Db adap

db adapter in soa 11g.
we have table with 5 columns and created a db adapter on this table. we later change and alter this table now it has 7 columns. shouldnt our existing db adapter automatically syncronize to 7 columns ?? its not happening even after we doucle click and run the db adapter wizard.
do we have to delete the existing adapter and recreate new each time a columns gets added ?

Hi,
Running the wizard again (with next next..) will not help. You have to search again the table in order to update it.
When you use the DbAdapter wizard, you are actually "getting help" with wrapping a db connection & operation to a service. In the end of this wizard,
you will end up with some files and configuration at your Composite level, that will later on be part of your process.
That is why, when you alter the table, it is not being automatically changed in your process.
Arik

Similar Messages

SAP MMC disk + work Stop(Ecc6( Adap+jav),win 2003 -32 bit , oracle-10.2)

Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization           DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno      00
M sid        ACC
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    111
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm)          18672     (1436)
M DpShMCreate: sizeof(tm_adm)          4232256     (21056)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1536)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06DF1478   06DF6A14   06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06DF1478   06DF6A14   06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C     SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c    12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c    12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10283]
M
M Info for wp 0
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    req.vm = no VM
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Thu Apr 16 14:07:46 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10486
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c   327]
thanks for support
keshava

Hi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ACC
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, Unicode, optimized
pid        3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 111 successfully loaded
     shared lib "dw_xtc.dll" version 111 successfully loaded
     shared lib "dw_stl.dll" version 111 successfully loaded
     shared lib "dw_gui.dll" version 111 successfully loaded
     shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00                             <
DpShMCreate: sizeof(wp_adm)          18672     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00                             <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework

I use Yahoo as my home page. As soon as I left it, the screen was grabbed by something that took it to a page including "adap.tv" in the URL. Help!

I use current version of Firefox on a Windows XP desktop machine. I normally use Yahoo as my home page and Firefox as my browser. Starting a few weeks ago, when I clicked on a link on the main Yahoo page, I would get about one second of whatever it was I wanted to read or see then another screen that included "adap.tv" in the very long URL would replace it. Starting yesterday, this program began to override the security settings in Firefox that told it to NOT change the home page and I now get about one second of Yahoo before it switches to a page with "adap.tv" in the "URL". I have reloaded Firefox without success.

Try to reset your Firefox
* https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

Receiver file adaper

HI.
We want to keep an order to output the file by receiver file adapter.
The sender adapter is set to eoio.
We have multiple java instances, so multiple receiver adaper works.
How can I do?
regards,

Hi C J
Queue prioritization will be useful for you
Refer the thread we are already following same type of issue
R3 queue prioritizing
Thanks
Gaurav

How to get ethernet packet directly from adaper in labview6.1

I want to get the ethernet packet directly from adaper directly. Which control or function should I use?

If you really need to work with raw ethernet frames, I think you'll want to turn to something outside of built-in LabVIEW functionality.
One approach would be to purchase or download dedicated packet-capture (aka packet sniffer, network monitor) software that provides a developer API (e.g. a DLL with various packet access/filtering/analysis functions), then access that API from LabVIEW (e.g. by using the Call Library Function Node).
Here's one such piece of software, called WinPCap:
http://winpcap.polito.it/
You didn't give many details about your application.
So, I'm going to get up on my soapbox for a moment and urge you to reconsider whether you really need to go this low-level. I'd suggest carefully defining your goal and making sure you can't a
chieve it with higher-level functions like TCP Read and TCP Write in LabVIEW.
Best Regards,
John Lum
National Instruments

Problem w/New MacbookPro, Cinema 30, Mini DisplayPort to Dual-Link DVI Adap

Hi, I have a new MacBook Pro with Miniport connected to a Cinema 30 using the Mini DisplayPort to Dual-Link DVI Adapter. I upgraded from the previous version of the Macbook Pro w/built-in DVI and never had a problem.
From the moment I started using this new miniport adapter with the Cinema 30, I noticed intermittent graphic anomalies. Most of the time, discolored lines will start rapidly popping in and out across the screen - especially noticeable with dark backgrounds. Here are a couple of quick videos that visualize the problem.
Video 1 - http://is.gd/krM6
Video 2 - http://is.gd/krLT
I'm also experiencing issues with the cursor randomly jumping across the screen.
It's isolated to the 30 cinema and the adapter. The Macbook Pro works fine when connected tot he new 24" LED Cinema.
Any advice on what to do? Is it a faulty adapter? Is there a SW/Firmware upgrade?
Thank you!
http://store.apple.com/us/product/MB571Z/A?n=cable_adapter&fnode=MTY1NDA5OQ&mco= MjkyNjI0Mg&s=topSellers
Message was edited by: bsolis

I'm having the exact same problem. Have you called Apple and if so, what did they say? I read in a magazine that you can switch to the NVIDIA GeForce 9600M GT graphics processor some how with in our computer. I don't know how or if this may solve the problem.

How to populate target directory from the source XML in Receiver File Adap?

Hi All,
Our scenario is IDoc - XI -(Receiver File adapter) File. Is it possible to populate complete "Target Directory" from the source XML message??
Lets say we added field to maintain target directory in Idoc structure and some how populated value to it, then grab this target directory from the IDoc-XML and pass in Comunication Channel. I think its possible through Variable Substitation ...just want to make sure and if sombody has done the similar scenario their inputs would be great.
Thanx
Navin

Hi,
Please see the belowlinks
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
/people/sriram.vasudevan3/blog/2005/11/21/effective-xsl-for-multimapping-getting-source-filenames-in-legacy-legacy-scenarios
Re: Dynamic File Name for Receiver File Adapter
Variable Substitution
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
try with adapter specific
Example code...
String newfilename="";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// Get Sourcefilename
String oldfilename=conf.get(key);
//extract first 3 chars of source filename
newfilename=oldfilename.substring(0,2);
//get the date
java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
dateformat.format( new java.util.Date() );
//append sourcedateL
newfilename=newfilenamedateformat"L";
// determine if prod/ dev / qa
map = container.getTransformationParameters();
senderService = (String) map.get("SenderService");
if(senderServcie.equald("Prod"){
newfilename=newfilename+"P";
// change to new file name
conf.put(key, newfilename+".tmp");
Change it according to your requirement
Regards
Chilla..

Can a Stored Procedure be called from a Rule (not using Scripted JDBC Adap)

Hello smart people,
Question: Can a stored procedure be called from a Rule without using the Scripted JDBC Resource Adapter?
What's Desired: The project has very strong sql developers and average at best Java developers. We have been successful at implementing the scripted JDBC Resource Adapter which makes use of Java Bean shells. The custom Java Bean shell contains code that calls a stored procedure. We are cool with that process.
However we would like to be able to set up a Rule that calls a Stored Procedure without jumping thru the Java Bean Shell layer. The Stored Procedures we will be developing will not access the tables in the Waveset database. Instead the Stored Procedures will be accessing custom tables in a custom database. The custom DBase will be housed on the same dBase server as the Waveset database.
Environment: Identity Manager 7.1. Oracle 10i, and Unix OS.
It seems to me that this task is possible, but the posts in this forum make it sound like perhaps it is not.
Do any of you smart people agree that it should be possible or better yet has anyone implemented such an approach?
Thanks.

We did this by putting all of the JDBC calls into a Java class, then instantiated that class and called the methods from within a rule. An example of a rule we used is this:
<Rule authType='UserMembersRule' name='List UserType'>
<block>
    <defvar name='adapter'>
      <new class='com.waveset.adapter.ScriptedJdbcResourceAdapter'/>
    </defvar>
    <invoke name='setResource'>
      <ref>adapter</ref>
      <invoke name='getObject' class='com.waveset.ui.FormUtil'>
        <ref>context</ref>
        <s>Resource</s>
        <s>Banner</s>
      </invoke>
    </invoke>
    <defvar name='jdbcHelper'>
      <new class='edu.bates.JDBCHelper'>
        <invoke name='getConnection'>
          <ref>adapter</ref>
        </invoke>
      </new>
    </defvar>
    <defvar name='userList'>
      <new class='java.util.ArrayList'/>
    </defvar>
    <invoke name='addQueryToList'>
      <ref>jdbcHelper</ref>
      <s>SQL QUERY HERE</s>
      <ref>userList</ref>
    </invoke>
    <ref>userList</ref>
</block>
<MemberObjectGroups>
    <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
</Rule>

How to get the name of the attachment in Sender Mail Adaper?

hi mates,
I've scenario a where in I need to pick up a mail with an attachment and change its extension and send it to target system using file adapter.
I'm able to pick up the mail with attachment using sender mail adapter but not able to get the name of the attachment so that I can use it in mapping or on the adapter configuration. How do I read the name of the attachment and manupulate it?
I looked at the thread sender mail adapter - attachment name But the solution is not described. I think Stefan is talking about the SP!2 for PI 7.0. I'm on XI 3.0 what is the equivalent SP for that, SP20? Stefan, can you please throw me more light on it?
I appreciate your valuable inputs
thx in adv
praveen

Thanks Aamir.
Earlier I replied to that thread asking for more details...but did not see the response...
anyways, thanks for your quick help..
but I wonder abt the PI SP12/ XI SP20 pre-requisite. We can have adapter modules on SPs lower than PI SP12/XI SP20 as well, can we not?
thanks
praveen

Outbound File Adaper : Dynamic configuration of FileSize and number of msg

I want to configure dynamically following parameters of Outbound file adapter
1) Number of Message equals
2)Elapsed time exceeds
3)File size exceeds
If we set all those parameter at designtime then automatically it stored at adapter.wsdl file but how can I change those parameter at runtime.
Let me know regarding this.
Thanks in Advance

Noway.
Only statically. Stop adapter, change in manually and restart adapter.
Or write your own adapter in java.
Or create several adapters with different configuration and pick appropriate adapter dynamically.

Problem with an alternative AC adap

Hi
one week ago i bought a zen microphoto 8gb and i should say its really really cool!
my problem is that i bought the pixmania ac adapter and it doesnt work. I can see the battery charging icon only when the display is "on", but i dont see the blue light around the Microphoto that i see when i charge it connected to the pc.
And infact it is not charging at all.
Is there a problem with my reader or its just that you can charge it only with his original Creative charger?
http://www.pixmania.com/dev/gui_web/...=663#avisconso
thanks and sorry for my poor englishMessage Edited by maxmg3 on 05-2-2006 03:8 PM

Your english is fine!
Try putting your Micro into 'Lock' mode then plug the charger in. It should work....

Receiver HTTP Adaper Response Message problem

We are using HTTP adapter as the receiver for one of our vendor to post XML PO's to vendor's URL.
We are using Transport Protocol-HTTP 1.0
Message Protocol-XI Payload in HTTP Body
Adapter Engine-Integration Engine.
When PO is posted good on vendor's site we get "200" as the reponse message and when PO is failed in the vendor system due to mapping problems still we get "200" response message, Vendor's are sending "400" message for the failure to update their system but our server is not waiting to get "400" response messages. It picks the message of "200" when PO is posted on vendor's URL it is not waiting to get the next message.
Does anyone can help me to resolve this problem.
Thanks in advance!
Mrudula Patel

Hi Mrudula,
Can you eloborate bit more on this scenario,
1) 200 - for posting successfully in Vendor's site
2) 400 - if Business logic fails at Vendor's site
3) ?? - Sucessful transaction (Biz Logic).
If there is only one response, which gives either 2 or 3, then you can pick up the appropriate one & post the sender with the results. The HTTP adapter's call closes once it recieves ANY reponse from recieving site (Vendor).
hope this helps.
Regards
Vishnu

Compact Flash Adap

Hi everybody, new to this forum so excuse me if I cover a topic already covered. I've done a search but nothing relevant and up to date comes up.
Ive got a Zen Vision great machine, it does everything I wanted and more BUT; I bought a compact flash adaptor from Jessops so I could transfer pictures from my Fuji cameras xd flash card to my Zen. When I try to transfer anything it says "compact flash is not formatted with a supported filesystem"
Please can somebody help as this is something I really need. How do I format the adaptor!!!
Many thanks

GaryY,
The player support file system formatted in FAT6 or FAT32. Perhaps that's why the problem lies if your CF card is in another type of file system.
Jason

Tion in thread "main" java.sql.SQLException: Io exception: The Network Adap

I know this has been posted repeatedly. However, I have tried all the generic solutions Mine is a little different.
1. I can connect with SQLPLUS to the database. I am on windows XP connecting to Oracle 10g on a Solaris box. So the listener is running.
2. Here is my tnsnames.ora entry which works with SQLPLUS:
I can tnsping this address
SID_NAME =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = IP_NUMBER)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = SID_NAME)
)I am trying to run the following sample code:
* This sample shows how to list all the names from the EMP table
* It uses the JDBC THIN driver. See the same program in the
* oci8 samples directory to see how to use the other drivers.
package basic;
// You need to import the java.sql package to use JDBC
import java.sql.*;
class Employee
public static void main (String args [])
       throws SQLException
    // Load the Oracle JDBC driver
    DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
    // Connect to the database
    // You must put a database name after the @ sign in the connection URL.
    // You can use either the fully specified SQL*net syntax or a short cut
    // syntax as <host>:<port>:<sid>. The example uses the short cut syntax.
    String url = "jdbc:oracle:thin:@IP_NAME:1521:SID_NAME";
    String userName = "USERNAME";
    String password = "PASSWORD";
    if (args.length > 0) url = args[0];
    if (args.length > 1) userName = args[1];
    if (args.length > 2) password = args[2];
    //Connection conn =
    // DriverManager.getConnection (url, userName, password);
Connection conn =
    DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=IP_NUMBER:1521)(PORT=1521)))(CONNECT_DATA=(SID=SID_NAME)(SERVER=DEDICATED)))", "USERNAME", "PASSWORD");
    // Create a Statement
    Statement stmt = conn.createStatement ();
    // Select the ENAME column from the EMP table
    ResultSet rset = stmt.executeQuery ("select object_name from user_objects");
    // Iterate through the result and print the employee names
    while (rset.next ())
      System.out.println (rset.getString (1));
}I also used the following IP
Connection conn =
      DriverManager.getConnection (url, userName, password);

Replace the url with
String url = "jdbc:oracle:thin:@IP_NUMBER:1521:SID_NAME";

Remove namespace prefix with the XMLAnonymizerBean is possible at SOAP Adap

Hello,
I am wondering is it possible Remove namespace prefix with the XMLAnonymizerBean at SOAP Receiver Adaptor?
Thanks

Hi Rajiv,
Pl. go through this blog:
/people/stefan.grube/blog/2007/02/02/remove-namespace-prefix-or-change-xml-encoding-with-the-xmlanonymizerbean
Also if you want to use this at sender side, SOAP adapter will not support. Please check stefans reply in this thread:
XMLAnonymizerBean doesnt work
Regards,
---Satish

Help with non-Creative Travel Adap

I have a Zen Plus V 8gb player. I bought a Hammacher Schlemmer travel adapter/converter (00v-240v) with USB port for an upcoming trip around the world. I plugged the USB cable into the mp3 player, however the little battery wasn't indicating that charging was occurring.
Does anyone have experience with this adapter, or can think of a reason it wouldn't be compatible? I've received feedback that it works with recharging Ipods via USB. I'm concerned I received a defecti've unit because the USB light doesn't shine as bright as the AC light when "charging" items.
http://www.hammacher.com/publish/73996.asp

Yes, I do see the blue lights fading in and out, so that did confuse me a bit. I probably didn't leave the player plugged in long enough to verify it was actually charging the battery a noticeable amount. Another problem that occurred was the converter/adapter has an auto-shutoff if it gets too hot. When I had the mp3 player hooked up, over about 20 minutes, a buzzing slowly became louder, until the adapter did the auto shutoff.
That worried me a bit given it can take 6 hours to charge the player, and?I'm going to be staying in public hostels where the?noise would be too likely to bother others around me.

Db adap

Similar Messages

Maybe you are looking for