Datpump Export,Import across lower and higher versions

Versions involved : 10.2.0.4, 11.2.0.3
Operating System : AIX 6.1
+++++++++++++++++++++++++++++++++Lets say I export a schema in a 11.2 Database using 11.2 expdp .
Can I import the above dump (11.2) to a 10.2 Database using 10.2 impdp ?

Setting VERSION=10.2 worked fine for me.
Since I was curious, I tested taking a table level export dump from 11.2.0.3 Schema using 11.2.0.3 expdp without VERSION parameter. I succesfully managed to import those tables to a 10.2.0.2 schema needless to say using 10.2.0.2 impdp.
I don't know how this worked . Maybe export,importing from higher to lower version at schema level might fail. Need to test it when I have time.
This is contrary to Oracle documentation (11.2 DB Utilities guide)
Data Pump Import cannot read dump file sets created by a database release that is
newer than the current database release, unless those dump file sets were created
with the VERSION parameter set to the release of the target database. Therefore,
the best way to perform a downgrade is to perform your Data Pump export with
the VERSION parameter set to the release of the target database
But, anyway I am glad that Oracle's superior coding has enabled me to export,import from higher to lower version.

Similar Messages

Rman backup from lower and higher versions

Hi all,
we have three database one db in 8.1.0.6.0 and another 9.2.0.8.0 and another 10.2 database. Can i backup using 9i rman to lower version 8i and 10G using same catalog created in 9i ?

Please check about compatible
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/compat002.htm

Install and uninstall of dmg file using Apple script in Mac 10.6 and higher version.

Hi ,
Could anyone please help me to write a Apple script to Install dmg file and do clean uninstall in Mac 10.6.8 and higher version.
My requirement is:
When i run script : it has to install the dmg file which is located inside one desktop folder say 'New Folder'
I need to do clean unistall when i run the script: i need to delete the folder in ~/Library- locate folder say 'CPSPCSHOWSERVER'' move to trash and from Terminal type in command "rm -r ~/.CPS' to completely delte this folder.
Really appreciated all ur help!!
Thanks,
KT.

http://macfidelity.de/2008/08/30/how-to-mount-a-dmg-from-terminal-in-mac-os-x/in dex.html
http://osxdaily.com/2011/12/17/mount-a-dmg-from-the-command-line-in-mac-os-x/
http://hints.macworld.com/article.php?story=20030614230204397
http://www.commandlinefu.com/commands/view/2031/install-an-mpkg-from-the-command -line-on-osx

Table AGR_1251: Search between a range of the field "LOW" and "HIGH

Hello Experts,
i've got a problem by searching all users who have the authority for a transaction.
The transaction was written in a parameter, called p_trans.
I've the Tables AGR_1251, AGR_AGRS and AGR_USERS.
I know what I've to do.
Here is my Join.
SELECT agru~uname
INTO CORRESPONDING FIELDS OF TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
    ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
    ON agrs~agr_name = agru~agr_name
INNER JOIN usr01 as us
    ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
               ag12~field = 'TCD' AND
               ???? parameter p_trans between ag~low and ag~high????
SELECT agru~uname
APPENDING TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
    ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
    ON agrs~child_agr = agru~agr_name
INNER JOIN usr01 as us
    ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
               ag12~field = 'TCD' AND
               ???? parameter p_trans between ag~low and ag~high????
SORT gt_users BY uname ASCENDING.
DELETE ADJACENT DUPLICATES FROM gt_users COMPARING uname.
Here is my question:
In my code are question marks...here i want to say, that my transaction lays between the fields LOW and HIGH.
But how can i say, that in WHERE.
I have to say... Search that agr_name, where object = s_tcode, field=tcd and where my transaction lies between.
For example: low is T and high is X and i have the transaction va21.
So i must find out, in which range lays ma transaction.
I hope somebody understands me
Thanks!
Regards,
Marcel

Hi Marcel,
You are mentioning it as a parameter between having low & high values. Is it a parameter or select option.
If its a parameter, then anyway it will have only single value at any point of time.
If its a select option, then you need to use
select * from
and tcode in s_tcode.
Thanks,
Best regards,
Prashant

How to Implement KFF Range (Low and High) in query find form in oracle apps

Hi,
Please provide some sample script for using KFF range LOV (Low and High) in one of the query find form in Oracle apps R12.
I need to customize one of the standard form and add this range functionality for that search form.
Thanks,
Prasanna

Yuvaraaj,
Your request is unique to the Oracle Enterprise Business Suite (EBS). Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig...

Low and High sliders in Audi

Hellow!
I use Audigy2 Value for a long time but never had this question in my mind. Now i have to make music arrangement of several songs and mix a lot of tracks in Sonar, so i extremly need to hear "true" frequencies of my tracks in monitors while mixing. And the question is - what the right position of Low and High sliders in the Audigy 2 Mixer to archi've "orriginal" sound, without any frequency disbalance? (i usually move then from 50% to 00% and, of course, it's not the right way). Heeeelp, pleeeease!

For all the equaliser sliders, the middle position of the slider is the neutral one. Above that, the freqv is accentuated, under that, the freqv is attenuated.
The Creative marking in % is a unfortunate one, but 50% is the position that would be neutral.

In VB how do I pass my low and high limit results from a TestStand Step into the ResultList and how do I retrieve them from the same?

I am retrieving high and low limits from step results in VB code that looks something like this:
' (This occurs while processing a UIMsg_Trace event)
Set step = context.Sequence.GetStep(previousStepIndex, context.StepGroup)
'(etc.)
' Get step limits for results
Set oStepProperty = step.AsPropertyObject
If oStepProperty.Exists("limits", 0&) Then
dblLimitHigh = step.limits.high
dblLimitLow = step.limits.low
'(etc.)
So far, so good. I can see these results in
VB debug mode.
Immediately after this is where I try to put the limits into the results list:
'Add Limits to results
call mCurrentExecution.AddExtraResult("Step.Limits.High", "UpperLimit")
call mCurrentExecution.AddExtraResult("Step.Limits.Low", "LowerLimit")
(No apparent errors here while executing)
But in another section of code when I try to extract the limits, I get some of the results, but I do not get any limits results.
That section of code occurs while processing a UIMsg_EndExecution event and looks something like this:
(misc declarations)
'Get the size of the ResultList array
Call oResultList.GetDimensions("", 0, sDummy, sDummy, iElements, eType)
'Step through the ResultList array
For iItem = 0 To iElements - 1
Dim oResult As PropertyObject
Set oResult = oResultList.GetPropertyObject("[" & CStr(iItem) & "]", 0)
sMsg = "StepName = " & oResult.GetValString("TS.StepName", 0) & _
", Status = " & oResult.GetValString("Status", 0)
If oResult.Exists("limits", 0&) Then
Debug.Print "HighLimit: " & CStr(oResult.GetValNumber("Step.Limits.High", 0))
Debug.Print "LowLimit: " & CStr(oResult.GetValNumber("Step.Limits.Low", 0))
End If
'(handle the results)
Next iItem
I can get the step name, I can get the status, but I can't get the limits. The "if" statement above which checks for "limits" never becomes true, because, apparently the limit results never made it to the results array.
So, my question again is how can I pass the low and high limit results to the results list, and how can I retrieve the same from the results list?
Thanks,
Griff

Griff,
Hmmmm...
I use this feature all the time and it works for me. The only real
difference between the code you posted and what I do is that I don't
retrieve a property object for each TestStand object, instead I pass the
entire sequence context (of the process model) then retrieve a property
object for the entire sequence context and use the full TestStand object
path to reference sub-properties. For example, to access a step's
ResultList property called "foo" I would use the path:
"Locals.ResultList[0].TS.SequenceCall.ResultList[].Foo"
My guess is the problem has something to do with the object from which
you're retrieving the property object and/or the path used to obtain
sub-properties from the object. You should be able to break-point in the
TestStand sequence editor immediately after the test step in question
executes, then see the extra results in the step's ResultList using the
context viewer.
For example, see the attached sequence file. The first step adds the extra
result "Step.Limits" as "Limits", the second step is a Numeric Limit (which
will have the step property of "Limits") test and the third step pops up a
dialog if the Limits property is found in the Numeric Limit test's
ResultList. In the Sequence Editor, try executing with the first step
enalbled then again with the first step skipped and breakpoint on the third
step. Use the context viewer to observe where the Limits property is added.
That might help you narrow in on how to specify the property path to
retrieve the value.
If in your code, you see the extra results in the context viewer, then the
problem lies in how you're trying to retrieve the property. If the extra
results aren't there, then something is wrong in how you're specifying them,
most likely a problem with the AddExtraResult call itself.
One other thing to check... its hard to tell from the code you posted... but
make sure you're calling AddExtraResult on the correct execution object and
that you're calling AddExtraResult ~before~ executing the step you want the
result to show up for. Another programmer here made the mistake of assuming
he could call AddExtraResult ~after~ the step executed and TestStand would
"back fill" previously executed steps. Thats not the case. Also, another
mistake he made was expecting the extra results to appear for steps that did
not contain the original step properties. For example, a string comparison
step doesn't have a "Step.Limits.High" property, so if this property is
called out explicitly in AddExtraResult, then the extra result won't appear
in the string comparison's ResultList entry. Thats why you should simply
specify "Step.Limits" to AddExtraResul so the Limits container (whose
contents vary depending on the step type) will get copied to the ResultList
regardless of the step type.
I call AddExtraResult at the beginning of my process model, not in a UI
message handler, so there may be some gotcha from calling it that way. If
all else fails, try adding the AddExtraResult near the beginning of your
process model and see if the extra results appear in each step's ResultList.
Good luck,
Bob Rafuse
Etec Inc.
[Attachment DebugExtraResults.seq, see below]
Attachments:
DebugExtraResults.seq ‏20 KB

Select-options split date into month and assign to low and high

Hi,
   In my select-options i am giving BEDAT (01.04.2004 TO 30.10.2005).I need to split month and
year in separate fields.that is
select-option_low-month in one field
select-option_high-month in second field
select-option_low-year in third field
select-option_high-year in fourth field.
Finally i need to move these four fields to it_final.
select * from mbewh into corresponding fields of table it_mbewh
           for all entries in it_final where matnr = it_final-matnr and
           bwkey = it_final-werks and lpmon = ? and lfgja = ?
           and bklas <> ' '.
what input i have to give in lpmon and lfgja in select query to get for lfmon (04 to 10)
and lfgja (2004 to 2005).
suggest some ideas.

Hi ,
Can you please check the following code.
Hi ,
data : l_low_yr(4),
          l_high_yr(4),
          l_low_mon(2),
          l_high_mon(2).
Splitting the select option date to month and year into low and higher values
l_low_yr        =   s_date-low+00(04). " Year low value from the date range
l_low_mon    =   s_date-low+04(02). " Month low value from the date range
l_high_yr      =   s_date-high+00(04)." Year high value from the date range
l_high_mon   =   s_date-high+04(02)." Month high value from the date range
selecting the data from the table mbewh based on some conditions.
select * from mbewh into corresponding fields of table it_mbewh
           for all entries in it_final where matnr = it_final-matnr and
           bwkey = it_final-werks and lfmon BETWEEN l_low_mon and l_high_mon
and lfgja BETWEEN l_low_yr and l_high_yr   and bklas EQ ' '.
This select will retrive the desired data records from the table MBEWH.
Please let me know if this works according to your requirement.
Thanks and Regards
Saritha

Importing dump taken from higher version to lower version

Hi all,
I have already taken dump from oracle 9.0.2 database without using exp utility of lower verion and alo without running catexp.sql script prior to export.
Now i need to import this dump into 9.0.1 database.It gives error due to backward-incompability.
Is there any way to import without re-exporting whole database again using exp utility of lower version against higher version.

It is an unsupported scenario. I had to face it once with the same 920->901 versions. What I did was also absolutely unsupported at my own risk and it was a last chance action. I'll tell you what I did and how it worked for me, which doesn't mean it will work for any situation. If you open your file with a binary file editor you will see at the first file blocks a header that displays the export version "EXPORT:V09.02.00" This header is read by the import to check which version was used to generate the file and prevent an unsupported downgrade, I changed it to EXPORT:V09.00.01 and retried the import. A lot of error messages appeared, but it successfully loaded my information. I took the risk because I made sure this specific database contained just basic tables, indexes and version compatible objects and definitions, it was a testing environment, I didn't have the right Oracle version and there was no time to get it, and finally I had a bullet proof backup.

How to export/import new SCV and products?

Hi,
I have created a new product, product version, software component and software component version in the SLD.
Now I need to import that to another XI system with a different SLD. The product, product version etc. is unknown in the target XI system.
How/What do I have to export all these new things?
If I try to export/import the SCV, I get the following message during import:
"<b>The target namespace for the special import already contains data for one or more export lines. Continuing this import may corrupt the state of your data.</b>
Import CIM models and data to the current namespace: sld/active (Database).
Ensure that this import will not cause an inconsistent state of your data.
If you are uncertain about the consequences of this import, you should cancel it. "
Do I need more export/import steps? That means: First the product, than the product version, than the SV and finally the SVC?
Thanks and regards,
Christian

Hi Christian,
if you want to move SLD content
have a look at this doc:
https://websmp110.sap-ag.de/~sapidb/011000358700000315022005E.PDF
it's an officla guide to moving SLD content
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to export/Import default prefs and object styles with no project open?

I would like to export my preferences and object styles with no projects open and them import them on my team's machines so that no matter what project we create, we all start from the SAME set of defaults. When I open captivate and check both with no projects open, there is no ability to import/export. I know I could open a project and export, but then importing is an issue.
I'm using CP8 on a Windows 8.1 64 bit machine.
Help?
Thx.
Lori

After a fresh install I start by editing the Preferences globally, that means by using Edit, Preferences before opening any project (like switching to Expert UI, default language, replacing feedback captions by shapes). There is indeed no way to import preferences from a specific file. I will do the same for some object styles (like creating a blank Highlight box for audio objects). You can only export/import from and to a project, same like for all Library assets.
However the Object styles: they are part of the default theme, along with their theme colors, master slides and skin. You cannot edit everything without having a project open. I would recommend to create a custom theme in a project, in which you have all the wanted object styles. Changing the theme colors (you can have a custom theme color palette) will change partially colors of the objects. Once you set that theme as default theme, you'll have all the object styles in the projects that use the default theme.
To transfer Preferences, custom themes to another machine, maybe this article could help you out. It was written for a different purpose, but you'll find the location of a lot of files that you could transfer in this post:
Captivate 8.0.1 Install? Keep your Customisation! - Captivate blog
Lilybiri

Parameter Export/Import is getting too high

Hi Experts,
In our production system the parameter Export/Import is too high currently shown as 95.31 while there is no swaps occured.Please guide us how can I manage this .
We are using ECC 5.0 + oracle 9i with patch level 7
Thanks in advance.

Hi,
The hit ratio is above 95% which means it is good. You should not worry about that.
Rgds,
Suman

Export/import login server and user grup security

Hi,
I followed the instructions to export Login server, user group
security using the ssoexp.csh, secexp.csh. Then I imported the
login server, and user group security using the ssoimp.csh,
secimp.csh .
I then logged into Portal and check the users, all the users are
imported properly. However, I didn't see any group that are
supposed to be imported. Do I missing anything?
The syntax to run the secimp is as follows:
secimp.csh -s portal30 -p portal30 -o portal30 -m reuse -d
sec.dmp -c target_database
The import finished w/o error. How can I see the groups in the
new portal instance that I tried to import objects in?
I noticed that the wwsec_group$ in the source area is over 3000,
and in the target the count is only 10, which is the number of
group I have before the import. But during the export, I don't
see the wwsec_group$ table being exported, is that the problem?
P.S. versions are: 9iAS 1.0.2, portal version 3.0.9.8 on solaris.
Thanks;
Kelly.

This question is best suited to the Oracle9iAS SSO and Portal Security forum.
Thanks

Export - import between ASO and BSO cubes of different structure

Hi everybody!
I have a 'large' ASO cube with information for a period of several years.
I need to be able to load a smaller slice (e.g. one quarter) from the 'large' cube into a BSO cube with a different (simpler) structure , perform calculations and then load the updated data back to the 'large' ASO cube.
What's the best way to approach this (import - export)?
Thanks in advance,
Alex

Hi GlennS,
Hello and thank you again for the help.
I'm running version 9.3.1
The ASO cube has 12 dimensions plus 8 attribute dimensions.
The BSO cube - 8 dimensions plus 2 attribute dimensions.
Data size:
The ASO cube is about 1 GB, about 16 M input level cells. Only about 10 % of it will be extracted and loaded into the BSO cube.
The BSO cube is ~ 300 MB fully calculated. 300,000 existing blocks
I prefer not to load the BSO cube from the same source as because ASO cube contains not only the source data, but also modifications - for example - allocations etc. I would like to keep these modifications and to be able to load (modified) data to BSO, make additional modifications and then 'save' the modified data back to the ASO.
How should I approach loading data back to the ASO? I will need to 'replace' a slice of ASO cube - delete the 'old version' cells and load new version from the BSO cube.
Thanks,
Alex

Export & import between 32bit and 64bit windows

I need to move a schema over from a 32-bit windows machine to a 64-bit windows machine.
both machines are network mapped,
so
I exp it out from 32 machine
copy and paste from 32 to 64 machines
then imp into 64 machine
and get this error
IMP-00010: not a valid export file, header failed verification
IMP-00000: Import terminated unsuccessfully
machine oracle utilities are:
Export: Release 10.2.0.1.0
Import: Release 10.2.0.1.0
help please.

Are you using original exp/imp or data pump?
exp/imp should be able to handle 32bit to 64bit transport.
It's either your dump file got corrupted during transfer.
Or your database server is not same version as your utilities. Please verify and post your Oracle server version.

Datpump Export,Import across lower and higher versions

Similar Messages

Maybe you are looking for