Days total of songs wrong

I have an odd question. I have a certain number of song in Itunes. The days total was 181 days. I have a lot of songs. In the process of copying the songs from one external drive to another external drive I messed up the process. When I finally got it straightened out I had the same number of songs but the days total had gone down to 84 days. There were no songs missing but obviously a huge difference in days. In the process of importing songs into Itunes does it inflate the days total somehow? Hope somebody can enlighten me because it's a strange situation. Thanks

This is a difficult question for anyone on the internet to answer for you.
All I can think of is start comparing the list from itunes #1 to the list of itunes #2 and see what the differences seem to be.
That is a VERY big difference in the amount of play time, so I'd think you'd be able to see whether files were missing or not.
+In the process of copying the songs from one external drive to another external drive I messed up the process. When I finally got it straightened out I had the same number of songs but the days total had gone down to 84 days.+
For all I know, there were duplicates on the exHDs and when you got that straightened out, the song count/time went down to what it should have been in the first place.

Similar Messages

  • How do I see the total # of songs in my library in the lastest version of Itunes

    How do I see the total # of songs in my library in the lastest version of Itunes.

    click the view bar and then click view status bar.

  • I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    Have you went to Settings>General Time&Date and correct the time.  Make sure the time zone is correct too.  Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

  • Since syncing my Ipod classic three days ago, the songs will only play the first three minutes and five seconds. Then it just stops. After a little while, it moves on to the next song.

    I have an old iPod Classic, 5th generation with video 30 GB. I sync via a pc. Since syncing it three days ago, the songs will only play the first three minutes and five seconds. Then it moves on to the next song or if it's the last song, it goes back to the menu. I just synced again and it it still doing it.It also has a small group of dots near the middle of the screen that weren't there before.Has anyone else had this problem or know how to fix it?  Thanks.

    Please disregard this question. I have a better worded version coming up.

  • Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a iTunes account and recently 2 of the song I have downloaded will not play, it says that it not authorised to play. How ever on the same day the other songs I downloaded that day are playing fine

    I have a iTunes account and recently 2 of the song I have downloaded will not play, it says that it not authorised to play. How ever on the same day the other songs I downloaded that day are playing fine. I can't play the 2 song on my lap top and I-pod.

    Hello Jigz19,
    It sounds like you are unable to play a couple of songs from your library becuase you get a message that the computer is unauthorized to play, but other content purchased that same day works without issue. I would verify that the affected songs were purchased with the same Apple ID first:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    If so, then delete the songs:
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Then re download them with this article:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Total value is wrong in main node (hierarchy)

    Dear experts,
    In the reports the value displayed for the total is wrong in the hierarchy, it is not the sum of the child nodes values:
    ex:
    If Germany has 2 company codes DE01 and DE02, and the value of no. of customers for DE01 is 500 and for DE02 is 200,
    then  it should display  like below
    Germany : 700
    DE01 :500
    DE02:200.
    But the value that is displayed in the total is worng and it is displaying a lesser value than the actual sum,
    like in the above example
    Germany: 690
    DE01:500
    DE02: 200
    I have checked the key figure which calculates the value, it is correct, only issue is with the value displayed for the whole(parent node)
    please help me on this...
    Thanks in advance..
    Regards,
    Kalpana

    Hi.
    So no funny business going on with calculations in the key figure? Ok... Then I would want to know if it's happening for more than one user, more than one report and especially if it's happening for other hierarchies also.
    At any rate, run it in RSRT with execute and debug. Run with/without aggregates. Check results.
    I have come across the same symptoms twice and both times it was due to a problem with "corrupted" aggregates, so the node value would come from the agg (and be wrong for some tech reason that was fixed by the basis guys) and the single values would come from the cube.... Some explanation like that was given then, so if you got aggregates, get your basis guys to check them or simply dump them and recreate.
    If you dont have aggregates, then check if the hierarchy is ok. Maybe an attribute change run got messed up and didn't activate the hierarchy properly (I know, that should not happen and it will use the old active version, but anyway, just to check...).
    Regards
    Jacob

  • My sing keeps freezing and skipping to totally seperate song! why?

    i bought a song recently and it stops in the middle and it either goes to the next song or two songs ahead. It works on my siblings ipod's and we use the same computer is there a reason for this and how do i fix it?

    I had this problem with my old 20GB classic ipod, it all started when I began using my ipod for my running trainings, every day it used to get worse freezing every 10 minutos or so, then I got ****** and bought a new 80GB classic Ipod, I have it for about 3 weeks now and guess what? It started freezing or skiping songs also. I did a test where I synced the same library on my both ipod and the songs being skipped on my new one wasnt being skipped on the old one, so its a problem with the song, then I though it could be any damage in the ipod HD but my new ipod has no reason to be damaged, the only impact that it might have recived is from my running trainings, but the impacts are really weak. Other test I did was trying to remove the song being skiped from the ipod, everytime I did that my ipod couldnt be ejcted, it kept showing me the following message "The ipod canot be ejcted because it contains files that are used by another aplication." I had to unplug my ipod without ejecting it.

  • 30,60,90 Days Totals in sql query

    Hi All,
    Here I  have written a query to find the total for 30Days to calculate costs....
    These 30Days Amount will be populated into another table based on joins.
    I know we can do by case in the final update but lot of logic is going into temptables1 and 2, so please help...
    select distinct ip.membernbr,ip.patcom,ip.admitdate,ip.dischargerdate,dateadd(day,1,ip.dishargedate) as afterdishcargedatestart,
    dateadd(day,30,ip.dishargedate) as afterdishcargedateend, cd.specificdateofservice as ipdos, cd.specificdateofservicethry
    as ipdosthru
    into #inpatientdoshospice30
    from tbl_inpatient ip
    join claimsdetail cd on cd.membernbr=ip.membernbr
    join claims c on c.claimsseqnbr=cd.claimnsseqnbr
    where c.formnbr='inp'
    and cd.specificdateofservice between dateadd(day,1,ip.dishargedate)
     and dateadd(day,30,ip.dishargedate) 
    and cd.specificdateofservicethru
    between dateadd(day,1,ip.dishargedate)  and dateadd(day,30,ip.dishargedate) 
    --find part c hospice claims lines that that are already included in the inpatientcost(c.formnbr='INP')
    cost;
    --doing this in a separate step in case there are multiple inpatient claims which dos dates that overlap
    (e.g; 1/15 to 1/20 and ---1/18 to 1/20) causing us to overstate dollars
    select distinct ip.patcom,cd.claimssequencenbr
    into #Hospiceinpatientclaimnslines30
    from
    #inpatientdoshospice30 ip 
    join claimsdetail cd on cd.membernbr=ip.membernbr
    and cd.specificdateofservice between dateadd(day,1,ip.dishargedate)  and dateadd(day,30,ip.dishargedate) 
    and cd.specificdateofservicethru between dateadd(day,1,ip.dishargedate)  and dateadd(day,30,ip.dishargedate) 
    join claims c on c.claimsseqnbr=cd.claimnsseqnbr
    where c.formnbr='Hospice'
    --sum all hospice claims excluding those already included in the inpatient
    update pp
    set homehospicecost30day=isnull(sub.hospicecost,0)
    from inpatient pp
    left join(
    select ip.patcom,sum(isnull(cd.netamt,0.00)) as hospicecost
    from tbl_inpatient ip
    join claimsdetail cd on cd.membernbr=ip.membernbr
    and cd.specificdateofservice between dateadd(day,1,ip.dishargedate)  and dateadd(day,30,ip.dishargedate) 
    and cd.specificdateofservicethru between dateadd(day,1,ip.dishargedate)  and dateadd(day,30,ip.dishargedate) 
    join claims c on c.claimsseqnbr=cd.claimnsseqnbr
    where (c.formnbr='Hospice' or (c.formnbr='PartB' and cd.placeofservice in ('34')))
    and cd.claimsseqnbr not in (select cklaimseqnbr from #hospiceinpatientclaimlines30 sub where sub.patcom=ip.patcom)
    group by ip.patcom
    )sub
    on pp.patcom=sub.patcom
    I really appreciate your help.
    Thanks,
    Kalyan.

    The UPDATE can be written this way:
    update pp
    set    homehospicecost30day = isnull(sub.hospicecost,0)
    from   inpatient pp
    left   join(select ip.patcom,
                       sum(CASE WHEN cd.specificdateofservice between 
                                     dateadd(day,1,ip.dishargedate)  AND
                                     dateadd(day,30,ip.dishargedate) 
                                 AND cd.specificdateofservicethru between
                                     dateadd(day,1,ip.dishargedate)  and 
                                     dateadd(day,30,ip.dishargedate) 
                                THEN isnull(cd.netamt,0.00)
                                ELSE 0
                            END) as hospicecost30
                from   tbl_inpatient ip
                join   claimsdetail cd on cd.membernbr=ip.membernbr
                join   claims c on c.claimsseqnbr=cd.claimnsseqnbr
                 where  (c.formnbr='Hospice' or
                        (c.formnbr='PartB' and cd.placeofservice in ('34')))
                   and cd.claimsseqnbr not in (select cklaimseqnbr from
                                               #hospiceinpatientclaimlines30 sub
                                               where sub.patcom=ip.patcom)
                 group by ip.patcom)sub
    on pp.patcom=sub.patcom
    The pattern shows how you can add further days.
    I was not able to figure out the meaning of the temp tables, and since you said that you typed it from memory without access to the code, I don't trust that you got everything right. Give it a second look on Monday.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Totals are giving wrong on Query

    Hi All,
    I need help on this query.  When I run this query , my totals for 2 highlighted columns are
    196,239,847.80(Correct), 72,422,114.24(This total is Wrong).
    If I run the scripts separately my numbers are
    196,239,847.80(Correct), 55,009,193.94 (Correct)
    Something I am missing in the query. Any Help Appreciated.
    SELECT A.ServiceName,A.ServiceGroup,A.VoucherAmt,A.VoucherIssued,A.Voucher_Issue_Date,
     A.VoucherCancelled,isnull(B.RedeemedCount,0) as RedeemedCount,isnull(Sum(B.Amountredeem),0)
    as AmountRedeem,
     A.Voucher_ID,A.Grant_ID,A.Client_ID,A.AssessmentId FROM
     (SELECT Voucher_ID,Client_ID,Grant_ID,Sum(VoucherAmount) as VoucherAmt,Sum(VoucherCount)VoucherIssued,Voucher_Issue_Date,Sum(CancelledVoucher)VoucherCancelled
     ,ServiceName,ServiceGroup,AssessmentId from rpt.vwATRVoucherCount01
    Group BY ServiceGroup,ServiceName,Voucher_ID,Voucher_Issue_Date,Client_ID, Grant_ID,AssessmentId
    ) A
    LEFT JOIN
    (SELECT Voucher_ID,Client_ID,Grant_ID,sum(AmountRedeem) Amountredeem,sum(RedeemCount)RedeemedCount,ServiceName,ServiceGroup from rpt.[vwATRVoucherCount02]
    Group by Servicename,Voucher_ID,ServiceGroup,client_ID,Grant_ID
    )B
    ON A.Voucher_ID=B.Voucher_ID
    Group by A.ServiceName,A.ServiceGroup,A.Voucher_Issue_Date,A.Voucher_ID,A.Grant_ID,A.Client_ID,
       A.AssessmentId,A.VoucherAmt,A.VoucherIssued,A.VoucherCancelled,B.RedeemedCount

    Its is very difficult for us to suggest with your problem statement. If you can show us simplified form of your table and data, we would be able to help you further.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped.
     [Blog]

  • LG Extravert - Verizon Mobile Email - Google Calendar - All Day Events showing on wrong day

    I have an LG Extravert.  I installed and setup the Verizon Mobile Email application.  I added my gmail account.  I successfully pulls in my gmail calendar - BUT any of the events that as "All Day" events in google end up displaying on the wrong day on the LG Extravert.  If I drill into the event on the phone - it displays start and end times for the event.  Why does it do anything with time for an all day event?  and if it does (for some reason) still use times - why are the times off?  The timezone setup on my phone and google accounts all match.
    Please Advise...

    I am using the features of the Mobile Email application... I couldn't find a way with the Extravert to integrate directly with the calendar application. 
    If a create an all day event on the phone... it looks ok in google... but when the phone alerts me of the event... it says the Start Time is 1:00 AM.  It seems like the Mobile Email Applications calendaring is not able to correctly handle All Day events.

  • IMovie wants to update again every day.  What's wrong?

    I recently upgraded to OSX Mavericks.  Then a lot of apps needed to be updated, including iMovie.  Now every day, I am prompted to update iMovie. When I open the app, it tells me it is the current version.  What's going wrong? Is there a file that got corrupted along the way?

    turns out it was a corrupted disk.  disk utility found it and fixed it.

  • My ipod nano 8th gen's battery can't last more than a day. What's wrong with it?

    Had my 8th gen nano for almost a year. It used to have decent charge for days because I only use it sparingly as a music player. I do use it as a watch with a TikTok but I unlock the screen only once in a while to see the time. Now the battery drains ridiculously fast in 1 day. Even with the screen off for most of the time, the next time I check the time/wake up the screen, battery gets drain by huge chunks. What am I doing wrong? Thanks in advance.

    Yes, notifications are part of the problem.  For more information look at at the previous posts on this problem.  Yu can find some of those on the right hand side of this page under the heading: More Like This.  I keep mine in airplane mode when asleep.

  • Calculating 30,60,90 Days Totals in sql

    Hi All,
    Here I  have written a query to find the total for 30Days for a perticular member after the discharge date.
    These 30Days Amount will be populated into another table based on joins.
    Now my question is i am trying to get the total for 60 Days , 90 Days and 180 Days.
    I can write Different queries changing datediff to 60,90,180 but i want all those fields in single query .
    please suggest how to write in single query.... 
    Select Distinct  ip.member
    sum(isnull(NetAmt,0.00)) as 30DaysAmount
    from claims c
    join claimsDetail cd on c.claimsnbr=cd.claimsnbr
    join inpatient ip on cd.membernbr=ip.membernbr
    where c.formnbr='SNF' 
    and (datediff(day,cd.specificdateofservice ,dischargedate) between 0 and 30
    group by ip.member
    I really appreciate your help.
    Thanks,
    Kalyan.

    Hi Visakh16/Dan,
    I tried using case statement in select statement itself using 
    case when datediff(d,cd.specificdateofservice,dischargedate) between 0 and 30 then sum(isnull(NETAMT),0.00)
    then it throws an error i cannot use between in select, then i removed then it says all other columns not part of aggregate must be part of group by(similar to that)
    Then i included all  other fields in group by, but i am worried will the value be correct ?
    Thanks for your reply i will try using your query as above:using SUM(case.....)
    I dont have access to work network, so i am writing general wordings of errror and query...
    Thanks,
    Kalyan.
    The CASE..WHEN should be inside the SUM
    you can also use this
    Select ip.member,
    sum(case when datediff(day,cd.specificdateofservice ,dischargedate) >= 0 and datediff(day,cd.specificdateofservice ,dischargedate) <= 30 then isnull(NetAmt,0.00) else 0.00 end) as 30DaysAmount,
    sum(case when datediff(day,cd.specificdateofservice ,dischargedate) >= 0 and datediff(day,cd.specificdateofservice ,dischargedate) <= 60 then isnull(NetAmt,0.00) else 0.00 end) as 60DaysAmount,
    sum(case when datediff(day,cd.specificdateofservice ,dischargedate) >= 0 and datediff(day,cd.specificdateofservice ,dischargedate) <= 90 then isnull(NetAmt,0.00) else 0.00 end) as 90DaysAmount,
    sum(isnull(NetAmt,0.00)) as 180DaysAmount
    from claims c
    join claimsDetail cd on c.claimsnbr=cd.claimsnbr
    join inpatient ip on cd.membernbr=ip.membernbr
    where c.formnbr='SNF'
    and datediff(day,cd.specificdateofservice ,dischargedate) between 0 and 180
    group by ip.member
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • TCODE for report of a single day total transaction

    Dear all
    Please tell me a TCODE by which I can see the report which show all the transaction and total balance of a g/l for a single day
    Thanks and regards
    Tamal

    HI,
    Program         Description                                                    T Code
    RFEPOJ00     Line Item Journal                           S_ALR_87009828
    RFBNUM00     Gaps in Document Number Assignment     S_ALR_87009880                                                                               
    S_ALR_87101003 General Audit
    RFVBER00     List of  Update Terminations     S_ALR_87101004
    RFBELJ00     Compact Document Journal     S_ALR_87009826
    Please check and confirm.
    Thanks and Regards
    Binoj M D

Maybe you are looking for