Parameter Export/Import is getting too high

Hi Experts,
                  In our production system the parameter Export/Import is too high currently shown as  95.31 while there is no  swaps occured.Please guide us how can I manage this .
We are using ECC 5.0 + oracle 9i with patch level  7
Thanks in advance.

Hi,
The hit ratio is above 95% which means it is good. You should not worry about that.
Rgds,
Suman

Similar Messages

  • Datpump Export,Import across lower and higher versions

    Versions involved : 10.2.0.4, 11.2.0.3
    Operating System  : AIX 6.1
    +++++++++++++++++++++++++++++++++Lets say I export a schema in a 11.2 Database using 11.2 expdp .
    Can I import the above dump (11.2) to a 10.2 Database using 10.2 impdp ?

    Setting VERSION=10.2 worked fine for me.
    Since I was curious, I tested taking a table level export dump from 11.2.0.3 Schema using 11.2.0.3 expdp without VERSION parameter. I succesfully managed to import those tables to a 10.2.0.2 schema needless to say using 10.2.0.2 impdp.
    I don't know how this worked . Maybe export,importing from higher to lower version at schema level might fail. Need to test it when I have time.
    This is contrary to Oracle documentation (11.2 DB Utilities guide)
    Data Pump Import cannot read dump file sets created by a database release that is
    newer than the current database release, unless those dump file sets were created
    with the VERSION parameter set to the release of the target database. Therefore,
    the best way to perform a downgrade is to perform your Data Pump export with
    the VERSION parameter set to the release of the target database
    But, anyway I am glad that Oracle's superior coding has enabled me to export,import from higher to lower version.

  • Isn't there supposed to be something to shut your Mac down when the temperature gets too high like there is in Windows bios?

    A program hung up and the temperature reached 192° F before I shut the Mac laptop off.
    Why did this SMC Fan Control program  or my Mac let the temperature get that high?  If it wasn’t for SMC I would never known the temperature got that high.
    Isn’t there supposed to be something that shuts  The Mac down around 160° F ?
    What  I need it to do so that my Mac does not become a doorstop, is to have it force quit all programs at 160°F.
    I could create a macro and do it myself if I can import the temperature to the clipboard and write a script that says if temperature equals 160°F force quit and then list all the programs I wanted it to force quit. 
    This could be easily done with Keyboard Mastro  By getting the temperature from SMC fan control.
    It would be nice to be able to choose which programs you wanted to force quit. Dragon Dictate locks up and raises the temperature, When the temperature gets 160 I would like Program to be forced to quit.
    I don’t want to force quit pages or text editor that I might be working on that I might lose information. But to force quit all other programs like Safari, mail or iTunes, is not going to cause me to lose information as the information will still be on the mail servers and on the web.
    Can someone please write a program for me? 
    I hope Apple is listening  may be they can make that an option in their next version it should be simple to do.
    I don’t mean to copy Windows Ideas, but This would be better than Windows, to actually  force quit the programs causing the high temperature rather than shutting the whole machine off causing you to lose information.

    It can burn your lap also Some people have gotten burns.
    MBP is a Notebook.  It is not a laptop & should not be used as such.
    User Tip:  How to deal with MacBook Pro and MacBook heat
    According to the user manual it states in part:
    "Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
    MacBook Pro: Care, Use, and Safety Information
    "Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."

  • When I attempt to export/import via FTP for OOTP 11 I get a connectivity error message

    I participate in OOTP ver 11 fantasy baseball leagues which uses FTP to export and import league databases. For some reason, I have been unable to import/export using FTP. Each time I attempt to export/import I get a connectivity error message stating "am unable to connect". I have not had this problem with the previous versions of OOTP Fantasy Baseball. Plus, when I first upgraded to OOTP 11, I did not have this problem.
    == This happened ==
    Every time Firefox opened
    == I think it started after a firefox update ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; MS-RTC LM 8; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Export/Import Project problems

    I have two machines: a PowerMac (G5) and a MacBook Pro (Intel Dual Core). Both 2GB RAM, running OS X v10.5.6 and Aperture 2.1.2. (More tech spec info available if anyone thinks it relevant).
    I have built up a project on the MacBook Pro, creating albums, creating stacks and making picks within the stacks, making adjustments to each of the picks and then creating a book.
    I now want the project on the PowerMac G5, which is my master machine and contains all my other projects.
    On the MacBook Pro I exported the project and then copied the resulting .approject file to the PowerMac. I then imported the project into Aperture from there. On a cursory scan, everything seems fine and in the Projects Inspector it shows 1376 images against the project on both machines. However, if I look more closely, I've lost all my picks. I.e. I need to go through every stack again and reselect my picks (very boring).
    It gets worse when I look at the Book within the project - it's lost the positionings (i.e. I double clicked on the image and moved it around slightly to get the best crop for the selected box shape). And then I did a Close All Stacks and it deleted every picture from the book so all 60 pages were empty again and the images were all back down in the film strip!
    At this point, my immediate thought was the .approject file got corrupted during the copy, but I've done a recursive diff (diff -qr fileA fileB) between the file on the MacBook Pro and the file on the PowerMac and it reported no differences at all.
    Has anybody else had similar problems? Is the project import/export known to be flakey? Better yet, anybody know of any workarounds?
    Thanks in advance for any help anyone can offer.
    Darren

    OK - I've tried eliminating some of the variables and it turns out the two-machines-issue is a bit of a red herring and this is a straightforward Export/Import bug in Aperture.
    On a single machine (2.16GHz Intel Core Duo MacBook Pro with 2GB RAM, running OS X 10.5.6 and Aperture 2.1.2 (build 3G13)) I have a project with many images. I create versions of these images and apply adjustments (Sharpness, Monochrome Mixer, Exposure, Enhance, etc.). I then make the adjusted version the Pick and I've created a 62 page book from these Picks.
    Now I export the project (i.e. in the Project Inspector I right-click the project and choose Export > Project). I export the project to a file on the desktop and rename the existing project in Aperture. I now import the saved .approject file and I find that all my (long and carefully chosen) Picks are no longer Picks. (I've tried this a few times and ruled out the possibility of a corrupt export file).
    As a result, when I select the Book I get the "Non-Pick Images" dialog with the dreaded "One or more placed items are no longer the pick of a stack." message.
    I have two options at this point: "Use Current Pick" ruins the book - I have to go through and work out all the picks again (and also re-pan all the images within the Photo Boxes as this data has also been lost).
    Or I can choose "Create new Version", which appears to preserve my book's original look (I haven't looked in too much detail yet), but my project now contains a couple of hundred more images than it used to (or at least extra versions which, whilst I know these are relatively 'cheap', are still unnecessary) and this still doesn't help with my other albums and light tables, which still have incorrect images shown as the Picks.
    I'm finding this quite a worry - I originally hesitated to move my photo library into Aperture due to the thought of losing the metadata one day if I moved from Aperture to something else, but in the end I decided to trust that something as simple-to-test as Export/Import would get properly implemented - now I'm beginning to fear that it doesn't even within the same version of Aperture, never mind different versions of Aperture or (heaven forbid) different applications altogether

  • Issues with Export/Import using Database & Shared buffer

    Hi All,
    I have a method that calls a program via a job and I am having issues passing data between the two.
    Note that two different users process the method and program (via job) resp. This is how I am calling the second prog-
    SUBMIT ZPROGRAM
                 VIA JOB     l_jobname
                     NUMBER  l_jobcount
                     USER    i_user
                 AND RETURN.
    I need to pass data from method to  the second program and vice versa and then the method continues its processing with the data acquired from the second program.
    I have tried using Import/Export using database and also shared buffer. What I have found is that most of the times I am able to pass data from method to program. However the job takes a couple of min to execute and I think that the data is not making back to the method in time.
    I have looked at some useful forum links-
    Problem with export/import in back ground
    Re: EXPORT/IMPORT  to MEMORY
    but havent been able to find an answer yet. Any solution? Thanks in advance for your help!
    Liz

    Hi Suhas, Subhankar
    I have tested the scenario without the job previously itself and it works. Thats the reason, i am trying with the job now as my requirement is that I need to change the user while executing the second report.
    Here is an example of my import/export - I am passing the return value from the second report to the first.
    Code in second report-
    DATA: INDXKEY LIKE INDX-SRTFD VALUE 'RET1'.
    INDX-AEDAT = SY-DATUM.
    INDX-USERA = SY-UNAME.
    EXPORT RETURN1 TO SHARED BUFFER INDX(ST) ID INDXKEY.
    Code in first report -
    SUBMIT ZPROGRAM
                     VIA JOB     l_jobname
                         NUMBER  l_jobcount
                         USER    i_user
                     AND RETURN.
    Once Job close FM is executed successfully, I import the values as follows
    IMPORT RETURN1 TO RETURN1 FROM SHARED BUFFER INDX(ST) ID INDXKEY3.
    INDXKEY is having value RET1.
    However Return1 is not having any values in first report. It has some value in executed without the job
    Please note that I have tried Export/import with Database too and I am getting the same results.
    Thanks for your suggestions.
    Regards, Liz

  • Using set/get parameters or export/import in BSP.

    Hi All,
    Is it possible to use set/get or export/import in BSP?
    We need to set/export some variables from a BADI and get/ import them in the BSP application.
    Code snippet will be of great help..
    Thanks,
    Anubhav

    Hi Anubhav,
    You can use the Export / Import statements for your requirement,
    from the BADI use EXPORT to send the variable data to a unique memory location
    with IDs
    e.g.
    *data declaration required for background processing
          DATA: WA_INDX TYPE INDX.
    **here CNAME is the variable you want to export
    EXPORT PNAME = CNAME TO DATABASE INDX(XY) FROM WA_INDX CLIENT
                SY-MANDT ID 'ZVAR1'.
    and in the BSP application use the IMPORT statement to fetch back the values
    set with the IDs above.
    IMPORT PNAME = LV_CNAME
      FROM DATABASE INDX(XY) TO WA_INDX CLIENT
      SY-MANDT ID 'ZVAR1'.
    deletes the data to save wastage of memory
      DELETE FROM DATABASE INDX(XY)
        CLIENT SY-MANDT
        ID 'ZVAR1'.
    Regards,
    Samson Rodrigues

  • (ABAP+JAVA) system is too big to export/import

    We have some NW04s and ECC6 dual stack systems that we want to frequently clone using homogeneous system copy method.
    However they can be as big as many terabytes.
    Is there a way to clone they using a way other than export/import?
    Thanks!

    Hi,
    As of SAP NetWeaver 7.0, you can copy ABAPJava systems in one run using either database-specific methods or database-independent methods. In a ABAPJAVA stack system, you need to run a separate export for the Java engine to archive SDM and application specific file contents. You will have to supply that java Export location on the target system, while performing DB specific system copy procedure.
    Please refer [system copy guide for ABAP+JAVA stack |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000670917&_SCENARIO=01100035870000000112&_OBJECT=011000358700000416402008E] along with the previously suggested links to get more information.
    Regards
    Bhavik G. Shroff

  • Export/import buffer swap high

    hi friends;
    I  am with ERP Ecc6 system.in oracle 10g & aix5.3
    I am facing an issue with
    Export/import buffer shows a HitRatio 83% and swaps is 1,195,697. can anybody please suggest me how to solve the performance issue
    regards
    seethy

    Hi Seethy,
    Please check the following OSS Notes:
    373986      Overflow of the export/import buffer
    702728      Profile parameter for export/import buffer instances
    625305      Profile parameters for the error analysis buffer
    Regards,
    Siddhesh

  • How to define Export parameter as Import parameter in next test script.

    Hi Experts,
    We have defined Purchase order no. as export parameter in ME21N transaction test script.
    Test configuration for ME21N transaction executed succesfully and the Purchase order No. appeared in the last message
    is the export parameter for next test script i.e. MIGO transaction.
    However I am unable to define this export parameter as Import parameter in next test script for MIGO transaction.
    Please suggest me the method to define the same.
    Please Help...
    Thanks in Advance
    Vikas

    Vikas,
    You need to create super script which is nothing but having the both the steps (Po creation & MIGO ) in this eCatt script. This can be achieved by using the REF command as ex. below.
    Create PO
    REF ( Z_CREATE_PO , Z_CREATE_PO_1 ).
    Create MIGO
    REF ( Z_CREATE_MIGO , Z_CREATE_MIGO_1 ).
    Z_Create_PO is the actual eCatt script that you recorded to create the PO. Z_CREATE_QUOTE_1 is the interface created by SAP. Similarly you have use the REF command to call the MIGO script inside this super script.
    To pass the export parameter from PO step to MIGO, double click the Z_CREATE_PO_1and define the export variable for PO number. And do the same on the interface for MIGO step.
    Follow the instructions if you need in this help document posted by another user in this forum
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0134775250DB00634934533836311611End?blog=/pub/wlg/3497
    Note : Cut & paste the entire link above to view the document.
    thanks
    Venkat

  • When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000

    When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000
    The video is encoded with sonic cinevison as avchd file and one AC3 file.

    What can I do to avoid it?
    Well, about the only thing you can do to solve "bitrate too high" errors is to lower the bitrate.

  • Share to DVD - bitrate too high (Come on, Apple, get your stuff together)

    I'm quite frusterated with Apple's decision to nix the burner on Macbook Pro laptops (as i'm sure many of us are), and I am also frusterated that they do not include something like iDVD to burn any more; but those issues are beside the point.
    My problem is that I recieve an error telling me that my bitrate is too high when I attempt to "share" to a DVD. I do not have Compressor, and I should not have to spend an aditional $50 simply to execute a function that FCPX should do flawlessly in the first place.
    I've used the free 'Burn' app, but it compresses the file to the point that it looks very unprofessional. I would like to maintain the HD quality. It's a 30 minute video, and that shouldn't be an issue.
    Video Format-
    Duration: 28:47
    1920x1080
    29.97p
    Media is Optimized
    Specs-
    MacBookPro 10,1
    Intel Core i7 2.7GHz
    16GB RAM
    NVIDIA GeForce GT 650M
    OSX 10.9.2
    FCPX 10.1.1

    @BenB - I am unable to burn to HD or to my external drive. The specs of the drive are in the screenshot, but it is a ASUS-SBW-06DX2-U. I am certain that it is powered properly, and I am certain the drive functions properly.
    @Russ H - I understand that I cannot maintain 1080, but what i'm getting with the 'Burn' software is far below acceptable. However, that's beside the point, as I do believe FCPX should burn properly with the workflow I'm using.
    @Alchroma- The step-by-step is fairly simple, as I think Apple intended for it to be. I click on "Share", and then "DVD". You can see the rest in the screenshots. I select the settings I am offered, and click "Share" only to receive the error in the second screenshot
    Thank you all for your responses. I am fairly confident that I am encountering some sort of glitch, but if this error is caused by my doing then I surely appreciate any and all advice. I'm just confused that I'm recieving a bitrate error without even being given the opportunity to select a bitrate... am I missing something?

  • Why do I get data rate too high error after capture and save? (using AJA Kona)

    I record(capture) about an 70 min program with Adobe premiere CS5 once a week. About a year ago I got the error *data rate too high" when stopping "capture" when saving program to Video HD(2TB). The video recorded was OK but after about 15 min the audio was out of sync and garbled. I thought I had found the problem by defragging the video drive. I have not had any problems for about 50 weeks.. until this week-it happened again. I know the video drive(2TB) was defragged and only half full. I was able to recover the program since I back up the program on a DVD but had to go through a lot of problems massaging it since I send the program to a local ABC broadcast station in 16/9 SD and the DVD is rescored in 4/3 .
    I have the CS5 program on a separate 2.5 GB drive. I am running Win7pro and have a RAID series of Intel Xeon ES410 processors.
    Any help as to why I get this "Data Rate too High" when saving program would be appreciated.
    Thanks much!

    I have three Mitsubishi broadcast quality cameras (two HD -waiting on money for switcher and 3rd HDcamera). They feed to their camera control untints and then to a switcher and then into video computer and the C5S. I probably am not answering your question. I can access the computers from my home(I also have a CG computer). Is there some way I can tell you from the C5S program which the info you need? I have it ready to record for next week.
    I know how to manipulate various functions but I do not know all the ins and outs of the Premiere settings-an IT man set those up for me two years and he is no longer available.
    Thanks

  • I have taken a photo from an airplane and cannot get the 'map' function on the exifwizard app. Is it because I was too high? Altitude that is.

    I have taken a photo from an airplane and cannot get the 'map' function on the exifwizard app. Is it because I was too high? Altitude that is. Other photos allow me to use the 'map' function.

    Most likely, if you were inside the airplane, rather than sat on the wing, the iPhone couldn't get a GPS lock-on, or you didn't wait long enough for it to get a lock on.
    EDIT: Lawrence is right... forgot about that.

  • Exporting JPG -- How to setup/get a higher DPI image

    Hello-
    I would really appreciate if any of you experts could help me on this matter. I am saving an InDesign file as JPG, however, the output generated is always 72 DPI even if I have indicated to get a Higher Quality.
    The actual JavaScript function I am using is this:
    function ExportAsJPG(inSaveDocumentPath)
    app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.maximum;
    currentDocument.exportFile(ExportFormat.jpg, File(inSaveDocumentPath), app.pdfExportPresets.item("[High Quality Print]"));
    Any ideas or tips welcome!!!
    Regards,
    G.O.

    Hi Gustavo,
    The "jpegQuality" Property only refers to the compression of the JPEG.
    To change the resolution use something like:
    app.jpegExportPreferences.resolution = 300; // 300 dpi
    Kind Regards,
    mfi

Maybe you are looking for