Data Source Login (ColdFusion)
I am trying my best to work with Coldfusion however, when I'm connecting my database in Dreamweaver it's asking me for a password. Also, when I'm creating my data source in coldfusion I'm getting an error. Should I have my WAMP sever on? and if so, isn't that turning on php? Sorry NOOB if you haven't guessed by now...
WAMP has nothing to do with ColdFusion, so you can forget about that part. Your ColdFusion server needs to be running.
I'm not a ColdFusion expert, so someone else will need to help you with your error, but nobody can do that unless you say exactly what error message you're getting.
Similar Messages
-
Data source login + ServerSession + uow
Can anyone please provide assistance as to what lines of code is necessary to be able to create a ServerSession, then login using the username and password of the data sources of OC4J, and then acquire a unit of work to be used in doing read and write transactions against a 9i database. My toplink version is 10g (9.0.4). The following are snippets of my java code:
ServerSession session = null;
session = (ServerSession)SessionManager.getManager().getSession("session");
// I didn't put session.login() because I
// read somewhere that there is already an implicit
// login when the ServerSession (session variable) was
// created via the second line above.
UnitOfWork unitOfWork;
System.out.println("step3.1");
Session session1 = (Session) session.acquireClientSession();
unitOfWork = session1.acquireUnitOfWork();
// the problem is, at this point of acquiring a unit of
// work, at runtime, I already encounter a
// java.lang.NullPointerException. Does it mean that my
// assumption of an implicit login during the
// ServerSession creation is not correct?
Please help. I guess this are still the basic stuff of Toplink but the standard Toplink documentations don't seem to help. Thanks in advance.For the benefit of others, my unit of work is now defined as:
unitOfWork = getServerSession().acquireClientSession().acquireUnitOfWork();
Likewise, I have included in my session bean the following methods:
public void login() {
// Get a Server Session from the sessions xml
ServerSession aSession = (ServerSession)SessionManager.getManager().getSession("Session");
aSession.login();
setServerSession(aSession);
public static void logout() {
if (getServerSession() != null) {
getServerSession().logout();
protected static ServerSession serverSession = null;
private static ServerSession getServerSession() {
return serverSession;
private void setServerSession(ServerSession session) {
this.serverSession = session;
With this, all i have to do is invoke login() to establish a database login.
Anthony
Philippines -
I'm trying to use a JNDI data source in CF 10. We used to do it in CF 8 in the JRun admin, and was able to use data sources across coldFusion and java code. Any ideas on how to make it work in CF 10? I've tried several online resources, setting up a resource in Context.xml:
<Resource name="mydatasource" auth="Container" type="javax.sql.DataSource"
maxActive="100" maxIdle="30" maxWait="10000"
username="myuser" password="mypass" driverClassName="macromedia.jdbc.MacromediaDriver"
url="jdbc:macromedia:sqlserver://127.0.0.1:1433;databaseName=mydb;SendStringParametersAsU nicode=false;SendStringAsUnicode=false"/>
then a resource-ref in web.xml
<resource-ref>
<description>DB Connection</description>
<res-ref-name>mydatasource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
but I'm getting errors
java.lang.IllegalArgumentException: Cannot convert value of type [jav
a.lang.String] to required type [javax.sql.DataSource] for property 'dataSource'
: no matching editors or conversion strategy foundIf you want to turn your application into a provider, refer to the Developer's Guide at http://docs.sun.com/source/816-6362-10/index.html
-
Hi
I have a quick question re datasource login.
I havent touched my Crystal Reports for about a year. Since I created the reports (which users have been using through Crystal Reports server) I have changed my PC.
I need to make a change in the formulas of the reports so I have reinstalled Crystal Reports 11 onto my PC and opened the reports. The forumula change is simple but I am having a nightmare with the data source login. The report runs against an SQL database. From memory all I did the last time was create an ODBC connection on my PC (which used the the SQL login sa account) and configured the reports to use that ODBC connection. When I open the report it asks me for the data source location which I tell it to use the one I created and the report runs fine.
If I close Crystal Reports and and then re-open, I press F5 to run the report and it gain asks me for the data source credentials.
Any ideas, I'm sure it is something simple I am missing?
ThanksGuys
Thanks for your help
Ive managed to fix it but not really sure how although I'm sure a few of the things you have mentioned is what I have done.
I basically restored the reports from last nights backup (before I did the changes), re-did the changes and saved and now it seems to work. I think the difference here is that I had created the odbc connection prior to changing the reports - if that makes sense?
What I would like to do is fully understand how this data source connection works.
Don, when I open the report now and hit f5 the report presents me with the parameters and not the database login screen as it was doing before - how is this? What credentials is it using? The SQL sa account (which I configured the ODBC connection to use) or is it my domain account of which I assume permissions for this account must be set on the actual SQL database?
As you and Jeff suggested when I look at the datasource connection screen it shows "trusted Connection: 1" - what does this mean and how is this configured, have I configured this in Crystal somewhere?
Thanks
Andy -
Problem with new data-sources format
Hi, I m moving to Oracle IAS 10.1.3, so i m testing the application with the standalone version.
I use the datasource converter just like the manual say.
this is how datasources looks..
<?xml version = '1.0' encoding = 'UTF-8'?>
<data-sources>
<managed-data-source user="scott" password="tiger" login-timeout="-1" connection-pool-name="OracleDS_connectionPool" jndi-name="jdbc/OracleCoreDS" name="OracleDS_jdbc/OracleCoreDS"/>
<managed-data-source login-timeout="-1" connection-pool-name="OracleDS_connectionPool" jndi-name="jdbc/OracleCoreDS_non_tx" name="jdbc/OracleCoreDS_non_tx_jdbc/OracleCoreDS_non_tx"/>
<managed-data-source login-timeout="-1" connection-pool-name="OracleDS_connectionPool" jndi-name="jdbc/OracleDS" name="jdbc/OracleDS_jdbc/OracleDS"/>
<native-data-source user="user" password="pass" url="jdbc:oracle:thin:@70.101.0.200:1521:DEV" login-timeout="-1" data-source-class="oracle.jdbc.pool.OracleDataSource" jndi-name="jdbc/etgs" name="etgs"/>
<connection-pool name="etgs_connectionPool" connection-retry-interval="0" inactivity-timeout="30" max-connections="2147483647">
<connection-factory factory-class="oracle.jdbc.pool.OracleDataSource" user="etgs" password="etgs" url="jdbc:oracle:thin:@70.101.0.200:1521:DEV" login-timeout="-1"/>
</connection-pool>
<connection-pool name="OracleDS_connectionPool" connection-retry-interval="0" inactivity-timeout="30" max-connections="2147483647">
<connection-factory factory-class="oracle.jdbc.driver.OracleDriver" user="scott" password="tiger" url="jdbc:oracle:thin:@//localhost:1521/oracle.regress.rdbms.dev.us.oracle.com" login-timeout="-1"/>
</connection-pool>
</data-sources>
When I start de oc4j, I have the following problem:
C:\soft\oc4j_101300\bin>oc4j -start
Starting OC4J from C:\soft\oc4j_101300\j2ee\home ...
[2006-08-23 17:54:46,210] WARN org.hibernate.cfg.HbmBinder - Could not perform validation checks for component as the c
lass ar.com.tgs.spac.domain.solicitud.SolicitudProgramada was not found
[2006-08-23 17:54:49,882] WARN org.hibernate.util.JDBCExceptionReporter - SQL Error: 17002, SQLState: null
[2006-08-23 17:54:49,882] ERROR org.hibernate.util.JDBCExceptionReporter - Excepci¾n de E/S: Socket is not connected
[2006-08-23 17:54:49,897] WARN org.hibernate.cfg.SettingsFactory - Could not obtain connection metadata
java.sql.SQLException: Excepci¾n de E/S: Socket is not connected
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:287)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:430)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:218)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:159)
at org.springframework.orm.hibernate3.LocalDataSourceConnectionProvider.getConnection(LocalDataSourceConnectionP
rovider.java:80)
at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:72)
at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:1463)
at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1004)
at org.springframework.orm.hibernate3.LocalSessionFactoryBean.newSessionFactory(LocalSessionFactoryBean.java:777
at org.springframework.orm.hibernate3.LocalSessionFactoryBean.afterPropertiesSet(LocalSessionFactoryBean.java:70
3)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowi
reCapableBeanFactory.java:1058)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:363)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:176)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:105)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1012)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:823)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:345)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:176)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:105)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1012)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:823)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:345)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:176)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:105)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedMap(BeanDefinitionValueRe
solver.java:225)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:117)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.resolveConstructorArguments(Abst
ractAutowireCapableBeanFactory.java:713)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.autowireConstructor(AbstractAuto
wireCapableBeanFactory.java:611)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:329)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:176)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:105)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1012)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:823)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:345)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:176)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:105)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1012)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:823)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:345)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueRes
olver.java:176)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionV
alueResolver.java:105)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAuto
wireCapableBeanFactory.java:1012)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCap
ableBeanFactory.java:823)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapab
leBeanFactory.java:345)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:226)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:147)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListable
BeanFactory.java:275)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:318)
at org.springframework.web.context.support.AbstractRefreshableWebApplicationContext.refresh(AbstractRefreshableW
ebApplicationContext.java:134)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:230)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:156)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:48)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1015)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:649)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:428)
at com.evermind.server.Application.getHttpApplication(Application.java:512)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite
.java:1975)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1894)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:633)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:302)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:273)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:180)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2296)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:944)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:113)
at java.lang.Thread.run(Thread.java:595)
[2006-08-23 17:54:50,179] WARN net.sf.ehcache.config.Configurator - No configuration found. Configuring ehcache from eh
cache-failsafe.xml found in the classpath: code-source:/C:/soft/oc4j_101300/j2ee/home/applications/app-web/WEB-INF/lib/e
hcache-1.1.jar!ehcache-failsafe.xml
Any idea ?
really thanksAnother strange thing..
My ABAP colleague, debugged the program for me and point out:
* get data class (only standard and user values)
> SELECT * FROM ddart INTO TABLE l_t_ddart
ORDER BY tabart.
DELETE l_t_ddart WHERE ddclass <> 'STD' AND
ddclass <> 'USR'.
LOOP AT l_t_ddart INTO l_s_ddart.
The l_t_ddart table contains only 21 rows (without my new Data Class, which is visible under SE16!)! I checked under oracle sqlplus and SELECT * FROM SAP<SID>.ddart; returned 22 rows WITH my new Data Class!
I'm a little bit confused... -
When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support -
File data source not found with guest login???
Hello everybody,
i'm working with BIP 10.1.3.2.1 on Win2003/Tomcat.
Everytime if i call a report with a file data source directly via url or in the gui via guest login i get the following error message: "File data source not found: <file data source name>".
If i use a login in the gui which have the explizit permision to use this data source then there is no problem. Well at this point u might say then use this account, but - if i call a similar report with a database data source directly via url or guest login in the gui everything works fine. So, where is the point? Any ideas?
Best regards
Ralf KanisHi guys,
I'm running into exactly the same issue. The problem seems to occur only when the report being accessed by guest is a file data source. The only other option I could think of is setting up SSO for BIP and the application issuing the URL to the report.
Could'nt find anything else in the documentation or known issues list that might fix this without having to setup Single Sign On. Any further luck with your investigation? I'd appreciate any feedback.
Thanks
Jonathan Cruz -
Login Module validation against two different data sources
Hi All,
We have the following setup
NW Portal 7.31
Single stack
We are in the process of implementing Employee Self Service 1.50 WDA.
And as part of the requirement , we have implemented LDAP as the UME DataSource.
So, employees log into the portal using the LAN ID and Windows password and are authenticated using the Logon ticket.
Now the client has come up with a requirement to have all German employees login with their ECC user id and password.
NOTE: ECC User ID and LAN IDs are the same, but the passwords are different.
a) Is it possible to use two UME data sources for logon validation.
b) Is customization of the Login module needed for this scenario?? If Yes, what components need to customized?
c) What is the best approach to handle this requirement?
Thanks.
Regards,
Rajcheck this link if it provide any helpful info:
User Mappings in the Authentication Framework of SAP NetWeaver Application Server (AS) Java - Security and Identity Mana…
Also you can search around creating a custom login module for authenticating useres against ECC ,if its possible you need to plugin the custom login module in your authentication stack along with the applicable flag and order so that if user authentication failed at ldap level then the control should go to authenticate it against the ECCcustom login module and logon ticket should be generated in both the cases. -
Creating a Coldfusion Data Source that connects to a DB on a different server
Your assistance is appreciated. I am attempting to create a data source on server #1 that is to connect to a database residing on Server #2. Thus far, each attempt made results in an error that the database "is already opened exclusively by another user, or you need permission to view its data." Be advised that I am experienced in working with data sources when the database resides on the same server.
There is no problem creating a datasource on server 1 that references a database on server 2. But you will have to check the permissions on server 2 to make sure server 1 can connect. I suppose the error message is telling you as much.
-
OSB: Cannot acquire data source error while using JCA DBAdapter in OSB
Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PMHi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
<connection-properties>
<properties>
<property>
<name>xADataSourceName</name>
<value>jdbc/SOADataSource</value>
</property>
<property>
<name>dataSourceName</name>
<value></value>
</property>
<property>
<name>platformClassName</name>
<value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
USING TEMPLATE IN A DIFFERENT DATA SOURCE BUT WITH THE SAME GL QUBE
Hi, I want to chance connection in a SV Workbook to another data source. As we are having several test instances I need to be able to use the same Query workbook on different instances.
I've not been able to reproduce the steps to get the SV to ask for the new instance/source.
Below is what I did before but can't get to work again. Please advice
1. Open Excel and Open the SV Template you want to use that containing a different Shared URL (You can check this with (T) Smat View > Sheet Info. Login as User/PW: Casey.Brown/<weekly PW>
2. Make sure SV Options Shared Connection URL is set to point to the new instance SV > Options > Advanced > Shared Connections URL, for example 'https://fapXXXX-bi.oracleads.com/workspace/SmartViewProviders' (B) OK
3. Open Smart View Panel Navigator > Open > Smart View Panel
4. Select a 'Recently Used' connection in the Panel that points to the new instance. If you don't have it create one by connecting to your new instance and then Disconnect All.
5. In the Login to Fusion Applications window login as User/PW: Casey.Brown/<weekly PW>
(B) Sign In
NOTE: You have to click on button Sign In. You cannot press enter on keyboard as this makes the login window to pop up again. This is a known issue.
6. In the Connect to Data Source pop up window login as User/PW: Casey.Brown/<weekly PW>
(B) Connect
A pop up window 'Smart View' will pop up: 'The worksheet contains data from prior operation. What do you want to do with the contents of the sheet?
-> Clear sheet contents and POV
-> Reuse sheet contents only (Free operation will take place, existiong POV will be lost.)
-> Reuse sheet contents and POV (New ad hoc connection/Smart Slice must be consistent wit existing contents.)
7. Select 'Reuse sheet contents and POV
Depending on seeded data member changes you may receive 'Input Grid contains unknown Memebers' pop up window.
(B) OK
If you get above you need to correct unvalid members.
For example removing Budget-Budget and replace it with Budget- for the Scenario dimension. Then you will be able to use the sheet with the new data source.
Please advice on what step is needed to get the system to provide the pop up window 'Smart View': 'The worksheet contains data from prior operation. What do you want to do with the contents of the sheet?
Thanks,
Max.You can only sync with one iTunes library. However, you can manage music and videos among different computer/iTunes libraries. See:
Using iPhone, iPad, or iPod with multiple computers
If you want to change syncing computers see:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
If all the media is in the iTunes library of the second computer then you can omit the transferring media steps. -
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
Data source executive could not be found
Hello there, I have recentley did my first dynamic website
using coldfusion MX 7. After I uploaded all the files in the server
of godaddy.com on a window platform which supports cfm, I had
realised that all the DSN routes were still
C:cfusion7\wwwroot\database\executive.Users... so I changed all the
tags to D:\Hosting\executivemalta\database\executive.Users....
Unfortunatley I keep on receiving the error Data source executive
could not be found! I have also created an access database from the
godaddy control panel and located the database to a folder called
accesscf and changed the DSN route as instructed by godaddy.
Unfortunatley that didn't even work. Could somebody out there be
generous enough to help me solve this problem? The following is the
error:
Error Occurred While Processing Request
Data source executive could not be found.
The error occurred in D:\Hosting\executivemalta\index2.cfm:
line 4
2 : <cfset MM_redirectLoginSuccess="../homepage.cfm">
3 : <cfset MM_redirectLoginFailed="../failed.cfm">
4 : <cfquery name="MM_rsUser"
datasource="#Request.DSN#">
5 : SELECT Username,Password FROM
D:\Hosting\executivemalta\accesscf\executive.Users WHERE
Username='#FORM.username#' AND Password='#FORM.password#'
6 : </cfquery>
DATASOURCE executive
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.1.4322)
Remote Address 212.56.128.21
Referrer
http://www.the-executive.biz/index2.cfm
Date/Time 08-Aug-06 11:17 PM
Stack Trace (click to expand)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
java.sql.SQLException: Data source "executive" not found.
at coldfusion.sql.DataSrcImpl.validate(DataSrcImpl.java:90)
at coldfusion.sql.SqlImpl.validate(SqlImpl.java:203)
at
coldfusion.tagext.sql.QueryTag.doStartTag(QueryTag.java:443)
at
cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:210)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)Hi,
I updated Sources\SXS with fresh files and now it looks like it works?????
/SaiTech -
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
Financial Reporting - Planning 11.1.2.1 Data Source
We are trying to do salary planning, specifically new hire planning at an employee level. Is it possible to have an account of data type text that users could input into a form, and then build reports in Financial Reporting Studio that would display that text? I know there is an ADM driver that allows Financial Reporting Studio Data Sources to use Planning as a data source, but I wanted to survey for input on if and how well that works.
That's exactly what I did last year. Business wanted to see the Job description (they entered it on the form) of the new hires in a report.
In Workspace, create a Planning datasource and when you create your report, map your report to the Planning datasource.
You just need to login to Workspace > Explore > Tools > Database Connection Manager > New > Select Planning as the Type.
Cheers,
Mehmet
Maybe you are looking for
-
How do I create forms that people can complete in more than one sitting i.e. save and submit?
Hi, I have just bought formscentral and need advice to achieve my objectives: Required: Customer can part fill form, save and complete later on and submit for us to capture the data. Customer can save or can access their completed form, as we need th
-
dose anyone know how to get iphone 4 with ios 7.1 to sync to itunes
-
My iWeb page works on Chrome but not Safari
Hello out there in Cyberland... I need some assistance...My Site (which was created in iWeb 3) does not completely work in Safari but works like a charm in Chorme. My Blog Page "Projects" will load ocassionally but if you go back to it after viewing
-
Hi, I have following queries related to Flash/Flash Media Server: a) The ITU (International Telecommunications Union) has come up with different standards and protocols for videoconferencing e.g. H.323, H.320 etc. Of these, H.323 is the standard for
-
We are using the following java to write a PL/SQL generated xml clobs to the file system. The help in this forum has been priceless. At this point the xml filesare being produced but have character issues. I am guessing it is basic JAVA and yes I am