Date fm or bapi

hi,
i need function modules or bapi for date converson
i give in put 1-03-2008 i want 1-jan-2008
regards,
jai

Hi Jai
U can use this code
TABLES: T247.
DATA: V_DATE TYPE SYDATUM.
DATA: V_STRING(20).
V_DATE = SY-DATUM.
SELECT SINGLE * FROM T247
WHERE SPRAS = SY-LANGU
AND MNR = V_DATE+4(2).
IF SY-SUBRC = 0.
CONCATENATE V_DATE+6(2) '-' T247-KTX '-' V_DATE(4)
INTO V_STRING.
WRITE: / V_STRING.
ENDIF.
Thanks
Jyothib.B
Edited by: jyothi on Mar 13, 2008 10:42 AM

Similar Messages

KEPM Data Upload with BAPI

Dear sirs:
I have to build a data upload program for transaction KEPM (Edit Planning Data), using the BAPI BAPI_COPAPLANNING_POSTDATA. Does anyone have a sample.
Thanks for your help.
Best regards,
Dairo

<b>FYI</b>
FU BAPI_COPAPLANNING_POSTDATA
Text
Write CO-PA Planning data
Functionality
You use this method to return planning data from Profitability Analysis back into the system. This overwrites existing planning data in the system (or, more precisely, the delta value between the old and new values is determined and updated as a line item).
You typically call up this method after reading planning data with the GetData method and making changes to it. To import the changed data back into the system, you fill the parameters SELECTEDFIELDS and SELECTION with data in the same way as you called up GetData. When data is being written, these parameters determine how the delta value between the planning data to be imported and the old planning data in the system is determined: firstly, the old planning data in the system is read in accordance with the values for the parameters SELECTEDFIELDS and SELECTION, and then the delta for the data to be imported is created.
The data to be posted is imported using the table DATA. Since this table is also used to read data with the GetData method, it should also be populated accordingly when data is imported. See also the documentation for the GetData method and for the parameter DATA for this method.
Warning: Under certain circumstances, data that is not imported but is already present in the system as an old value are canceled in this process.
If, for example, products A1 and A2 from plan version 001 are selected in the selection criterion SELECTION but table DATA only contains planning data for product A1, the planning data for A2 that is in version 001 and already in the system is canceled.
Parameters
OPERATINGCONCERN
TYPEOFPROFITANALYSIS
TESTRUN
SELECTEDFIELDS
SELECTION
DATA
RETURN
Exceptions
Function Group
KE_BAPI_COPAPLANNING
Thanks
SK

A problem when using a data element in BAPI

Hi there,
I build a function module, and want to use it as a BAPI. But when I add the function module as a method of a BAPI object, it gives me the following error: data type xxxxx cannot be used for methods.
I guess the problem happens because of the type of data element I used for the input parameter of the function module. Thus I tried many other data elements, but I keep getting the same error. I am really out of the game. Could anyone tell me which data element I should use for the input parameter of the function module? The function module has only one input parameter, which should be a string with length less than 100.
Thank you so much!!
Sincerely,
Bing

The function module has only one input parameter, which should be a string with length less than 256. (I tried many predefined data element like RPLM_STRING, but when I tried to add the function module as a method of BAPI, the SAP always gave me the error: data type xxxxx cannot be used for methods)
It only has one output parameter: RETURN (associated type: BAPIRETURN)
I am really not familiar with ABAP program, let alone BAPIs. Any suggestions would be very helpful to me. I sincerely appreciate your help.
Bing

Runtime Error while uploading data using a BAPI

Hi ALL,
    I am trying to upload duties for PO items using BAPI from a excel sheet.In this BAPI I am saving the data into a z table(Customizing table, maintenance only by cust., not SAP import).The data is getting saved into the table and it shows the data uploaded successfully message also,but when I scroll up I see RUN time error,althogh the data is getting saved.
        I have seen in the st22 and it shows the following information.
Internal error: Invalid page number.
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "ZFI_UPD_BOE_UPLOAD" had to be terminated because the
ABAP
processor discovered an invalid system state.
    My functional consultants opinion is after data getting saved it comes into me23n's condition tab.He has done it many times.But for one PO it is not showing.
    I checked the upload program.In upload program a BAPI is written which simply takes the data from a excelsheet and saves into the z table.
My query is whether we can show the data of a z table into standard tocde?

Thanks Lakshman!
           I debug the program.There is no BDC used update.In this program after taking the data from excel sheet one internal table is prepared and this internal table is directly used to insert data into z table.This is the last code which executes.
INSERT zmmpoamend FROM TABLE t_zmmpo_amend_tab.
IF sy-subrc EQ '0'.
    MESSAGE 'Data Upload Successfully completed' TYPE 'S'.
ELSE.
    ROLLBACK WORK.
    MESSAGE 'Data Upload failed ' TYPE 'E'.
ENDIF.
CLEAR t_zmmpo_amend_tab.
REFRESH t_zmmpo_amend_tab.
     Is it possible to configure z table using SPRO tcode,such that this z tables data will go to standard table and then we can see it in the standard tcode?
I am not sure but it's just a guess.

How to create a data filter for BAPI used in a Distribution Model ?

I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
Thanks - Mike

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'. Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

Data transfer using BAPI'S

please get me the detailed procedure ( including code) of any data transfer program using BAPI's

check the sample code....it is used to transfer the data to MM01 tcode.
*TO CREATE MATERIAL USING BAPI.
STRUCTURE DECLARATIONS *
TABLES: BAPIMATHEAD, "Headerdata
BAPI_MARA, "Clientdata
BAPI_MARAX, "Clientdatax
BAPI_MARC, "Plantdata
BAPI_MARCX, "Plantdatax
BAPI_MAKT, "Material description
BAPI_MBEW, "VALUATION DATA
BAPI_MBEWX,
BAPI_MARM,
BAPI_MARMX,
bapi_mean,
BAPIRET2. "Return messages
DATA:V_FILE TYPE STRING. "input data file
DATA:
BEGIN OF LSMW_MATERIAL_MASTER,
MATNR(018) TYPE C, "Material number
MTART(004) TYPE C, "Material type
MBRSH(001) TYPE C, "Industry sector
WERKS(004) TYPE C, "Plant
MAKTX(040) TYPE C, "Material description
DISMM(002) TYPE C, "Extra Field Added In the Program as itsrequired
MEINS(003) TYPE C, "Base unit of measure
MATKL(009) TYPE C, "Material group
SPART(002) TYPE C, "Division
LABOR(003) TYPE C, "Lab/office
PRDHA(018) TYPE C, "Product hierarchy
MSTAE(002) TYPE C, "X-plant matl status
MTPOS_MARA(004) TYPE C, "Gen item cat group
BRGEW(017) TYPE C, "Gross weight
GEWEI(003) TYPE C, "Weight unit NTGEW(017) TYPE C, "Net weight
GROES(032) TYPE C, "Size/Dimensions
MAGRV(004) TYPE C, "Matl grp pack matls
BISMT(018) TYPE C, "Old material number
WRKST(048) TYPE C, "Basic material
PROFL(003) TYPE C, "DG indicator profile
KZUMW(001) TYPE C, "Environmentally rlvt
BSTME(003) TYPE C, "Order unit
VABME(001) TYPE C,
EKGRP(003) TYPE C, "Purchasing group
XCHPF(001) TYPE C, "Batch management
EKWSL(004) TYPE C, "Purchasing key value
WEBAZ(003) TYPE C, "GR processing time
MFRPN(040) TYPE C, "Manufacturer part number
MFRNR(010) TYPE C, "Manufacturer number
VPRSV(001) TYPE C, "Price control indicator
STPRS(015) TYPE C, "Standard price
BWPRH(014) TYPE C, "Commercial price1
BKLAS(004) TYPE C, "Valuation class
bwkey(004) type c,
END OF LSMW_MATERIAL_MASTER.
INTERNAL TABLE DECLARATIONS *
*to store the input data
DATA:
BEGIN OF it_matmaster OCCURS 0.
INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.
DATA:
END OF it_matmaster.
*for material description
DATA:BEGIN OF IT_MATERIALDESC OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT .
DATA:END OF IT_MATERIALDESC.
*FOR gross wt
data: begin of it_uom occurs 0.
include structure BAPI_MARM.
data:end of it_uom.
DATA: BEGIN OF IT_UOMX OCCURS 0.
INCLUDE STRUCTURE BAPI_MARMX.
DATA:END OF IT_UOMX.
data:begin of it_mean occurs 0.
include structure bapi_mean.
data:end of it_mean.
DATA:BEGIN OF IT_MLTX OCCURS 0.
INCLUDE STRUCTURE BAPI_MLTX.
DATA:END OF IT_MLTX.
*to return messages
DATA:BEGIN OF IT_RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA:END OF IT_RETURN.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .
AT SELECTION SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
TO UPLOAD THE DATA *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = V_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = IT_MATMASTER
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ELSE.
*DELETE IT_MATMASTER INDEX 1.
ENDIF.
DATA POPULATIONS *
LOOP AT IT_MATMASTER.
*HEADER DATA
BAPIMATHEAD-MATERIAL = IT_MATMASTER-MATNR.
BAPIMATHEAD-IND_SECTOR = IT_MATMASTER-Mbrsh.
BAPIMATHEAD-MATL_TYPE = IT_MATMASTER-Mtart.
BAPIMATHEAD-BASIC_VIEW = 'X'.
BAPIMATHEAD-PURCHASE_VIEW = 'X'.
BAPIMATHEAD-ACCOUNT_VIEW = 'X'.
*CLIENTDATA
BAPI_MARA-MATL_GROUP = IT_MATMASTER-MATKL.
BAPI_MARA-DIVISION = IT_MATMASTER-SPART.
BAPI_MARA-DSN_OFFICE = IT_MATMASTER-LABOR.
BAPI_MARA-PROD_HIER = IT_MATMASTER-PRDHA.
BAPI_MARA-PUR_STATUS = IT_MATMASTER-MSTAE.
BAPI_MARA-ITEM_CAT = IT_MATMASTER-MTPOS_MARA.
BAPI_MARA-NET_WEIGHT = IT_MATMASTER-NTGEW.
BAPI_MARA-PO_UNIT = 'KG'.
BAPI_MARA-UNIT_OF_WT_ISO = 'KG'.
BAPI_MARA-UNIT_OF_WT = 'KG'.
BAPI_MARA-PACK_VO_UN = 'KG'.
BAPI_MARA-BASE_UOM_ISO = 'KG'.
bapi_mara-size_dim = it_matmaster-groes.
BAPI_MARA-MAT_GRP_SM = IT_MATMASTER-MAGRV.
BAPI_MARA-OLD_MAT_NO = IT_MATMASTER-BISMT.
BAPI_MARA-BASE_UOM = IT_MATMASTER-MEINS.
BAPI_MARA-BASIC_MATL = IT_MATMASTER-WRKST.
BAPI_MARA-HAZMATPROF = IT_MATMASTER-PROFL.
BAPI_MARA-ENVT_RLVT = IT_MATMASTER-KZUMW.
BAPI_MARA-PO_UNIT = IT_MATMASTER-BSTME.
BAPI_MARA-VAR_ORD_UN = IT_MATMASTER-VABME.
BAPI_MARA-PUR_VALKEY = IT_MATMASTER-EKWSL.
BAPI_MARA-MANU_MAT = IT_MATMASTER-MFRPN.
BAPI_MARA-MFR_NO = IT_MATMASTER-MFRNR.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-DIVISION = 'X'.
BAPI_MARAX-DSN_OFFICE = 'X'.
BAPI_MARAX-PROD_HIER = 'X'.
BAPI_MARAX-PUR_STATUS = 'X'.
BAPI_MARAX-ITEM_CAT = 'X'.
BAPI_MARAX-NET_WEIGHT = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-UNIT_OF_WT_ISO = 'X'.
bapi_maraX-size_dim = 'X'.
BAPI_MARAX-MAT_GRP_SM = 'X'.
BAPI_MARAX-OLD_MAT_NO = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-BASE_UOM_ISO = 'X'.
BAPI_MARAX-BASIC_MATL = 'X'.
BAPI_MARAX-MFR_NO = 'X'.
BAPI_MARAX-HAZMATPROF = 'X'.
BAPI_MARAX-ENVT_RLVT = 'X'.
BAPI_MARAX-PO_UNIT = 'X'.
BAPI_MARAX-PACK_VO_UN = 'X'.
BAPI_MARAX-VAR_ORD_UN = 'X'.
BAPI_MARAX-PUR_VALKEY = 'X'.
BAPI_MARAX-MANU_MAT = 'X'.
BAPI_MARAX-MFR_NO = 'X'.
*PLANT DATA
BAPI_MARC-PLANT = IT_MATMASTER-WERKS.
BAPI_MARC-PUR_GROUP = IT_MATMASTER-EKGRP.
BAPI_MARC-BATCH_MGMT = IT_MATMASTER-XCHPF.
BAPI_MARC-GR_PR_TIME = IT_MATMASTER-WEBAZ.
BAPI_MARCX-PLANT = IT_MATMASTER-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
BAPI_MARCX-BATCH_MGMT = 'X'.
BAPI_MARCX-GR_PR_TIME = 'X'.
*VALUATION DATA
BAPI_MBEW-PRICE_CTRL = IT_MATMASTER-VPRSV.
BAPI_MBEW-STD_PRICE = IT_MATMASTER-STPRS.
BAPI_MBEW-COMMPRICE1 = IT_MATMASTER-BWPRH.
BAPI_MBEW-VAL_AREA = IT_MATMASTER-BWKEY.
BAPI_MBEW-VAL_CLASS = IT_MATMASTER-BKLAS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-COMMPRICE1 = 'X'.
BAPI_MBEWX-VAL_AREA = IT_MATMASTER-BWKEY.
BAPI_MBEWX-VAL_CLASS = 'X'.
IT_MATERIALDESC-LANGU = 'EN'.
IT_MATERIALDESC-MATL_DESC = IT_MATMASTER-MAKTX.
append IT_materialdesc.
IT_UOM-GROSS_WT = IT_MATMASTER-BRGEW.
IT_UOM-ALT_UNIT = 'KG'.
IT_UOM-ALT_UNIT_ISO = 'KG'.
IT_UOM-UNIT_OF_WT = IT_MATMASTER-GEWEI.
APPEND IT_UOM.
IT_UOMX-GROSS_WT = 'X'.
IT_UOMX-ALT_UNIT = 'KG'.
IT_UOMX-ALT_UNIT_ISO = 'KG'.
IT_UOMX-UNIT_OF_WT = 'X'.
APPEND IT_UOMX.
it_mean-unit = 'KD3'.
append it_mean.
it_mltx-langu = 'E'.
it_mltx-text_name = it_matmaster-matnr.
APPEND IT_MLTX.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = BAPIMATHEAD
CLIENTDATA = BAPI_MARA
CLIENTDATAX = BAPI_MARAx
PLANTDATA = BAPI_MARc
PLANTDATAX = BAPI_MARcx
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA = BAPI_MBEW
VALUATIONDATAX = BAPI_MBEWX
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = IT_RETURN
TABLES
MATERIALDESCRIPTION = IT_MATERIALDESC
UNITSOFMEASURE = IT_UOM
UNITSOFMEASUREX = IT_UOMX
INTERNATIONALARTNOS = it_mean
MATERIALLONGTEXT = IT_MLTX
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
read table it_return with key TYPE = 'S'.
if sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
*else.
*CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
RETURN =
endif.
WRITE:/ IT_RETURN-TYPE,
2 IT_RETURN-ID,
22 IT_RETURN-NUMBER,
25 IT_RETURN-MESSAGE.
IT_RETURN-LOG_NO,
IT_RETURN-LOG_MSG_NO,
IT_RETURN-MESSAGE_V1,
IT_RETURN-MESSAGE_V2,
IT_RETURN-MESSAGE_V3,
IT_RETURN-MESSAGE_V4,
IT_RETURN-PARAMETER,
IT_RETURN-ROW,
IT_RETURN-FIELD,
IT_RETURN-SYSTEM.
ENDLOOP.[/code]
Reward if useful.
Dara.

COR2 (Change Process Order) Upload & Data Change Using BAPI OR RFC

Dear Experts,
I want to change the Transaction cor2(Change Process Order) material 1st line quantity, after that i have to upload records from line 2. I have all the data in itab. Will you people please have a suggestion to change and Upload data at the same time in a single program using some BAPI or RFC.
Which BAPI or RFC will be helpfull in this regards.
Thanks,
Sohail

I have done it through BDC recording, change on first line, then upload using bdc from 2nd line.

How can forbid changing data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~

you have to find out what the user did before your program goes ahead and starts the BAPI.

Data tranfer using bapi(lsmw)

please explain the steps that are used to upload legacy data into sap using lsmw (bapi method)
Message was edited by:
neela renganathan

Hi,
is step by step process .
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed:
Please Go through these Links ,
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
Regards

How can forbid changging data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~
Edited by: lorryhappy on Dec 22, 2009 11:35 AM

Hi
You can achieve it in another way..
Before Passing Data to BAPI , Check whether the material is existing or not..
If material is existing (Present in Material Master Tables e.g. MARA ) using
data: l_matnr like mara-matnr.
Select single matnr from mara into l_matnr.
IF sy-subrc EQ 0.
" Material is existing ==> Do Not Pass to BAPI
else.
" Material is NOT existing ==> Pass to BAPI for creation.
endif.
Repeat above logic for every material in batch..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Mobile number is not uploading for BP master data creation using BAPI ?

Hi,
I am creating Business Partner Master data in ISU/CCS using the BAPI "BAPI_ISUPARTNER_CREATEFROMDATA". Uploading data from Excel.
Successfully uploading and creating new Business Partners apart from Mobile number, nick name,middle name, and name of birth fields.
There are 2 issues i am facing:
1. There is no field name is called Mobile number (data element AD_MBNMBR1) in structures of that BAPI.
2. Nick, middle and birth names fields are there, but they are under the Expand(+ symbol) in FPP2 (FPP1) Tcode. That's why these fields are not uploading.
How to upload them?
Please help me out.
Thanks
Sarayu Parvathaneni.

Hello Roopesh,
Ususally, to make the BAPI update the database, you have to run BAPI
BAPI_TRANSACTION_COMMIT after BAPI_PRDSRVAPS_SAVEMULTI2 is executed.
In se37-> You may insert
BAPI_PRDSRVAPS_SAVEMULTI2
BAPI_TRANSACTION_COMMIT
in the Menu-->function module >test>test sequences.
Also as Mani said, if the update is successful the return parameter will be '0'.
Regards,
Ademola

ISU Business Partner Master data Upload using BAPI?

Hi Experts,
I used BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to upload ISU Business Partner master data.
This BPAI is not uploading the following topics:
1. Communication Address like Telephone,extension, email and etc., are not uploading.
2. Middle name, nick name etc, the field which are under the Expand symbol not uploading.
3. Reference customer also not uploading.
strctures what I used are:
for communication : TELEFONDATANONADDRESS, E_MAILDATANONADDRESS
general data : BAPIISUBPD
Reference customer: BAPIBPPARA-MUSTER_KUN
I am passing all the data but not uploading some of the field values (above) using that BAPI.
Could you please let me know the solution?
Please help me out!
Thanks in advance.
sekhar

Sekhar:
Try with below details:
for communication : BAPIISUBPA & BAPIISUBPAX.
general data : BAPIISUBPD & BAPIISUBPDX
Reference customer: BAPIISUBPA-BP_EXT & BAPIISUBPDX-BP_EXT
Thanks,
Murali.

How to Fill custom table data using standrad BAPI

Hello Team,
I have some clarification on usage of Standard BAPI : BAPI_Material_savereplica.
I have some custom fields in MARA and MARC tables so i have used BAPIExtensionin and able to pass custom field of MARA and MARC.
My issue is in material master the MARC custom fields of a material are going to update in a Z table along with MARC table.
So can we achieve this functionalioty using BAPI : BAPI_Material_savereplica menas can we upadate custom table by using standarda bapi
Please let me know the available options ..

Hi Some,
You are saying most of the data is resides out of sap, then you try with mapping of those data in sap standard tables if match or if not then develop a custom interface which will read data from outside & will put in your pay roll processor interface,
and normally your SAP data you can interface through PU12.
If you want single interface then you need to develop unique interface program.
All the best.

Pulling Table data with a BAPI

Hi:
Looking for BAPI to pull data from Tables in the back end.

Hi Jo,
As I see, both the model node and the Value node has the same structure. In that case try using the copy service API for copying sll the values from ur model node to value node. The statement is
WDCopyService.copyElements(wdContext.node<ModelNodename>,wdContext.node<ValueNodename>);
This should work
Regards,
Poojith M V

Date fm or bapi

Similar Messages

Maybe you are looking for