Data Source - Out of boundaries

We received a System message from sap when adding a new Sales Order and this is the first time I see
this message : Data Source - Out of boundaries
Is anybody saw this message before ? If so what it is ?
SAP 2007 SP01 PL08

You may check these threads first:
adding row to an existing dbdatasource
Matrix values are not displayed
Thanks,
Gordon

Similar Messages

Weblogic Server 10.3.6.0.8 one of data sources failing while other 6 not

Hello,
I have 7 data sources connecting to the same database schema. After I upgraded the environment (production) day before yesterday evening I noticed one of the data sources start failing with exception below:
"Connection test failed with the following exception: weblogic.common.resourcepool.ResourceUnavailableException: No resources currently available in pool ePayBatchDS to allocate to applications.
Either specify a time period to wait for resources to become available, or increase the size of the pool and retry.."
The data source capacity size is Min:1 Max:30, I increased to be as 1-50, after change it is worked for 15 minutes then it back again giving the same error message above. Please not that I have in production two servers as high availability approach however I upgraded one of them till now only and the same data source in the old server not failing.
Please advise.
Old Environment Specifications:
Weblogic Server version: 10.3.4.0
OS: Sun OS10 SPARC 64-bit
JDK: 1.6.0 update 32 64-bit
New Environment Specifications:
Weblogic Server version: 10.3.6.0.8
OS: Solaris 11.1 (64-Bit Mode) SRU 20 (18 June 2014 patchset).
JDK: 1.7.0 update 55 64-bit
Thanks,
Mohd.

Hii,
No resources currently available in pool ePayBatchDS to allocate to applications.
This exception cleaarly shows the connection are not available to allocate to ePayBatchDS datasource.
As you said there are altogether 7 data source out which six are working and one is not.
In general if you are creating a datasource and providing a connection pool size we should consider the number of connection available or allowed at the database side as well.
Please cross check at the DB side the number of connection available and based on that try to tune the connection pool size in your data sources.
Regards,
Abdul

Generic Data Source Creation Problem....URGENT!!!!!!!!!!!!!

Hello BW Experts...!
I need to create a Generic Data Source out of a table called VBSEGK... I was trying in the usual way with RSO2 , but when I press save button after entering the Table name the following error is coming:
" Invalid Extract Stucture Template VBSEGK of Data Source ZPARK_01"
and when I click on the error message its showing
Diagnosis
You tried to generate an extract structure with the template structure VBSEGK. This operation failed, because the template structure quantity fields or currency fields, for example, field DMBTR refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
VBSEGK is a standard table , so I cant change the Table structure. Can any one give me some idea of how to create Data source with this table ASAP ASAP please....
Please ask me questions if you didnt get this...
thanks

Hi Harish,
Please check OSS note 335342.
Symptom
The creation of a generic DataSource which is extracted from a DDIC view or a transparent table terminates with error message R8359:Invalid extract structure template &2 of Datasource &1
Other terms
OLTP, DataSource, extractor, data extraction, generic extractor
Reason and Prerequisites
The problem is caused by a program error.
Solution
The table or view used for extraction must have currency and unit fields within the field list of the table/view for all currency and quantity key figures.Otherwise the consistency of the extracted data cannot be ensured.To make the generation possible, check whether all key figures of your table refer to unit fields that are within the field list.If this is not the case, there are two possibilities:
1. A table is used for extraction.
Create a view in which you have a currency / unit field contained in the view for each key figure. The currency / unit field from the table must be included in the view to which the key figure actually refers.
Example:
Field WKGBTR of table COEP refers to the unit field WAERS of table TKA01. In a view that contains field COEP-WKGBTR, table TKA01 and field WAERS must be included in the field list.
If the currency or the unit a key figure refers to is not located in a table but in a structure, the key figure has to be removed from the view and read via a customer exit (see below). Structures cannot be included in a view.
ATTENTION!! Often the key of the table in which the referenced unit is located, does not agree with the key in the table with the corresponding key figure. In this case, the join condition of both tables is not unique in the view definition, that means for each key line of the table with the key figure, several lines of the table with the unit may be read: the result is a multiplying of the number of lines in the view by a factor corresponding to the number of lines that fit the key figure, in the unit table. To be able to deliver consistent data to a BW system, check whether the unit of the key figure in question should always have a fixed value. If yes then you can determine that in the view definition via 'GoTo -> Selection conditions'. If no, then you must proceed as follows:
a) Remove the key figure from the view
b) Define the DataSource
c) Enhance the extract structure by key figure and unit for each append (Transaction RSA6)
d) Add the key figure and the unit in a customer exit
2. A view is already used for the extraction
If it is not possible to obtain a unit of measure from a table on which the view is based, the unit field must be deleted from the field list.
A note in relation to the upward compatibility of BW-BCT InfoSources: BW-BCT 1.2B was not yet able to check units and currency fields. For this reason, it is possible that InfoSources which were defined in the source system as of BW-BCT 1.2B must be redefined as of 2000.1 in the manner described above. However, checks are absolutely essential for the consistency of the extracted data.
Regards,
Praveen

I am trying to setup a data source for postgresql with cf10 update 14. i get a time out error retruned in less than 2 seconds. I setup a data source for MS SQL 2005 no problem.

I need a little help, what have I done wrong or not done?
Here is the error message that is returned;
Connection verification failed for data source: Archuleta_xxxxxx
java.sql.SQLException: Timed out trying to establish connection
The root cause was that: java.sql.SQLException: Timed out trying to establish connection
any ideas would be appreciated.

I see this error in your output:
2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
I'm not across what the EBS recommended setting for this is, or if there is one. But try running:
ulimit -n
... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p. See Linux & Java tips: Too many open files .

Shared Data Source with prompted credentials - errors out.

Using Data Tools (VS 2010) to build report.
Have built a simple report while trying to diagnose this issue. This report is created in a project that was originally built in BIDS2008 and migrated to Data Tools 2010. This project contains an original shared dataset that does NOT
error out.
Report contains
     1) shared data source with properties set to prompted credentials.
     2) shared dataset using data source above
     3) 2 parameters (month and year)
     4) Report uses shared dataset
     5) 2 text boxes in the report body to display the parameters values.
When I try to preview this report I get the error:
     The execution failed for the shared data set "xxx"
     Cannot create a connection to data source 'Data source for shared dataset'
     Security processing failed with reason "3" ("password missing")
Now, if I changed that same shared dataset to use a static login and password; the report renders fine.
What is going on???

Hi RoseNeedsAVacation,
When you use shared data source with "Prompt for credential" option, please use SQL Server login credential to u view the report in BIDS or SSDT report designer environment.
Note: The shared data source will automatic switch to SQL Server authentication mode if we use "Prompt for credential" option.
After you deploy your report and shared data source to report server, please remember to configure your shared data source to use "Credentials supplied by the user running the report" option. Furthermore, select "Use
as Windows credentials when connecting to the data source" checkbox if the credentials that the user provides are Windows Authentication credentials. Do not select this check box if you are using database authentication (for example, SQL
Server Authentication).
For more information, please refer to the article below:
New Data Source Page (Report Manager):
http://technet.microsoft.com/en-us/library/ms180077(v=sql.100).aspx
Regards,
Elvis Long
TechNet Community Support

How to Find out the Name of the Table in Data Sources

Hi All,
How Can i find out the table names used in data Sources.
For EX. Suppose I want to find out the table Names in R3 Used In GL Data Source 0FI_GL_4.
Thanks in Advance.
Vaibhav A

Hi,
Usefull link:
https://wiki.sdn.sap.com/wiki/display/BI/BW%20SD%20MM%20FI%20DATASOURCES
Regards.

Unable to generate Power View report out of Multidimensional report data source

Hi,
I have created 'Report Data Source' connection to point to Multidimensional cube on Share Point site. But when I try to create a new Power View report out of it, I get following error message :
"An error occured while loading the model for the item or data source 'http://*********/PowerPivot Gallery/TestCube.rsds'. Verify that the connection information is correct and that you have permission to access the data source."
I can see following message in the <moreInformation> section :
<Source>Microsoft SQL Server 2012 Analysis Services</Source><Message>Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later.</Message>
Following are the System configurations :
1) SSAS : SQL Server 2012 + SP2 (version 11.0.5058)
2) Share Point 2013
As mentioned in one of the MSDN documents this configuration supports creation of Power View reports on multidimensional cube.
Can any one suggest what might be the issue?
Thanks in advance!

Hi Dipti,
According to your description, you get the connection failure when creating a power view report, and it throws information "Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with
VERSION restriction of 2.0 or later." Right?
Based on the error message, the issue should be the SSRS on sharepoint metadata version mismatch when sending to SSAS. There's someone mentioned in a similar thread that this issue can be solved by installing the full package of CU4 for SP1.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/133558cd-ffc8-4608-ae45-fdff01770c6d/powerview-sql-2012-sp1-cu4-cannot-connect-to-dimensional-metadata-version-11?forum=sqlreportingservices
Even you already have SP2 installed, it supposed included CU1~CU9 for SP1. However, it has reported that SP2 doesn't fix all bugs which supposed to be fixed in CU for SP1.
SQL Server 2012 Service Pack 2 is available - but there's a catch!
So please re-install the full CU4 for SP1, restart the services and try again.
Best Regards,
Simon Hou
TechNet Community Support

How to find out data source for a datawindow?

I have a datawindow and I want to identify it's datasource.
I open this datawindow in pb. then in design menu, Data Source is disabled. It means not direct sql
Then I go to Column Specific(small window), and right click on any space, in the popup menu, there is no 'Stored Procedure...'. It means not procedure.
(see screeshot attached)
then how to find out the data source for this datawindow?

Hi Kent;
1) I would use the RHMB on the DWO in the System Tree and select the "Edit Source" option.
2) In the DWO source, locate the "TABLE ( ...." line
3) If the next major line starts with "DATA(...." then this is an external DWO.
4) If the next major line starts with "Retrieve(...." then this is a normal DWO (SQL or SP based).
5) If the next major line starts with "webservice=(WSDL...." then this is a Web Service based DWO.
Note: if your DWO has no #3, 4 or 5, then its external.
HTH
Regards ... Chris

Transaction on Oracle 9i data source connection times out before JTA transaction

Hello,
I have a MDB with a long-running transaction (3600 second timeout).
In the MDB, I make a call to another EJB that has its transaction
attribute set to NotSupported (I do this because I need
non-transactional semantics in the called method).
If the EJB call take more than about a minute to complete, then I get a
datasource error when using the data source in the MDB after the return
(see error at bottom). However, if the call completes quickly, then I do
not get this error. It seems like the datasource connection somehow
times out, but I don't see where I can change this timeout.
pseudocode:
// timeout set to 3600 seconds
transactional MDB onMessage() {
// receive connection from Oracle BEA driver
// myEJB performLongOperation has transaction attribute
// set to NotSupported
String result = myEJB.performLongOperation();
// use connection from Oracle BEA driver
If the performLongOperation takes more than about a minute, then I get
the following error when using the connection after the operation:
Caused by: java.sql.SQLException: XA error: XAER_NOTA : The XID is not
valid start() failed on resource 'Oracle IDENT Connection Pool':
XAER_NOTA : The XID is not valid
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occurred. Native Error: 24756
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:218)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at
weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:185)
at
weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.jav
a:80)
at
weblogic.jdbc.wrapper.Connection.createStatement(Connection.java:297)

Thanks for the reply.
I don't have contract customer support access with BEA, and thus I can't
download the patch. Is there any other workaround for this?
Thanks
Slava Imeshev wrote:
Steven,
Please check this:
http://www.viewtier.com/newsgroups/thread.jspa?threadID=20&tstart=0
Hope this helps.
Regards,
Slava Imeshev
"Steven Ostrowski" <[email protected]> wrote in message news:40cf35cc@mktnews1...
I have a MDB with a long-running transaction (3600 second timeout).
In the MDB, I make a call to another EJB that has its transaction
attribute set to NotSupported (I do this because I need
non-transactional semantics in the called method).
If the EJB call take more than about a minute to complete, then I get a
datasource error when using the data source in the MDB after the return
(see error at bottom). However, if the call completes quickly, then I do
not get this error. It seems like the datasource connection somehow
times out, but I don't see where I can change this timeout.
pseudocode:
// timeout set to 3600 seconds
transactional MDB onMessage() {
// receive connection from Oracle BEA driver
// myEJB performLongOperation has transaction attribute
// set to NotSupported
String result = myEJB.performLongOperation();
// use connection from Oracle BEA driver
If the performLongOperation takes more than about a minute, then I get
the following error when using the connection after the operation:
Caused by: java.sql.SQLException: XA error: XAER_NOTA : The XID is not
valid start() failed on resource 'Oracle IDENT Connection Pool':
XAER_NOTA : The XID is not valid
javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
Error Occurred. Native Error: 24756
at
weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
urceInfo.java:1075)
at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
sourceInfo.java:1007)
at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
ourceInfo.java:218)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
250)
at
weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:185)
at
weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.jav
a:80)
at
weblogic.jdbc.wrapper.Connection.createStatement(Connection.java:297)

Data Source in RDS Dataview times out in FlashBuilder 4

When I expand the Table icon in my oracle data source in RDS Dataview, after a few seconds, it dispays 'Read Timed out' error. However I am able to retrieve data using the RDS Query Viewer.
Here is the entry in myapp.xml located in C:\lcds\tomcat\conf\Catalina\localhost.
<Resource name="jdbc/myoracle" auth="Container"
              type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@vahpdv02.server.com:1631:SOXDEV"
              username="sox_owner" password="sox123" maxActive="20" maxIdle="30"
              maxWait="-1"/>
Any ideas?

Hi Pradeep,
Can you please try the following:
1. Check if the server settings are pointing to the web application which has RDS configured
2. Make sure you restart the server once you uncomment the RDSDispatchServlet in web.xml
3. Make sure the BlazeDS version you are using BlazeDS 4.0 and above. If not, see if this article helps http://sujitreddyg.wordpress.com/2009/06/01/using-flash-builder-4-for-earlier-blazeds-buil ds/
4. Try sending a request to http://<server-name>:<port>/<WebApplicationContext>/CFIDE/main/ide.cfm from your browser. You should get an error saying "GET" method is not supported. If not, probably the RDSDispatchServlet is not properly configured.
Hope this helps.

Data View and Data Source buttons Greyed out

I have Site Admin permissions on an On Prem SharePoint 2013 site.
In SharePoint Designer 2013 the Data View and Data Source buttons are greyed out.
Can anyone shed some light as to why this is occurring?

Hi grantzre,
Could you provide a screenshot about the location you want to insert the Data View web part and Data Source?
I think you may put the mouse cursor in the incorrect place to add the data view web part, please try putting the cursor before the tag </ZoneTemplate> and see if "Data View" button is enabled, then you can insert an empty
dataview web part and then insert the data source in tag <DataSources> by clicking ribbon button "Data Source" (also click the ribbon button "Parse HTML" of the page if needed).
Thanks
Daniel Yang
TechNet Community Support

Publisher report with web service data source timing out in browser

I have a report which calls a web service. Depending on parameters passed the data can take 5+ minutes to return. The report often times out in the browser before data is returned.
Is there a BI Publisher or OBIEE setting where i can extend the timeout setting?
easy points!

Think I found it in report data source settings, nevermind!

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

WebLogic 11g data source connection pooling failed with IO error:socket read timed out.

Hi all,
We encountered IO Error: Socket read timed out( <Received exception while creating connection for pool "DS_1": IO Error: Socket read timed out> ) during the creation of data sources in WebLogic 11g. Manual data source testing seems to indicate intermittent connection and the server seems to take a long time to start up with multiple IO errors. We increased the timeout at the database side but it does not seems to help. The database is 11g (11.2.0.3). The database services and listener are up which does not indicate that the database instance is down.

This particular error means your database is down and socket is timedout. Or the query takes so long that the reader timedout -- unlikely.
Also, the general weblogic socket write errors, which you might see sometimes means that the client got disconnected before the server wrote results back. This is harmless

CF data source timed out

I have a Win 2008 64 bit server with CF9 32 bit. I have 2 ODBC socket data sources that were working just fine. A change of a static IP address of one of the 2 remote networks caused me to change the IP address of the TelemateSC data source. I used the Windows ODBC data source administrator to change it. Using CF admin to verify the data source gets a time out error. The other data source, TelemateTulsa, still works just fine. The TelemateSC data source tests fine in Windows ODBC data source admin but not under CF. I changed the TelemateSC data source IP address to use the same one as the TelemateTulsa data source and it still times out under CF.

My first suggestion would be to use CF9 64 bit. We had all sorts of issues with the 32 bit version including various freezes and timeouts that we think were caused by inadequate or poorly implemented memory management. A simple query returning more than 4Mb of data will freeze the service. My guess is that this was not a CF issue, but a Java issue. But since CF9 runs under Java, CF gets the black eye.

Data Source - Out of boundaries

Similar Messages

Maybe you are looking for