Db_hotbackup segfaults with -D option

Running db_hotbackup with the -D option, along with a DB_CONFIG that does not contain a set_lg_dir command gives a segmentation fault. The script below tells the tale. This is with BDB 4.8.30. There's a simple workaround, so we're not stuck.
$ ./ex_tpcb -i -a 1000 -b 8 -t 48 -s 9999
$ ./db_hotbackup -v -h ./TESTDIR -b ./HOTDIR
db_hotbackup: hot backup started at Tue Jun 29 10:41:24 2010
db_hotbackup: copying ./TESTDIR/teller to ./HOTDIR/teller
db_hotbackup: copying ./TESTDIR/history to ./HOTDIR/history
db_hotbackup: copying ./TESTDIR/branch to ./HOTDIR/branch
db_hotbackup: copying ./TESTDIR/account to ./HOTDIR/account
db_hotbackup: copying ./TESTDIR/access.db to ./HOTDIR/access.db
db_hotbackup: copying ./TESTDIR/log.0000000001 to ./HOTDIR/log.0000000001
db_hotbackup: lowest numbered log file copied: 1
db_hotbackup: ./HOTDIR: run catastrophic recovery
db_hotbackup: ./HOTDIR: remove unnecessary log files
db_hotbackup: hot backup completed at Tue Jun 29 10:41:27 2010
# That worked, we're not using -D.
$ rm -rf HOTDIR
$ cat > TESTDIR/DB_CONFIG
set_cachesize 0 536870912 1
$ ./db_hotbackup -D -v -h ./TESTDIR -b ./HOTDIR
db_hotbackup: hot backup started at Tue Jun 29 10:41:59 2010
Segmentation fault
# Oops.
# Debug it with gdb....
gdb ./.libs/db_hotbackup
(gdb) run -D -v -h ./TESTDIR -b ./HOTDIR
Starting program: /Users/clients/sleepycat/dbdev/release/db-4.8.30/build.danotcl/.libs/db_hotbackup -D -v -h ./TESTDIR -b ./HOTDIR
Reading symbols for shared libraries ++. done
db_hotbackup: hot backup started at Tue Jun 29 10:45:40 2010
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_INVALID_ADDRESS at address: 0x0000000000000000
0x00000001001be030 in __os_abspath (path=0x0) at ../dist/../os/os_abs.c:23
23 return (path[0] == '/');
(gdb) where
#0 0x00000001001be030 in __os_abspath (path=0x0) at ../dist/../os/os_abs.c:23
#1 0x00000001000015e9 in main (argc=0, argv=0x7fff5fbff150) at ../dist/../db_hotbackup/db_hotbackup.c:204
(gdb) up
#1 0x00000001000015e9 in main (argc=0, argv=0x7fff5fbff150) at ../dist/../db_hotbackup/db_hotbackup.c:204
204 if (db_config && __os_abspath(log_dir)) {
# Here's a workaround
$ cat >> TESTDIR/DB_CONFIG
set_lg_dir .
add_data_dir .
$ ./db_hotbackup -D -v -h ./TESTDIR -b ./HOTDIR
db_hotbackup: hot backup started at Tue Jun 29 10:50:42 2010
db_hotbackup: copying ./TESTDIR/teller to ./HOTDIR/teller
db_hotbackup: copying ./TESTDIR/history to ./HOTDIR/history
db_hotbackup: copying ./TESTDIR/DB_CONFIG.0 to ./HOTDIR/DB_CONFIG.0
db_hotbackup: copying ./TESTDIR/DB_CONFIG to ./HOTDIR/DB_CONFIG
db_hotbackup: copying ./TESTDIR/branch to ./HOTDIR/branch
db_hotbackup: copying ./TESTDIR/account to ./HOTDIR/account
db_hotbackup: copying ./TESTDIR/access.db to ./HOTDIR/access.db
db_hotbackup: copying ./TESTDIR/./teller to ./HOTDIR/./teller
db_hotbackup: copying ./TESTDIR/./history to ./HOTDIR/./history
db_hotbackup: copying ./TESTDIR/./DB_CONFIG.0 to ./HOTDIR/./DB_CONFIG.0
db_hotbackup: copying ./TESTDIR/./DB_CONFIG to ./HOTDIR/./DB_CONFIG
db_hotbackup: copying ./TESTDIR/./branch to ./HOTDIR/./branch
db_hotbackup: copying ./TESTDIR/./account to ./HOTDIR/./account
db_hotbackup: copying ./TESTDIR/./access.db to ./HOTDIR/./access.db
db_hotbackup: copying ./TESTDIR/./log.0000000001 to ./HOTDIR/./log.0000000001
db_hotbackup: lowest numbered log file copied: 1
db_hotbackup: ./HOTDIR: run catastrophic recovery
db_hotbackup: ./HOTDIR: remove unnecessary log files
db_hotbackup: hot backup completed at Tue Jun 29 10:50:44 2010
# Works!

Hi Don,
The internal SR number for this is: #18841 and it will be fixed. Thanks for reporting it.
Sandra

Similar Messages

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?

settings -> iTunes & App Store
click on apple ID listed there
select Sign Out
sign in with the proper account
from then on, when the store ask for your password it should be with the correct ID

Error when creating index with parallel option on very large table

I am getting a
"7:15:52 AM ORA-00600: internal error code, arguments: [kxfqupp_bad_cvl], [7940], [6], [0], [], [], [], []"
error when creating an index with parallel option. Which is strange because this has not been a problem until now. We just hit 60 million rows in a 45 column table, and I wonder if we've hit a bug.
Version 10.2.0.4
O/S Linux
As a test I removed the parallel option and several of the indexes were created with no problem, but many still threw the same error... Strange. Do I need a patch update of some kind?

This is most certainly a bug.
From metalink it looks like bug 4695511 - fixed in 10.2.0.4.1

SSRS report with tabular model – Create a dropdown report parameter with "None" option as the top value.

Hello Everyone,
I would like to create SSRS single select dropdown list parameter (it is using MDX query in dataset) with "None" option at the top. Note: this parameter is dependent parameter and getting filtered based on the selection of another parameter.
How can I add hard-coded "None" text at the top of the parameter values? Can Union function help me to add this hard-coded value? The purpose is, when user selects None from the dropdown ignore the condition of the parameter from MDX query else
use the selected value in query condition.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi Ankit,
In your scenario, you can achieve your requirement in report level other than in query. Add a Filter like:
Expression: =IIF(Parameters!Name.Value="None",1,Fields!Name.Value)
Operator:=
Value: =IIF(Parameters!Name.Value="None",1,Parameters!Name.Value)
In this case, report will ignore this parameter, and show all the records on the report when selecting “None” value. I have tested it on my local environment, the screenshots below are for you reference.
Reference:
Add a Filter to a Dataset (Report Builder and SSRS)
Regards,
Charlie Liao
TechNet Community Support

Can the Terminal add a user(with all options) on a single line?

Howdy All,
Can the Mac Terminal add a user, with all options desired, on a single line?    If so, can I get an example of this single terminal line to work from?
Thanks

Thanks Drew!   You have some great thoughts there. Perhaps I should provide a clearer environment of each high school(4). All classrooms have a lock down Windows environment. (There are no Macs any where in any classrooms.) The mini-tower will be the only Mac on each high school campus. we're in Dell country. The desktops are locked in such a way that only the ghosted/installed software on each hard drive works and no other software can be installed. USB sticks can't run any exe, jar, or other executable file. Even the other drives on the network can't run them. This has been setup to prevent students from bringing games into the environment and running them. Only the single classroom in each high school, where Web Tech is taught, has a ftp tool installed. Students cannot bring and use their own laptops either. So there really isn't any stray ftp activity happening. You cannot "ftp" out of the network! And there is only the one Mac available per campus. All this makes it certainly easier to maintain for sure. I am the only user in the school district they let run a personal laptop...mine has Ubuntu (tweaked). My knowledge of Linux has led them to assign this project to me. They are MS based entirely and so is their knowledge base.
I've got to teach the other 4 teachers how to manage the mini-tower. Basically it is this:
     Start and stop Apache2,
     Start and stop vsftp,
     Add ftp users(students will only have directory:           /Library/Server/Web/Data/Sites/Default/studentlastname.firstname ) Students will not log on to the min-   tower directly as any normal user would, but only through ftp. (I.E. no /home directory) ,
     Remove/delete students as needed
     (I'll pre-install cgi-bin scripts on these to keep it simpler on the other teachers and myself.)
With this in mind, you can see why a basic script or single command line to install these students would be great! I want to keep it simple to avoid mistakes the teachers might make adding users. Once I understand adding a user (in a terminal) better on a Mac, I may write a script to make it happen for them.
I'd also like to understand removing/deleting a student/user better to insure everything is gone when executed.
I hope this clear things up. Any help is much appreciated.    THANKS!!!

Problem 1 in my person form: hitting ora-1401 (view with check option).

In an earlier stage I had a table PERSON and a table ENSEMBLE.
At some stage I decided it was not handy I was storing performing musicians in two different tables.
So I set up a supertype, CONTRIBUTOR. PERSON is now a view on CONTRIBUTOR.
The attribute IS_NATURAL_PERSON makes the record listed in person.
The view definition is
CREATE OR REPLACE FORCE VIEW "PARTITUREN"."PERSON" ("ID", "FIRST_NAME",
"MIDDLE_INIT", "LAST_NAME", "GIVEN_NAME", "SORT_KEY", "DISPLAY_VALUE",
"GENDER", "DATE_OF_BIRTH", "DATE_OF_BIRTH_APPROX", "LOCATION_OF_BIRTH",
"DECEASED", "DATE_OF_DEATH", "DATE_OF_DEATH_APPROX", "LOCATION_OF_DEATH",
"NATIONALITY", "ANV_ID", "NUMBERING_SYSTEM", "OPUSNUMBERS", "PORTRAIT",
"MIME_TYPE", "FILE_NAME", "IS_NATURAL_PERSON", "LWTIMEST", "CREATED_BY",
"CREATED_TS", "UPDATED_BY", "UPDATED_TS")
AS
SELECT
    id,
    first_name,
    middle_init,
    last_name,
    given_name,
    sort_key,
    display_value,
    gender,
    date_of_birth,
    date_of_birth_approx,
    location_of_birth,
    deceased,
    date_of_death,
    date_of_death_approx,
    location_of_death,
    nationality,
    anv_id,
    numbering_system,
    opusnumbers,
    portrait,
    mime_type,
    file_name,
    is_natural_person,
    created_ts lwtimest,
    created_by,
    created_ts,
    updated_by,
    updated_ts
FROM
    contributor
WHERE
    is_natural_person='Y'
WITH CHECK OPTION;When I enter a record in Apex, I have the is_natural_person attribute default to Y.
However I always hit ora-1401.
It works in sql*developer and sql*plus.
I now always have to resort to non-Gui tools to enter someone. This is nasty.
Oracle 11.2.0.1, Apex 4.0.0.0.46
Sybrand Bakker
Senior Oracle DBA

Hello .
Some NLS charsets (such as UTF8) require more than one byte to store accented characters like "Ȩ", "ȿ", "�", "�", "ȵ", "ȭ" in the database.
For example, when a 10 character string is inserted into a varchar2(10) column, the above messages may be signaled if your string contains accentuated characters such as "Ȩ", "ȿ", "�", �", "ȵ", "ȭ". used in languages like German
One solution
If the UTF8 NLS charset is being used with French, German ... characters in an Oracle database, then the size of the target column length should be set accordingly.
Set the NLS_LANGUAGE and NLS_CHARACTERSET database parameters.
One approach is to change the Database settings as follows:
ALTER DATABASE CHARACTER SET WE8ISO8859P1;
SHUTDOWN IMMEDIATE
Onother
According to the Oracle documentation, column length semantics determine whether the length of a column is specified in bytes or in characters. You use BYTE to specify that the length is in bytes, and you use CHAR to specify that the length is in characters. CHAR length semantics is also known as codepoint length semantics.
Because some character sets require more than one byte for each character, a specification of 10 BYTE for a column might actually store less than 10 characters for certain character sets, but a 10 CHAR specification ensures that the column can store 10 characters, regardless of the character set.
You set the length semantics for an Oracle database using the NLS_LENGTH_SEMANTICS initialization parameter, and all VARCHAR2 and CHAR columns use the setting specified for this initialization parameter as the default. If this initialization parameter is not set, then the default setting is BYTE.
Edited by: Mortus on Jun 28, 2011 2:57 PM

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

Print or download ALV report with sort options

Dear friends,
How i can download into excel or print ALV report with sort options, like customer name column with similar values should not repeat in the print out or download file.
Regards,
Praveen Lobo

Hi Praveen,
Use this code, its working:-
*FOR SORTING DATA
DATA : it_sort TYPE slis_t_sortinfo_alv,
       wa_sort TYPE slis_sortinfo_alv.
*          SORT W.R.T. CUSTOMER NAME
wa_sort-spos = 1.
wa_sort-fieldname = 'NAME1'. "field customer name
wa_sort-tabname = 'IT_KNA1'. "internal table with records
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
"this will sort the ALV o/p for customer with same name
"now the name will not be repeated
"records with same name will be grouped
*          DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program                = sy-repid "report id
    it_fieldcat                       = it_field "field catalog
    it_sort                           = it_sort "sort info
TABLES
    t_outtab                          = it_kna1 "internal table
EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
ENDIF.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir
Edited by: Tarun Gambhir on Dec 31, 2008 1:13 PM

How do I enable flash and java on firefox23 as I have the latest versions installed yet the plugin page shows "disabled" with no option to enable

I have updated to Firefox 23 and it disabled my Java and Flash plugins. I then updated these to Flash 11.8.800.94 and Java to Version 7 Update 25. Now these are showing up on the plug in page but are showing "disabled" with no option to enable. How do I enable them to view content on the web.

Thanks Philipp but i have already done that and the content started working...
However, when i closed and restarted the browser it returned back to the same settings...
I dont think that should happen, but anyway thank you for the solution. At least I can use it by resetting the values if need be
Appreciate your help

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

HT204053 I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.

I need to use an existing ID (email address) on a new iPhone. It tells me "choose another ID - that one is in use," with the option to "use existing ID," however, it is an endless loop, referring me only to change my password on the existing ID.
How do I enable my new device with an existing ID - I do not need to change the password for the millionth time!
None of the FAQs (or the Community choices below) address new devices, they are all about APPS and iCloud stuff.

If it is an existing iCloud ID, you should be able to just go to Settings>iCloud and sign in with it.

How can i unlock my ipod touch? It is just saying disabled with no option to reset password???

How can i unlock my ipod touch if the screen keeps saying "ipod is disabled" with no option to enter my password???

How do I unlock my disabled ipod touch?

ORA-27054: NFS file system where the file is created or resides is not mounted with correct options

Hi,
i am getting following error, while taking RMAN backup.
ORA-01580: error creating control backup file /backup/snapcf_TST.f
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options
DB Version:10.2.0.4.0
while taking datafiles i am not getting any errors , i am using same mount points for both (data&control files)

[oracle@localhost dbs]$ oerr ora 27054
27054, 00000, "NFS file system where the file is created or resides is not mounted with correct options"
// *Cause: The file was on an NFS partition and either reading the mount tab
//          file failed or the partition wass not mounted with the correct
//          mount option.
// *Action: Make sure mount tab file has read access for Oracle user and
//          the NFS partition where the file resides is mounted correctly.
//          For the list of mount options to use refer to your platform
//          specific documentation.

Error while executing BBP_UPDATE_PORG Tr Code with ADD Option

Hi All,
I changed the Back end Vendor Master Data - Purchasing View (Example Accounting Number) and run the BBPUPDVD Tr code in SRM. The Business Partner (Vendor) data is updated correctly in SRM System from Back End System.
We have set of purchasing organisations like one local (SRM) Purchasing Organisation and respective Back end Purchasing Organisation (account number). When ever I run BBPUPDVD, the SRM system updates the backend vendor master data with back end purchasing organisation into SRM Standard tables. Then I am running BBP_UPDATE_PORG Tr code to have updated data into SRM Local Purchasing Organisation. I am receiving error message.
Example Scenario:
step 1: Present values in Vendor Master Vendor Number 100250, Purchaing Organisation : 1010 A/c Number: 100250-1010
and I changed the account number as 10025o-test for vendor 100250 and pur organisation 1010.
step 2: I run the BBPUPDVD in SRM System.
Step 3: I checked the values in BBPMAININT - vendor data (for backend vendor number 100250 and backend pur organisation - 1010). The SRM system replicates the values correct.
Step 4: I executed BBP_UPDATE_PORG and replaced the local (SRM) business partner (for local vendor number - 100250 and local purchasing organisation) - REPLACE Option. Then SRM replaces the SRM Business Partner (local) Data with Back end Vendor Master Data and also Back End vendor master data is deleted in SRM System. Now I have updated business partner details in SRM System as SRM Local an no SRM Back End Vendor Master Data in SRM System. This step is working fine.
Step 5: One more time I am executing BBP_UPDATE_PORG Tr code with Add option to have SRM Back End Details (in SRM System) from SRM Local Details (SRM System). Then the system is error message in SM13 Tr code.
Kind Note: There is no SRM Back End Vendor details in SRM System which I want to have with the help of executing BBP_UPDATE_PORG Tr code with Add option.
For analysis I went to ST22 (dump Analysis), the SRM gave an error message like:
Runtime Error          DYNPRO_SEND_IN_BACKGROUND
Date and Time          09/15/2008 10:56:58
ShrtText
     Screen output without connection to user.
What happened?
     Error in ABAP application program.
     The current ABAP program "SAPLBBP_PARTNER_MAINT" had to be terminated because
      one of the
     statements could not be executed.
     This is probably due to an error in the ABAP program.
Information on where terminated
    The termination occurred in the ABAP program "SAPLBBP_PARTNER_MAINT" in      "BBP_PORG_INSERT".
    The main program was "RSM13000 ".
    The termination occurred in line 59 of the source code of the (Include)      program "LBBP_PARTNER_MAINTU11"
    of the source code of program "LBBP_PARTNER_MAINTU11" (when calling the editor      590).
    The program "SAPLBBP_PARTNER_MAINT" was started in the update system.
   56
   57 * update database
   58   IF NOT LT_FRG0060_NEW[] IS INITIAL.
>>>>>     INSERT BBPM_BUT_FRG0060 FROM TABLE LT_FRG0060_NEW.
   60   ENDIF.
   61
   62   IF NOT LT_FRG0061_NEW[] IS INITIAL.
   63     INSERT BBPM_BUT_FRG0061 FROM TABLE LT_FRG0061_NEW.
   64   ENDIF.
Kindly guide me or provide solution.
We are in SRM 4.0 and ECC 5.0.
Thanks a lot in advance.
Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Sep 15, 2008 9:09 PM
Edited by: KOYYA SUDARSANA NAIDU on Sep 17, 2008 8:46 PM

Hi All,
I changed the Back end Vendor Master Data - Purchasing View (Example Accounting Number) and run the BBPUPDVD Tr code in SRM. The Business Partner (Vendor) data is updated correctly in SRM System from Back End System.
We have set of purchasing organisations like one local (SRM) Purchasing Organisation and respective Back end Purchasing Organisation (account number). When ever I run BBPUPDVD, the SRM system updates the backend vendor master data with back end purchasing organisation into SRM Standard tables. Then I am running BBP_UPDATE_PORG Tr code to have updated data into SRM Local Purchasing Organisation. I am receiving error message.
Example Scenario:
step 1: Present values in Vendor Master Vendor Number 100250, Purchaing Organisation : 1010 A/c Number: 100250-1010
and I changed the account number as 10025o-test for vendor 100250 and pur organisation 1010.
step 2: I run the BBPUPDVD in SRM System.
Step 3: I checked the values in BBPMAININT - vendor data (for backend vendor number 100250 and backend pur organisation - 1010). The SRM system replicates the values correct.
Step 4: I executed BBP_UPDATE_PORG and replaced the local (SRM) business partner (for local vendor number - 100250 and local purchasing organisation) - REPLACE Option. Then SRM replaces the SRM Business Partner (local) Data with Back end Vendor Master Data and also Back End vendor master data is deleted in SRM System. Now I have updated business partner details in SRM System as SRM Local an no SRM Back End Vendor Master Data in SRM System. This step is working fine.
Step 5: One more time I am executing BBP_UPDATE_PORG Tr code with Add option to have SRM Back End Details (in SRM System) from SRM Local Details (SRM System). Then the system is error message in SM13 Tr code.
Kind Note: There is no SRM Back End Vendor details in SRM System which I want to have with the help of executing BBP_UPDATE_PORG Tr code with Add option.
For analysis I went to ST22 (dump Analysis), the SRM gave an error message like:
Runtime Error          DYNPRO_SEND_IN_BACKGROUND
Date and Time          09/15/2008 10:56:58
ShrtText
     Screen output without connection to user.
What happened?
     Error in ABAP application program.
     The current ABAP program "SAPLBBP_PARTNER_MAINT" had to be terminated because
      one of the
     statements could not be executed.
     This is probably due to an error in the ABAP program.
Information on where terminated
    The termination occurred in the ABAP program "SAPLBBP_PARTNER_MAINT" in      "BBP_PORG_INSERT".
    The main program was "RSM13000 ".
    The termination occurred in line 59 of the source code of the (Include)      program "LBBP_PARTNER_MAINTU11"
    of the source code of program "LBBP_PARTNER_MAINTU11" (when calling the editor      590).
    The program "SAPLBBP_PARTNER_MAINT" was started in the update system.
   56
   57 * update database
   58   IF NOT LT_FRG0060_NEW[] IS INITIAL.
>>>>>     INSERT BBPM_BUT_FRG0060 FROM TABLE LT_FRG0060_NEW.
   60   ENDIF.
   61
   62   IF NOT LT_FRG0061_NEW[] IS INITIAL.
   63     INSERT BBPM_BUT_FRG0061 FROM TABLE LT_FRG0061_NEW.
   64   ENDIF.
Kindly guide me or provide solution.
We are in SRM 4.0 and ECC 5.0.
Thanks a lot in advance.
Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Sep 15, 2008 9:09 PM
Edited by: KOYYA SUDARSANA NAIDU on Sep 17, 2008 8:46 PM

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Db_hotbackup segfaults with -D option

Similar Messages

Maybe you are looking for