Datasheets and certs of conformance

Hi,
I was wondering if anybody knows how I can get my hands on datasheets and certificates of conformance for spare parts? I've been searching online but to no avail, I've contacted HP helplines and customer services but again, to no avail. I'm looking for IEC, UL, CSA, RoHS and REACH certs of conformance, as well as a data sheet for the part 5066-1122. Its a universal external power adapter for multiple HP applications. It is a genuine HP spare part but when I request and look for this items, I just get passed from one customer services rep to the next.
If anyone knows where I can get these, I'd really appreciate being informed.
Thanks in advance folks.

You should consider to use a certificate enrollment web services (which are intended for such scenarios):
http://technet.microsoft.com/en-us/library/dd759209.aspx
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Similar Messages

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Redirect and cert

I am working on setting up Lync 2013 in an environment that has multitenant Exchange running. We have a HLB to handle the load balancing and certs. Right now all exchange users no matter what domain they are in they are redirected to a single
connection point on the HLB that uses a cert with only one domain name on it.
I can not seem to get the Lync system to do the same. any suggestions would be greatly appreciated. Thanks in advance!!

Hi,
As I know, it is supported if your users want to sign in with one sip domain. You may need to get further information from your certificate provider.
You can refer to the link of “Microsoft Lync Server 2013 Multitenant Hosting Pack Deployment Guide”:
http://www.microsoft.com/en-in/download/details.aspx?id=39101
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SJSWS 7.0 CSRs and CERTs

I have generated a CSR for WS and have received a CERT and that works fine... all installs well.
However, I would like to be able to clean slate re-install the WS and reload the CERT (why - because we have a script that rebuilds an RP in minutes automatically so in many cases when the configuration is updated enough it is simply easier - and keeps us more aligned - to uninstall and re-install)... however when I do this I get an error message of form:
ADMIN4112: No Private key found
Which I understand to mean that the cert databases have no private key to correlate to this CERT as I obviously re-installed the product (and have new cert database files).
So is the only solution to backup and restore copies of the cert8.db and key3.db files?
OR is there some other way to re-load the CERT into WS even though this particular instance never generated the CSR?
BTW I read that entering a token-pin is optional in the docs and in other user forum postings that it is not. Is it really? (I didn't set it)

bmsunw wrote:
however when I do this I get an error message of form:
ADMIN4112: No Private key foundIf you get this error in an existing instance, this would mean Admin server is unable to see the manual changes you have made to the instance. Use pull-config CLI [http://docs.sun.com/app/docs/doc/819-3283/6n5h03huv?a=view] to get the changes back into Web Server Admin.
But in your case you are creating a new instance. You can copy the all *.db from https-<instance>/config into the new instance's config directory and call "pull-config" CLI.
BTW I read that entering a token-pin is optional in the docs and in other user forum postings that it is not. Is it really? (I didn't set it)Yes. You can set password for NSS "internal" data base as blank in Web Server 7.0.
But when you are running it in FIPS mode, you need to set NSS Database password. It's a FIPS requirement that needs to be enforced when FIPS is enabled by any FIPS compliant module.
[http://wikis.sun.com/display/WebServer/faq_security#faq_security-28.WhyisNSSDatabasepasswordnecessarywhenserverisrunninginFIPSmode%3F]

Wallet and Cert location with OHS in front of B2B

Hi,
I am trying to figure out how many and what types of Certs are needed as well as where the wallet should reside in the following scenario. We have a stand alone OHS in a public DMZ which is forwarding our inbound trading partner messages to the MidTier server which contains B2B. We have also configured B2B to use the public DMZ OHS as a proxy when sending outbound messages to the trading partners. The RosettaNet PIPs that we will be implementing require signing (non-repudiation), encryption and SSL.
I assume that SSL must be enabled on the public DMZ OHS, but does it have to be enabled on the MidTier server as well? I believe that if we had to enable it on both servers, then different certs would be required for the different servers, but I am not sure.
Also, we have to configure the outbound messages from our B2B with all of this (signing, encryption and SSL). Does this require a cert and wallet on the B2B server or on the OHS or both? I know that when configuring the trading partner within B2B, the cert must be accessed, but I am completely confused on if this is the cert that we use on OHS or something different.
Thanks so much for any help you can provide!
Darrin

Hi Darrin,
Certificates will be used at both OHS and Midtier. At OHS you are receiving incoming traffic so your server certificate should be there (in PKCS 12 format). From midtier, you are sending messages to your TP's (your Outbound), so your client certificate should be at Midtier at following location-
Oracle_Home/Apache/Apache/conf/ssl.wlt/default
At above location three files should be there-
1. cwallet.sso
2. ewallet.p12 (Your Client cert with all trading partners server cert public key in base 64 format including CA's cert as well)
3 ewallet.txt (export of whole ewallet.p12 in ".txt" format)
Give path of ewallet.txt in your tip.properties file.
SSL would be enabled at both midtier and OHS, but if OHS is sending messages to midtier at HTTP port then do not enable transport security in your host tp's delivery channel.
You have to upload certificates which will be used for siging and encryption at resepective tp's delivery channel.
Wallets are used for client and server authentication and signing and encryption in outbound where as certs uploaded at tp's delivery channel are used for decrypting the incoming message as well as verifying the tp's signature in message.
Regards,
Anuj
Edited by: Anuj Dwivedi on Feb 11, 2009 12:28 PM

New Firefox ESR and certs

Hi all: I downloaded and installed the newest Firefox ESR (31) this AM. I know that ZCM may not support this new version but I wanted to test it anyway. Right off Firefox refuses to load the ZCC website stating that the CA in untrusted. Gone in this new version of Firefox is the ability to bypass and load the CA anyhow. We use the internal ZCM CA rather than our external eDirectory CA. Should I change ZCM to use a new certificate minted by our eDir CA? If so, do I need to touch all the workstations in our zone?
Thanks, Chris.

What makes you think there is an issue about the ZCM Cert?
It's more of a Firefox Bug Really, which fails to trust certs you have
trueted that are self-signed vs using someone such as Verisign.
This really impacts AD Certs, ZCM Certs, , eDir Certs, etc.. etc...
In Short, There was a goof at Mozilla.....
On 8/7/2014 8:26 AM, darryl82 wrote:
>
> I think that option will be disabled as of Firefox 33. is there a way to
> fix the zenworks certs?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Schema extension [extend] and ldap v3 conformance [proprietary]

Hi,
am I still conform to ldap v3 spec when I extend the schema with my own attributes and object classes (with the iplanet console 5.1)?
So, does ldap v3 only define the object classes and attributes or an extension mechanism too?
Regards
Kristian

The first example was almost correct !
The error message: "javax.naming.NameNotFoundException: [LDAP: error code 32 - 0000208D: NameErr: DSID-031001C6, problem 2001 (NO_OBJECT), data 0, best match of: 'CN=Schema,CN=Configuration,DC=ric,DC=com'; " simply indicates a naming error.
If you follow the logic of your code, you are trying to create an attribute with the distinguished name:[code]CN=fooattr,CN=Schema,CN=Configuration,DC=ric,DC=com,CN=Schema,CN=Configuration,DC=ric,DC=comIf you are wondering why, it is because you are attempting to create the subcontext from the schema naming context.schema.createSubcontext("CN=fooattr," + dn,attr);You can correct this by changing your code toschema.createSubcontext("CN=fooattr",attr); or toctx.createSubcontext("CN=fooattr," + dn,attr);One other error, you are missing one of the mandatory attributes; namely oMSyntax.attrs.put("oMSyntax","2");You can find details on the Active Directory Schema at http://technet2.microsoft.com/WindowsServer/en/library/97cae647-d996-48ff-b478-c96193abeadb1033.mspx
A simple way of checking the mandatory attributes for any object class is to look at the values of the systemMustContain attribute of the objectClass definition. In the case of attributeSchema, the systemMustContain attribute includes: schemaIDGUID (automagically generated), oMSyntax, ldapDisplayName, isSingleValued, cn, attributeSyntax and attributeID
Another reference that is helpful is a table of Attribute Syntax definitions at http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/distrib/dsbe_ext_dghb.mspx
The only words of advice for extending the schema are:
1. Test, Test, Test, before deploying in production
2. Do not ever reuse attributeID's or make up your own! If you are extending the schema get your own OID from an appropriate standards authority, or they may be obtained from Microsoft. Refer to http://msdn2.microsoft.com/en-us/library/ms677621.aspx or http://msdn2.microsoft.com/en-us/library/ms677620.aspx

Keystores and Certs etc

Hi, we've got a webapp running in Tomcat. It makes a call (using HttpUrlConnection) to an external site using HTTP. We're getting this in the logs:
sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested targetFrom what I've read, this is usually because the external site's public key isnt in the keystore. So, I've (hopefully) found the correct keystore and imported the public keys. But I still get the same error.
So, I wrote some basic test programs, using HttpUrlConnection like this:
URL url = new URL(address);
HttpURLConnection conn = (HttpURLConnection)url.openConnection();
conn.connect();and also for good measure using SSLSockets
SSLSocketFactory sslsocketfactory = (SSLSocketFactory) SSLSocketFactory.getDefault();
SSLSocket sslsocket = (SSLSocket) sslsocketfactory.createSocket(host, port);I was expecting to see the same problem on my own PC here, but both connection methods work fine... I thought my code would fail until I manually imported the site's certificates into my keystore (I've been testing with HTTPS sites that my PC never seen before)
Any ideas what could be causing the original exception if it's not a missing public key as I originally thought?
Thanks

Hi sdf_iain, and a warm welcome to the forums!
I'm on Leopard at the moment, but in fact, the etc folder is an Alias here, and identical in content to the private/etc folder!

Sign in authentication and cert questions!

Hi guys,
I have read this Lync 2010 article: http://blogs.technet.com/b/nexthop/archive/2012/11/28/lync-2010-client-authentication.aspx
It states that for internal users one use kerberos v5, tls-dsk and ntlm v2, and for extenral users on use tls-dsk and ntlm v2.
Once one have authenticated one will retrieve a certificate that is valid for 180 days.
Now... is this valid for Lync client/server 2013 as well? or is there something new? I cannot find this information on technet...
For the serverpart one use OAuth i guess?

Hi,
Yes, client-server authentication is the same with mechanism for Lync 2010.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NI-DNET and ODVA DeviceNet Conformance Test

Hello,
in an other message it was mentioned, that the Conformance test is not running on NI-cards, is there a time shedule for the implementation of the ODVA DeviceNet conformance test on NI-hardware?
Best regards

Hi,
Unfortunately there are no plans to implement necessary steps to run the Conformance Test on NI Boards right now.
DirkW

Re-Conforming and Audio Bug nightmares

Hi,
First, let me say that I've searched throughly about those problems before I came in here.
I own a company and we used to use FCP7 to edit our weekly show.
I've moved all suites to Premiere CC 7.2.1
Our workflow is a bit different than before, since PP can handle original files, in our case .mts sony AVCHD FullHD from FS700, NX70 a Handycam and the MP4 from GoPro Hero3.
Our main problems right now have been:
Re-Conforming:
I've searched about this and these are the possibles solutions
- Turn the creation of XMP off
- Disable XMP metadata linking
- Direct the cache and database files to the same external harddisk that our media is in
- Direct the scratch disk to the same Harddisk as the media.
- Media been on a Network volume and Computer clock / daylight saving time shifting.
- Before opening a project in a different machine, make sure to redirect (to find) the cache to the disk your using
I must say everything above was tested and dealt with but still. We have seen projects re-conforming by it self everytime we open PP. It normaly happens when moving from computer to another one. But sometimes happens on the same machine, between two days apart, with nothing different.
And the re-conforming takes a lot of time.
Audio Bugs:
Sometimes the waveform doesn't show up. Now this has a workaround, just go to clip > audio options > re-render audio. But it's annoying.
And more serious sometimes we got an audio looping 1sec over and over, even though the original is perfect, trying to re-render doesn't help. re-importing the clip doesn't help. Only deleting ALL the preview files (because you can't know which is which) that works.
Is there anyone with solutions (definitive) for these problems?
Regards

Hi Jim,
As I said, I'm using external USB 3.0 drives. No Network drives whatsoever.
All these:
System
Projects
Cache/Scratch
Media
Exports
Are in the USB 3.0 Harddisk.
If you are refering to the same drive as the OS that's not a solution as in some machines I have 160GB SSD.
Cheers,

Bug: Why does PP Conform and reconform same video clips over and over again?

Any time I click out of PP and then come back to the program from ANYWHERE (even the desktop), PP starts to conform my files.
For example, I have a very simple test project open with four 5-minute clips in it. All the files have done their "conforming." But I click outside of PP and then immediately click back inside and it starts conforming one or more of the files that it had already previously conformed. This happens every other time I click out of PP.
Shouldn't a file that has already been conformed need to go through that just one time in a project?
I'm thinking that my bug has something to do with this now since things go crazy slow while conforming. It has always done this with larger projects, but I thought it was clips that hadn't been conformed before. Now that I only have a few clips to keep my eye on, I see it is conforming and reconforming the same clips over and over again every time I come back to PP.
Here's a screencast video of the problem. You can see it reconforms the same files over and over again. http://www.youtube.com/watch?v=uFrXk4nTpwo

I'll describe what happens first, as it makes the explanations of the failure cases a little more clear.
PPro generates two potential sidecar files for audio - PEK and CFA files. The PEK file is simply a quick data pass of the audio data that allows the app to draw waveforms (ie it should be pretty quick) - the CFA files are required if the file source is either too slow to decode the audio in realtime (like some MPEG long GOP, for instance), or if there's a mismatch in the sample rate depth. The idea is that the conform files will match your sequence's audio bitrate settings so that the app can play & mix audio in realtime.
How does PPro track these additional files? Every file that is imported is stamped with XMP, which is how we handle metadata on source files. XMP creates a unique ID which the app uses as a lookup value when it wants to find the PEK & CFA files that it generated for a file. So, usually, if you have a project where certain clips constantly reconform, it has something to do with XMP. Why? Usually it's because XMP can't write to the file. So, every time you launch PPro and open the same project, the media file has no XMP data, so it tries to generate a new ID, so any old CFA/PEK files have an ID mismatch and the app thinks it needs to generate new ones.
Typical cases why XMP can't stamp files:
- the media file is read-only.
- the media's hard drive is read-only.
- the file itself is corrupted/malformed, and XMP takes the safe route & decides not to try to write any additional data to the file. (I've personally witnessed this occur with WAV files captured by a Tascam field recorder.)
- someone deleted the XMP files by hand (certain media types have it as a sidecar .XMP file instead of embedded). (Don't laugh - I recently encountered a case where people had instituted a server folder rule to delete all files on a network share that weren't .mpg. )
A workaround you can try:
There's a preference setting to turn off injecting XMP into your media. If that setting is in effect, PPro will not rely on the XMP ID for the CFA/PEK files.
One other note, if your problem is specific to MPEG files: it might be that PPro isn't able to index the file properly. If it can't index, it might be trying to re-index on each launch; audio conforming always triggers after indexing. So watch for it constantly indexing - if that's the case, all the XMP stuff I described above has nothing to do with the problem. It's a side effect of something in the MPEG stream that we're barfing on. If you do see it constantly re-indexing MPEG files, it would be really helpful to send in a sample so that we can examine the stream.
Cheers

Do not include some lines in Subtotals and totals in ALV

Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
<b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
   REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
   TYPE-POOLS: icon.
   TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
   CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L   I N T E R N A L   T A B L E S
   *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
   TYPES: BEGIN OF st_sflight.
           INCLUDE STRUCTURE zsflight.
      Field for traffic light
   TYPES: traffic_light TYPE c.
      Field for line color
   types: line_color(4) type c.
   TYPES: END OF st_sflight.
   TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
   DATA: gi_sflight TYPE tt_sflight.
G L O B A L   D A T A
   DATA: ok_code         LIKE sy-ucomm,
    Work area for internal table
         g_wa_sflight    TYPE st_sflight,
    ALV control: Layout structure
         gs_layout       TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
   DATA:
     go_grid             TYPE REF TO cl_gui_alv_grid,
     go_custom_container TYPE REF TO cl_gui_custom_container,
     o_event_receiver    TYPE REF TO lcl_event_receiver.
   DATA:
Work area for screen 200
     g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
   DATA:
Internal table
     gi_index_rows TYPE lvc_t_row,
Information about 1 row
     g_selected_row LIKE lvc_s_row.
C L A S S E S
   CLASS lcl_event_receiver DEFINITION.
     PUBLIC SECTION.
       METHODS:
        handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING
            e_object e_interactive,
        handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
          IMPORTING e_ucomm.
   ENDCLASS.
      CLASS lcl_event_receiver IMPLEMENTATION
   CLASS lcl_event_receiver IMPLEMENTATION.
     METHOD handle_toolbar.
Event handler method for event toolbar.
       CONSTANTS:
Constants for button type
         c_button_normal           TYPE i VALUE 0,
         c_menu_and_default_button TYPE i VALUE 1,
         c_menu                    TYPE i VALUE 2,
         c_separator               TYPE i VALUE 3,
         c_radio_button            TYPE i VALUE 4,
         c_checkbox                TYPE i VALUE 5,
         c_menu_entry              TYPE i VALUE 6.
       DATA:
           ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
       CLEAR ls_toolbar.
       MOVE c_separator TO ls_toolbar-butn_type..
       APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
       CLEAR ls_toolbar.
       MOVE 'CHANGE'        TO ls_toolbar-function.
       MOVE icon_change    TO ls_toolbar-icon.
       MOVE 'Change flight' TO ls_toolbar-quickinfo.
       MOVE 'Change'        TO ls_toolbar-text.
       MOVE ' '             TO ls_toolbar-disabled.
       APPEND ls_toolbar    TO e_object->mt_toolbar.
     ENDMETHOD.
     METHOD handle_user_command.
Handle own functions defined in the toolbar
       CASE e_ucomm.
         WHEN 'CHANGE'.
           PERFORM change_flight.
       LEAVE TO SCREEN 0.
       ENDCASE.
     ENDMETHOD.
   ENDCLASS.
S T A R T - O F - S E L E C T I O N.
   START-OF-SELECTION.
     SET SCREEN '100'.
   *&      Module USER_COMMAND_0100 INPUT
   MODULE user_command_0100 INPUT.
     CASE ok_code.
       WHEN 'EXIT'.
         LEAVE TO SCREEN 0.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0100 INPUT
   *&      Module STATUS_0100 OUTPUT
   MODULE status_0100 OUTPUT.
     DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
       l_layout TYPE disvariant,
Utillity field
       l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines > 0.
       CALL METHOD go_grid->set_selected_rows
           EXPORTING
             it_index_rows = gi_index_rows.
       CALL METHOD cl_gui_cfw=>flush.
       REFRESH gi_index_rows.
     ENDIF.
Read data and create objects
     IF go_custom_container IS INITIAL.
Read data from datbase table
       PERFORM get_data.
Create objects for container and ALV grid
       CREATE OBJECT go_custom_container
         EXPORTING container_name = 'ALV_CONTAINER'.
       CREATE OBJECT go_grid
         EXPORTING
           i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
       CREATE OBJECT o_event_receiver.
       SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
       SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
       l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
       gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
       gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
       gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
       gs_layout-info_fname = 'LINE_COLOR'.
       LOOP AT gi_sflight INTO g_wa_sflight.
         IF g_wa_sflight-paymentsum < 100000.
      Value of traffic light field
           g_wa_sflight-traffic_light = '1'.
      Value of color field:
      C = Color, 6=Color 1=Intesified on, 0: Inverse display off
           g_wa_sflight-line_color    = 'C610'.
         ELSEIF g_wa_sflight-paymentsum => 100000 AND
                g_wa_sflight-paymentsum < 1000000.
           g_wa_sflight-traffic_light = '2'.
         ELSE.
           g_wa_sflight-traffic_light = '3'.
         ENDIF.
         MODIFY gi_sflight FROM g_wa_sflight.
       ENDLOOP.
Grid setup for first display
       CALL METHOD go_grid->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_variant       = l_layout
                   i_save           = 'A'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gi_sflight.
   *-- End of grid setup -
Raise event toolbar to show the modified toolbar
       CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
       CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
     ENDIF.
   ENDMODULE.                 " STATUS_0100 OUTPUT
   *&      Module USER_COMMAND_0200 INPUT
   MODULE user_command_0200 INPUT.
     CASE ok_code.
       WHEN 'EXIT200'.
         LEAVE TO SCREEN 100.
         WHEN'SAVE'.
         PERFORM save_changes.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0200 INPUT
   *&      Form get_data
   FORM get_data.
Read data from table SFLIGHT
     SELECT *
       FROM zsflight
       INTO TABLE gi_sflight.
   ENDFORM.                    " load_data_into_grid
   *&      Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
   FORM change_flight.
     DATA:l_lines TYPE i.
     REFRESH gi_index_rows.
     CLEAR   g_selected_row.
Read index of selected rows
     CALL METHOD go_grid->get_selected_rows
       IMPORTING
         et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines = 0.
       CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
            EXPORTING
                 textline1 = 'You must choose a line'.
       EXIT.
     ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
     LOOP AT gi_index_rows INTO g_selected_row.
       IF sy-tabix = 1.
        READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
       ENDIF.
     ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
     CLEAR g_screen200.
     MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
     LEAVE TO SCREEN '200'.
   ENDFORM.                    " change_flight
   *&      Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
   FORM save_changes.
     DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
     MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
     MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
     IF g_wa_sflight-paymentsum < 100000.
       g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
       g_wa_sflight-line_color    = 'C610'.
     ELSEIF g_wa_sflight-paymentsum => 100000 AND
            g_wa_sflight-paymentsum < 1000000.
       g_wa_sflight-traffic_light = '2'.
       clear g_wa_sflight-line_color.
     ELSE.
       g_wa_sflight-traffic_light = '3'.
       clear g_wa_sflight-line_color.
     ENDIF.
     MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
     CALL METHOD go_grid->refresh_table_display.
     CALL METHOD cl_gui_cfw=>flush.
     LEAVE TO SCREEN '100'.
   ENDFORM.                    " save_changes

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

Datasheets and certs of conformance

Similar Messages

Maybe you are looking for