DataGuard Continuing to Fail - ORA-16766, ORA-01237 - OPSCODE 17.4

DataGuard Broker failing every few hours ... have to stop and restart. ORA-16766, ORA-01237. I cannot find any information on the failure apply recovery marker (opscode 17.4).
The thought would be from the errors that the volume is out of space, we are running NETAPP and the volumes do auto expand but when I looked the volume it was only at 44% full at 1600 yesterday when I restarted and today I it is at 28%.
These are BIGFILE tablespace. I have restarted multiple times and keep getting the same errors daily and I just end up restarting and everything works again w/o intervention.
I don't want to daily have to check dataguard. If I don't run dg and just run "recover standby database until cancel auto" ... it just keeps going w/o issue, any ideas on the problem?
Please advise:
OS: Solaris 5.10
RDBMS:Oracle 11.2.0.2 64 bit
OMF
BIGFILE Tablespaces
VLDB - Standby DG Database
Created via RMAN Duplicate Database
Dataguard Alert shows the original startup information, does some health check ... becomes quite for a few hours and then I start seeing the Redo Apply is stopped.
2011-09-28 18:45:20.824 00000000 24342 Operation HEALTH_CHECK canceled during phase 1, error = ORA-16766
2011-09-28 18:46:20.929 DMON: HEALTH CHECK ERROR: ORA-16766: Redo Apply is stopped
Alert Log showing 1237 on the extend but volume is not out of space ... bigfile tablespace. I cannot find any information on the failure apply recovery marker (opscode 17.4):
Errors in file /u02/d002/oracle/bdump/diag/rdbms/DBUNIQNAME/DBNAME/trace/DBNAME_pr00_6331.trc:
ORA-01237: cannot extend datafile 670
ORA-01110: data file 670: '/u07/d101/oracle/DBUNIQNAME/datafile/o1_mf_ftk_31_c_784ql3gh_.dbf'
Managed Standby Recovery not using Real Time Apply
Wed Sep 28 18:43:57 2011
Recovery interrupted!
Wed Sep 28 18:44:29 2011
Archived Log entry 2805 added for thread 1 sequence 135638 ID 0x249d4159 dest 1:
Wed Sep 28 18:44:41 2011
Recovery stopped due to failure in applying recovery marker (opcode 17.4).
Datafiles are recovered to a consistent state at change 22941677700 but controlfile could be ahead of datafiles.
Wed Sep 28 18:44:42 2011
MRP0: Background Media Recovery process shutdown (DBNAME)
Wed Sep 28 18:46:04 2011
Trace FIle showing the same problem as the alert ...
Started Parallel Media Recovery
*** 2011-09-28 16:14:52.074 4265 krsh.c
Managed Standby Recovery starting Real Time Apply
*** 2011-09-28 18:43:08.759 4265 krsh.c
MRP0: Background Media Recovery terminated with error 1237
ORA-01237: cannot extend datafile 670
ORA-01110: data file 670: '/u07/d101/oracle/DBUNIQUNAME/datafile/o1_mf_ftk_31_c_784ql3gh_.dbf'
*** 2011-09-28 18:43:08.779 4265 krsh.c
Managed Standby Recovery not using Real Time Apply----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 54581570Kb in 8888.95s => 6.00 Mb/sec
Total redo bytes: 54636866Kb Longest record: 81Kb, moves: 49633/139704932 moved: 130Mb (0%)
Longest LWN: 118127Kb, reads: 45176
Last redo scn: 0x0005.576e3884 (22941677700)
Change vector header moves = 18603031/273716057 (6%)
*** 2011-09-28 18:43:08.816
Media Recovery drop redo thread 1
*** 2011-09-28 18:43:56.660
Completed Media Recovery
*** 2011-09-28 18:44:00.869
Checking to start in-flux buffer recovery from SCN 5.1465762230 to SCN (non-inclusive) 5.1466841220
Influx recovery found in-flux buffers
*** 2011-09-28 18:44:00.874
Influx Media Recovery add redo thread 1
*** 2011-09-28 18:44:36.493
Resized overflow buffer to 52335K (for 52335K LWN)
*** 2011-09-28 18:44:38.887
Resized overflow buffer to 63165K (for 63165K LWN)
*** 2011-09-28 18:44:41.686
Managed Recovery: Not Active posted.

It appears to be a problem that occurs every time an OMF file wants to extend that it kills the dataguard process irrelvant of what volume the file is on.

Similar Messages

ORA-16766: Redo Apply is stopped while enabling Dataguard Broker

Hi all,
I am using Oracle database 11g running in a Linux 5.4 (64 Bit) environment. I get the following error when trying to enable configuration.
DGMGRL> show configuration
Configuration
Name:                DG_AAI
Enabled:             YES
Protection Mode:     MaxPerformance
Databases:
    TEST - Primary database
    DEV - Physical standby database
Fast-Start Failover: DISABLED
Current status for "DG_AAI":
Warning: ORA-16607: one or more databases have failedWhen I executed: show database 'DEV' , I receive;
Database
Name:            DEV
Role:            PHYSICAL STANDBY
Enabled:         YES
Intended State: APPLY-ON
Instance(s):
    TEST
Current status for "DEV":
Error: ORA-16766: Redo Apply is stoppedWhen I went through the alert logfiiles I did not find out any clues, anyways I have pasted last couple of lines of the alert log files for your reference.
PRIMARY DATABASE_
Current log# 2 seq# 98 mem# 0: /u01/finsys/db/apps_st/data/log02a.dbf
Current log# 2 seq# 98 mem# 1: /u01/finsys/db/apps_st/data/log02b.dbf
Tue Aug 23 12:17:25 2011
LNS1 started with pid=68, OS id=2438
Beginning log switch checkpoint up to RBA [0x63.2.10], SCN: 5965834396855
Thread 1 advanced to log sequence 99 (LGWR switch)
Current log# 1 seq# 99 mem# 0: /u01/finsys/db/apps_st/data/log01a.dbf
Current log# 1 seq# 99 mem# 1: /u01/finsys/db/apps_st/data/log01b.dbf
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 99 for destination LOG_ARCHIVE_DEST_2
Tue Aug 23 12:18:20 2011
ARC3: Standby redo logfile selected for thread 1 sequence 98 for destination LOG_ARCHIVE_DEST_2
Tue Aug 23 12:19:55 2011
Incremental checkpoint up to RBA [0x62.35.0], current log tail at RBA [0x63.1c0.0]
Tue Aug 23 12:22:44 2011
Completed checkpoint up to RBA [0x63.2.10], SCN: 5965834396855
Tue Aug 23 12:40:10 2011
Incremental checkpoint up to RBA [0x63.1558.0], current log tail at RBA [0x63.1a
Standby Database_
RFS[8]: Identified database type as 'physical standby'
Tue Aug 23 17:47:50 2011
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[9]: Assigned to RFS process 6820
RFS[9]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[9]: Successfully opened standby log 5: '/u01/finsys/db/apps_st/data/log_sby03.dbf'
Tue Aug 23 17:48:42 2011
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[10]: Assigned to RFS process 6823
RFS[10]: Identified database type as 'physical standby'
Tue Aug 23 17:48:42 2011
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[11]: Assigned to RFS process 6825
RFS[11]: Identified database type as 'physical standby'
kcrrvslf: active RFS archival for log 5 thread 1 sequence 99
RFS[11]: Successfully opened standby log 4: '/u01/finsys/db/apps_st/data/log_sby02.dbf'I know this warning, could be ignored and the redo shipment is happening.. But I want to get rid off this warning and want to know the logic behind this... I did digging into my database and googling but solution not avail.
Thanks in advance for your assistance..
Rgds,

In addition to the above post, I forget to say that... When a log switch is done in the primary database the second database also recognise this and it recieves the archive log content.
Awaiting for an update..
Thanks and
Regards,
Asif

Error: ORA-16766: Redo Apply unexpectedly offline

I am trying to start DataGuard, but I am getting a 'Error: ORA-16766: Redo Apply unexpectedly offline' error when I do a 'show database verbose' on my standby database (the primary is fine). I do a 'alter database recover managed standby database disconnect from session;', but I am still getting the same error. Both databases are 10.2.0.4. Any ideas? Thanks a lot.

Did you check the standby alert log ?
If you are using dataguard broker you should not be manually starting recovery.
Did you try :-
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;

Getting error in mailing program :Cause: FDPSTP failed due to ORA-29277

in the following program i am submitting a request and sending concurrent program log file (.REQ file)as an attachment but getting
following error,plese tell me where i am wrong
ORACLE error 29277 in FDPSTP
Cause: FDPSTP failed due to ORA-29277: invalid SMTP operation
ORA-06512: at "SYS.UTL_SMTP", line 44
ORA-06512: at "SYS.UTL_SMTP", line 150
ORA-06512: at "SYS.UTL_SMTP", line 383
ORA-06512: at "SYS.UTL_SMTP", line 399
ORA-0651
code:
CREATE OR REPLACE PACKAGE BODY APPS.xx_create_acct
AS
   PROCEDURE submit_request(
      errbuf             OUT   VARCHAR2,
      retcode            OUT   VARCHAR2,
      Source_Application     varchar2,
Application     number,
Dummy_Parameter_0    varchar2,
Ledger    number,
Process_Category     varchar2,
End_Date     varchar2,
Create_Accounting_Flag    varchar2,
Dummy_Parameter_1    varchar2,
Accounting_Mode    varchar2,
Dummy_Parameter_2    varchar2,
Errors_Only_Flag    varchar2,
Report    varchar2,
Transfer_to_GL_Flag    varchar2,
Dummy_Parameter_3    varchar2,
Post_to_GL_Flag    varchar2,
GL_Batch_Name    varchar2,
Mixed_Currency_Precision    Number,
Include_Zero_Amt_Lines_Flag    varchar2,
Request_ID    varchar2,
Entity_ID    Number,
Source_Application_Name    varchar2,
Application_Name    varchar2,
Ledger_Name    varchar2,
Process_Category_Name    varchar2,
Create_Accounting    varchar2,
Accounting_Mode_Name    varchar2,
Errors_Only    varchar2,
Report_Level    varchar2,
Transfer_to_GL    varchar2,
Post_in_GL    varchar2,
Include_Zero_Amount_Lines    varchar2,
Valuation_Method    varchar2,
Security_ID_Integer_1    varchar2,
Security_ID_Integer_2    varchar2,
Security_ID_Integer_3    varchar2,
Security_ID_Char_1    varchar2,
Security_ID_Char_2    varchar2,
Security_ID_Char_3    varchar2,
Concurrent_Request_ID    number,
P_INCLUDE_USER_TRX_ID_FLAG    varchar2,
P_INCLUDE_USER_TRX_IDENTIFIERS    varchar2,
P_DEBUG_FLAG     varchar2
   IS
      l_senderemail     VARCHAR2 (2000) := '[email protected]';
      l_request_id      NUMBER;
      errmsg            VARCHAR2 (1000);
      req_id            NUMBER;
      phase             VARCHAR2 (200);
      status            VARCHAR2 (200);
      dphase            VARCHAR2 (200);
      dstatus           VARCHAR2 (200);
      MESSAGE           VARCHAR2 (200);
      wait_stat         BOOLEAN;
      l_file_name       VARCHAR2 (200);
      l_file_path       VARCHAR2 (2000);
      crlf              VARCHAR2 (4)    := CHR (13) || CHR (10);
      v_set_layout_option BOOLEAN;
       dir_name         varchar2(100);
    /* CURSOR req_status
      IS
                    SELECT SUBSTR (outfile_name, 55, 23) filename,
                SUBSTR (outfile_name, 1, 64) outfilepath
           FROM applsys.fnd_concurrent_requests
          WHERE request_id = l_request_id
            AND phase_code = 'C'
            AND status_code = 'C';*/
      directory_path    VARCHAR2 (2000);
      lv_subject        VARCHAR2 (100);
      lv_msg            VARCHAR2 (700);
      lv_msghdr         VARCHAR2 (100);
      lv_pdf_filename   VARCHAR2 (200);
   BEGIN
    apps.fnd_global.apps_initialize
                               (user_id           => apps.fnd_global.user_id,
                                 resp_id           =>apps.fnd_global.resp_id,
                                resp_appl_id      => apps.fnd_global.resp_appl_id
             l_request_id :=
            apps.fnd_request.submit_request
                                  ( 'BOM',
                                    'CSTCRACCRCV',
                                     NULL,
                                     NULL,
                                     FALSE,
                                    Source_Application,
                                    Application     ,
                                    Dummy_Parameter_0,
                                    Ledger    ,
                                    Process_Category,
                                    End_Date     ,
                                    Create_Accounting_Flag,
                                    Dummy_Parameter_1    ,
                                    Accounting_Mode    ,
                                    Dummy_Parameter_2,
                                    Errors_Only_Flag,
                                    Report    ,
                                    Transfer_to_GL_Flag,
                                    Dummy_Parameter_3,
                                    Post_to_GL_Flag    ,
                                    GL_Batch_Name    ,
                                    Mixed_Currency_Precision,
                                    Include_Zero_Amt_Lines_Flag,
                                    Request_ID    ,
                                    Entity_ID,
                                    Source_Application_Name,
                                    Application_Name,
                                    Ledger_Name    ,
                                    Process_Category_Name,
                                    Create_Accounting    ,
                                    Accounting_Mode_Name,
                                    Errors_Only    ,
                                    Report_Level,
                                    Transfer_to_GL,
                                    Post_in_GL    ,
                                    Include_Zero_Amount_Lines,
                                    Valuation_Method    ,
                                    Security_ID_Integer_1,
                                    Security_ID_Integer_2,
                                    Security_ID_Integer_3,
                                    Security_ID_Char_1    ,
                                    Security_ID_Char_2    ,
                                    Security_ID_Char_3    ,
                                    Concurrent_Request_ID,
                                    P_INCLUDE_USER_TRX_ID_FLAG,
                                    P_INCLUDE_USER_TRX_IDENTIFIERS,
                                    P_DEBUG_FLAG
         COMMIT;
         IF (l_request_id <= 0)
         THEN
            errmsg := apps.fnd_message.get ();
         ELSE
            wait_stat :=
               apps.fnd_concurrent.wait_for_request (l_request_id,
                                                     10,
                                                     360,
                                                     phase,
                                                     status,
                                                     dphase,
                                                     dstatus,
                                                     MESSAGE
            IF dphase = 'COMPLETE'
            THEN
               dir_name :='XX_CREATE_ACCT_LOG';
               l_file_name := 'l' || l_request_id || '.REQ';
               lv_subject := NULL;
               lv_msg := NULL;
               lv_msghdr := NULL;
               lv_pdf_filename := NULL;
               lv_subject := 'testing mail :Request for Create Accounting not completed';
               lv_msg :=
                     'Please find attachement here with the Status Of Create Accounting Reciving from cost management'
               || crlf;
               lv_msghdr := 'Dear Sir' ;
               lv_pdf_filename := l_file_name;
               send_mail (l_senderemail,
                          '[email protected]',
                          lv_subject,
                          lv_msghdr,
                          lv_msg,
                          lv_pdf_filename,
                          'text/application',
                          dir_name
            END IF;
         END IF;
   END submit_request;
   PROCEDURE send_mail (
      p_sender        IN   VARCHAR2,
      p_recipient     IN   VARCHAR2,
      p_subject       IN   VARCHAR2,
      p_mailbodyhdr   IN   VARCHAR2,
      p_mailbody      IN   VARCHAR2,
      p_filename      IN   VARCHAR2,
      p_filetype      IN   VARCHAR2,
      dir_name        in   VARCHAR2
   AS
      v_msg                          VARCHAR2 (32000);
      src_file                       BFILE;
      i                              INTEGER             := 1;
      v_raw                          RAW (500);
      v_length                       INTEGER             := 0;
      v_buffer_size                  INTEGER             := 57;
      v_mailconn                     UTL_SMTP.connection;
      gc_crlf                        VARCHAR2 (4)      := CHR (13)
                                                          || CHR (10);
      gc_lf                          VARCHAR2 (4)        := CHR (10);
      crlf                           VARCHAR2 (2)      := CHR (13)
                                                          || CHR (10);
      gc_mailhost                    VARCHAR2 (255)      := '172.16.11.2';
      -- gc_maildomain                  VARCHAR2 (255)      := 'pune.com';
      msg                            VARCHAR2 (32767);
      boundary              CONSTANT VARCHAR2 (256)
                                           := '-----7D81B75CCC90D2974F7A1CBD';
      first_boundary        CONSTANT VARCHAR2 (256)
                                          := '--' || boundary || UTL_TCP.crlf;
      last_boundary         CONSTANT VARCHAR2 (256)
                                  := '--' || boundary || '--' || UTL_TCP.crlf;
-- A MIME type that denotes multi-part email (MIME) messages.
      multipart_mime_type   CONSTANT VARCHAR2 (256)
                          := 'multipart/mixed; boundary="' || boundary || '"';
   BEGIN
      DBMS_OUTPUT.ENABLE (100000);
      --fnd_file.put_line (fnd_file.output, '------------------------------------------------------' );
      v_mailconn := UTL_SMTP.open_connection (gc_mailhost, 26);
      UTL_SMTP.helo (v_mailconn, gc_mailhost);
      UTL_SMTP.mail (v_mailconn, p_sender);
      UTL_SMTP.rcpt (v_mailconn, p_recipient);
      UTL_SMTP.open_data (v_mailconn);
      msg :=
            'Date: '
         || TO_CHAR (SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss')
         || crlf
         || 'From:[email protected] '
      --   || p_sender
         || crlf
         || 'Subject: '
         || p_subject
         || crlf
         || 'To: [email protected]'
        -- || p_recipient
         || crlf
         || 'MIME-Version: 3.1'
         || crlf
         ||                                          -- Use MIME mail standard
            'Content-Type: multipart/mixed;'
         || crlf
         || ' boundary="-----SECBOUND"'
         || crlf
         || crlf
         || '-------SECBOUND'
         || crlf
         || 'Content-Type: text/plain;'
         || crlf
         || 'Content-Transfer_Encoding: 7bit'
         || crlf
         || crlf
         || p_mailbodyhdr
         || crlf
         || crlf
         || p_mailbody
         || crlf
         || crlf
         || crlf
         || crlf
         ||                                                    -- Message body
            'Regards'
         || crlf
         || 'HR and Payroll Team'
         || crlf
         || crlf
         || ' Note- Please ignore the leave status and number of days.'
         || crlf
         || crlf
         || '-------SECBOUND'
         || crlf
         || 'Content-Type'
         || ': '
         || p_filetype
         || crlf
         || 'Content-Disposition: attachment; filename="'
       -- || 'Create Accounting'
        -- || '.REQ'
         ||p_filename                                         -- p_filename
         || '"'
         || crlf
         || 'Content-Transfer-Encoding: base64'
         || crlf
         || crlf;
      UTL_SMTP.write_data (v_mailconn, msg);
      src_file := BFILENAME (dir_name, p_filename);
      DBMS_LOB.fileopen (src_file, DBMS_LOB.file_readonly);
      v_length := DBMS_LOB.getlength (src_file);
      WHILE i < v_length
      LOOP
         DBMS_LOB.READ (src_file, v_buffer_size, i, v_raw);
         UTL_SMTP.write_raw_data (v_mailconn,
                                  UTL_ENCODE.base64_encode (v_raw)
         UTL_SMTP.write_data (v_mailconn, UTL_TCP.crlf);
         i := i + v_buffer_size;
      END LOOP while_loop;
      UTL_SMTP.write_data (v_mailconn, last_boundary);
      UTL_SMTP.write_data (v_mailconn, UTL_TCP.crlf);
      DBMS_LOB.fileclose (src_file);
      UTL_SMTP.close_data (v_mailconn);
      UTL_SMTP.quit (v_mailconn);
   EXCEPTION
      WHEN OTHERS
      THEN
         UTL_SMTP.quit (v_mailconn);
         DBMS_OUTPUT.put_line (SQLCODE || SQLERRM);
   --   FND_FILE.PUT_LINE (FND_FILE.LOG,'error while fetching values from CO_CODE'|| SQLERRM );
   END send_mail;
END xx_create_acct;Edited by: BluShadow on 18-Apr-2011 09:49
added {noformat}{noformat} tags. Please see the [url=SQL and PL/SQL FAQ and PL/SQL FAQ[/url] for info on how to post on the forums

I didn't get the information, What I want. Anyway, in the BLOB writing portion you have to create a temporary LOB and load your file into that temporary LOB and the write it into chunks.
Something like
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
    DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
    UTL_SMTP.write_raw_data(v_connection_handle,
                            UTL_ENCODE.BASE64_ENCODE(l_buffer));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer := NULL;
    l_pos    := l_pos + l_amount;
END LOOP;For more example see these posts:
Re: Sending UTL_SMTP mail with single jpg attachment issue
Re: getting junk letters instead of photo in an email.

Fdpstp failed due to ora-12899 value too large for column

Hi All,
User facing this problem while running the concurrent program.
the program is complted but with rhis error.
fdpstp failed due to ora-12899 value too large for column
Can any one tell me the excat solution for this?
RDBMS : 10.2.0.3.0
Oracle Applications : 11.5.10.2

User facing this problem while running the concurrent program.
the program is complted but with rhis error.Is this a seeded or custom concurrent program?
fdpstp failed due to ora-12899 value too large for column
Can any one tell me the excat solution for this?Was this working before? If yes, any changes been done recently?
Can other users run the same concurrent program with no issues?
Please post the contents of the concurrent request log file here.
Please ask your developer to open the file using Reports Builder and compile the report and run it (if possible) with the same parameters.
OERR: ORA-12899 value too large for column %s (actual: %s, maximum: %s) [ID 287754.1]
Thanks,
Hussein

Install fails due to ORA-12899: value too large for column

Hi,
Our WCS 11g installation on Tomcat 7 fails giving a "ORA-12899: value too large for column".
As per the solution ticket https://support.oracle.com/epmos/faces/DocumentDisplay?id=1539055.1 we have to set "-Dfile.encoding=UTF-8" in tomcat.
We have done this beforehand by setting the variable in catalina.bat in tomcat 7 bin as shown below
But still we get the same error while installation.
If anybody has faced this , let us know how you resolved it

We were unable to install WCS on Tomcat 7 but on Tomcat 6 by specifying "-Dfile.encoding=UTF-8" in java options using "Tomcat Configure" it was succesful.
An alternative we found was to increase the value of the column itself.
Using command
ALTER TABLE csuser.systemlocalestring
MODIFY value varchar2 (4000)

Standard Data Collection Failing with Error ORA-04054: database link does not exist.

Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,

Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

FDPSTP failed due to ORA-06550: line1 ,column:" Wrong number of types of ar

Hi All
I am tying to submit the concurrent request through buttom, when i press the button.. the request is submitting but showing the error"FDPSTP failed due to ORA-06550: line1 ,column:" Wrong number of types of argument in call"
What are the paramerter i submited in SRS window( normal submition not throu button) is are equall submition throw button.... And in procedure also i am using errbuf and retcode...
Can any one help regarding the issue where i am doing the mistake...
PROCEDURE Einvoice(ERRBUF OUT VARCHAR2,RETCODE OUT VARCHAR2,P_INVOICE_TYPE RA_CUST_TRX_TYPES_all.type%TYPE,
P_INVOICE_FROM RA_CUSTOMER_TRX_PARTIAL_V.TRX_NUMBER%TYPE,
P_INVOICE_TO RA_CUSTOMER_TRX_PARTIAL_V.TRX_NUMBER%TYPE,
P_CUSTOMER_ID RA_CUSTOMER_TRX_PARTIAL_V.SOLD_TO_CUSTOMER_ID%TYPE,
P_DOCUMENT_NUM NUMBER,
P_reprint_flag VARCHAR2
In the button trigger
FND_REQUEST.SUBMIT_REQUEST('GETSAR'
,'EINVOICE'
,NULL ,NULL ,FALSE
,:main_b.invoice_type
,to_number(:main_b.From_Invoice_number)
,to_number(:main_b.to_invoice_number)
,:main_b.customer_id
,to_number(:main_b.document_no_from)
,:main_b.reprint_flag
,'') up to 100 parameters
We need to change any datatypes in procedure ?????????????

Duplicate post.
"FDPSTP failed due to ORA-06550: line1 ,column:" Wrong number of types of
"FDPSTP failed due to ORA-06550: line1 ,column:" Wrong number of types of

Getting Error in Data Collection - FDPSTP failed due to ORA-23401

Hi All,
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.
But when I am submitting the Data Collection which is the last step I guess, the program is ending with Error.
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.
And because of this, when I am going to Sales Order to check the ATP, I am getting the error that Try Calculating ATP Again.
Please Help. Project is into a critical stage and I am stuck with this error.
With Regards,
Vishal Majithia

Please mention the application release.
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.What is the document you are referring to?
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.Please see if these docs help.
Refresh Snapshot Errors With ORA-12034: Snapshot Log On "BOM"."BOM_SUB_OPERATION_RESOURCES" Younger Than Last Refresh [ID 180705.1]
How to Rebuild Source Snapshots Used in the Data Collection or Planning Data Pull MSCPDP [ID 148584.1]
Thanks,
Hussein

DB creation failed with error ORA-01034

Hi,
I am trying to create db through dbca, but it's failed because of ORA-01034.
group ownership of software is changed from dba to a_dba. What is possible cause of this error...?

Hi,
>>group ownership of software is changed from dba to a_dba
For what reason did you perform this task?
>>ORA-01034.
Could you confirm if the database is open or not? There are other messages that accompanying this message?
Reference:
ORA-01034: ORACLE not available
Cause: Oracle was not started up. Possible causes include the following:
- The SGA requires more space than was allocated for it.
- The operating-system variable pointing to the instance is improperly defined.
Action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. If Oracle has been initialized, then on some operating systems, verify that Oracle was linked correctly. See the platform specific Oracle documentation.
Cheers
Legatti
Added reference
Message was edited by:
Eduardo Legatti

Cost Manager Concurrent req failed due to ORA-00060:

Hi
We are using Oracle Applications E-Business suite 11.5.9. OS HP-UX
Cost Manger is an scheduled concurrent program which was error out thrice scince today morning with the following error.
Cause: cmlmcm() failed due to ORA-00060: deadlock detected while waiting for resource.
I found no dead lock occurred. I don't know why it happend so.
Please help me out on this issue.
tokala
Edited by: Neosatish on Oct 20, 2008 1:38 PM

Could you suggest me the method to find out the scheduled concurrent request in specific time period. Or How to find out the the scheduled time for a concurrent program.Run the following query:
SQL> select *
from fnd_concurrent_requests
where status_code in ('Q','I')
and hold_flag = 'N';Note: 170107.1 - How to Determine Scheduled Concurrent Requests
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=170107.1

FDPSTP failed due to ORA-20100: File o0035807.tmp creation for FND_FILE fai

Cause: FDPSTP failed due to ORA-20100: File o0035807.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 410
ORA-06512: at
$ echo $APPLPTMP
/usr/tmp/DEV
$ echo $APPLTMP
/prod2/devcomn/temp
SQL> show parameter utl_file_dir;
NAME TYPE VALUE
utl_file_dir string /usr/tmp, /usr/tmp/DEV, /prod2
/devcomn/temp, /prod2/devcomn/
temp/DEV, /homeoa/interf/DEV,
/homeoa/interf/PROD, /homeoa/i
nterf/DEV/OP, /homeoa/proaut2/
DEV/OP, /homeoa/proaut2/DEV, /
homeoa/proaut2/DEV/CO, /homeoa
/proaut2/DEV/PT
I applied some notesm, about the utl, and APPLPTMP. But the error persist, Can you help me?
Regards,
Guido

Cause: FDPSTP failed due to ORA-20100: File o0035807.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 410
ORA-06512: at
$ echo $APPLPTMP
/usr/tmp/DEV
$ echo $APPLTMP
/prod2/devcomn/temp
SQL> show parameter utl_file_dir;
NAME TYPE VALUE
utl_file_dir string /usr/tmp, /usr/tmp/DEV, /prod2
/devcomn/temp, /prod2/devcomn/
temp/DEV, /homeoa/interf/DEV,
/homeoa/interf/PROD, /homeoa/i
nterf/DEV/OP, /homeoa/proaut2/
DEV/OP, /homeoa/proaut2/DEV, /
homeoa/proaut2/DEV/CO, /homeoa
/proaut2/DEV/PT
I applied some notesm, about the utl, and APPLPTMP. But the error persist, Can you help me?https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-20100+AND+FND_FILE+&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-20100+AND+ORA-06512&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

FDPSTP failed due to ORA-20100: File 1111.tmp creation for FND_FILE failed.

Dear,
Cause: FDPSTP failed due to ORA-20100: File l0187052.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 543
ORA-06512: at "APPS.HRI_
We are facing the problem while running standard request. Could you pls advice,
Thansk.

user-Keen wrote:
Dear,
Cause: FDPSTP failed due to ORA-20100: File l0187052.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 543
ORA-06512: at "APPS.HRI_
We are facing the problem while running standard request. Could you pls advice,
Thansk.
You may also see previous threads which discuss the same topic -- https://forums.oracle.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=ORA-20100+APPS.FND_FILE
Thanks,
Hussein

Error: FDPSTP failed due to ORA-06550

Hi all..
I have a procedure which was running in backend(sql * plus). in oracle apps it was showing the error.
Cause: FDPSTP failed due to ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SAMPLE_PROCEDURE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
i read some post in which it is asked to add 2 parameters (errbuff OUT varchar2,retcode OUT number) to the procedure. when i added those 2 parameters in my procedure, i got the error now in backend too. i couldn't compile my procedure. the same error is displayed in my sql * plus.
this is my procedure script:
create or replace procedure
sample_procedure(errbuff OUT varchar2,retcode OUT number).
can anyone help pls...
thanks in advance..

create or replace procedure
sample_procedure(errbuff OUT varchar2,retcode OUT number).Change errbuff to errbuf and try again.
Custom Stored Procedure Run as Concurrent Request Fails w/ PLS-306 AND ORA-6550 [ID 1016543.102]
ORA-6550 PLS-306 When Running A Valid Database Procedure [ID 100977.1]
Thanks,
Hussein

CONCSUB failed due to ORA-12154: TNS:could not resolve service name

Hiall,
While bringing up concurrent managers getting the below error.
Cause: CONCSUB failed due to ORA-12154: TNS:could not resolve service name
I just cloned the instance.
urgent help is appreciated as I am missing the dead line to complete clone.
Regards,
Siva

Pleas post OS and EBS version
Please check the listener is up and running on DB tier.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1
Edited by: 3Amigos on Nov 21, 2010 9:16 AM

DataGuard Continuing to Fail - ORA-16766, ORA-01237 - OPSCODE 17.4

Similar Messages

Maybe you are looking for