Datatable; display items horizontally

If it is just an ordinary List or Array of items, then use h:panelGrid instead. Bind it to the backing bean an let it dynamically populate.

Similar Messages

How to display a horizontal list of images

Hello everyone,
I am new to Flash Builder 4 and I am looking to display a horizontal list of images on my Flex Mobile Project (using Burrito Flash Builder). Can anyone recommend me what component that I should use?
I know the <s:List /> will display a Vertical list of items, but I am not sure what component to display a horizontal list of items.
Thanks in advance for any help,

Have you tried using HorizontalList?
Here is an example:
http://flex4fun.com/2010/11/30/flex4-horizontallist-example/

Display a database item on display item

please i have a varchar database item and i want to display the last item in this field on a display item what should i do and i used the row id to get the last value but it didn't work

Still not clear what you are trying to achieve...
it is just a non database item that i want to view the data in the database item in itIf it a "non database item", how can it have a relationship with a database value?

ALV report i want to display in each P.O , i want to display item details

Hi all,
in alv report i want to display in each P.O , i want to display item details. is it possible without hierarchical display.

hi,
once you retrive po number from ekko then retrive data from ekpo and loop at ekpo and append all the item details to your internal table.

Portlet Item Attr: "Link That Displays Item in New Browser Window"

I have been searching the forums for a similar experience, but haven't found anything quite like this:
I have a couple of portlets. One is a Discoverer Portlet, the other is something more basic: The "Developer News" portlet from the 9iAS Community portlet provider.
After defining the portlets and looking at them, I edit the page and click the Edit button (little pencil) to edit the attributes.
There are radio buttons for Display Options.
One option is: "Link that Displays Item in New Browser Window."
When I select this, OK, and then go back to the page, **the portlet doesn't show at all any more! There is no link, no nothing. Note that I have defined a Display Name, which should be the text for the link.
It would seem that this feature flat out doesn't work.
This technique for a popup works fine for an "Item" defined in an item region.
Anyone?

Yes -- I did do that after reading an article on metalink about such issues.
This actually changes the problem.
When I add the "Display name and image link" attribute to the region, I now do get a link.
However, clicking it brings up an undefined Discoverer portlet.
It works great for non-Disco portlets. For instance, I was able to pop up the "Developer News" portlet from the Oracle 9iAS Community portlet provider.
I think the problem is that the link that Disco produces does not provide enough information to bring up the particular portlet. For instance, the URL does not have the workbook name, the worksheet name, the parameter values, etc.
If anyone uses Disco w/ the portal, I would be curious to hear if anyone can reproduce this apparent bug / limitation.

Changing Vertical display to horizontal in Crystal report 10

Post Author: arun.net
CA Forum: Charts and Graphs
Hi.
I am working in one of the .net application where we are using Crytal report version X(10) for report generation.
I have Week_start(Data type Date) as field in the graph,but by default is displaying the field in graph as vertical so every thing is getting over lapped.
I want that this( Week_start ) has to display as horizontal so it can not over lap from one to other, But not sure how i can do this.
I tryied to attached my graph so it make more sence,But not able to Atttach the file.
Thank you in advance.
Arun

Hi
Hyperlink would not be a solution to what you are asking for.
If you want to see the records related to a particular employee id by clicking on emp id, you can try the below:
- Apply a group on employee id on the main report.
- Insert a subreport with the required fields and place it on the Employee id Group header. You can put a name of the subreport as "Check Employee details" or something else as per requirement and make it a on demand subreport.
- Link the subreport on Employee id.
Hope this helps!!!
Regards
Sourashree

Displaying items in a single line in ALV grid using ALV_TOP_OF_PAGE.

Hello Guys,
I am having a problem in displaying items in a single line in the ALV Grid using event ALV_TOP_OF_PAGE.
My requirement is to group items on a single line i.e. in the example below, Vendor code and posting date are on the same line. The next line the prints Vendor Name and Document no.
Vendor Code: 123123                               Posting Date : 01.01.2011
Vendor Name: ABCD                                 Document No: 152246598.
Here is my code in subroutine 'ALV_TOP_OF_PAGE',
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Vendor Code'.
APPEND wa_list_comments TO it_list_comments.
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Posting Date'.
APPEND wa_list_comments TO it_list_comments.
The above code prints in the following format i.e one below the other,
Vendor Code: 123123
Posting Date : 01.01.2011.
I also tried using HTML_TOP_OF_PAGE, but it didn't work.
Can anybody please help me out with this.
Regards,
Danish.

Hi Danish,
Your problem is with the alignment and you need some fix positions .
The solution i feel is u can use as below :
In CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
use
i_callback_html_top_of_page       = 'HTML_TOP_OF_PAGE'.
Now on calling routine call use cl_dd_document class :
FORM html_top_of_page USING document TYPE REF TO cl_dd_document .
data : doctable TYPE REF TO cl_dd_table_element,
          col1_t1 TYPE REF TO cl_dd_area,
          col2_t1 TYPE REF TO cl_dd_area,
          col1_t2 TYPE REF TO cl_dd_area,
          col2_t2 TYPE REF TO cl_dd_area.
add quick table with five columns
    CALL METHOD lw_document->add_table
      EXPORTING
        no_of_columns               = 2
        border                      = '0'
     cell_background_transparent = ' '
        width                       = '100%'
      IMPORTING
        table                       = doctable.
Filling columns in row
    CALL METHOD doctable->add_column
      EXPORTING
        width = '40%'
      IMPORTING
        column = col1_t1.
Filling columns in row
    CALL METHOD doctable->add_column
      EXPORTING
        width = '60%'
      IMPORTING
        column = col2_t1.* Filling columns in row
Call method doctable->new_row.
    CALL METHOD doctable->add_column
      EXPORTING
        width = '40%'
      IMPORTING
        column = col1_t2.
Filling columns in row
    CALL METHOD doctable->add_column
      EXPORTING
        width = '60%'
      IMPORTING
        column = col2_t2.
*Now adding the texts
lw_text1 = 'your first text'
CALL METHOD col1_t1->add_text
      EXPORTING
        text = lw_text.
*Similarly add text for other columns
*Adujust % in width to adjust the column as required
Endform.
Hope this will solve your problem .

How to add a display item like the one in 'Invoices screen' please ?

The label operating unit is in a folder like feature . Is this a display item/ a folder ? I need to add the same thing as label . Thanks .

twinklin_girl wrote:
I figured out it's a folder. How to add folder functionality to a customized form please ?Please see the following docs/links -- Search for "APPFLDR"
Customization in Oracle Applications [ID 743490.1]
http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T302936.htm#d0e750
http://docs.oracle.com/cd/E18727_01/doc.121/e12900/T458979T458984.htm#I_bx2Dlib
Folder Functionality in custom form
https://forums.oracle.com/forums/search.jspa?threadID=&q=APPFLDR&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Multi-Line Display Item

I need to populate a multi-line display item in Forms 6i.
The problem that I am having is the actual assignment to the display item.
For example:
:DISPLAY_ITEM := '10';
:DISPLAY_ITEM := '11';
This makes the display item show the value '11' only.
I need '10' on the first line and '11' on the second line, etc.
Thanks in advance,
Patrick

well, you can write:
go_block('BL_BLK');
first_record;
:display_item:=10;
next_record;
:display_item:=11;
but for this- 1. block should have one navigable item. 2. display_item should not be the first item of the block.
Otherwise you will need to create a non-databse text_item with width 0 on the canvas for that block.
Hope this helps.
Regards
Mona

How do you display the horizontal display button in iMovie 11

Can anybody tell me how to display the horizontal display button in Imovie 11 to display the project in one horizontal timeline as opposed to multiple rows?

It is in the top right corner of the Project pane - next to the Marker Buttons. It looks like 3 gray squares.

Display item visual attribute

Hello.
Is there a way to use set_item_instance_property on display item?
Or change font color of disabled text item?
Thanks.

Set_item_instance_property is the new built-in. Don't use the old display_item. Help says: "Maintained for backward compatibility only."
Use the new one. There are all properties in the built-in you need for changing the visual attributes.
try it
Gerd

Sorting on non-displayed items - can it be done ?

Hi,
I'm very new to Discoverer (and this forum), so apologies if I'm covering old ground.
I've created a simple discoverer table report and the folder I've based the data on has a number of columns that determine the sort order i.e. called 'activity_type_sort_order', 'activity_sort_order', 'enclosure_order_order' - this is because the related columns activity_type, activity and enclosure are VARCHAR but contain numeric values.
Hence, the existing application displays the data in the correct order in the Forms and Reports without showing the user the underlying columns that are determining the order.
I want to do something similar in Discover i.e. produce a report that displays the columns activity_type, activity, enclosure but sorts the data based on 'hidden' columns activity_type_sort_order, activity_sort_order and enclosure_sort_order.
I tried creating my first Discoverer report and it seems to need the activity_type_sort_order, activity_sort_order and enclosure_sort_order as displayed items in the workbook in order to all the rest of the data to be sorted.
Is there any way I can sort using these fields but not actually display them ?
I've read that I can create an alternate sort in the EUL but I've got 1000's of values.
Can anybody help ?
Many thanks
mknipe

Hi,
You should be able to use the hidden sort option. In the sort tab add the sort columns and then change the sort type to be hidden.
Rod West

The display is horizontal shifted??? Please Help

The display seems horizontally shifted...
For example,
* When viewing any presentations or PDFs in Full-screen presentation mode, there is a black bar on the left side of the screen about 1.5 inches wide. And then images/docs being displayed get shifted to the right 1.5 inches, so that the right edge of the image/doc is cut off.
*Another example: If I arrange the desktop icons by Name, half of them end up off of the screen, too far to the right.
Any ideas?...
Thanks!
Mike

What display? What interface? Your post is a little light on important details.
If you are referring to the built-in display, you better have it looked at by Apple because there is no adjustment for what you describe.
Or could it just be that the display is zoomed in? System Preferences/Universal Access...set Zoom to off.

Populate multi record display item

Hellou gurus!
I have forms 10g and i need to populate display item in enter query mode. My problem is that I have table T1 with some static values. Table T2 is through ID connected (reference) to table T1 1:1 cardinality and T2 table also have reference to T3 table.
I have block B2 based on table T2 and in this block I have multirecord item for inserting and updating new values for T2, but in this block ii also have no DB, multi record display item (because i don't want to allow editting in T1 table records) for diplaying static values for table T1. I want to display all static values from T1 next to the editable values in T2 (T2 multi record field is not insert yet). I tried for loop, select into but it not work. T1 values need to be selected before I started to inserting values into T2 items, but off course they need to be referenced It is hard to explain but i belive you understand.
Can you help me how I can populate multi record item??

You have to write the code again for your second list item....
group_id RecordGroup;
list_id Item := Find_Item('button.tyear');
list_id1 Item := Find_Item('button.tperiod');
status NUMBER;
rg_name varchar2(40) := 'recgroup';
BEGIN
----------------------------- LIST
clear_list(list_id);
group_id := Find_Group(rg_name);
IF NOT id_null(group_id) then
Delete_Group(group_id);
End if;
group_id := Create_Group_From_Query(rg_name,
'select vm_year, vm_year from fwqgl.vouchermaster
group by vm_year');
status := Populate_Group(rg_name);
Populate_List(list_id, group_id);
/* --------------------SECOND LIST ITEM...BUT REC. GRP NAME CAN BE SAME,better to use another name if you need to retrieve list and store qry..other wise the fol. code is enuf-----------------------*/
clear_list(list_id1);
group_id := Find_Group(rg_name);
IF NOT id_null(group_id) then
Delete_Group(group_id);
End if;
group_id := Create_Group_From_Query(rg_name,
'select vm_period, vm_period from fwqgl.vouchermaster
group by vm_period');
status := Populate_Group(rg_name);
Populate_List(list_id1, group_id);
END;Edited by: Dora on Dec 5, 2009 10:41 AM

Problem with building conditional display items

Dear All,
Please help as I am using APEX for the first time.
This my requirement during form dispaly in tabular format. There is one display item QA_TIER(not a database item). This item value is computed based on the condition below.
I created a display item with :
Source Used : Always, replacing any existing value in the session state
Source Type: PL/SQL Expression or Function
Source value or expression:
begin
if 2<=(select decode(&Leg_Req,'Y',1,0)+decode(&maj_funct_chg,'Y',1,0)+
decode(&maj_tech_chg,'Y',1,0)+decode(&maj_ui_chg,'Y',1,0)+
decode(&maj_def_met,'Y',1,0) from dual) then
if &Customer_Priority = 1 then
return 1;
else
return &Customer_Priority-1;
end if;
ELSE return &Customer_Priority; end if;
end;
Note : All reference with '&' are the actual field name.
When running the page i get the following error message:
ORA-06550: line 2, column 23: PLS-00103: Encountered the symbol "&" when expecting one of the following: ( ) - + case mod new not null others select table avg count current exists max m ORA-06550: line 2, column 48: PLS-00103: Encountered the symbol "&" when expecting one of the following: ( ) - + case mod new not null others table avg count
     Error      ERR-1020 Error in PLSQL item processing (function).
Can anybody help me with building the display item with conditions as show above.
Thanks in advance

hi thanks for the help.
I tried this time source type SQL Query:
with both suggestions
1.
select (case when
2<=to_number((select decode(v(Leg_Req),'Y',1,0)+decode(v(maj_funct_chg),'Y',1,0)+
decode(v(maj_tech_chg),'Y',1,0)+decode(v(maj_ui_chg),'Y',1,0)+
decode(v(maj_def_met),'Y',1,0) from dual)) then
(select decode(v(Customer_Priority),1,1,v(Customer_Priority)-1) from dual)
ELSE v(Customer_Priority) end) from dual
Result:
ORA-00904: "CUSTOMER_PRIORITY": invalid identifier
     Error      ERR-1019 Error computing item default value: page=2 name=QA_TIER.
2.
select (case when
2<=to_number((select decode(:Leg_Req,'Y',1,0)+decode(:maj_funct_chg,'Y',1,0)+
decode(:maj_tech_chg,'Y',1,0)+decode(:maj_ui_chg,'Y',1,0)+
decode(:maj_def_met,'Y',1,0) from dual)) then
(select decode(:Customer_Priority,1,1,:Customer_Priority-1) from dual)
ELSE :Customer_Priority end) from dual
Result:
ORA-00932: inconsistent datatypes: expected NUMBER got CHAR
     Error      ERR-1019 Error computing item default value: page=2 name=QA_TIER.
Both didn't work.

Datatable; display items horizontally

Similar Messages

Maybe you are looking for