Datasource about invnetory

dear experts,
i am confused by different datasource when i extractor data from r/3.
in how to ---invnetory doc, bx,bf and um are recommended.
but if i try to search some topics on inventory value, the datasource like 0CO_PC_ACT_02,0CO_PC_ACT_03-------will be used to extract data.
what's the difference?
many thanks,
brgds/steve

Hi...
Check this....
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
0CO_PC_ACT_02 is Material Valuation: Per. Ending Inventory ..........
Check this.....
http://help.sap.com/saphelp_nw70/helpdata/EN/dc/e9383fd98d1201e10000000a114084/frameset.htm
0CO_PC_ACT_03 is Material Valuation: Per. Ending Inventory Sales Order Stocks
Check this ......
http://help.sap.com/saphelp_nw70/helpdata/EN/37/ea383fd98d1201e10000000a114084/frameset.htm
Regards,
Debjani.......

Similar Messages

2LIS_03_BF - Inventory Management DataSource

Dear reader,
i scheduled LBWE for 2LIS_03_BF Datasource about 30 hrs ago and the job is till running on R3 side. the extraction was set from year 2006 july.
does it normally take this long. If not, what could be the problem. Shall i schedule it again, or it normally takes this long.
please advise and let me know if you need more information to find out the cause.
regards.

You're correct...I did mean LBWG. I was typing too fast and got my LBW* tcodes all mixed up.
You would use the LO Cockpit (LBWE) for scheduling the V3, or other delta job, anytime after you have done an init InfoPackage in your BW environment. This job will fill the delta queue table for the extractor. The delta queue table differs from the setup table, therefore you can schedule this job while the OLI*BW setups are executing.
OLI*BW tcodes execute initial setups of LIS DataSources, whereby it extracts everything into a setup table and this setup table is the source from which Full and Init w/ Data Transfer extract InfoPackages will pull data.
LBWE is the Logistics Cockpit, which is used for maintaining the LIS DataSource structures, activation of LIS DataSources and scheduling of Update (delta) jobs. The delta jobs fill the delta queue table, which you can view in RSA7, and is the source from which Delta extract InfoPackages will pull data.

Release Strategy of Procurement in BI Content?

Hi,
Is there any standard datasource about Release Strategy of Procurement in BI Content?
Any helpful suggestion, I will give points.
Thanks.
Stephen

There are couple of approaches that can be taken with this issue since there are delivered extracters exclusively for Purchasing Requisitions.
1) Piggy back on PO ITEM Extracter (2LIS_02_ITM) or PO Schedule Line Extracter (2LIS_02_SCL).
Purchasing Requisition/Items (Table EBAN, TCODE ME53) are uniquely linked to PO/Item (Tables EKPO, TCODE ME23N).
PO Item (EKPO-EBELN & EKPO-EBELP) are linked to (EBAN-BANFN & EBAN-BNFPO).
Based on this you can extract the required fields from EBAN in the User Exit for PO ITM or PO SCL extracter.
This is what I did but my case was not same as yours. We primarily need PO Item/SCL information with some pertinent attributes from the requisitions
Pros: No need to write a seperate extracter.
Cons: If there are any requisitions that are not converted to PO's they will not be included in extraction till such time they are actually converted to PO's
2) As Bala indicated , Create a Custom extracter based on Table EBAN.
Pros: All Requisitions are extracted regardless of whether they have been converted to PO's.
Cons:
1) I am not certain if Generic Delta will successfully trigger all Changes to the Requisitions (depending on how the P2P process is configured for your Project).
2) If Delta does'ent work in all scenarios then a FULL load might be very difficult to manage based on the Data Volume.
Hope this helps.
Thanks
Vasu

Cisco Unified CCX Premium 7.0(1)SR05

I have a customer that has 4 phone only agents. They have added a couple new offices. They want the agents to answer the calls differently base on what number the call came from.
The agents will all be at one location but taking the calls for all locations. Since these are phone only agents I do not know of a way to alert the agent of the number the caller called so they know how to properly answer the phone.
Looking to the group for some suggestions. Installing software on the workstations is not an option.

Hi,
if you have some programming experience and the phones do not change their IP addresses too often (like every ten minutes or so), then what you might want to do is a web application that would periodically update a map of phone numbers - IP addresses (naturally, the key would be the agent extension) using AXL. This web application would listen for HTTP queries from the UCCX script, look up some information (probably in an external datasource) about the caller ANI, perform some calculations, like converting this ANI to some more human readable form like the name of the customer, then "send" a screen to the IP phone containing this info.
It looks like a tasty weekend project.
If you like this idea, I can help you with that (I demand at least 40 percent of the revenue )
G.

How to activate 0WBS_ELEMT_USR_ATTR

Hi,
I tried to activate 0WBS_ELEMT_USR_ATTR but ı cant find this datasource in rsa5 tcode at ECC(v6) side. there are another datasources about WBS_ELEMT but no any info about 0WBS_ELEMT_USR_ATTR.
How can ı find and activate this datasource ?
Thanks.

Hi Karan,
Thanks for your reply. SAP_APPL release is 600. I think, It means in this release no any EHP.
Thanks.

Need more Info about HR Datasources to use in BI

Hello,
some one can give me more information about the HR Datasources and how to use in BI...
Best Regards

Dear Baris,
Please check these links :
http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
Regards,
Ramkumar.

Advices about creating a datasource from an infoset query

Hi all,
i have to create a datasource with extraction from an infoset query in R3, i have many questions:
1- i have heard about the bad performance using a Datasource from an Infoset query, how can i improve this?
2- The infoset query doesnt exist in R3 Develop, but this exist in R3 Prod, what do i must to do? create a false infosetquery in R3 D, with just the same name of the info set query in R3 Prod? or what else?,
3- some material to improve this development about create datasources from an infoset query.
thanks guys!

Hi,
You can verywell use infoset query if you are doing following things
Join using Keyfields to retreive data from tables
If not using keyfields create index for those table fields in those fields which will improve in accessing database
Try to use minimum of tables of small size dont try to join big tables like GLPCA and all.
Try to load small set of data like a period or month. Dont try for a year or so.
if your performance is good for aperiod you can go for a year.
If you are good in function module you can try function module in which you will have the option of specifying no of records to be selected usign package size.
Hope this helps for you.
Thanks,
Arun

Question about Creating DataSources for FlatFile Data Acquisition

Hello eveyone,
I am trying to create flatfile datasources. I've been checking out the existing ds in my dev system and there are some infrastructure here that have loaded data in them, all via their won flatfile DS. I've been looking at the DS and am trying to figure out logic in which they are defined. I saw that most of the fields are defined in CHAR even if they pertain to fields like quantity, Amount and so on... They are also in the Internal format. Yet they have been successfully loaded...
My question is: what are the rules of thumb in defining the DS? How do i go about in mapping the fields to objects in the system? Can anyone please give me the step-by-step scenario as to how to do this please?
Many thanks,
Philips

Hi Philip,
Pls. try the following steps ..may be helpful.
1. when ever you want to create a flat file structure..keep in mind that, what are
    fields data available in your file. second thing is you need to know the IO of
    the info provider in which you are uploading.
2. simply create your own DS with PC File, and other hand open up your infprovider, and keep on check with your flat file what is the sequence of the data
fields and what are they corresponds to in the cube/ODS
3. As your flat file sequence, keep on identify the related IO of your provider and
copy it individual and paste it in your infosouce one by one as sequence of your
flat file..
4. No need to think of what type of data it is and how it is..
5. simply copy all your correponding IO (what ever of their type) even including
    some of the ref. IO.
6. And finally save and activate your DS creation.
I hope it would help in creating your own Flat File DS.
Need further info revert...
Cheers,
Thanks=Points.

Questions about DATASOURCE?

Hello everyone,
I am wondering about what the Datasource is,and what profit can the datasource bring us?
And I need a connect pool to fit my website demmands.Could you give me some advise about which is good and free?
Thank you and Best regards!

Hello everyone,
I am wondering about what the Datasource is,and what
profit can the datasource bring us?Profit?
And I need a connect pool to fit my website
demmands.Could you give me some advise about which is
good and free?
Thank you and Best regards!Look at http://jakarta.apache.org/commons/dbcp/

Is any one answer about SD datasources, cubes and queries on SD?

is any one answer about SD datasources, cubes and queries on SD?

hi,
refer to this links.
http://help.sap.com/saphelp_nw04s/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/c09a5ee9e94e86a73109c5c3184efa/frameset.htm
hope it helps,
regards,
Parth.

How to solve about DataSource

hi
I'm getting problem when i'm creating a datasource in the JMF.
the below code written for the datasource
ds = javax.media.Manager.createDataSource(locator);
calling the locator(MediaLocator) by using
locator = "c://CBRT/demp.wav"
looking forward for reponse
thanks in advance

I hope,
locator = new MediaLocator(" blablabla ");
try file:///c:/.... or file:/c:/......

Basic questions about PL/SQL web services and datasource names

Hi there,
I successfully generated a web service for a PL/SQL packaged procedure in JDeveloper 11.1.1.3.0).
In the web service base class the following code was generated:
__dataSource = (javax.sql.DataSource) __initCtx.lookup("java:comp/env/jdbc/dbconnectionDS");However in the weblogic server the datasource name is jdbc/somethingelse so the deployment fails at first.
What is the recommended procedure to solve this issue? The obvious solution is to manually edit the source -- that is what I did and it worked fine. However if I re-generate the web service I will lose my change. Is there a better way to do this?
Another question -- in the generated web.xml file, there is a resource-ref for the datasource. I was hoping that changing the datasource name there would help but it didn't work. What is it used for in this context?
Thanks
Luis

Hi Vishal,
I did as you suggested but it didn't work... see below more details.
Thanks
Luis
1 - I re-generated the web service from the PL/SQL package. The constructor in CFBTestWSBase class looks likes this:
public CFBTestWSBase() throws SQLException
{ try {
javax.naming.InitialContext __initCtx = new javax.naming.InitialContext();
__dataSource = (javax.sql.DataSource) __initCtx.lookup("java:comp/env/jdbc/custfeedbackDS");
} catch (Exception __jndie) {
throw new java.sql.SQLException("Error looking up <java:comp/env/jdbc/custfeedbackDS>: " + __jndie.getMessage());
}2 - I added the following section to weblogic.xml:
<resource-description>
<res-ref-name>comp/env/jdbc/custfeedbackDS</res-ref-name>
<jndi-name>jdbc/DataSource</jndi-name>
</resource-description>3 - I got the following error when during deployment to weblogic server:
[HTTP:101216]Servlet: "CFBTestWSPort" failed to preload on startup in Web application: "CustFeedbackTestWS.war".
java.sql.SQLException: Error looking up <java:comp/env/jdbc/custfeedbackDS>: While trying to look up comp/env/jdbc/custfeedbackDS in /app/webapp/CustFeedbackTestWS.war/346617503.
at cfbtestws.CFBTestWSBase.<init>(CFBTestWSBase.java:33)
at cfbtestws.CFBTestWSUser.<init>(CFBTestWSUser.java:11)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
...

About JBOSS3.0 datasource error!!!!

develop CMP2.0 ,USE JBuilder7.0+jboss3.0+jdbc_odbc bridge
at first I have config correct odbc datasource in WIN2000;
this my connection of datasource mysql.xml file;
<?xml version="1.0" encoding="UTF-8"?>






<server>




<mbean code="org.jboss.resource.connectionmanager.LocalTxConnectionManager" name="jboss.jca:service=LocalTxCM,name=myjdbc">


<depends optional-attribute-name="ManagedConnectionFactoryName">

<mbean code="org.jboss.resource.connectionmanager.RARDeployment" name="jboss.jca:service=LocalTxDS,name=myjdbc">
<attribute name="JndiName">myjdbc</attribute>
<attribute name="ManagedConnectionFactoryProperties">
<properties>
<config-property name="ConnectionURL" type="java.lang.String">jdbc:odbc:myfirst</config-property>
<config-property name="DriverClass" type="java.lang.String">sun.jdbc.odbc.JdbcOdbcDriver</config-property>
<config-property name="UserName" type="java.lang.String">sa</config-property>
<config-property name="Password" type="java.lang.String"></config-property>
</properties>
</attribute>


<depends optional-attribute-name="OldRarDeployment">jboss.jca:service=RARDeployment,name=JBoss LocalTransaction JDBC Wrapper</depends>
</mbean>
</depends>
<depends optional-attribute-name="ManagedConnectionPool">

<mbean code="org.jboss.resource.connectionmanager.JBossManagedConnectionPool" name="jboss.jca:service=LocalTxPool,name=myjdbc">
<attribute name="MinSize">0</attribute>
<attribute name="MaxSize">50</attribute>
<attribute name="BlockingTimeoutMillis">5000</attribute>
<attribute name="IdleTimeoutMinutes">15</attribute>

<attribute name="Criteria">ByContainer</attribute>
</mbean>
</depends>
<depends optional-attribute-name="CachedConnectionManager">jboss.jca:service=CachedConnectionManager</depends>
<depends optional-attribute-name="JaasSecurityManagerService">jboss.security:service=JaasSecurityManager</depends>
<attribute name="TransactionManager">java:/TransactionManager</attribute>

<depends>jboss.jca:service=RARDeployer</depends>
</mbean>

</server>
my error is;
why it don't connect database;
but when it run to creat() method ,it may insert into table ,but that TABLE isn't I define in JBuilder;
I think it is dataSource's error!
because I test connection of database ,disconnect;
I am very incertitude;
please tell me how to resolve this question?????
thank you!
may you give me example?
thank you!

hi.
I have to say I do not know how to write correctly <type-mapping> for jdbc-odbc bridge -- i did not use one....
In the standardjbosscmp-jdbc.xml file there are type mappings for many DB. Try to post your question on JBoss Fourms http://www.jboss.org/forums/ or just search in jboss forum archives -- I hope you'll get fast answer. As for me your problem is not very specific and you'll find anwser at last. Somebody must have had the same problem before.
Wish you luck, Volodymyr Shram.

The question about from datasource to PSA

hi,experts,I have one question .the data selection of datapackage is blank.That means all of data have been selected.but I found that some data didn't enter PSA.so,I wonder why not all data enter PSA. thanks.
Best Regards.
Brian.

Hi,
Is it a full upload or delta upload.
If it is a delta upload then only changed records will come even though there is no selection.Check your infopacage.Also check the datasource whether it is delta enable or not.
Kindly update me regarding this.
Regards,
Debjani

Push/DataSource question about .cda files

Hi,
I'm trying to programm a program and with it it should be possible to rip .cda files to .wav files.
Now I found a way how to do this, but I'm not sure, if my idea works well.
My idea:
In Windows it is possible to play .cda files with JMF.
I read, that a cda file is only a pointer to a location on the CD and at this location there is stored a file which is quiet the same as a .wav file.
But what is, when I create a PushDataSource (or something else, I don't know) and get the source-stream, read the bytes and save this to a .wav file.
Is this a way to rip .cda files?
Thanks for answers, thomas

Are you talking about this?
This is optional. You don't need to use this at all. It's just to verify that the account details you have entered are valid (ie test connection).
Note that your client push installation account has to be local administrator on all devices on which you want to install a client.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Datasource about invnetory

Similar Messages

Maybe you are looking for