Date Field Tab Order

Hi,
This isn't necessarily a major issue, but as a creator and user of LiveCycle forms, I find it to be an annoyance. Does anyone know why after you select a date from the date picker, and then hit Tab, you start over at the beginning/top of the Tab Order instead of moving on to the next field in the Tab Order?
ZeroZone

Hi,
             Just set the sequence of objects in the Tab Order palette, this should work fine. Please correct me if i am understand wrong to your question. Find the image below.
Thanks

Similar Messages

  • Need Report based on "CUSTOM DATA field @ Shop Order Maintenance"

    Need the REPORT based on CUSTOM DATA field.
    Requirement - I am having the CUSTOM data at Shop Order Maintenance that is called as XXX, I need some report in SAP ME which can display the SFC related to particular Shop order based on XXX Number.

    Hi!
    As far as I remember there is no such base report. So, you may try to create it using SDK or request it as custom enhancement from SAP.
    If you want to create it using SDK, you can find the required data for report in CUSTOM_FIELDS table.
    Regards,
    Alex.

  • Exporting the fields tab order list

    Is it possible to export the field names in a form as the appear in the forms field.  I have around 200 field names and I am compiling a list of them in their order for a programmer.  Any help is appreciated

    Ok that I understand.
    I have a document with no /Tabs value (3rd case) thus the fields array should be taken,right?
    But in my opinion the /Fields array doesn't provide all the information nessary to be able to "jump" through all the fields.
    Let me give you an easy example (abbreviated):
    /Fields[6 0 R 10 0 R]
    6 0 obj
    <</FT/Tx/Kids[7 0 R 8 0 R 9 0 R]/T(Textfield1) ...>>
    endobj
    10 0 obj
    <</P 3 0 R/FT/Tx ....>>
    endobj
    7 0 and 10 0 are on page 1
    8 0 on page 2
    9 0 on page 3
    So in which order do I tab through the fields?
    7,8,9,10? (Fields array)
    7,10,8,9? (Annots array)
    In my opinion only the 2nd (=/Annots array) makes sense for tab navigation because I don't want to switch pages all the time, or do I miss something here?

  • Guidelines, Form Fields and Tab Order

    I've been fighting a form for about two weeks now with Acrobat 9 Pro. I used guidelines to make sure I could get 2 buttons and a field aligned properly. I have 92 instances of this arrangement. When I reopened the file after I had worked on it for a couple of hours (precisely positioning the guidelines so that I could have consistent field sizes), the guides were gone. What happened. It has now happened three times. I ended up keeping the computer on for 5 days just because I didn't want to lose the guides.
    I'm having a similar problem with the selection for tab order. I have right clicked on the page on the left panel, chosen page properties and set tab order to unspecified. I then reorder the fields in the field panel and save the file. When I open the file again, the tab order is unchecked and the fields are not in the order I left them.
    Does anyone have any idea why I'm losing my sanity with this Acrobat form. I did it in Acrobat because I thought it would be easier than LiveCycle Designer.
    I am duplicating a print form. This means there are 92 places where I have a small button (visible but doesn't print) which executes a JavaScript when pressed to show another button (because it has an icon which will circle the date indicated in a field. I'm thinking I should have the small button on top, aligned on the bottom with the field for the date and the circle icon as the bottom button. How do I get all of these fields and buttons (a mere 276) to go in the right order and stay that way?
    Warren Bingham

    Warren wrote: "I'm having a similar problem with the selection for tab order. I have right clicked on the page on the left panel, chosen page properties and set tab order to unspecified. I then reorder the fields in the field panel and save the file. When I open the file again, the tab order is unchecked and the fields are not in the order I left them."
    In the left panel, in the Sort drop-down list, you have Tab Order selected, right? In the Tab Order drop-down list, is Order Tabs Manually selected?
    I am not able to get any menu by right-clicking on the page in the left panel. Can anyone tell me, is there another way to view the page properties while in Form Editing? I'm not finding it in any of the regular menus (menu bar) and I'd like to verify the setting Warren mentioned, for troubleshooting my own problems with tab order.
    EDIT -- Of course, as soon as I type it out, I discover the cause. I thought he meant the page in the Form Editing view, but no, I have to open the Pages view and right-click on each page. (Oddly, no options were selected at all. Usually a radio button set will default to the most popular option.) So -- sorry, never mind me.

  • In VA01 Item detail screen tab Account assignment field  Internal order ???

    Dear Experts,
    In T.code VA01
    item level data tab Account assignment there is field internal order , here if i created internal order that internal order should come automatically into that field
    e.g. i have one article / material for that i created one internal order where i put all expenses through T.code FB50 and i want to add sales revenue for that while creation of sale order i am putting internal order manually in T.code VA01
    so my question is  the same task can be possible automatically or not
    i have two thoughts
    1) either that internal order should assign to article or material master data or
    2) status profile has some link with internal order type (so by default link with internal order ) and there is provision in T.code VOV8 and VOV7 we can add status profile .
    Question
    IS IT POSSIBLE INTERNAL ORDER SHOULD COME AUTOMATICALLY IN SALES ORDER ITEM DATA ACCOUNT ASSIGNMENT TAB AS PER ARTICLE / MATERIAL
    PLEASE GUIDE

    Hi Ravi,
    it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
    regards,
    Santosh

  • Add buttons in Sales Order's Addtional Data B Tab

    Hi All,
    I want to add buttons in Sales Order's Additional Data B tab. I had try to draw a creen in painter and push a button in the screen, also assign a fcode to it.
    I had try to test the button, and I find that, it could work, but after it's action, a error msg give out and said there are no this request function.
    I think it may cause by the fcode passing between screen. However, I don't know how to fix it. Any sample coding could for me reference?
    Thanks!

    Hi,
    yes u can add the button  with Fcode on Additional data B screen.But u have write the code in the PAI of the screen,inorder to do something,for that u need to have accesskey also...i hope while adding fields to Additional data B screen u ahve used teh accessskey for adding..zfields
    Regards,
    Nagaraj

  • Hide Tab order number in form fields

    Hi,
    In Acrobat 7.0 Professional (I know it's old), how do you hide the the tab order number in form fields you create? When I type in the form fields I've created, the tab order shows up on screen and on the hardcopy printed document.
    HELP!
    Thanks!

    This is what I'm seeing, however I think we would like to know how to change the order.
    For instance, I have formatted the form to have two columns of data entry: Personal info in column 1, product info in column 2. When the user types their name in column 1, row 1 for "Name" then go to tab down to "Email", it actually tabs right to column 2, row 1, "Product Year." Altering the tab order would fix this problem.
    Thanks!

  • Where do we have Fixed date field  in sales order

    Hi All,
    Where do we have the field "fixed date" in the sales order,
    What is the relevance of the field.
    Thanks in Advance,
    Regards
    Jai

    Hi,
    The fixed date field is available at sales order -> line item -> scheudle line tab. (VBAP-FIXMG).
    If you click on F1 button on this field you can see the user of it.
    From F1 help;
    Delivery date and quantity fixed
    Indicates whether you want to fix the delivery dates and quantities that are confirmed after an availability check for the item.
    Use
    You use this field if you cannot confirm the delivery date or quantity that the customer initially requests.
    Procedure
    If the customer accepts the delivery and quantity confirmed by the system, mark the field. The system then passes on MRP requirements so that the confirmed date and quantity can be met.
    Note
    If you leave the field blank, the delivery date and confirmed quantity are not fixed. If you are able to expedite either the manufacture or purchase of goods, you may be able to deliver the goods closer to the customer's original request (and sooner than the date the system confirmed).
    Regards,
    PS: Can you please close your previous postings, if you feel answered.

  • Export Data Field Order

    I've created a form with a number of text fields, pull downs, check boxes, etc. It is saved from Acrobat as a "Reader Extended PDF" so users can enter data and save.
    When I use Acrobat to "Merge Data into Spreadsheet" the field order seems bizarre. It's not alphabetical and it's not based on the tab order.
    Anyone know what determines the field order?
    Thanks.

    The order you see your fields in your hierarchy palette should be the order they come out in data unless you have them bound to a schema.
    Kyle

  • Setting tab order to form fields contained within a table, Indesign CS6

    I have created a form in ID CS6, and have put all the tabs in order so that people can easily navigate it when filling it in. However, all of the form fields that are contained within tables are not in order, and I can't find any way of putting them in order without changing them in acrobat after I have made the interactive PDF. This means that every time my client makes changes to the form I have to manually put all the fields in order again, which is time consuming. Is anyone able to help?

    This tab order dialogue box is nearly useless if you have a complex form with hundreds of form fields as there is no way to interact with the document when the dialogue is open and clicking on an entry in the list does not highlight the respective field. Furthermore, if you have arrays of radio buttons, or check boxes acting like radio buttons, ie all with the same form field name, there's no way to know which order they should be arranged in since they can't be selected or identified while this dialogue is open!
    That is immensely frustrating to say the least.
    It's quite ridiculous that Adobe hasn't fixed this bug in years and this user interface is shockingly bad.

  • Sorting of Date field in the SQL Query useing ORDER BY

    Hi
    I am facing a problem when I am getting the results of a query from the ORacle 8i database using jdbc connection.
    The query is having a date field and I have to sort the query results using ORDER By for the Date field. The query is giving exact results in the SQL PLus interface.
    When I am getting this results in the GUI where servlets are being used an Exception is coming as not supported RefreshRow method.
    If anyone has faced this problem and have got the solutions please let me know.
    thanks
    sulfy

    That doesn't sound at all like an SQL problem.
    More like you trying to do updates on the resultset which is not allowed ...
    send a some code (not to much pls :) and we'll be
    able to help more
    cu
    Spieler

  • Dates fields issue in the sales orders through IDOC

    Hi all,
    I'm trying to create a sales order through Inbound IDOC using IDOC_INPUT_ORDERS.
    I have 2 custom fields in the sales order which are date fields.
    I'm populating them from the IDOC segments(using E1EDKT1-tdid, E1EDKT2-tdline) in the user-exit just before the call trasacation statement. These dates are not coming for a few orders... but are getting populated normally for few of them.
    But the tricky part is that... if I process the same IDOC for the second time.. the order created is having the dates.
    My issue is that.. i need all the orders to be populated with the dates which IDOC have.
    Could anyone please help me with this issue.
    All the answers/replies are highly appreciated!!
    Thanks for you help!

    hi,
    the following may be of help
    There are 2 major exceptions to the batch input internal table. All text data from the segments E1EDKT1/2 and E1EDPT1/2 are not part of the batch input session. Text elements from these segments are posted directly to the data base AFTER the sales order has been created (please note: in order that item texts are posted correctly to the sales order the field POSEX from segment E1EDP01 MUST be transmitted). Also, configurable material information from the IDOC is exported to a global memory and therefore will not be part of the batch input session. Configurable material data is performed in Form CHECK_CONFIGURATION and the data is exported to global memory in the following code:
    Exportiert IDOC Daten ins globale Memory     
    export IDOC data to global memory            
      call function 'CUXC_IDOC_TO_MEMORY'          
           tables                                  
                cfg_instref = xe1curef             
                cfg_ref     = xe1cucfg             
                inst        = xe1cuins             
                part_of     = xe1cuprt             
                value       = xe1cuval             
           exceptions                              
                error       = 1                    
                others      = 2.                   
    One extra piece of useful infomartion if you wish to debug the process is to set your breakpoints at the following points
    for Function module IDOC_INPUT_ORDERS
    include LVEDAF0F..
      CALL TRANSACTION 'VA01' USING bdcdata
                                MODE  input_method
                                UPDATE 'S'
                                MESSAGES INTO xbdcmsgcoll.
    Now input_method is A foreground process and N for background processing but try changing it to P (pass through mode)
    If you have breakpoints in va01, e.g. MV45AF0B_BELEG_SICHERN,(the part where the sales document is saved)
    they will be hit, e.g
    perform userexit_save_document_prepare.
    perform userexit_save_document.
    Lastly, don't forget using program SDJEDI , see note 380603 for more information on this
    Hope this is useful
    Paul Quinn

  • Purchase Order released date field and table name

    Hi,
    Please tell me the  Purchase Order released date field and table name.
    Regards
    Deepak

    Hi,
    Table : EKKO.
    Fields : FRGKE,FRGZU.
    You can get release date of PO from CDHDR  table.
    give object value as your po number and check.dont forget to give leading zeros.
    The udate will be date field and transaction will be me29n for relaesed po.

  • Copy data customer PO and PO date field from quotation to sales order

    Hi Friends,
    Can you please let me know what copy control settings I need to maintain in order to copy customer PO# and PO date field data in quotation to sales order.
    All the data is getting copied from quotation to sales order when I create sales order with reference to quotation but the customer PO no. and PO date is not getting copied.
    Can anyone please help.
    Regards,
    Wasim.

    HI
    Not sure if this is possible via Customization or not but you can try the user-exits or Routines for the Sales Order program for this
    You need to change the include FV45C102 (assuming you have copied standard order and the copy controls). ABAP team should be able to make changes to this routine and achieve your requirement.
    In VTAA, after choosing the Source and Target order type and choosing the right Quatation item, check the routine for 'Bus.data/item compl.' and it will be what has been mentioned above.
    Please check &Revert
    Thanks&Regards
    Raghu.k

  • Custom field in VA01 at item level in Additional Data B Tab

    Hi ,
    I have a requirement to add a custom field at item level in Additional Data B tab of VA01/VA02. We have to store the data in that field in the VBAP table also have to validate the data entered in the field when user hit save.
    Can any body tell me step by step procedure to do that.
    Appreciate your response.
    Thanks,
    Rohit

    Add append structure  ZAVBAP  in table VBAP in Tcode: SE11.
    In this structure include the new fields to be added to the screen.
    Then in Tcode : SE80
    take program: SAPMV45A
    take screen 8459  and add the new field.
    Also add the validation in the flow logic.

Maybe you are looking for