DB installs fails with [INS-30060] Check for group existence failed

Hi folks
as user jjayet I'm running on OEL 5.6 64 bits the following command to install DB 11gR2 :
$ /mntmats/SOAVM0504/AUTO_WORK/dbzip_shiphome/database/Disk1/runInstaller -ignoreSysPrereqs -invPtrLoc /ade/jjayet_dte9672/oracle/work/DATABASE1/oraInst.loc -force -silent -waitforcompletion -responseFile /ade/jjayet_dte9672/oracle/work/DATABASE1/db.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15258 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16454 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_06-07-54AM. Please wait ...[FATAL] [INS-30060] Check for group existence failed.
CAUSE: Unexpected error occurred while trying to check for group existence.
$ id
uid=511053(jjayet) gid=8500(dba) groups=8500(dba),59031(oinstall)
the problems seems relater to accessing /tmp
as the local disk is not enough to use the default /tmp (the DB install will fail with full disk error as the local disk space is very low )
I've created a partition from new disk to /tmp which I have then mounted (default is nfs3) :
# mount /dev/xvdc1 /tmp
# mount
/dev/xvdc1 on /tmp type ext2 (rw)
the result of DB install into /tmp is :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-xr-x 2 jjayet dba 4096 Apr 5 06:36 CVU_11.2.0.2.0_jjayet
drwxrwxrwx 7 root root 4096 Apr 5 06:36 .
if I umount /tmp but use the local /tmp
re-running the DB installer as user jjayet it does not raise the error above
and now local /tmp contains :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-x--- 10 jjayet dba 4096 Apr 5 06:25 OraInstall2012-04-05_06-25-28AM
drwxr-xr-x 3 jjayet dba 4096 Apr 5 06:25 CVU_11.2.0.2.0_jjayet
drwxrwxrwt 5 root root 4096 Apr 5 06:25 .
do you know how to use tmp over nfs with user jjayet so that the DB can install properly ?
it seems that the files created as user jjayet into mounted /tmp are not identified properly
thks in advance
jean

thks for the pointer
I found the post you mention but it does not help
it does not explain the root cause of the problem but just propose a workaround to pass an option to installer which will popi\up an interactive messgae at install time
as installation is done automatically through ADE / DTE I cannot use this workaround
any expert in oracle DB install can help ?
thks
Jean

Similar Messages

  • Bought a new iMac 27" yesterday.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

    I bought a new iMac 27" yesterday, running with Mavericks OS.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

    update manually,:  http://www.adobe.com/downloads/updates/

  • Failed to activate authorization check for user SAPSYS

    Hi Experts
    I am trying to run the sdcc, it was throwing time_out error. i have increased the work process runtime. now
    i am getting a error Failed to activate authorization check for user SAPSYS.
    Please help me to solve this issue.
    Regards
    Venkat

    Hi, Mr. Joe Bo.
    Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
    Basis Patch - 15, Kernel 159
    I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
    Thanks & Regards
    Venkatesan J

  • Runcluvfy.sh result: Check for ASMLib configuration failed

    I'm trying upgrade 11.1.0.7.0 to 11.2.0.3.0 on linux.
    runcluvfy.sh gives result as this:
    ==================================================================
    Checking ASMLib configuration.
    Node Name Status
    node1 (failed) ASMLib configuration is incorrect.
    node2 (failed) ASMLib configuration is incorrect.
    Result: Check for ASMLib configuration failed.
    ===================================================================
    here are some asm related:
    ==========================
    /etc/init.d/oracleasm listdisks
    DISK02
    /usr/sbin/oracleasm configure
    ORACLEASM_ENABLED=true
    ORACLEASM_UID=oracle
    ORACLEASM_GID=oinstall
    ORACLEASM_SCANBOOT=true
    ORACLEASM_SCANORDER=""
    ORACLEASM_SCANEXCLUDE=""
    /etc/init.d/oracleasm status
    Checking if ASM is loaded: yes
    Checking if /dev/oracleasm is mounted: yes
    Current two nodes RAC,ASM work fine.
    Can some one give hint what I should check about asm?
    Thanks

    ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 2
    Total space (kbytes) : 286460
    Used space (kbytes) : 3908
    Available space (kbytes) : 282552
    ID : 1116406961
    Device/File Name : /dev/ocr3
    Device/File integrity check succeeded
    Device/File Name : /dev/ocr2
    Device/File integrity check succeeded
    Cluster registry integrity check succeeded
    Logical corruption check bypassed due to non-privileged user
    crsctl query css votedisk
    0. 0 /dev/vote3
    1. 0 /dev/vote2
    2. 0 /dev/vote1
    Located 3 voting disk(s).
    ls -l /dev/oracleasm/disks
    total 0
    brw-rw---- 1 oracle oinstall 8, 145 Feb 24 13:17 DISK02
    /etc/init.d/oracleasm querydisk -d DISK02
    Disk "DISK02" is a valid ASM disk on device /dev/sdj1[8,145]
    thanks

  • How can I check for the existence of an XML file in Illustrator Javascript??

    I'm writing a Javascript to run at startup. I want to check for the existence of XML files and process them, if they are available. How can I check for their existence?

    Your first line just sets a variable to a string value… getFiles() is a method of Folder… so
    var InputXMLDir = Folder( "D:/Brackets/Create_Bracket_Graphics/Input/XML-n-Templates/" );
    Not a PC user so I can't remember if the colon is OK…? As you appear to know the file name why bother with a folder get files anyhow you could just check if the file exists then do some thing…
    alert( File( "D:/Brackets/Create_Bracket_Graphics/Input/XML-n-Templates/brackets_men_web.xml" ).exists );

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • I am on a MAC Application. It has  been rejected by following reason.  This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed. We recommend implementing receipt validation to reso

    I am on a MAC Application.
    It has  been rejected by following reason.
    This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
    We recommend implementing receipt validation to resolve this issue.
    At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
    Any help ?
    Thanks in Advance.

    I am on a MAC Application.
    It has  been rejected by following reason.
    This app does not check for the existence of a purchase receipt, which can prevent In-App Purchases from being correctly processed.
    We recommend implementing receipt validation to resolve this issue.
    At a minimum, the app will need to check for the existence of an App Store receipt and exit at launch with a status of 173 if it does not exist.
    Any help ?
    Thanks in Advance.

  • Checking for the existence of a Frame

    Hello,
    I am currently designing an application which consists of 8 JFrames (all in different classes), During the application, one JFrame provides information to a user and when they select the appropriate fields another JFrame opens an the active one closes. However the problem i am having is that i need to be able to write an if statement saying
    if (this particular frame exists already){
    destroy it;
    }else{
    whatever........};
    But i dont know how to check for the existence of a frame currently running, or how to destroy it..
    im currently using dispose(); to destroy frames but the dispose method only works when your in the class thats creating the frame, it wont let me write something like class1.dispose() (where class1 is the frame object created in the constructor of class1.java); in class2.
    I have searched throught the forum and havent found anything that can help me, i would really appreciate anyones input.
    Thanks in advance,
    Dev

    Hey its ok i've decided to restructure the program, but if anyone does know how to do this please still reply to the message, as i would still like to know

  • Checking for the existence of a file.

    I have a GUI to enter test info. A file is created based on the entered test number. I want to check for the existence of a file, and then notify the operator while not allowing the program to save it.

    This vi checks the presence of the input file.
    If file is not found, it will be created.
    regards
    ian.f
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com
    Attachments:
    File_check_existance_openorcreate_2003.vi ‏72 KB

  • Check for Preview Builds failing with error 0x080240438

    Checking for Preview Builds on my two machines, one running 9860 and one running 9879, is failing with "Failed to check for new preview build, please try again later.  0x80240438.
    Tried stopping Windows Update Service and clearing down the c:\Windows\SoftwareDistribution cache but to no avail. Windows Update (check for updates rather than check for preview builds) working fine.
    As ever would be nice to hear from MS on this.

    Hi,
    This seems to be the issue with the server side and should be fixed already.
    Check the fred andrews's reply in this thread:
    Error Code 0x80240438
    Quoted:
    fred andrews    replied on  November 16, 2014
    I was just on the phone with  Microsoft support they told me that the servers are down and they are working on it. I was told they should be up by tomorrow morning approx.. 4 hrs. 
    Best regards
    Michael Shao
    TechNet Community Support

  • CLUVFY failing with 'User Equivalence check failed for...'

    New 2 node RAC configuration. Oracle 10gR2, Linux RHEL 5 x64. I'm at the post hardware config, pre install clusterware stage.
    Running the cluster verification utility command:
    cluvfy comp sys -n node-01,node-02 -p crs -verboseReturns the following error:
    Verifying system requirement
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    Verification of system requirement was unsuccessful on all the nodes.I've verified the following:
    1) RSA keys correctly configured on both nodes and I can ssh between without a password
    2) ping ip and private work correctly to and from both nodes.
    3) user, group ids are identical on both systems.
    I also ran cluvfy stage -post hwos -n node-01,node-02 -verbose and received the following output. This output is from node-01. node-02's is identical, except with equivalence to itself failing.
    Checking node reachability...
    Check: Node reachability from node "node-01"
      Destination Node                      Reachable?
      node-02                       yes
      node-01                       yes
    Result: Node reachability check passed from node "node-01".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
      Node Name                             Comment
      node-02                       passed
      node-01                       failed
    Result: User equivalence check failed for user "oracle".
    WARNING:
    User equivalence is not set for nodes:
            node-01
    Verification will proceed with nodes:
            node-02
    Checking node connectivity...I get the same behavior on both nodes. Not quite sure what else to check. Any thoughts or suggestions? Thanks.

    No, no banners. And I followed note 300548.1 to the letter. Several times :-)
    However, I believe my issue has to do with a CVUHOME/cv/admin/cvu_config.
    According to the documentation:
    CV_XCHK_FOR_SSH_ENABLED—If set to TRUE, it enables the X-Windows check for verifying user equivalence with ssh. By default, this entry is commented out and X-Windows check is disabledIt was not, unfortunately, disabled by default - once I set it to false, everything succeeded. I still need to figure out why XCHK itself is failing, but I think I can troll through the log to figure that out.

  • Upgrade ASM to Grid Infrastructure failed with INS-20802

    Hello,
    I'm trying to update an ASM 10g to Grid infrastructure.
    Actually I have a DB wich run with ASM both on 10.2.0.4 on a Windows 2008 R2 server 64 bits.
    And try to upgrade with the 11gR2 Grid Infrastructure.
    Both the ASM instance and DB are stopped, ans i also try with the listener stop and even without listener.
    When I run the Grid's setup, it suggest me to make a Upgrade of Grid Infrastructure, it auto detect the current ASM instance INS-40413 Existing ASM insctance detected
    The install is OK but when it should Configure Oracle Grid Infrastructure for a Standalone Server, it stop with the INS-20802 Grid Infrastructure Configuration failed.
    Here is the last line of the log.
    INFO: C:\Users\oraadm\AppData\Local\Temp\2>D:\Oracle\product\11.2.0\grid/perl/bin/perl -ID:\Oracle\product\11.2.0\grid\perl\lib -ID:\Oracle\product\11.2.0\grid\crs\install D:\Oracle\product\11.2.0\grid\crs\install\roothas.pl -upgrade
    INFO: 2011-11-24 17:02:45: Checking for super user privileges
    INFO: 2011-11-24 17:02:45: superUser=oraadm groupName=Administrators
    INFO: 2011-11-24 17:02:45: domain=LU user=ORAADM
    INFO: 2011-11-24 17:02:45: User has oraadm privileges
    INFO: 2011-11-24 17:02:45: Parsing the host name
    INFO: Using configuration parameter file: D:\Oracle\product\11.2.0\grid\crs\install\crsconfig_params
    INFO: Creating trace directory
    INFO:
    INFO: C:\Users\oraadm\AppData\Local\Temp\2>exit /B 1
    WARNING:
    INFO:
    INFO: Completed Plugin named: Grid Infrastructure Configuration
    Really need assistance if someone can provide me with.
    Regards
    Anthony

    Hello,
    I opened a SR yesterday afternoon, still pending.
    I'm doing an upgrade Single Installation, yestersay I try again, do exactly the same things and the step failed at the Automatic Storage Management Configuration Assistant with the same error INS-20802
    But the log file says
    INFO: Read: Configuring ASM failed with the following message:
    INFO: Read: Configuring HA resource failed. The following error occured:
    INFO: Read: PRCR-1079 : Failed to start resource ora.asm
    INFO: Read: CRS-2674: Start of 'ora.cssd' on 'ludbs115' failed
    INFO: Read: CRS-5804: Communication error with agent process
    INFO: Read:
    INFO: Completed Plugin named: Automatic Storage Management Configuration Assistant
    The OracleOHservice is Started and the check has says that the service is online but a crsctl check css return CRS-4530 Communications failure contacting Cluster Synchronization Services Daemon.
    In the upgrade with asmca step by step, it says that doing a stop/start of has can resolve the issue but not here.
    I keep searching.
    Thank you
    Anthony

  • Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

    Hi Guys,
    For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
    But when I try to check Pre-requisite from command line, everything seems to be ok.
    This is what the output...
    $ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "sph1erp"
    Destination Node Reachable?
    sph1erp yes
    sph2erp yes
    Result: Node reachability check passed from node "sph1erp"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    sph2erp passed
    sph1erp passed
    Result: User equivalence check passed for user "oracle"
    Checking node connectivity...
    Checking hosts config file...
    Node Name Status Comment
    sph2erp passed
    sph1erp passed
    Verification of the hosts config file successful
    Interface information for node "sph2erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
    lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
    Interface information for node "sph1erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
    lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
    Check: Node connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
    Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
    Result: TCP connectivity check passed for subnet "10.10.16.48"
    Check: Node connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
    Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
    Result: TCP connectivity check passed for subnet "10.10.0.0"
    Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
    sph2erp lan900:10.10.1.174
    sph1erp lan900:10.10.1.173
    Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
    sph2erp lan2:10.10.16.51
    sph1erp lan2:10.10.16.50
    Result: Node connectivity check passed
    Check: Total memory
    Node Name Available Required Comment
    sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    Result: Total memory check passed
    Check: Available memory
    Node Name Available Required Comment
    sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
    sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
    Result: Available memory check passed
    Check: Swap space
    Node Name Available Required Comment
    sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    Result: Swap space check passed
    Check: Free disk space for "sph2erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph2erp /var 13.8074GB 1GB passed
    Result: Free disk space check passed for "sph2erp:/var/tmp/"
    Check: Free disk space for "sph1erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph1erp /var 13.8158GB 1GB passed
    Result: Free disk space check passed for "sph1erp:/var/tmp/"
    Check: User existence for "oracle"
    Node Name Status Comment
    sph2erp exists(199) passed
    sph1erp exists(199) passed
    Checking for multiple users with UID value 199
    Result: Check for multiple users with UID value 199 passed
    Result: User existence check passed for "oracle"
    Check: Group existence for "oinstall"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "oinstall"
    Check: Group existence for "dba"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "dba"
    Check: Membership of user "oracle" in group "oinstall" [as Primary]
    Node Name User Exists Group Exists User in Group Primary Comment
    sph2erp yes yes yes yes passed
    sph1erp yes yes yes yes passed
    Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
    Check: Membership of user "oracle" in group "dba"
    Node Name User Exists Group Exists User in Group Comment
    sph2erp yes yes yes passed
    sph1erp yes yes yes passed
    Result: Membership check for user "oracle" in group "dba" passed
    Check: Run level
    Node Name run level Required Comment
    sph2erp 3 3 passed
    sph1erp 3 3 passed
    Result: Run level check passed
    Check: Hard limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp hard 63488 63488 passed
    sph1erp hard 63488 63488 passed
    Result: Hard limits check passed for "maximum open file descriptors"
    Check: Soft limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp soft 1024 1024 passed
    sph1erp soft 63488 1024 passed
    Result: Soft limits check passed for "maximum open file descriptors"
    Check: Hard limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp hard 3687 3686 passed
    sph1erp hard 3687 3686 passed
    Result: Hard limits check passed for "maximum user processes"
    Check: Soft limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp soft 3687 2047 passed
    sph1erp soft 3687 2047 passed
    Result: Soft limits check passed for "maximum user processes"
    Check: System architecture
    Node Name Available Required Comment
    sph2erp ia64 ia64 passed
    sph1erp ia64 ia64 passed
    Result: System architecture check passed
    Check: Kernel version
    Node Name Available Required Comment
    sph2erp HP-UX B.11.31 B.11.31 passed
    sph1erp HP-UX B.11.31 B.11.31 passed
    Result: Kernel version check passed
    Check: Kernel parameter for "ksi_alloc_max"
    Node Name Configured Required Comment
    sph2erp 32768 32768 passed
    sph1erp 32768 32768 passed
    Result: Kernel parameter check passed for "ksi_alloc_max"
    Check: Kernel parameter for "executable_stack"
    Node Name Configured Required Comment
    sph2erp 0 0 passed
    sph1erp 0 0 passed
    Result: Kernel parameter check passed for "executable_stack"
    Check: Kernel parameter for "max_thread_proc"
    Node Name Configured Required Comment
    sph2erp 1024 1024 passed
    sph1erp 1024 1024 passed
    Result: Kernel parameter check passed for "max_thread_proc"
    Check: Kernel parameter for "maxdsiz"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxdsiz"
    Check: Kernel parameter for "maxdsiz_64bit"
    Node Name Configured Required Comment
    sph2erp 2147483648 2147483648 passed
    sph1erp 2147483648 2147483648 passed
    Result: Kernel parameter check passed for "maxdsiz_64bit"
    Check: Kernel parameter for "maxssiz"
    Node Name Configured Required Comment
    sph2erp 134217728 134217728 passed
    sph1erp 134217728 134217728 passed
    Result: Kernel parameter check passed for "maxssiz"
    Check: Kernel parameter for "maxssiz_64bit"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxssiz_64bit"
    Check: Kernel parameter for "maxuprc"
    Node Name Configured Required Comment
    sph2erp 3686 3686 passed
    sph1erp 3686 3686 passed
    Result: Kernel parameter check passed for "maxuprc"
    Check: Kernel parameter for "msgmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgmni"
    Check: Kernel parameter for "msgtql"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgtql"
    Check: Kernel parameter for "ncsize"
    Node Name Configured Required Comment
    sph2erp 35840 35840 passed
    sph1erp 35840 35840 passed
    Result: Kernel parameter check passed for "ncsize"
    Check: Kernel parameter for "shmmax"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "shmmax"
    Check: Kernel parameter for "shmmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "shmmni"
    Check: Kernel parameter for "shmseg"
    Node Name Configured Required Comment
    sph2erp 512 512 passed
    sph1erp 512 512 passed
    Result: Kernel parameter check passed for "shmseg"
    Check: Kernel parameter for "tcp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "tcp_smallest_anon_port"
    Check: Kernel parameter for "tcp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "tcp_largest_anon_port"
    Check: Kernel parameter for "udp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "udp_smallest_anon_port"
    Check: Kernel parameter for "udp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "udp_largest_anon_port"
    Check: Package existence for "OS-Core-B.11.31( ia64)"
    Node Name Available Required Comment
    sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
    Check: Operating system patch for "Patch PHKL_38938"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
    sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
    Result: Operating system patch check passed for "Patch PHKL_38938"
    Check: Operating system patch for "Patch PHKL_39351"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
    sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
    Result: Operating system patch check passed for "Patch PHKL_39351"
    Check: Operating system patch for "Patch PHSS_36354"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
    sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
    Result: Operating system patch check passed for "Patch PHSS_36354"
    Check: Operating system patch for "Patch PHSS_37042"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
    sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
    Result: Operating system patch check passed for "Patch PHSS_37042"
    Check: Operating system patch for "Patch PHSS_37959"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
    sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
    Result: Operating system patch check passed for "Patch PHSS_37959"
    Check: Operating system patch for "Patch PHSS_39094"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
    sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
    Result: Operating system patch check passed for "Patch PHSS_39094"
    Check: Operating system patch for "Patch PHSS_39100"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
    sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
    Result: Operating system patch check passed for "Patch PHSS_39100"
    Check: Operating system patch for "Patch PHSS_39102"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
    sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
    Result: Operating system patch check passed for "Patch PHSS_39102"
    Check: Operating system patch for "Patch PHSS_38141"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
    sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
    Result: Operating system patch check passed for "Patch PHSS_38141"
    Check: Operating system patch for "Patch PHCO_40381"
    Node Name Applied Required Comment
    sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
    sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
    Result: Operating system patch check passed for "Patch PHCO_40381"
    Check: Operating system patch for "Patch PHKL_38038"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
    sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
    Result: Operating system patch check passed for "Patch PHKL_38038"
    Checking for multiple users with UID value 0
    Result: Check for multiple users with UID value 0 passed
    Check: Current group ID
    Result: Current group ID check passed
    Starting Clock synchronization checks using Network Time Protocol(NTP)...
    NTP Configuration file check started...
    Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
    No NTP Daemons or Services were found to be running
    Result: Clock synchronization check using Network Time Protocol(NTP) passed
    Checking Core file name pattern consistency...
    Core file name pattern consistency check passed.
    Checking to make sure user "oracle" is not in "root" group
    Node Name Status Comment
    sph2erp does not exist passed
    sph1erp does not exist passed
    Result: User "oracle" is not part of "root" group. Check passed
    Check default user file creation mask
    Node Name Available Required Comment
    sph2erp 022 0022 passed
    sph1erp 022 0022 passed
    Result: Default user file creation mask check passed
    Checking consistency of file "/etc/resolv.conf" across nodes
    Node Name Status
    sph2erp passed
    sph1erp passed
    The DNS response time for an unreachable node is within acceptable limit on all nodes
    File "/etc/resolv.conf" is consistent across nodes
    Check: Time zone consistency
    Result: Time zone consistency check passed
    Checking settings of device file "/dev/async"
    Node Name Available Comment
    sph2erp yes failed (incorrect setting for minor number.)
    sph1erp yes failed (incorrect setting for minor number.)
    Result: Check for settings of device file "/dev/async" failed.
    Starting check for The SSH LoginGraceTime setting ...
    WARNING:
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
    Check for The SSH LoginGraceTime setting passed
    Fixup information has been generated for following node(s):
    sph2erp,sph1erp
    Please run the following script on each node as "root" user to execute the fixups:
    '/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    What could be the issue ????
    Any help would be appreciated...
    Regards,
    Manish

    Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
    sph1erp:/oracle/11.2.0/grid #sh root.sh
    Running Oracle 11g root script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /oracle/11.2.0/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    OLR initialization - successful
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
    CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
    CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
    CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
    CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
    ASM created and started successfully.
    Disk Group OCRVOTE created successfully.
    clscfg: -install mode specified
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    CRS-4256: Updating the profile
    Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
    Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
    Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
    Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
    Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
    Successfully replaced voting disk group with +OCRVOTE.
    CRS-4256: Updating the profile
    CRS-4266: Voting file(s) successfully replaced
    ## STATE File Universal Id File Name Disk group
    1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
    2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
    3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
    4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
    5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
    Located 5 voting disk(s).
    Start of resource "ora.cluster_interconnect.haip" failed
    CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
    CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    Failed to start Oracle Clusterware stack
    Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
    /oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
    sph1erp:/oracle/11.2.0/grid #
    Last few lines from CRS Log for node 1, where error came
    [ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
    2011-02-25 23:04:16.491
    [oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
    erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    2011-02-25 23:04:20.521
    [ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
    */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    =====================================================================================================
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
    2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
    owing error:
    Start action for HAIP aborted
    ] for start for resource: ora.cluster_interconnect.haip 1 1
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
    2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
    2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
    2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
    2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
    2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
    2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
    2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
    2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
    [   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
    Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    =====================================================================================================
    2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
    2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
    2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
    2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
    2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
    2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
    2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
    2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    What could be the issue ????
    Experts Please help me. Doing setup for the PRoduction Env...
    Do response ASAP...... Thanks
    Regards,
    Manish

  • Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics

    Dear Experts,
    I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
    In BI Dev, I use the option Necessary Object.
    While importing request into BI QA, it fails with a return code 12. Some of the errors are:
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
    System error in lock management
    Error AD 025 during after import handling of objects with type(s) IOBJ
    Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
    Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
    InfoObject 0ABCINDIC is not available in active version
    InfoObject 0ABCPRC_TYP is not available in active version
    InfoObject 0ABCPROCESS is not available in active version
    InfoObject 0ACCT_TYPE is not available in active version
    InfoObject 0ACTIONREAS is not available in active version
    This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
    But they are 'ACTIVE' in BI Dev.
    Please help me in resolving this issue.
    Thanks and BR,
    Raj Jain

    Hi I.R.K,
    I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
    I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
    The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
    Any ideas what may be the cause???
    Thanks,
    Raj Jain

  • Set-AzureServiceDiagnosticsExtension or publishing with diagnostitcs enabled fails with Azure SDK2.5 for existing Azure services

    Similar to https://social.technet.microsoft.com/Forums/systemcenter/en-US/487234f4-9748-4f49-ab7b-ce523da4c500/publish-cloud-service-fails-from-visual-studio-2013-update-4-published-asset-entry-for-image but since the given answer provides no solution
    and I found more details, I felt that opening this new question providing more details was necessary.
    I have an existing Azure service with two web roles (service and worker) published first in May 2012. Recently I tried to update from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD
    and in doing so, of course directly move to the new diagnostics version. So before publishing I enabled WAD diagnostics logging in the properties of both roles.
    Trying to publish from Visual Studio to the exisiting Azure Service fails, VS output shows  the following lines:
    11:45:24 - Checking for Remote Desktop certificate...
    11:45:25 - Applying Diagnostics extension.
    11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
    What's working 1: For testing purposes, I have created a new Azure service in the Azure portal.
    Publishing the same solution from the same development environment to this new service is possible without problems - the service with WAD diagnostics logging is working fine. Unfortunately this is no solution to my production service, with
    DNS alias and SSL certificates bound to the existing Azure service.
    What's working 2: Publishing the solution to the existing Azure service WITHOUT diagnositics enabled works.
    Problem with that: Trying to activate WAD diagnostics logging after publishing using the Azure cmdlets also fails WiTH a similar error message. Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx I
    tried:
    PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
    VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
    Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
    Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
    At line:1 char:1
    + Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
        + FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
       Extensions.SetAzureServiceDiagnosticsExtensionCommand
    The problem seems to be related to those service configuration parts in the cloud which are not replaced by a new deployment, so I compared both services using Azure cmdlet Get-AzureService.
    I found that the new service has properties which the old one is missing:
    ExtendedProperties      : {[ResourceGroup, myazureservice], [ResourceLocation, North Europe]}
    Is this a hint? Reinstalling or repairing Visual Studio is not the answer to this problem!!!
    What's the meaning of "Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml"?
    [Perhaps MS will publish a newer version of its Azure cmdlets, but that's not today's story]
    So what are possible reasons or fixes for this behaviour? Going back to log4net is not my favorite. Even worse, while there are alternative logging solution,
    I currently have no performance counter monitoring in the Azure portal (Remote desktop and perfmon is NO solution). Is there any alternative to going back to SDK2.4?
    Best regards,
     Andreas

    Hi Andreas,
    Thanks for your feedback.
    I will test and reproduce your issue on my side. Any information, I will post back for you.
    Thanks for your understanding.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for