Database restore from different Database Sid

I have installed sap ecc6 sr3 on db2 version 9.1 fp5 which is running on WIn2003 Enterprise x64 edition which is working fine. It is my Quality server Database Sid Q11.
Now i want to restore database from Development server D11 (offline backup) to quality server Q11.
Development server database Sid is D11.
How to restore from Different Sid. (In DB2 database).
Please tell me how to restore database from another Sid.

Hi,
what you have to do is a so called "redirected restore".
The recommended way to that in an SAP-DB2 environment, is to use the tool brdb6brt shipped together with the SAP kernel. For details how to use this tool refer to the DB2-UDS Database Administration Guide.
kind regards
Thomas

Similar Messages

What permission is needed for a login to access the restored database(backup from different server)

what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.

Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Data from different databases in the same report.

Hi Everyone,
I am trying to build a reconciliation report in which I need to show the data from the source and target, side by side.
Source and target are both different databases, although being oracle only
Whenever a new data model is created, it gets attached to a data source and in the report we need to choose a specific data model.
Can we have data from different databases in the same report ?

Yes, it is possible.
One way Is to use dataTemplates. There you can make queries from any number of different databases (The max I have done is 5).
It looks something like that:
<dataTemplate name="NameOfTemplate">
<dataQuery>
     <sqlStatement name="Q1" dataSourceRef="Connection1">
          <![CDATA[     select * from table1]]>
     </sqlStatement>
     <sqlStatement name="Q2" dataSourceRef="Connection2">
          <![CDATA[     select * from table2]]>
     </sqlStatement>
</dataQuery>
<dataStructure>
     <group name="RESULT1" source="Q1">
          <element name="P_FIRST_NAME" value="P_FIRST_NAME"/>
     </group>
     <group name="RESULT2" source="Q2">
          <element name="P_DATE" value="P_DATE"/>
     </group>
</dataStructure>
</dataTemplate>dataStructure is very important when you get data from different places, if you don't define those elements, then only the result from Q1 is shown.
The second possible way is to make as two different data models, each containing their own query and then set Main Data Set as concatenated SQL Data Source.
Best of luck,
Evelyn

RMAN restore from active database, ASM

I'm attempting to refresh a stage database from a prod database using RMAN restore from active database. Both are on ASM. After working through various hurdles, I've got one issue I'm a bit stuck on. I've got a handful of data files that do NOT have OMF names (ie MSTRDATA/mstrmdpd/datafile/gsa_indx instead of MSTRDATA/mstrmdpd/datafile/gsa_indx.351.714779777) and these are failing when I do the restore. The syntax I'm using in RMAN is as follows:
duplicate target database to dwstage
from active database
spfile parameter_value_convert 'dwprod','dwstage'
SET DB_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE'
SET LOG_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE';
The error message I'm getting is this:
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/21/2011 13:26:24
ORA-17628: Oracle error 19505 returned by remote Oracle server
continuing other job steps, job failed will not be re-run
Normally from what I've seen/read this error can be traced back to needing to pre-create the directories for the controlfiles etc, but since 90% of the datafiles copied correctly...
Any suggestions as to a way around this, or am I going to be forced to restore from a backupset?

This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = AUXDB)
      (ORACLE_HOME = <your oracle home>)
      (SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again

Database restore from old rman backup

Hi Friends,
My database version is oracle 10.2.0 O/s : Windows
I have a production database of an outlet. Yesterday night 11pm they have done some wrong transactions and whole stock is showing wrong.
They have taken a export backup at 9.30 pm and latest archives are there.
We have a rman backup on April-30,2008. when I am trying to restore from the old rman backup the controlfile I am unable to do it.
Can any one of you help me out.
thankyou
satya

Hi,
I have tried installing in a seperate system and restore the rman backup, as I do not have the controlfile I have taken a standby controlfile and started restoring the rman backup as the old rman backup dbid is different with the current dbid and giving me following error:
ORA-19870: error reading backup piece D:\MPOUTLET\0AJF4BM3_1_1
ORA-19691: D:\MPOUTLET\0AJF4BM3_1_1 is from different database: id=1976833331, name=JEEVAMP
ORA-19870: error reading backup piece D:\MPOUTLET\0BJF4BOE_1_1
ORA-19691: D:\MPOUTLET\0BJF4BOE_1_1 is from different database: id=1976833331, name=JEEVAMP
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 07/13/2008 12:23:23
RMAN-06209: List of failed objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece D:\MPOUTLET\0AJF4BM3_1_1
RMAN-06214: Backup Piece D:\MPOUTLET\0BJF4BOE_1_1

Select data from different database

hi,
may I know how to select data from different database?
for example,
I've 2 databases, OracleDB and OracleAR
Connect with OracleAR in SQL*Plus
select * from OracleDB.TableName
does Oracle support this kind of query?
how can I retrieve data from other database while im connecting with
other database?

Hi,
Yes, it's possible. No, your syntax won't work.
First of all you have to define a DATABASE LINK inside the DB where you are already connected (in this case OracleAR). Read docs how to do that.
Second thing is the query. It will look like
SELECT * from TableName@<NameOfDatabaseLink>Greetings,
Guido

Single query to get data from different databases

i need to capture certain fields from certain tables in database 1 and certain fields from certain tables in database 2 into one file using a single SQL statement.
i tried searching on the net
i found that dblinks can help
but iam not sure if ill be able to create dblinks in my situation which is:
i need to get data from oracle to be copied to mysql
this is not a replication acitivity, but i need certain fields from one database and certain from the other
so what iwas thinking is, if i use an sql query to get all the fields (i need around 40) from the different oracle databases and create a singlefile with one insert per select, i can then read that file into mysql
instead of creating multiple sql queries for each table and creating separate files and eventually separate tables in mysql.
can anyone help me here?
or maybe suggest another approach.
thanks

Hi,
I think dblink is the only option available to get data from different databases. It will work for your case too.
CREATE DATABASE LINK db_link CONNECT TO user_name IDENTIFIED BY password USING 'instance_name'you must have the system privilege 'create database link' to create db links. This way you can get the required data and put it in a table in oracle. But i dont know how to put this data from oracle table to Mysql.
HTH
Muneer

Help needed to insert data from different database

Hi ,
I have a requirement where i need to fetch data from different database through database link .Depending on user request , the dblink needs to change and data from respective table from mentioned datbase has to be fetched and populated .Could i use execute immediate for this, would dblink work within execute immediate .If not , could pls let me know any other approach .

What does "the dblink needs to change" mean?
Are you trying to dynamically create database links at run-time? Or to point a query at one of a set of pre-established database links at run-time?
Are you sure that you really need to get the data from the remote database in real time? Could you use materialized views/ Streams/ etc to move the data from the remote databases to the local database? That tends to be far more robust.
Justin

Fetch data from different database tables

Hi...
How can i fetch data from different database tables and put it into a internal table and then display it??? Can provide simple short codes as i'm new to ABAP. Thanks.

Hi,
Check this sample code..
TYPE-POOLS: slis.
DATA: BEGIN OF itab OCCURS 0,
        vbeln TYPE vbeln,
        expand,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
      END OF itab1.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'NETPR'.
s_fieldcatalog-do_sum    = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
DATA: s_layout TYPE slis_layout_alv.
s_layout-subtotals_text            = 'SUBTOTAL TEXT'.
s_layout-key_hotspot = 'X'.
s_layout-expand_fieldname = 'EXPAND'.
SELECT vbeln UP TO 100 ROWS
       FROM
       vbak
       INTO TABLE itab.
IF NOT itab[] IS INITIAL.
SELECT vbeln posnr matnr netpr
         FROM vbap
         INTO TABLE itab1
         FOR ALL ENTRIES IN itab
         WHERE vbeln = itab-vbeln.
ENDIF.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_keyinfo-header01 = 'VBELN'.
s_keyinfo-item01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
          i_callback_program = v_repid
          is_layout          = s_layout
          it_fieldcat        = t_fieldcatalog
          i_tabname_header   = 'ITAB'
          i_tabname_item     = 'ITAB1'
          is_keyinfo         = s_keyinfo
     TABLES
          t_outtab_header    = itab
          t_outtab_item      = itab1
     EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Naren

Query to identify the recovery catalog database name from target database

Hi,
How to get the recovery catalog database name from the registered target database?
i dont know my recovery catalog database for my target database.
I know we can use the query
select * from rc_database;
from recovery catalog database to know all the registered database with the recovery catalog but I want to know is there any way or query to identify the recovery catalog database name from target database to which the target database is registered
With Regards
Boobathi P

You can check the backup scripts which you use to backup your target database to get the catalog database name.
And check the corresponding connect string in TNSNAMES.ORA file or tnsping to get the server details of the catalog database.
Edited by: gopal on Apr 12, 2013 12:59 PM

Restore RMAN from different Database Rman backup

Hi Everybody
I am practicing Rman so I have one query that how to restore rman backup from another database.
For Example :
1. I have Rman backup of DB1 with level 0 and level 1 cumulative database plus archievelog
2. I need to import or restore Rman backup of DB1 to another database DB2.
What is the procedure for doing the above queries. Please anyone one help me out.
I have using oracle 10g r2 running in windows server 2003.
Thanks in advance.

These are the steps ; you need to write the appropiate commands for each step: Hope it helps!
1) Take appropriate RMAN backup of the database db1. Note that you should turn on the CONTROLFILE AUTOBACKUP configuration so that we have the controlfile backed up after the database backup. When we restore the controlfile on new host from this autobackup piece, it will have the information of the latest backup.
2) Create a PFILE for the destination database db2 using the database db1
3) Move the backup pieces and the modified INIT.ORA file to the new host. Starting from 10g it is NO longer compulsory to copy the RMAN backup pieces to exactly the same location on the new host as the production location.
4) Use the pfile created above to STARTUP NOMOUNT the database on the new host
5) Now invoke RMAN and restore the controlfile specifying the location where the controlfile autobackup piece is restored on this new server. You can mount the database once the controlfile is restored successfully.
6) You can skip this step if you have restored the RMAN backup pieces to exactly the same location they were backed up on database db1. If this is not the case then you need to catalog the RMAN backup pieces to make RMAN aware of thier new location on the new host. Note that CATALOG BACKUPPIECE command is available only starting from 10g.
7) Having determined the point up to which media recovery should run, start the restore/recovery using for example:
RMAN> run {
2> set until sequence 59 thread 1;
3> set newname for datafile 1 to '/new_location/system01.dbf';
4> set newname for datafile 2 to '/new_location/undotbs01.dbf';
5> set newname for datafile 3 to '/new_location/sysaux01.dbf';
6> set newname for datafile 4 to '/new_location/users01.dbf';
7> restore database;
8> switch datafile all;
9> recover database;
10> }

Select query based on joining of tables from different database is taking too long

Hi Team,
Select query on table with millions of records is taking very long time. It took 50mins, the below query is joining on multiple table from two databases DB1.dbo.Table1 contains 100 million records and also Table3 and Table4 (of different database) might
contain close to 1million records.
Select T1.*
From DB1.dbo.Table1 T1
Join DB1.dbo.Table2 T2 on RTRIM(T1.Col3) = RTRIM(T2.Col3)
Join Table4 CA on RTRIM(T1.Col1) + T2.Col2 = CA.Col1
Join Table3 U on CA.Col2 = U.Col2 AND RTRIM(T2.Col2) = U.Col3
Where U.Col4 NOT IN ('A1', 'A2', 'A3', 'A4', 'A5', 'A6','A7','A8','A9')
And (T1.flg IS NULL OR T1.flg = 'N')
And LTRIM(RTRIM(T2.Col2)) NOT IN ('B1','B2')
How can i improve the performance of this query. Actual thing is update the data in Db1.dbo.table1 based on the conditions but if the select is taking close to 1hr then update will take hours together. Indexes already implemented on all the tables.
Thanks,
Eshwar.
Please don't forget to Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful. It will helpful to other users.

Thanks.
Join Table4 CA on RTRIM(T1.Col1) + T2.Col2 = CA.Col1
This join is not working with spaces if Rtrim is not used.
Thanks! Eshwar.
Please don't forget to Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful. It will helpful to other users.

How to migrate files from different databases to sharepoint 2013?

Hello everyone,
I need to migrate files of various formats from two databases to SharePoint 2013 ? How should I pursue? Please explain..
Scenario : Two different databases on different systems have loads of files. I need to migrate them to SharePoint?
Any suggestions/ Answers

Hi,
You need to copy the database into your network shared folder or SharePoint Server where you wanted to attach this content DB to your newly created web application.
Hope and Afraid,
Same Domain has been used. I mean if you move the content db from the server 1 which using the AD1 for authenticate the users,
So your new server 2 and web application must have configured to authenticate the AD 1 users.Otherwise user not found exception will be thrown.
If not still you can change the site collection administrator for the site which is migrated from the server 1.
Murugesa Pandian., SharePoint 2010 | MCPD | MCTS |Configure

How to join tables from different databases (DBLink/DB connection )

Hello,
i have an issue and i hope you could help me to solve it. My problem is: I want to create native sql select which joins two tables from different DB (both of them are ORACLE, one of them internal, another one - external). I have found several notes and posts, but without any success. Db connection exists in dbcon table, so this part of my problem has been solved.
I would like something like that:
select * from table1@xxx inner join table2.
i can not split this select into two separate ones, because both tables store over 30 mln. entries and i do not want to create any copies of them.
Br,
dez

Hi,
you might need to create a DB-Link on DB level and use EXEC SQL.
Lots of stuff on google about this, like
Oracle DBLink ( external database )
Volker

Database restore from SQL 2000 to SQL 2005 for SBO 2005B

Hi Everyone,
I am facing some problems in regards to the restore of SBO Database from SQL 2000 to SQL 2005.
Let me explain you the problem.
See I am using SAP B1 2005B with patch level 38 in my laptop with SQL 2000. I have made an company in this and done work in it as a production company and now I want to restore this company in the server which has SQL 2005. How to do it.
I have taken a backup in my laptop from SAP B1 Server Suite Manager which has SQL 2000 and sucessfully backed up but when I am trying to restore in the server which has SQL 2005 I am getting the following error in SQL 2005 in server :-
Restore failed for Server 'DXBAP001'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: Directory lookup for the file "C:\Program Files\Microsoft SQL Server\MSSQL\data\SBO_DCHAR.mdf" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
Please let me know the solution for it.
Thanks in Advance.
Regards,
Kawish Junaid Mazhari

Hi,
In SQL 2005 create a database and name as the 200 one was (though any name would do). when you create the database note the location of the .mdb and .ldf file.
once this had created right click on your new database > tasks > restore database
in the new window select from device and point it to your .bak file created from your 2000 system, ensure you put a tick in the restore box on the new line.
in the options tab tick overwrite database, and, change the file locations in the restore as directory to the file locations of the new database. the file names must be the same too.
you can change the original file names after the restore.
that should do the trick.
thanks,
mike

Database restore from different Database Sid

Similar Messages

Maybe you are looking for