Grand Total 4,000,000 4,200,000
Hope this may solve your issue.
Ley me know if you have any other issues.
Regards,
AnjaniKumar C.A. -
How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?
How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?
You would have to restore to your entire iCloud backup, if you have one. (The backup includes app data.) Restoring to an iCloud backup has to be done in the initial setup process. If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup. Be sure you are connected to wifi and your charger as this will take some time to finish.
Maybe you are looking for
-
Mail from one email address won't download
Emails from one particular email address won't download into Mail for my [email protected] account. Email from everyone else comes in fine. I can see his mail in webmail and on my iPhone, but not in Mail. It comes through to my yahoo address but no
-
what am i spoopsed to type here?!?!?!
-
Hello, I have a dilemma. I have around 40,000 PDF of documents which need to extract information. There are many tools on the internet but I want to know if adobe has some method to extract this information. The detail is that also have to extract in
-
Not able to use Java Virtual Machine in some site
I was not able to access a site with Java. The error I get is al.ssl.InputRecord.read(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(Unknown Source) at com.sun.net.ssl.i
-
LR 1.4.1 will not import from disc anymore
I tried to import some jpeg files from disc, chose the file destination etc. settings as usual in the Import panel, but nothing was imported. I have tried again but now cannot even get the import settings panel - I choose the pictures, and just get a