Date usage and data roaming

on my palm pixi plus theres am option to turn data usage on or off and enable or disable data roaming, i understand i need data usage on or it will not connect to the internet, however what does data roaming do? still works fine when its disabled so im wondering whats the difference?
many thanks
Post relates to: Pre Plus p100una (AT&T)

Roaming on other carrier's data networks.

Similar Messages

IPhone 5 - Excessive data usage and data "bleed"

We recently upgraded my daughter's phone from a Samsung to an iPhone 5, originally running iOS 6, now running iOS 7. The Samsung (Android) phone used less than .5 MB per month, whereas the iPhone 5 will consume that much data in one day. About 80% of the phone's usage is on WiFi, and is only actively used on the cellular network less than an hour a day. However, the phone and the Verizon data usage log show data being consumed even when connected continously to wifi.
With help from a Verizon representative, we turned off location services, closed all background apps and stopped automatic updates and refreshes, shut off icloud, email, and anything else that could possibly be running in the background or consuming data. The changes didn't do anything to slow the usage, and the Verizon reps suggested that my daughter was secretly using her phone in the middle of the night to play games and watch movies. At Verizon's recommendation, we signed up for parental controls, and set them to prevent the phone from being used during the school day, and at night. However, the phone and Verizon continue to show data use in tiny increments 24 hours per day. These post in the Verizon data usage logs about every 10 minutes, and are typically 10-20KB.
Using the parental controls, I set a hard data stop each week so that we could meter her data out over a month's time and prevent overages. It is supposed to stop all data usage on the phone once she reaches a preset limit. She would usually hit the 1GB limit in a day or two, but the phone and Verizon's data usage log show that the phone continues to bleed data 24 hours per day even after the limit is reached and she is unable to use her phone. Verizon can offer no explanation.
In addition to the data bleed, the actual data usage for virtually any activity that required data is substantially higher than what I would see for the same use on my iPhone 4s. For example, a couple of youtube videos played on her iPhone 5 resulted in 0.8GB being used in just a few minutes, vs about 50MB on my 4s for the same videos. Verizon seems to suggest that this is due to the higher resolution and speed, but it seems excessive.
Here's a Youtube video I found that seems to show our exact issue. We've done similar tests on our phone, with the same results.
http://www.youtube.com/watch?v=q9AR2rEFcKk
Although it is frequently suggested that the "fix" for this problem is to turn off cellular, that hardly addresses the problem. It would also mean we have purchased a very expensive iPod.
Is there anyone who can help us address this issue? Verizon has been no help, and does not acknowledge this as an ongoing problem, despite the fact that there are countless articles, blogs, and videos online about the very same issue. We have tried a number of the "fix" recommendations we've found online, but thus far have had no success.

There's something wrong. Have you tried the 4 Rs basic troubleshooting steps?
Restart:
1. Press and hold the Sleep/Wake button until the red "slide to power off" slider appears, and then slide the slider.
2. Press and hold the Sleep/Wake button until the Apple logo appears.
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414
This article is about battery life, there are a few tips about data usage as well.
http://www.apple.com/batteries/iphone.html
Data settings & usage
http://support.apple.com/kb/HT4146
If all failed, make an appointment with the Apple genius at your local Apple Store and have them evaluate.

Data usage and battery drain has skyrocketed with iOS 8.1.2 (maybe earlier)

3 weeks ago my wife got a text message on her iPhone 5 from AT&T that she had used 90% of her data for the month. 30 seconds later, she got another one saying that she had used 100%. Granted, her data plan is small, 200 MB. But, for the last two years she has used as little as 17 MB in a month and her largest prior to this latest month was 49 mb. This month she got to 380 mb before we were able to shut off her cell data. Otherwise, a second chunk of 200 MB and another $15 would have been added to the month.
We had noticed that her battery had been draining rather rapidly in standby mode with no background apps running when she didn't have access to WiFi. We have now correlated the two results, High Cell data usage, Quick battery drain and very warm phone. In case anyone is wondering about her iPhone 5 being one in the recall, it is. I took it in and had it tested. Apple says the battery is fine. It does hold a charge well. When all network communications are shut down on her phone and it is in standby mode, there is no noticeable loss of charge in 24 hours (our longest test).
Since I have a grandfathered Unlimited Data Plan with AT&T, I have been doing some testing on my iPhone 5s. Sure enough, I've seen similar results. With nearly everything turned off except Cell Data, I've seen 483 MB used in 24 hours. Of that total, 479 MB was used for Documents & Sync. I even have everything turned off in my iCloud account, Location services are turned off, no push notifications etc...
The best I can figure, this has been a problem since we installed 8.1.2 and yesterday I installed 8.1.3 resulting in no positive effect on this issue.
At this rate of data usage and no access to WiFi, my wife would have to have a 15 Gb data plan to keep from exceeding her limit. I don't think AT&T even offers one that big anymore. I might have to switch to Sprint or T-Mobile if this doesn't get resolved.
Any ideas would be greatly appreciated. Thanks in advance for your shared insights.

Hey this is Brian, bjmcmurry, under a different user ID. If I logged in as bmcmurry, original post, I was just getting a server error and couldn't get to this discussion nor post a comment anywhere.
Anyway, let me be as brief as I can. After an extensive analysis of replicating the problem on another phone to eliminate it being a hardware specific issue and that the test phone has an unlimited data plan, I was able to stop the excessive data usage and consequential battery drain. I believe I have a reasonable explanation of the problem, an iOS logic bug.
I had everything under my control clamped down on the test phone to minimize data usage. Also, I was forcing all data usage to use the cell towers. I determined that I was burning at least 11 to 13 Mb per hour doing nothing important. I literally had everything turned off except 'Settings' was allowed to use Cell data providing a avenue to log into the Apple ID.
The two phones had 2 things in common, they were using the same Apple ID and the same version of the OS. One was a iPhone 5 and the other was a 5s.
Here is a synopsis of my experience via my written evaluation of the Apple support system (Apple Rep name's have been removed):
After a couple of hours on the phone with an Apple Care Senior support Analyst, it was suggested that I go to the Apple Store to 1) get my battery replace in the iPhone 5 since it qualified for the replacement program and 2) see if the Genius could provide me with any insight in the data usage issue and battery drain.
I'm certainly glad I had multiple reasons to visit the closest Apple store, a 45 min drive. I got the battery replaced, thanks for that.
Regarding the important issue to me that brought me to the Genius Bar, excessive Cell data usage, I thought the Genius did a wonderful job listening and documenting the problem we were experiencing. Unfortunately, educating us on the use of the product or replacing our phone was not going to solve the problem. He eventually figured it out, this was not a user error or broken hardware. We surmised that the reason I was sent to him was to verify and document that there was a problem. I clearly had a problem. After writing copious notes on the issue, The Genius smartly referred me back the the AppleCare Senior Advisor. So, back to AppleCare Senior Analyst I went. She, knowing this was not a simple problem to solve i.e. beyond her level of expertise, got an Apple Software engineer involved.
My primary frustration is that this should have been escalated to software engineering right away. My trip to see the Genius was, I believe, a waste of time for both me and Apple regarding this issue. Diagnosis of this type of problem is well beyond the Genius’ knowledge and job. The Genius did a very good job doing what he could within the scope of his job. He just couldn’t solve this problem and had no one within Apple to which he had access for help.
However, that initial consult with the engineer was a bit feeble. Not only could I not talk to him/her directly, his/her focus was still working with the ‘Black Box' approach. Having Analyst ask me to do stuff like restore the Phone was more like trying to find a 'work around' than 'identifying the real problem.' Maybe restoring the phone was going to fix some corrupted data on the phone sidesteping the real problem, the handling of this condition. The engineer did listen to the fact that I had restored the test phone, the 5s, and only added the use of my Apple ID. Duh, been there!!!
Having been an previous owner of a software development company that I started in 1980 and retired in 2001, I can tell you that using the 'Black Box' method of debugging is extremely inefficient. Instead, having access to an ‘Activity Manager’ type app to identify in real time what process was blowing up the data flow would have saved me a lost afternoon at the Apple store and hours on the phone with tech support.
Ironically, I may have stumbled onto a "work around" solution short of turning off Cell Data that stopped the excessive Cell Data usage and consequential battery drain. Just prior to leaving the Apple Store, I used one of their Macs to log in my Apple ID on the id.apple.com website to ‘Manage my Apple ID’, I was forced to upgrade the security level of my password. Afterward, my cell data usage seemed to drop dramatically.
I told the AppleCare Senior Analyst that I may have stumbled onto a workaround and I suggested that I give it a couple of days of monitoring. We'd talk then and I would have results to report. She agreed.
Sure enough, my Document & Sync usage was back to normal, about 1/2 Mb per day. Am I happy that the excessive Cell Data usage has stopped? You bet! But, there was no intuitive reason that an end user would know to log in on the ID website to unknowingly solve this problem. As I use to say to my employees, that is not the ‘Macintosh Way.’ And, rebooting the the 'Microsoft Way.'
When I reported my findings to the Analyst, we both concluded that data usage was back to normal. She did report to me that the engineer did provide a laundry list of suggested activities to help solve the problem. Remarkably, they were everything that I had already done and were pretty much what the Analyst and the Genius tried to do. All reasonable tasks. But clearly, the engineer hadn't even ready the notes on the case before responding. And, none of the things suggested would have uncovered the real problem, likely a logic bug in iOS.
My advice now is to have the software engineering team rule out that there was an unresolvable state that a background process was fiercely trying to handle. The iOS does not seem to know how to intervene and prompt the user with a requirement to upgrade their password. If this does end up being the case, I would call it a logic bug, a perpetual exception that is not being handled properly.
Anyway, I hope this helps you.

AVAudioRecorder data usage and sound quality

Witch is the best setting to the right mix of file size(data usage) and sound quality(ability to hear the conversation) when we work with AVAudioRecorder.
Thanks
Willy

AntonBecker wrote:
Alternatively, I can avoid the overage fees by agreeing to change my plan -- increase my monthly allowance -- but I have to pay the difference for all of the months that have already gone by all the way back to the beginning of my contract. In other words, I have to pay for additional GBs for months that are in the past and for which I have no possible way to actually use that data allowance. This is NOT TRUE. You can have the change backdated to the BEGINNING of your CURRENT billing cycle but it WILL NOT go further back than that.
I must say, that as a business model for raking in un-earned revenue, it's pretty impressive. As a customer, though, I'm not terribly impressed.
Does anyone else feel that these practices are just a wee bit unfair, to put it mildly?
I would think that the following would be fair business practices:
(1) If I don't use some GB data allowance, for which I've already paid, then that allowance should roll into the next month OR; Verizon doesn't have roll over minutes and they most likely will not have roll over data.
(2) I should get a refund for data allowance that I don't use. Should you ALSO get a refund for unused minutes while you are at it? I don't watch all of the channels for which my cable company charges me. I would prefer a refund for THOSE before I get a refund for minutes/data from Verizon. I would make a considerably larger refund with that.
(3) Alternatively, since Verizon believes it is OK to charge extremely inflated overage fees, then I feel it's only fair that they refund to me, at that inflated rate, for GBs that I don't use in any given month.
How do the rest of you feel? I feel you should most likely look for a provider which better fits your view on how they should price their service. Good luck.
Sincerely frustrated,
Anton

How to save on data usage and connect to wireless at home

How do I switch off my mobile data usage and switch over to my wireless at home to save on my data plan?

menu/settings/wi-fi, view networks, select/encryption/code

ODI Data Profiling and Data Quality

Hi experts,
Searching about ODI features for data profiling and data quality I found (I think) many ... extensions? for the product, that confuse me. Cause I think there are at least three diferents ways to do data profiling and data quality:
In first place, I found that ODI has out of the box features for data profiling and data quality, but, acording to the paper, this features are too limited.
The second way I found was the product Oracle Data Profiling and Oracle Data Quality for Oracle Data Integrator 11gR1 (11.1.1.3.0) that is in the download page of ODI. Acording to the page, this product extends the existing inline Data Quality and Data profiling features of ODI.
Finally, the third way is Oracle Enterprise Data Quality that is another product that can be integrated to ODI.
I dont know if I understood good my alternatives. But, in fact, I need a general explanation of what ODI offer to do Data Quality and Data profiling. Can you help me to understand this?
Very thanks in advance.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Data archiving and data cleansing

hi experts,
Can any one tell me step by step guide for Data archiving and Data cleansing of SAP-ISU Object.
what is the difference between Data archiving and Data cleansing .
Thanx & Rgds

Data Archiving: So many objects are there you can look some of them..........
ISU_BBP IS-U Archiving: Budget Billing Plan
ISU_BCONT Business Partner Contacts (Contract A/R + A/P)
ISU_BILL IS-U Archiving: Billing Document Header
ISU_BILLZ IS-U Archiving: Billing Line Item
ISU_EABL IS-U Archiving: Meter Reading Results
ISU_EORDER IS-U Archiving: Waste Disposal Order
ISU_EUFASS Archiving of Usage Factors
ISU_FACTS Installation Facts
ISU_INSPEC IS-U Archiving: Campaigns for Inspection List
ISU_PPM Prepayment Documents
ISU_PRDOCH IS-U Archiving: Print Document Header
ISU_PRDOCL IS-U Archiving: Print Document Line Item
ISU_PROFV IS-U Archiving: EDM Profile Values
ISU_ROUTE IS-U Archiving: Waste Disposal Route
ISU_SETTLB Settlement Document
ISU_SWTDOC Archive Switch Document
Go to SARA t-code and enter the object CA_BUPA for business partner then Press F6 you will get step by step documentation. please follow the procedure for all the objects.
Regards,
Siva

Odi-data quality and data profiling

Would odi-ee license be sufficient to use,odi data quality and data profiling.
We plan to use odi to migrate data from legacy databases to oracle 11g data base.
Do we have to use odi data quality and profiling.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Difference b/w DATA TYPE and DATA OBJECT & differences b/w TYPE and LIKE

hai
can any one say the differences between Data type and Data Object.
And also differences between TYPE and LIKE
thanks
Gani

hi,
_Data Types and Data Objects_
      Programs work with local program data that is, with byte sequences in the working memory. Byte sequences that belong together are called fields and are characterized by a length, an identity (name), and as a further attribute by a data type. All programming languages have a concept that describes how the contents of a field are interpreted according to the data type.
      In the ABAP type concept, fields are called data objects. Each data object is thus an instance of an abstract data type. There are separate name spaces for data objects and data types. This means that a name can be the name of a data object as well as the name of a data type simultaneously.
Data Types
   As well as occurring as attributes of a data object, data types can also be defined independently. You can then use them later on in conjunction with a data object. The definition of a user-defined data type is based on a set of predefined elementary data types. You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary. You can use your own data types to declare data objects or to check the types of parameters in generic operations.
     All programming languages distinguish between various types of data with various uses, such as .. type data for storing or displaying values and numerical data for calculations. The attributes in question are described using data types. You can define, for example, how data is stored in the repository, and how the ABAP statements work with the data.
Data types can be divided into elementary, reference, and complex types.
a. Elementary Types
These are data types of fixed or variable length that are not made up of other types.
The difference between variable length data types and fixed length data types is that the length and the memory space required by data objects of variable length data types can change dynamically during runtime, and that these data types cannot be defined irreversibly while the data object is being declared.
Predefined and User-Defined Elementary Data Types
You can also define your own elementary data types in ABAP using the TYPES statement. You base these on the predefined data types. This determines all of the technical attributes of the new data type. For example, you could define a data type P_2 with two decimal places, based on the predefined data type P. You could then use this new type in your data declarations.
b. Reference Types
Reference types are deep data types that describe reference variables, that is, data objects that contain references. A reference variable can be defined as a component of a complex data object such as a structure or internal table as well as a single field.
c. Complex Data Types
Complex data types are made up of other data types. A distinction is made here between structured types and table types.
Data Objects
      Data objects are the physical units with which ABAP statements work at runtime. The contents of a data object occupy memory space in the program. ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type.. For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
       Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type). You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures). As well as fields in the memory area of the program, the program also treats literals like data objects.
        A data object is a part of the repository whose content can be addressed and interpreted by the program. All data objects must be declared in the ABAP program and are not persistent, meaning that they only exist while the program is being executed. Before you can process persistent data (such as data from a database table or from a sequential file), you must read it into data objects first. Conversely, if you want to retain the contents of a data object beyond the end of the program, you must save it in a persistent form.
Declaring Data Objects
      Apart from the interface parameters of procedures, you declare all of the data objects in an ABAP program or procedure in its declaration part. These declarative statements establish the data type of the object, along with any missing technical attributes. This takes place before the program is actually executed. The technical attributes can then be queried while the program is running.
     The interface parameters of procedures are generated as local data objects, but only when the procedure is actually called. You can define the technical attributes of the interface parameters in the procedure itself. If you do not, they adopt the attributes of the parameters from which they receive their values.
ABAP contains the following kinds of data objects:
a. Literals
Literals are not created by declarative statements. Instead, they exist in the program source code. Like all data objects, they have fixed technical attributes (field length, number of decimal places, data type), but no name. They are therefore referred to as unnamed data objects.
b. Named Data Objects
Data objects that have a name that you can use to address the ABAP program are known as named objects. These can be objects of various types, including text symbols, variables and constants.
Text symbols are pointers to texts in the text pool of the ABAP program. When the program starts, the corresponding data objects are generated from the texts stored in the text pool. They can be addressed using the name of the text symbol.
Variables are data objects whose contents can be changed using ABAP statements. You declare variables using the DATA, CLASS-DATA, STATICS, PARAMETERS, SELECT-OPTIONS, and RANGESstatements.
Constants are data objects whose contents cannot be changed. You declare constants using the CONSTANTSstatement.
c. Anonymous Data Objects
Data objects that cannot be addressed using a name are known as anonymous data objects. They are created using the CREATE DATAstatement and can be addressed using reference variables.
d. System-Defined Data Objects
System-defined data objects do not have to be declared explicitly - they are always available at runtime.
e. Interface Work Areas
Interface work areas are special variables that serve as interfaces between programs, screens, and logical databases. You declare interface work areas using the TABLES and NODESstatements.
What is the difference between Type and Like?
Answer1:
TYPE, you assign datatype directly to the data object while declaring.
LIKE,you assign the datatype of another object to the declaring data object. The datatype is referenced indirectly.
Answer2:
Type is a keyword used to refer to a data type whereas Like is a keyword used to copy the existing properties of already existing data object.
Answer3:
type refers the existing data type
like refers the existing data object
reward if useful
thanks and regards
suma sailaja pvn

Data Integrator and Data Quality

Hi,
I worked on BI 7.0 and now exploring Business objects. I wanted to know how Data Integrator and Data Quality products relate to SAP BI 7. What is the purpose of using them. Is this integration and quality features not embedded in SAP BI 7.

BI and Data Services share many integration features, but Data Service provides better connectivity to third party data sources. The data quality features of Data Services are not available in BI.

Data integrator for HP-UX missing data quality and data profiling

Hi All,
I have installed ODI 10.1.3.40.0 from odi_unix_generic_10.1.3.4.0.zip in HP unix 11.23.
Data quality and data profiling is missing in that zip ? Could anyone please help me how to get installer of data quality and data profiling for Oracle data integrator in HP UX 11.23.
Any response will be highly appreciated.
Thanks in advance.
regards
Umapada
Edited by: user10612738 on Nov 28, 2008 1:54 AM

The integrated packaged( ODi, data quality and data profiling) for HP-UX wount available till 10.1.3.5.0 which will be released by this year end.

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Is there a way to manually custom-edit the "Date created" and "Date modified" attributes of files in Mac OS 10.6?

In "List View" in a Finder window, among the many column options are "Date created" and "Date modified." In "View Options" (command-J) for any folder, one can add these columns, along with the standard ones "Size," "Kind," "Label," etc.
A user can alter a file's name, and a file's "label" (i.e. its color). On the other hand, a user can NOT arbitrarily edit/alter a file's official "size" -- other than by physically altering the contents of the file itself, obviously.
But what about a file's "Date created" and "Date modified"? Can either of those be manually edited/changed, just as a file's name can be changed -- or is a file's creation-date an immutable attribute beyond the editorial reach of the user, just as a file's "size" is?
And yes, a person can "alter" a file's "Date modified" by simply modifying the file, which would change its "Date modified" to be the moment it was last altered (i.e. right now). But (and here's the key question) can a user somehow get inside a file's defining attributes and arbitrarily change a file's modification date to be at any desired point in the past that's AFTER its creation date and BEFORE the present moment? Or will so doing cause the operating system to blow a gasket?
If it is possible to arbitrarily manually alter a file's creation date or modification date, how would it be done (in 10.6)? And if it is NOT possible, then why not?

sanjempet --
Whew, that's a relief!
But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started!

I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

If you never backed up your phone to iTunes and never backed it up to iCloud all of your content is gone forever.

Data Carriers and Data carrier type

Hi Sap Gurus,
Pls let me know is there any necesssity of defining any new Data Carrier types other than PC,
if so at what circumstances and requirements,
also pls throw some light about data Carriers, when is the new data carriers required to be created
at what circumstances and requirements.
is that to access a document from different server or Different system, if it is so why is this required as the documents are always stored in a central content server and Once checked in, any one can access the document from Server,
2) can we make use of Application softwares Installed in one System and make it run in another system, example,
if there are say 4 system totally, among this S1 system1 has Autocad Installed in it ,
rest of the 3 system have not installed Autocad, Can the system 2,3 and 4 edit the auto cad drawings in there system, does at this situations where Datacarries and Data carries types come in to picture,
Please throw some light on this
Thanks and regards
Sathish

Dear Christoph Hopf,
Thanks a lot for your Quick Response
as you have Explained,i assume it is mainly used to store a local copy or extra copy of the Original application files in the system which we use to View them, or if we feel to store the copy in any other system also.
Example Say there are 3 systems S1, S2 and S3
if we are viewing an original file in System S1 and want the same Copy to be stored in System S2 or S3.....
then this data carrier configuration is required if iam right?
But Sir apart from this funtionality can i also know the SAP definition purpose, as it defines data carrier type as below
The system requires the data carrier type in order to exchange data with other data carriers.
This is the case, for example, if the user:
wants to process original application files stored on another computer
wants to use an application installed on another computer
if i can interpret this in right way
it tells us that, by use of data carrier and Data carrier types
we can access a original file stored in Different systems,
if it is so why is this required as the documents are always stored in a central content server and Once checked in, any one can access the document from Server,
2) can we make use of Application softwares Installed in one System and make it run in another system, example,
if there are say 3 system totally, among this S1 system1 has Autocad Installed in it ,
rest of the 2 system have not installed Autocad, Can the system 2, and 3 edit the auto cad drawings in there system, does at this situations where Datacarries and Data carries types come in to picture,
if so how is this made possible?
pls explain with example or Screen shots in Wiki if possible
can u tell me what is the difference between Datacarrier and Datacarrier types with any examples as well
Thanks and regards
Sathish
Edited by: sathish kumar on May 22, 2008 2:17 AM

Date usage and data roaming

Similar Messages

Maybe you are looking for