Date validation on selm screen

Hi
On selection selection screen user has selection field DATE by default sy-datum. i.e 6.10.2008
Now I should validate it i.e user can enter only last five days i.e .6.10.08 to 2.10.08
If user enters 1.10.08 he should get an error on selection screen .
Have A Pleasant Day.

Hi...
Check this simple logic..,
data: today like sy-datum.
today = sy-datum.
parameter: date like sy-datum default today.
at selection-screen.
today = sy-datum - 5.
if date < today.
error message.
elseif date > sy-datum.
error message.
endif.
Thanks,
naveen.I

Similar Messages

Multiple select options validation at selection screen

Hi,
I have the requirement to create a selection screen with 3 select options. Two of them are cross-dependent. It is mandatory to fill one of them and it is not allowed to fill both. The third one is optional. I tried the validation at selection-screen on block... and I have a problem that search help buttons for select options react like execution buttons, when I press any of them I am getting one of errors instead of search help.
Any help on this issue would be appreciated.
Here is my code:
DATA:
      so_rbkp TYPE rbkp,
      so_mseg TYPE mseg.
SELECTION-SCREEN BEGIN OF BLOCK blok WITH FRAME.
SELECT-OPTIONS:
        s_fakt   FOR so_rbkp-belnr,
        s_matdok FOR so_mseg-mblnr,
        s_god FOR so_mseg-gjahr.
SELECTION-SCREEN END OF BLOCK blok.
INITIALIZATION.
SET TITLEBAR '0100'.
START-OF-SELECTION.
AT SELECTION-SCREEN on block blok.
      if s_fakt <> space and s_matdok <> space.
        MESSAGE 'Message1' TYPE 'E'.
      elseif s_fakt = space and s_matdok = space.
        MESSAGE 'Message2' TYPE 'E'.
      endif.
    ENDIF.

Only perform the check when user wants to execute or submit the program, not when pressing F4 or even Enter, but in a selection-screen event, before START-OF-SELECTION which were program would terminate in error :
TABLES: SSCRFIELDS.
AT SELECTION-SCREEN OB BLOCK b01.
    IF sscrfields-ucomm EQ 'ONLI'
    OR sscrfields-ucomm EQ 'PRIN'
    OR sscrfields-ucomm EQ 'SJOB'.
      IF s_fakt[] IS NOT INITIAL AND s_matdok IS NOT INITIAL.
        MESSAGE 'Message1' TYPE 'E'.
      ELSEIF s_fakt[] IS INITIAL and s_matdok[] IS INITIAL.
        MESSAGE 'Message2' TYPE 'E'.
      ENDIF.
    ENDIF.
(You could also always send the message, but using type 'E' for those function code and 'S' status for any other value.)
Regards,
Raymond

Validations at selection-screen

hi ,
how to do validations at selection-screen?
with regards
always learner
points will be rewarded if useful

Hi Buddy
Its good to learn alwasys . Here are some progarms which are useful in selection- screen.
Dont forget to reward points.
at selection-screen.
select LIFNR
       from LFB1
       into table
       where lifnr in s_lifnr.
if sy-subrc ne 0.
message e888(sabapdocu) with 'no number found'.
endif.
in this way u can write the select query.
selection-screen begin of block b1.
parameters: p_datum1 type sy-datum,
p_datum2 type sy-datum.
selection-screen end of block b1.
at selection-screen on block b1.
if p_datum1 is initial
and p_datum2 is initial.
message e001(00) with 'Enter at least one date'.
endif.
PARAMETERS: TEST1(10) MODIF ID SC1,
            TEST2(10) MODIF ID SC2,
            TEST3(10) MODIF ID SC1,
            TEST4(10) MODIF ID SC2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
    SCREEN-INTENSIFIED = '1'.
    MODIFY SCREEN.
    CONTINUE.
ENDIF.
IF SCREEN-GROUP1 = 'SC2'.
    SCREEN-INTENSIFIED = '0'.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS: R1 RADIOBUTTON GROUP RAD1 DEFAULT 'X',
              R2 RADIOBUTTON GROUP RAD1,
              R3 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: R4 RADIOBUTTON GROUP RAD2 DEFAULT 'X',
              R5 RADIOBUTTON GROUP RAD2,
              R6 RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
IF R1 = 'X'.
    MESSAGE W040(HB).
ENDIF.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD2.
IF R4 = 'X'.
    MESSAGE W040(HB).
ENDIF.

Validations on the screen fields in a module pool program

Hi all
i am creating a sales order against a purchase order ,i am selecting a PO click on a button to call another screen which has all the mandatory fields of the SO i want validations on the screen fields or the input fields as when i enter the header data and the items data and the partner data from the input serach help that is already enabled on the screen fields ,if there is any mismatch among the fileds and an error message is displayed for example:-" material no 100-100 does not exist for sales area" then only that field where this message is present should be field enabled and the rest of the fields should be field disabled.
also the error message i m displaying is in short text form and not in long text i clicked on it (long text) however how to use it was not known to me .
thanks
varun
Moderator message: please do more research before asking, try solving problems yourself first, look for previous discussions of similar issues, post texts in more readable format, you have been warned several times before.
Edited by: Thomas Zloch on Feb 7, 2012

i want to have input search help as if i select sales document type then corresponding sales organizations should appear
This would be quite opposite of what h_vakz does. h_vakz gives Sales document based on Sales org..and you want vice versa. Create a simple SH with
selection method : TVAKZ
AUART as importing only
VKORG as exporting only. So when you enter an AUART you get all VKORG it is defined in. I'm not aware of a standard search help which matches the requirement. If anybody does please help me.
i have header data (only mandatory fields),items data,partner data(all mandatory fields)
and when i select all the header data the search help that is on the material number and partners role and number should appear corresponding to that header data
You will have to be more specific sir..
not able to apply please guide someone
As for that just mention them in SCREEN->ELEMENT LIST->REFERENCES

Dell PowerVault MD3600f - Unable to upgrade firmware - Data validation error

Upgrade Controller Firmware wizard reports the following error.
1 problem detected.
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
What does this mean? and how to fix it.

Hi,
yes 100% the error is reported from the dell mdsm software.
steps.
1. open mdsm application
2. right click on powervault md3600f
3. select upgrade raid controller module firmware
4. upgrade raid controller module screen apears and refreshes unit(s) status changes to no upgradeable.
5. error apears in the details window.
6. press view log.
[May 17, 2013 9:25:15 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 1
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 0
[May 17, 2013 9:25:38 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 1
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 0
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [Physical Disks Unavailable]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check configuration database]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check physical disks]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check disk groups and disk pools]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check hot spares]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check current operations]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check virtual disks]
Test passed
[May 17, 2013 9:25:43 AM] [MD3600] [pre-upgrade tests] [check internal data validity]
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
[May 17, 2013 9:25:44 AM] [MD3600] [pre-upgrade tests] [check event log]
The event log was cleared within the last 24 hours (event type: 100).
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [check event log]
Test passed
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 30s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

REUSE_ALV_GRID_DISPLAY standard data validation routine

I am using REUSE_ALV_GRID_DISPLAY to display data from a custom table and allowing users to edit some fields. When the save button is clicked SAP automatically validates some data fields (for example MATNR) and alerts the user if there is an error. This is great!! But I need to execute some custom code when the user clicks the SAVE button. If SAP has detected an error and is going to pop up the Error Log screen for the user, I do not want to execute my custom code.
Does anyone know how to determine if SAP has detected problems with the data so I can skip my code and let the normal process flow continue?
I thought about trying to check if the all field values were valid using my own coding, but when I use the method CHECK_CHANGED_DATA only valid field values are transfered to my internal table. So invalid fields AND fields that the user did not enter values into are all coming back as blank.
Here is a small portion of my code.
FORM user_command USING    r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = ref1.
CALL METHOD ref1->check_changed_data .
CASE r_ucomm.
     WHEN 'SAVE'.
          "Do some custom coding here if SAP did not detect any errors with data validation
ENDCASE.
Thanks for your help,
David

Hi,
In your user_command form
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
        it_fieldcat                 = i_fieldcat[]
        is_layout                   = pt_grplayout2
        i_callback_program          = 'YATTU0007'
        i_callback_html_top_of_page = p_header
        i_callback_user_command     = 'USER_COMMAND'
        it_events                   = i_events[]
      tables
        t_outtab                    = i_yatthdr.
In user_command form
* Form user_command                                                   *
* This form will handle the user command from fm REUSE                 *
form user_command using p_ucomm type sy-ucomm
                     rs_selfield type slis_selfield.
data p_ref1 type ref to cl_gui_alv_grid.
call function 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    importing
      e_grid = p_ref1.
call method p_ref1->check_changed_data.
case p_ucomm.
    when '&DATA_SAVE'.
   " WRITE YOUR CODE FOR SAVE
endcase.
rs_selfield-refresh = c_x.             " Grid refresh
endform.                                 " User_command
a®

What does document date represents in VA05 screen?

Dear gurus,
What does document date represents in VA05 screen?
Thanks Regards

Hi,
It is the date on which the document is created.It is the date on which the sales document becomes valid for sales and distribution processing.
The document date is different for each document. In the quotation, the document date is the date from which the quotation is valid. In the sales order, it is the date from which the agreement becomes binding.
In general it will be the document creation date.
Regards,
Krishna.

The timesheet creation failed, because of problems with the project I server or with data validation

Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.

I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book

Excise Invoice Cancellation on Date validation only

Hi Experts,
i am having critical requirement from Business, which is not available in SAP Standard, So i need help from you guys...
Excise invoice can be cancelled on the same day of system/posting date. but when the system date and posting dates are not matching it should through error..
Example : i created Excise invoice on 17th june,2011 this is posting date of excise invoice, if i try to cancell on 17th june , it should allow.
                    but when i try to cancell the excise invoice on 18th june (system date) , it should not allow to cancell and it say Error !!!
i heard there will be possible through User Exit OR Function Module OR Routins ... Please help me
Thanks and Regards
Madhu

Dear Madhusudhanan,
Following are the list of User Exits available for J1IIN
J_1I7_USEREXIT_EXCISE_BEF_SAVE User exit after the excise header and details are written and they can changed in J1IS , J1IIN and Automatic creation of Excise Invoice.
J_1I7_USEREXIT_EXINV_ADDL_DATA User exit for Excise Invoice Additional Data    in J1IS and J1IG
J_1I7_USEREXIT_J1I5_MATFORM    User exit for J1I5 material form changes
J_1I7_USEREXIT_J1I5_VALIDATE   User exit for subsequent J1I5 data validation
J_1I7_USEREXIT_J1IEX_BEF_SAVE User exit for J1IEX before the data is saved
J_1I7_USEREXIT_J1IEX_CHANGE    User exit for changing data before display
J_1I7_USEREXIT_J1IS_BASE_VALUE User exit to Change base value in J1IS
I strongly believe that the first exit will serve the purpose.
Now if you are cancelling it using J1IH, Check the following thread.
J1IH-User Exit
Thanks & Regards,
Hegal K Charles

Data Validation - a feature that Numbers really needs.

Right now, the newly purchased Numbers app for iPad/iPhone is little more than a crippled document viewer for me because numbers doesn't support 'data validation' (as implemented in excel).
Its not a hard concept and likely utilized in a LOT of spreadsheets on the planet. Not supporting such a critical feature is a problem, as it makes numbers, at least for me, rather pointless as an authoring tool since I cannot change or update data in my worksheet without likely corrupting the document's data integrity.
Hopefully, someone at Apple is working on fixing this.
Given that one cannot use data validation - how do I lock down a spreadsheet so I don't accidentally change cell contents?
The fact that there is no 'undo' button on the iPhone version that I do get on the iPad (same app) makes it worse.. I'm occasionally and unintentionally dragging selections of stuff around the page really hosing up the iPhone spreadsheet.
So I need to just remember what needs to be updated, update the excel spreadsheet when I can, then delete the iWork-iCloud doc, upload the replacement, then refresh the iPhone/iPad version.. very cumbersome and not at all 'cloud-like' or usefull.
Apple developers.. are you paying attention?

Yeah I know that apple likely has the same system as Microsoft in sending general support to a forum such as this. And maybe thae same stupid moron that not paying attention to the forums if their users is a food idea.
That doesn't change the point of the issue nor that apple directs ,e here to ask said question
Written in the iPad split soft keypad that covers up the forum post I'm typing. Joy

Date validation

Hi ,
I have a created an textbox with date picker as (dd-mon-yyyy) .
Now i want to create a validation on it for the format (dd-mon-yyyy) .
I have created a pl/sql code with type "function returning error text".
Begin
If :P4_END_DATE IS NOT NULL THEN
if :P4_END_DATE <> to_date(:P4_END_DATE ,'DD-MON-YYYY') then
return 'END DATE should be in "DD-MON-YYYY" Format';
end if;
END IF;
End;
When i type in like 20-NOV-08 it gives error as 'START DATE should be in "DD-MON-YYYY" Format',
but when i change month like 20-11-2008 , it actually gives error
ORA-01843: not a valid month
Error ERR-1024 Unable to run "function body returning text" validation.

Hello,
You have duplicated this post, see my answer here -
Re: Date validation in "DD-MON-YYYY" Format,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Date validation in " DD-MON-YYYY"

Hi ,
I have created a textbox with date picker as (dd-mon-yyyy) .
Now i want to create a validation on it for the format (dd-mon-yyyy) .
I have created a pl/sql code with type "function returning error text".
Begin
If :P4_END_DATE IS NOT NULL THEN
if :P4_END_DATE != to_date(:P4_END_DATE ,'DD-MON-YYYY') then
return 'END DATE should be in "DD-MON-YYYY" Format';
end if;
END IF;
End;
When i type in like 20-NOV-08 it gives error as 'START DATE should be in "DD-MON-YYYY" Format',
but when i change month like 20-11-2008 , it actually gives error
ORA-01843: not a valid month
Error ERR-1024 Unable to run "function body returning text" validation.
Edited by: Vaibss on Nov 25, 2008 2:09 AM
Edited by: Vaibss on Nov 25, 2008 2:10 AM

Hello,
Duplicate post -
Date validation in "DD-MON-YYYY" Format,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Issue with data Validation while migrating from one application to another

Hi All,
I am having a strange issue Kindly please help me .
I have a data form which have data validation on each cell.The dataform is quite large and contain data for 4 accounts and year (Jan to Dec) combination .The issue is that I when I migrate this data form to other application which is just the replica of the main application. The validation on each cells changes its reference points.
I have 5 more similar data form and I need to migrate then to other application and also on production sever. Is there any way that while exporting and importing them using formutil.cmd or other way that the validation cells reference does not change its reference point.
For ex I have validation on Cell A5,A6..........AA6 after migrating it changes to A1,A1.........AA1.
I am using 11.1.2.1.0 version of Hyperion Planning
Kindly please help.
Thanks in advance
Vikash
Edited by: user11391767 on Nov 30, 2011 10:47 AM

Hi Mehmet,
I tried using the FormDefUtil.cmd .But by using this the reference points of validation changes to first cell when imported.
Thanks
Vikash

How do I add time/date stamp to my screen capture file names?

I'm on mac osx.
I'm trying to add time/date stamp to my screen capture file names. (at the moment it's just 'Picture 1' etc..)
I've tried the following command in terminal but have not had success. please help!!
defaults write com.apple.screencapture name "datestamp" at "timestamp"
killall SystemUIServer

Surely someone else will provide a better solution. Meanwhile, however, you might want to try the following script. Copy and paste the script into the AppleScript Editor's window and save it as an application. Then drop your screen capture files on the droplet's Finder icon.
on open theDroppedFiles
    tell application "Finder"
        repeat with thisFile in theDroppedFiles
            set theFileName to name of thisFile
            if (word 1 of theFileName is "Picture") and ¬
                (word 2 of theFileName = word -2 of theFileName) then
                set theExtension to name extension of thisFile
                set P to offset of theExtension in theFileName
                set theCreationDate to creation date of thisFile
                set dateStamp to short date string of theCreationDate
                set timeStamp to time string of theCreationDate
                set name of thisFile to "Screen Shot " & dateStamp ¬
                    & " at " & timeStamp & "." & theExtension
            end if
        end repeat
    end tell
end open
Message was edited by: Pierre L.

List data validation failed when creating a new list item but does not fail when editing an existing item

Dear SharePoint Experts,
Please help.
Why does my simple formula work in Excel but not-work in SharePoint?
Why does this formula...
=IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
...work in Excel but fail when I try to use it in SharePoint?
The intent of this formula is the following...
If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form.
Can you help?
Thanks.
-- Mark Kamoski

Dear Jason,
I appreciate your efforts.
However, it seems to me that this statement of yours is not correct...
"If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
I believe this is NOT the answer for the following reasons.
When I create a new item and click Save, the validation error is "list data validation failed".
When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
good details.
However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created with OOTB
SP 2013. So, in some cases, there is an extra click for the enduser.
Thanks,
Mark Kamoski
-- Mark Kamoski

Date validation on selm screen

Similar Messages

Maybe you are looking for