File data source not found with guest login???

Hello everybody,
i'm working with BIP 10.1.3.2.1 on Win2003/Tomcat.
Everytime if i call a report with a file data source directly via url or in the gui via guest login i get the following error message: "File data source not found: <file data source name>".
If i use a login in the gui which have the explizit permision to use this data source then there is no problem. Well at this point u might say then use this account, but - if i call a similar report with a database data source directly via url or guest login in the gui everything works fine. So, where is the point? Any ideas?
Best regards
Ralf Kanis

Hi guys,
I'm running into exactly the same issue. The problem seems to occur only when the report being accessed by guest is a file data source. The only other option I could think of is setting up SSO for BIP and the application issuing the URL to the report.
Could'nt find anything else in the documentation or known issues list that might fix this without having to setup Single Sign On. Any further luck with your investigation? I'd appreciate any feedback.
Thanks
Jonathan Cruz

Similar Messages

LDAP Config File - data source not initialized

Hi,
We have altered our LDAP config xml file to deal with an LDAP with multiple branches. This was done previously and was working fine. We have just changed again as another branch was added. Now if some enters the wrong password on the login screen they get this error message
Unknown message (ID = data source CORP_LDAP_CONSULTANTS not initialized
rather then the usual try again message. Looking in the ume logs there are also lots of warnings about the new data sourse id (CORP_LDAP_CONSULTANTS)not being initialized. And we also can no longer add new groups or users.
Any thoughts?
<b>Think we may have fixed that problem. Wrong authorizations? But now we get a whole new problem. During startup of portal our error_logs get a whole series of messages about NameNotFoundException around groups and users. Looking closely some of the user domains don't even exist in the LDAP any more.
Also when we try and add a user we get an error saying "PersistanceException: No Data Source feels Repsonsible for principal!"</b>
ANY PEARLS OF WISDOM
We are on EP6 SP2
Message was edited by: Luke Collier
Message was edited by: Luke Collier

Hi guys,
I'm running into exactly the same issue. The problem seems to occur only when the report being accessed by guest is a file data source. The only other option I could think of is setting up SSO for BIP and the application issuing the URL to the report.
Could'nt find anything else in the documentation or known issues list that might fix this without having to setup Single Sign On. Any further luck with your investigation? I'd appreciate any feedback.
Thanks
Jonathan Cruz

Ctbw data source not found in source system

hi,
by reading and posting couple of threads i was finally able to create a data source in ctbw
0MATERIAL_ATTR 800 001 MARA ATTR 1CL_OMAT002
so i went to rsa3 and tried to test this data source 1CL_OMAT002
i am getting error in this way
<b>DataSource 1CL_OMAT002 is not defined in the source system</b>
can anyone suggest me how to proceed further
and also if the above problem is resolved what should i do in bw side
should i replicate 0MATERIAL_ATTR or 1CL_OMAT002 or both?

Hi,
Have you generated the data source after creation.
in CTBW you will have to click on "generate data source" after you have created and saved the data source.It will activate all the classes used in that data sources.
Once done go to RSO2 and give your data source name there and see if this data source appears there with it's field or not...if not then your data source is not getting generated properly.
Try this and once successful then go to RSA3 and try to extarct data.
Thanks

0PROD_HIER_ATTR data source not found in the BI content

Hi,
we are trying to load product hierarchy data into sap bi,related to sd,but we dint find any standard data source related to 0PROD_HIER_ATTR in rsa5,but we can find the stadard business content in bi side to the same.
we can only find 0PROD_HIER_TXT but not the attribute.
we have ECC 6.0 and sap netweaver 7.0 Enahnce pack 1.
what would be the approach in loading product hierarchy related to sd,pls suggest me with a work around process.
Thanks in advance.

Hi,
Check these:----
Load Product Hierarchy from Flat file (xl sheet)
Hierarchy using a flat file for a master data load.
http://help.sap.com/saphelp_nw70/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
/people/sergedaniel.knapp/blog/2010/12/02/the-new-sap-netweaver-bw-730-hierarchy-framework
The first and second links may be helpful.....
Regards,
Suman

Data Source not found

Hi EveryBody
I deploy jtds sql server2000 driver successfully
then I deploy datasource providing drivername successfully
after that I am using it in my web/hibernate application.
I use it in hibernate.cfg.xml file like
<property name="connection.datasource">java:comp/env/YTSQLS2K</property>
where "YTSQLS2K" is the name of deployed datasource.
When I start to deploy the application on the SAP jee 5 Server. The exception is produce in the file in following location
C:\SAP\SS1\JC00\j2ee\cluster\server0\log\defaultTrace.0.trc
Caused by: org.hibernate.HibernateException: Could not find datasource
        at org.hibernate.connection.DatasourceConnectionProvider.configure(DatasourceConnectionProvider.java:56)
        at org.hibernate.connection.ConnectionProviderFactory.newConnectionProvider(ConnectionProviderFactory.java:124)
        at org.hibernate.connection.ConnectionProviderFactory.newConnectionProvider(ConnectionProviderFactory.java:56)
        at org.hibernate.cfg.SettingsFactory.createConnectionProvider(SettingsFactory.java:366)
        at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:60)
        at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:1881)
        at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1174)
        at com.yousifi.hibernate.util.HibernateUtil.<clinit>(HibernateUtil.java:21)
        ... 47 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of YTSQLS2K.
        at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:650)
        at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:344)
        at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:266)
        at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:286)
        at javax.naming.InitialContext.lookup(InitialContext.java:351)
        at javax.naming.InitialContext.lookup(InitialContext.java:351)
        at org.hibernate.connection.DatasourceConnectionProvider.configure(DatasourceConnectionProvider.java:52)
        ... 54 more
Is there any entry require in the web.xml file or anywhere else to find "YTSQLS2K"(DataSource).
Thank You,
Best Regards,
Syed Saifuddin

Hi EveryBody
Now the datasource is found but a jdbc transaction error occur when I deploy the application on the server .
Below is the stack trace
#SAP J2EE Engine JTA Transaction : [03bfffffffd3a000ffffffc0]####Application [13]##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.dbpool.exceptions.BaseSQLException: Cannot commit transaction from this connection of "YTSQLS2K" DataSource. This resource participates in a local or distributed transaction.
#SAP J2EE Engine JTA Transaction : [03bfffffffd3a000ffffffc0]####Application [13]##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.dbpool.exceptions.BaseSQLException: Cannot initiate transaction from a connection of "YTSQLS2K" DataSource. Local or distributed transaction has already started.
#SAP J2EE Engine JTA Transaction : [03bfffffffd3a000ffffffc0]####Application [13]##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.dbpool.exceptions.BaseSQLException: Cannot commit transaction from this connection of "YTSQLS2K" DataSource. This resource participates in a local or distributed transaction.
Any idea about it
I use the jdbc version in datasource <jdbc-1.x>
is there a need to replace it with <jdbc-2.0>
Thank You
Syed Saifuddin

Data source not found and no default driver

Using java application with JDBC to communicate with ACCESS database. Using User DNS, able to commuicate with DB using the same PC.
The application is been shared therefore people in the network will be abled to use the application. Error(subject) appear when trying to use other PC to use the application.
Anyway to solve it??

have you created DSN on those network systems pointing to the database...
to use the database from the network system you have to create
DSN on every system you want your database to be used from
like if ur DSN name "myDSN" that points to UserDB.mdb database stored on ABC system then you need to a DSN named "myDSN" on every network system...
select Network option to point to network databse...
the best way to do this is..
Create an RMI/Socket server that acts as middle tier between user system and databse.
by this way u don't have to create DSN on every sytem...

Source Not Found Error while Debugging

Hello,
I get annoying Errors while debugging a midlet. I reinstalled all programms an created a new midlet suite + midlet but the error is still there and the Midlet doesnt start.
i got Eclipse Version: 3.2.2, Eclipse ME 1.6.6, the newest WTK 2.5 and java.vm.version=1.6.0-b105.
I configured everything like www.eclipseme.org says it would be correct.
Running a Midlet works fine.
The bug opens an Helper.class file which says:
Class File Editor: Source not found: "The Jar of this classfile belongs to the container J2ME library [ Sun Java (TM) Wireless Toolkit 2.5 for CLDC/MediaControl]. To configure the source attachment, go directly to the corresponding configuration page (For example for JRE go to 'Installed JRE#s page in references).
Any clou how to fix this?? I need to debug my midlet :-/
THANKS!
Byby
pako

Hi,
I just had the same problem and navigated to this page here in hope for a solution...
However I've solved the problem now. On Eclipse, do the following.
1) Right-click on the added Jar-file (which is producing the problem)
2) On the popup-menu choose "Build Path" and "Configure Build Path..."
3) On the opening preference window, click the checkbox of the Jar
This is probably necessary because the jar has to be exported such that the simulator is able to execute it.
Greets,
Juri
http://juri-strumpflohner.blogspot.com

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

J2EE Engine startup page error: File [main.jsp] not found in application..

Hi Guys,
I have just uninstalled and reinstalled SAP Netweaver 7.01 portal. The uninstall was clean and the reinstall also went without any errors.
However, immediately after this, when I open http://<host>:<port> I get the following error:
404 Not Found
The requested resource /main.jsp is not available
Details: File main.jsp not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
If, instead, I open portal (http://<host>:<port>/irj), it works fine.
Anybody has any idea why this has happened and how can I resolve this issue?
Thanks,
Shitij
Edited by: Shitij Bagga on May 5, 2010 9:36 AM
Edited by: Shitij Bagga on May 5, 2010 9:37 AM

Hi Anil,
I don't see how this note is relevant here. It is just the j2ee engine start page which is not opening. If I go straight to the systeminfo page or the portal login page, they are all working.
Any experience on this issue with that note u suggested? Please share.
Thanks,
Shitij

Error when deploying JDBC file data source for J2EE agent in weblogic

Hi ODI experts!
we're using ODI 11g and we've installed J2EE agents on weblogic. We need to configure a connection pool within weblogic for a file data source. Thus, we've added snpsFile.jar (that was shipped with ODI 10g...) to the weblogic config so that we can configure a JDBC connection to file.
As we validate the config, an error occurs (see below):
Obviously, driver is found but cannot be deployed.
####<4 août 2011 09 h 39 CEST> <Error> <Deployer> <ppdlodi001> <SRVPPDODI_001> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c53bfd6260db74bb:-485a441a:13193b42397:-7ffc-0000000000000027> <1312443551325> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1312443550020' for task 'weblogic.deploy.configChangeTask.6'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.common.ResourceException: com.sunopsis.jdbc.driver.file.a.i
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:263)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1110)
at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:147)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:386)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:326)
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:254)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks in advance for your help.
Fredd.

Hi!
Some information: I found this website [http://gerardnico.com/doc/odi/webhelp/en/refmanual/connexion/jdbcdriversample.htm] explaining that the 'old' snpsFile.jar driver was deprecated and that a new one was existing... but I can't find it anywhere!
My questions are:
- Can the problem (original problem. See initial post) be due to driver version?
- Does someone know where to find this 'new' driver?
Thanks for your help.
Fredd.
Edited by: fredd2 on Aug 5, 2011 10:04 AM
Edited by: fredd2 on Aug 5, 2011 10:07 AM

Adding file data sources

Hi,
is it possible to define folders as file data source within the bi publisher, which are NOT located on the server where the bi publisher is installed?
how can I solve this?
BR & thank you,
Lena

>I have tried several guides on the topic and they all
>lead me to making a page called resultspage.html.
I can't imagine why. An html page won't work - your page needs an .asp extension.
>Then I am supposed to go to Window > Bindings, click on +, and something called
>Recordset should be available for me to select. The problem is that there is no
>Recordset when I follow these instructions.
You'll never see that appear on an .html page. Change it to .asp and see what happens.
However, you have other problems. As far as I know, Access 2007 accdb database are not supported at all in DW. You can still build the site in DW, but you won't be able to use DW server behaviors and will have to code all of your scripts by hand. Or, you can try saving your file as an mdb.
In reality, I've never found that DW server behaviors good get me 100% of what I need on a project - so you'll have to learn ASP/VBScript and SQL anyway.
Also, what is the expected volumn on this site? Access databases do not handle concurrent users well.

LineChart: file type was not found

Hello community,
I tried an example of adobe where LineChart is used for displaying a chart, it can be found there: http://livedocs.adobe.com/flex/3/langref/mx/charts/LineChart.html#includeExamplesSummary
When I tried to build the example with FlashDevelop I got the error message
file type was not found or was not a compile-time constan: LineChart
The same for AreaChart. Can someone help me with that? I tried the Flex SDK 3 and also the Flex SDK 4.
With kind regards
Sebastian

The charting components are not a part of the open source SDK, the charting
components come along with Flex Builder Pro

Error 1311 source not found

All Basis,
Any idea on this,
When tyring to open a Excel from SAP, the Error 1311 source not found throws up.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Source not found: The source attachment does not contain the source........

Source not found: The source attachment does not contain the source for the file ClassLoader.Class
Hey,
I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
Thanks in advance for your thoughts,
Struggling to Run

Ok...after I thought everything was going well enough.... problems are arising.
Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
with the two environments installed i thought i was ready fro the next step.
I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
1___________
java.lang.NoClassDefFoundError: couponCounter/CouponCounter
Exception in thread "main"
2__________
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
     Syntax error, insert "}" to complete ClassBody
     at BensCalculator.main(BensCalculator.java:112)
Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
Thank you

Org.apache.tomcat.TcpConnection source not found error.

Hi,
When I tried to remotely debug a servlet with Sun's J2EEServer, instead of stopping at the breakpoint the Jdev31 stopped at this line:
//JDeveloper API Decompiler STUB ...
and when I pressed F8 a messagebox appeared:
org.apache.tomcat.TcpConnection source not found.
I think that I have missed someting installing the JDev.
Your prompt help is higly appreciated,
Reza

Hi,
I just had the same problem and navigated to this page here in hope for a solution...
However I've solved the problem now. On Eclipse, do the following.
1) Right-click on the added Jar-file (which is producing the problem)
2) On the popup-menu choose "Build Path" and "Configure Build Path..."
3) On the opening preference window, click the checkbox of the Jar
This is probably necessary because the jar has to be exported such that the simulator is able to execute it.
Greets,
Juri
http://juri-strumpflohner.blogspot.com

File data source not found with guest login???

Similar Messages

Maybe you are looking for