Data source doesn't show porper data while flat file data loading

Hi Experts,
I am trying to load data from flat file for info object 0GL_ACCOUNT. I have created an application component and data source.
My question is after loading text data in the corresponding data source, it shows only few characters of the actual data.
For Ex. in my original data i have G/L account name "Comp Hardware Purchase" but after loading into the data source it shows only "Comp Hardwa".
I want to show the whole name "Comp Hardware Purchase ". I know there is some text length problem but i couldn't find it. What steps i need to follow?
Please help.
Full points will be given to the useful answers ****
Thanks and Regards,
Niranjan Chechani

HI Niranjan,
Go to your data source and check whether the field and infoobject are having the same lenght. If the infoobject lenght is less than your field lenght wihc is coming from Flat file then such issue occur.
Search for your flatfile datasource and and doubel clik on the datasource and check the fileds tabs, there you will have the mapping or you can also check your Transfer or Update rules of the target.
Regards,
Nanda.S

Similar Messages

BDC (Flat File Data Validation) - Code

I am trying to validate flat file data BEFORE performing BDC (Call Trans. or Session)..
Pls help me out in below code for xk02..
DATA: BEGIN OF itab occurs 0, "ITAB having flat file data.
      lifnr(16) ,
      bukrs(4),
      ekorg(4),
      END OF itab.
DATA: BEGIN OF int_final occurs 0,
      lifnr(16) ,
      bukrs(4),
      ekorg(4),
      status(6),
      message(6),
      END OF int_final.
DATA: int_final TYPE TABLE OF int_final.
DATA: wa_itab TYPE TABLE OF itab.
DATA: validate_itab TYPE TABLE OF itab. "VALIDATE_ITAB having master data.
DATA: wa_validate_itab TYPE TABLE OF itab.
FORM data_validation .
SELECT LFB1LIFNR LFB1BUKRS LFM1~EKORG INTO TABLE validate_itab
         FROM LFB1 INNER JOIN LFM1 ON LFB1LIFNR = LFM1LIFNR.
IF sy-subrc = 0.
SORT validate_itab BY lifnr bukrs ekorg.
ENDIF.
LOOP AT itab INTO wa_itab.
READ TABLE validate_itab WITH KEY
lifnr = itab-lifnr
bukrs = itab-bukrs
ekorg = itab-ekorg
BINARY SEARCH.
IF sy-subrc NE 0.
PERFORM f_error_log USING text-005. "Invalid Value Set
CONTINUE.
ENDIF.
ENDLOOP.
ENDFORM.                    " data_validation
*&      Form f_error_log
FORM f_error_log USING l_message TYPE string.
CLEAR : fs_final.
fs_final-lifnr = itab-lifnr.
fs_final-bukrs = itab-bukrs.
fs_final-ekorg = itab-ekorg.
fs_final-status = text-014. "Error
fs_final-message = l_message.
APPEND fs_final TO int_final.
ENDFORM.                    " f_error_log
Thanks..

Hi GAurav,
I have a small question in th validation.
In LFM1~LIFNR does not contian any value how u r comparing both and one more thing After getting the data using GUI_upload u will get the data into validate_tab.
Loop at Vlidate_tab into wa_itab.
SELECT LFB1LIFNR LFB1BUKRS LFM1~EKORG INTO TABLE validate_itab
FROM LFB1 INNER JOIN LFM1 ON LFB1~LIFNR = wa_itab-lifnr.
endllop.
Thanks,

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Urgent: Transport of Flat File Data Source

While transporting flat file data source is it required to transport first in a separate request or everything can go in 1 request.
Thank you,
sam

Hi,
In this case it can go in one request as no replication is needed. But for other datasources, you need to send the datasources first in a separate request and then replicate the datasource in BW before you send the BW changes.
Cheers,
Kedar

Flat file data Source creation in BI7

Hi ,
I am trying to create flat file data source in BI7 to load master data.
Aftre i enter all the details,while activating its giving me error like this
Runtime Errors DATA_LENGTH_NEGATIVE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
Can anyone suggest me abt this.
Thanks
Thiru

Hi,
In the datasource def go to the fields tab. Here check the values for the length og the field.
Check whether all the values are within 60
Regds,
Shashank

Conversion_Exit_Cunit_error occured while loading the Flat file data

Hi
Iam tryign to load Flat file data into an ODS, i am getting error like Error Conversion Cunit.
Also we are using 0unit in the ODS for which CUNIT is a conversion rule
Can you please suggest me why iam getting this error

Hi Sunil
Hope you can check whether you are loadig the flat file data from application server or Client workstation.
May be if you are loading from Client work station you will face problem of this type.
Try to check if any change in format in the file.
at the end of the file delete the spaces.

Flat file data upload to ODS failed

Hi guys,
While loading the flat file data to ODS, it gets fails immediately without loading single record. Error message shows ::
" Error when opening the data file <file name> (origin A)."
"Error in the data request"
"Error occurred in the data selection"
I am trying to load the data manually thru Infopackage and file is lying in the Application Server and full access given to it. But the important part is when we try to load the file again without doing any changes, it run fine and loads the data without any issues. This happens with every load & everyday.
Any solutions?
Regards
Sanjiv

Hi CK,
Step-by-step Analysis status are as given::
<Red> Data request sent off ?
<No colour> RFC to source system successful ?
<No colour> Does selectable data exist in the source
<Red> Data selection successfully started ?
<Red> Data selection successfully finished ?
<Red> Processing error in source system reporte
<No colour> RFC to Warehouse successful ?
<Red> Processing error in Warehouse reported ?
<No colour> Processing successfully finished?
<No colour> All reported data packets received?
<No colour> All data packets complete ?
<Green> Have all Processing Steps been Carried ou
<Green> All Data Packets Updated in all Targets?
<Green> Inadmissable Aggregation?
Regards
Sanjiv

Errors when loading flat file data

We just test to load a very simple flat file data with only two lines and the two lines of data in preview of InfoSource is correct. But when run InfoPackage to load data, the monitor of the InfoPackage shows the following errors (see in between two dashed lines below):
Error getting SID for ODS object ZDM_SUBS
Activation of data records from ODS object ZDM_SUBS terminated
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Value 'Bottom' (hex. '0042006F00740074006F006D') of characteristic ZRATEPLN contains invalid characters
Value 'Dealer' (hex. '004400650061006C00650072') of characteristic ZCHANNEL contains invalid characters
Value 'Bottom' (hex. '0042006F00740074006F006D') of characteristic ZRATEPLN contains invalid characters
Value '19884/' of characteristic 0DATE is not a number with 000008 spaces
Value '/19812' of characteristic 0DATE is not a number with 000008 spaces
Value '19884/' of characteristic 0DATE is not a number with 000008 spaces
In the flat file (excel sheet saved as a CSV file), for each row of the data, there are two fields which are start_date and end_date and the date format is MM/DD/YYYY and in the Transfer Rule, we transfer the date format from MM/DD/YYYY to YYYYMMDD which is required by DATS InfoObject type in BW. If you need the excel sheet of data in order to answer our questions about the above errors, you can give us your e-mail address and we can send the simple two rows of data excel sheet file to you.
Thanks!

Hi Kevin,
1.You can use lowercase letters in the values for your characteristics provided you have checked the lowercase checkbox in the general tab page of Create characteristic screen.But when you do so no masterdata tables,text tables, or another level of attributes underneath are allowed.
OR
Use only upper case letters in your characteristic unchecking the above mentioned box.
2.The date format in the CSV file should be yyyymmdd.It should have 8 characters . I guess there is something strange in your "calendardays" since I could not find 8 characters irrespective of the order.Do not forget to use zeroes.
Hope this works.
Reward if it is helpful.
Regards,
Balaji

Transfer data from Result Set (Execute SQL Task) into Flat File

Hi to all,
My problem is this:
-) I have a stored procedure which use a temporary table in join with another "real" table in select statement. In particular the stored procedure look like this:
create table #tmp
col1 varchar(20),
col2 varchar(50)
--PUT SOME VALUE IN #TMP
insert into #tmp
values ('abc','xyz')
--SELECT SOME VALUE
select rt.*
from realTable rt, #tmp
where rt.col1 = #tmp.col1
-) I cannot modify the stored procedure because I'm not admin of database.
-) I HAVE THE REQUIREMENT OF TRANSFER DATA OF SELECT STATEMENT OF SOTRED PROCEDURE INTO FLAT FILE
-) THE PROBLEM is that if I use an OLEDB source Task within a Data Flow Task I'm not be able of mapping column from OLEDB source to flat file destination. The reason for this, is that in the "Column page" of OLEDB source task, SSIS do not retrieves
any column when we using a temporary table. The reason for this, is that SSIS is not be able to retrieve metadata related to temporary table.
-) One possible solution to this problem is to use an Execute SQL Task to invoke the stored procedure, store the result returned from stored procedure in a Result Set through a Object type user variable.
-) The problem now is: How to transfer data from result set to flat file?
-) Reading here on this forum the solution look be like to use a Script task to transfer data from result set to flat file.
QUESTIONS: How to transfer data from result set to flat file using a script task?? (I'm not an expert of vb .net) Is it really possible?? P.S.: The number of row returned of stored procedure is very high!
thanks in advance.

Hi Visakh16<abbr
class="affil"></abbr>
thanks for the response.
Your is a good Idea, but I do not have permission to use DDL statement on the database in production environment.

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

How to store the flat file data into custom table?

Hi,
Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
Regards,
Sujan

Hie
u can use function
F4_FILENAME
to pick the file from front-end or location.
then use function
WS_UPLOAD
to upload into
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'   "Function to pick file
    EXPORTING
      field_name = 'p_file'     "file
    IMPORTING
      file_name = p_file.     "file
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                       = p_file1
    TABLES
      data_tab                      = it_line
*then loop at it_line splitting it into the fields of your custom table.
loop at it_line.
          split itline at ',' into
          itab-name
          itab-surname.
endloop.
then u can insert the values into yo table from the itab work area.
regards
Isaac Prince

Flat file data load - ODS - Look up data in Startroutine

Hi All,
There is a requirement that I have two ODS say 1) ABC and XYZ.
For Both ODS , We load flat file data.
First we load data to ABC for current fiscal period
During the data load to XYZ, We lookup part nos data in ABC for current fiscal period , if data there , for those part nos we load XYZ Flat file data.
My requirement is that , I need to fetch part nos data from ABC for Fiscal period < current fisacl period. Then I need to extract already loaded data for those part nos from XYZ and Mark the flag field as Non reportable .
How can we achieve this ?
Please advice
Thanks
Ajay

Hi ,
Thanks for your reply.
I have done so. When I add lines of My Internal table data to DATA_PACKAGE, It gives the syntax error that both structures are not unique. We have several fields in XYZ ods but they are not in Communication structure.
Thats the problem. Also , if I write the code , will it be executed for each datapackage. I mean , for each datapacket process , my code will fetch whole data from ABC and then from XYZ. Repetion will be there?
Any other logic can i use ?
Thanks
Ajay

How to Merge Flat file data and DSO Data

I have one DSO A which has more than 20 objects (5 of them are keys), which include 0comp_code,0gl_account,. I have a Flat file which has the following fields ,COMPANY CODE, GLACCOUNT and SUPERVISOR ,EXECUTIVE,ANALYST. My requirement is to get a DSO with consolidated data from DSO A and Flat File data. That means for exapme, In my DSO A , I have US01 COMPANY CODE so when I merge the data in DSO C It should diplay the data for the supervisor exe and analyst for DSO A as well
When I added with 2 DSOs A (ECC ) and B (Flat file)..C is getting the data from B and its appending the data for Flat file at the end...So I want to merge both...DSO A should match up with DSO B flat file company code and gl account and should display the remaining fields
I think its clear..Can any one let me know the solution ASAP...
Note: We are on BI7.0 not 3.5...
Thanks in advance

I have the following key fields in DSO A :
0COMP_CODE,OGL_ACCOUNT, 0CHRT_ACCT,0FISCVARNT,0FISCPER,0AC_DOC_NUMBER,0ITEM_NUM.
Here are the total fields in Flat File:
COMPANY CODE,GL ACCOUNT,SUPERVISOR,ANALYST,EXECUTIVE.
Here am taking 0COMP_CODE and 0GL_ACCOUNT as key fileds in DSO B for Flat File...
For every month there will be 5 to 6000 records for Flat file ...
Thanks

Flat file data needs to be update in MM02 t-code with bdc

Hi,
I have a requirement that flat file data shoud be update in MM02 t-code in basic data view (Units of measure ) columns .
I have no access in dev. for mm02 t-code but mm03 available.
Can somebody suggest how to approach this. I know through recording (SHDB) i will do.
But can i put mm03 instead of mm02 at the time of recording?

Hi,
thanks,
But i want to update these 4 fields data from flat file.
How to catch in the FM ?
MARM-MATNR MARM-MEINH MARM-UMREZ MARM-UMREN
Material UoM Numerator Denominator

Need help in laoding flat file data, which has \r at the end of a string

Hi There,
Need help in loading flat file data, which has \r at the end of a string.
I have a flat file with three columns. In the data, at the end of second column it has \r. So because of this the control is going to the beginning of next line. And the rest of the line is loading into the next line.
Can someone pls help me to remove escape character \r from the data?
thanks,
rag

Have you looked into the sed linux command? here are some details:
When working with txt files or with the shell in general it is sometimes necessary to replace certain chars in existing files. In that cases sed can come in handy:
1 sed -i 's/foo/bar/g' FILENAME
The -i option makes sure that the changes are saved in the new file – in case you are not sure that sed will work as you expect it you should use it without the option but provide an output filename. The s is for search, the foo is the pattern you are searching the file for, bar is the replacement string and the g flag makes sure that all hits on each line are replaced, not just the first one.
If you have to replace special characters like a dot or a comma, they have to be entered with a backslash to make clear that you mean the chars, not some control command:
1 sed -i 's/./,/g' *txt
Sed should be available on every standard installation of any distribution. At lesat on Fedora it is even required by core system parts like udev.
If this helps, mark as correct or helpful.

Data source doesn't show porper data while flat file data loading

Similar Messages

Maybe you are looking for