DB Startup failed;terminating with error code 12

Hi Friends,
The system is at kernel patch 75,so I was applying the kernel patches by extracting the .SAR files into the /usr/sap/
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 Wed Jan 2 19:28:44 2008                             348 0.000348
4 ETW000 db_con_init called                                    30 0.000378
4 ETW000 create_con (con_name=R/3)                             78 0.000456
4 ETW000 Loading DB library '/usr/sap/SDV/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                              65 0.000521
4 ETW000 load shared library (/usr/sap/SDV/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                           50079 0.050600
4 ETW000 Library '/usr/sap/SDV/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                              80 0.050680
4 ETW000 function DbSlExpFuns loaded from library /usr/sap/SDV/SYS/exe/run/dboraslib.so
4 ETW000                                                                              94 0.050774
4 ETW000 *** ERROR => Version mismatch between kernel (700.08) and DBSL shared library (Ð¯ÐÛÐ¡ÅÌ)
4 ETW000                                                                             200 0.050974
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SDV/SYS/exe/run') or dbms_type ('ORA')"
So,the DB is unable to start & as a result,SAP system isn't available.
Request your help.
Thanks
Sandipan

Hello Sandipan,
>> SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
At first try to extract the SAR archives into /sapmnt/<SID>/exe, because of /usr/sap/<SID>/SYS/exe is just a symbolic link and maybe the permissions are different (maybe you have checked the link with 777).
Please try the following:
> mv /sapmnt/<SID>/exe /sapmnt/<SID>/exe.old
> SAPCAR -xvf <PATCH LOCATION> /sapmnt/<SID>/exe
After that run the saproot.sh script in /sapmnt/<SID>/exe and try to start the sap system.
Normally the error 28 shows some files which have the problems (maybe loaded or still open), if it is a library (*.a, *.so files) then execute the following command as root:
> slibclean
Regards
Stefan

Similar Messages

Startdb: Terminating with error code 12

Hi,
We are running ECC6.0.Databse : Oracle & OS : Solaris. I have done a new installation & after system copy when we start the sap I got the following error :
Running /usr/sap/QLT/SYS/exe/run/startdb
Trying to start QLT database ...
Log file: /export/home/qltadm/startdb.log
/usr/sap/QLT/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
Following is the error in startdb.log
qltadm> more startdb.log
Sun Aug 22 15:37:23 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start QLT database ...
Sun Aug 22 15:37:23 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/QLT/102_64<
ORACLE_SID   is >QLT<
Sun Aug 22 15:37:23 IST 2010
check initora
Sun Aug 22 15:37:23 IST 2010
check initora
Sun Aug 22 15:37:23 IST 2010
checking V2 connect
TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 22-AUG-2010 15:37:23
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/sap/QLT/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = lumax-qal) (PORT = 1
527))) (CONNECT_DATA = (SID = QLT) (GLOBAL_NAME = QLT.WORLD)))
OK (10 msec)
tnsping: V2 connect to QLT
Sun Aug 22 15:37:23 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Sun Aug 22 15:37:23 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Sun Aug 22 15:37:47 IST 2010
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Sun Aug 22 15:37:48 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4747952128 bytes
Fixed Size                  2035280 bytes
Variable Size            2399146416 bytes
Database Buffers         2332033024 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Sun Aug 22 15:38:03 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QLT/SYS/exe/run/startdb: Terminating with error code 12
qltadm>
Pl help in resolving this issue.
Thanks

Is your listener running? If not check your logs ...
Often you get this when DB isn't running and SAP needs to connect in order to start.
Also consider this - that if your environment is on cluster technology then startsap won't work - you will need something like this:
- As sidadm
startdb
startsap -t r3 -i ASCS00 -v c123biXXXacsxx
startsap -t r3 -i DVEBMGS00 -v c123dbXXXdbqxx

/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12

Hi Experts,
We have made a system copy from Production to Quality and it has been done successfully. Now we are able to open the database manually. But when we are trying to start SAP it is not connecting the database base and it is giving error which is given below :
/home/qasadm/startdb.log
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4764729344 bytes
Fixed Size                  2035312 bytes
Variable Size            2432700816 bytes
Database Buffers         2315255808 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Apr 12 10:45:40 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
^C
root@bsltest # tail -f /home/qasadm/startdb.log
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Apr 12 10:55:53 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Apr 12 10:56:22 IST 2010
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Apr 12 10:56:22 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 4764729344 bytes
Fixed Size                  2035312 bytes
Variable Size            2432700816 bytes
Database Buffers         2315255808 bytes
Redo Buffers               14737408 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Apr 12 10:56:42 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/QAS/SYS/exe/run/startdb: Terminating with error code 12
Kindly see the logs and request you to kindly help us how it will resolve this issue.
Regards,
Jitendra

We have made a system copy from Production to Quality
After client copy sap schema had been changed thats why its not connecting.
fyi: Client copy and system copy both are different
schema had been changed thats why its not connecting
This is one of the post installation step after doing a system copy(reffer the ssytem copy guide)
Problem has resolved
Great, suggest you to close this thread
Regards,
Nick Loy

SAP not starting after crash: Terminateing With error code 12

Hi,
After system crash SAP is not starting normally. When running startsap under SIDadm puts out: /usr/sap/TST/SYS/exe/run/startdb: Terminateing With error code 12
startdb.log shows that:
/oracle/TST/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shares object file: No such file or directory
I have checked - file and directory are present.
However - when manually starting DB under oraSID and then logging in as SIDadm and starting SAP - everything starts normally.
(Allthough SID is has been changed before - system also worked normally after SID change) I have checked userrights and groups , also profile - everything seems to be normal. Any ideas?
Edited by: Kristjan T on Mar 16, 2011 1:16 PM

Hi,
1.what UNIX Flavor are we talking about -> SuSe
2.What SAP Kernel Release is in place (may be 6.40 non EX2 ?) -> 6.40
3.What release is the DB suposed to have? -> 10.2.0.2.0 - 64bit Prod
4.I see, you are calling an sqlplus from a 10.2 ORACLE_HOME.
Is that the correct HOME the DB is running with ? -> Yes
5.Can you start the DB with
brconnect -c -u / -f dbstart -> NO
Error is:
:devadm 51> brconnect -c -u / -f dbstart
BR0801I BRCONNECT 7.00 (40)
oracleDEV: error while loading shared libraries: libskgxp10.so: cannot open shared object file: No such file or directory
BR0278E Command output of '/oracle/DEV/102_64/bin/sqlplus /nolog':
/oracle/DEV/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0279E Return code from '/oracle/DEV/102_64/bin/sqlplus /nolog': 127
BR0302E SQLPLUS call for database instance DEV failed
BR0303E Determination of Oracle version failed
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0804I BRCONNECT terminated with errors
(Different machine but same situation)
6.As already requested, what is the output of:
6.1.ldd sqlplus
:devadm 55> ldd sqlplus
ldd: ./sqlplus: No such file or directory
in addition:
6.2. env | grep -i ora
devadm 56> env | grep -i ora
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
dbms_type=ORA
dbs_ora_tnsname=DEV
dbs_ora_schema=SAPSR3
ORACLE_SID=DEV
ORACLE_BASE=/oracle
TNS_ADMIN=/usr/sap/DEV/SYS/profile/oracle
ORACLE_HOME=/oracle/DEV/102_64
SAPDATA_HOME=/oracle/DEV
6.3 env | grep -i nls
:devadm 57> env | grep -i nls
XNLSPATH=/usr/X11R6/lib/X11/nls
NLS_LANG=AMERICAN_AMERICA.UTF8
6.4 env | grep -i lib
devadm 58> env | grep -i lib
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
XNLSPATH=/usr/X11R6/lib/X11/nls
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig:/opt/kde3/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/share/pkgconfig
GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gnome/lib/gtk-2.0:/usr/lib/gtk-2.0
GTK_PATH64=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
Any ideas???
Br,
Kristjan T.

Stopdb - Terminating with error code 13

Hi experts,
on a linux ASE System I get the following error on executing stopdb:
./stopdb: Terminating with error code 13
I didn't really find something regarding this, does anybody know what it is about?
Kind regards

These are the last lines of <sid>log.
But as said, there is not entry created on executing stopdb.
e 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Database 'sybmgmtdb', checkpoint=(2347, 24), first=(23
47, 23), last=(2347, 32).
00:0006:00000:00001:2015/03/24 20:30:30.63 server Completed estimating recovery log boundaries for datab
ase 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Started ANALYSIS pass for database 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Completed ANALYSIS pass for database 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Log contains all committed transactions until 2015/03/
24 19:08:10.19 for database sybmgmtdb.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Started REDO pass for database 'sybmgmtdb'. The total
number of log records to process is 10.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Roll forward transaction '$dmpxact'.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Redo pass of recovery has processed 1 committed and 0
aborted transactions.
00:0006:00000:00001:2015/03/24 20:30:30.63 server Completed REDO pass for database 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.69 server Timestamp for database 'sybmgmtdb' is (0x0000, 0x0000a
5b3).
00:0006:00000:00001:2015/03/24 20:30:30.69 server Recovery of database 'sybmgmtdb' will undo incomplete
nested top actions.
00:0006:00000:00001:2015/03/24 20:30:30.69 server Started recovery checkpoint for database 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.71 server Completed recovery checkpoint for database 'sybmgmtdb'
00:0006:00000:00001:2015/03/24 20:30:30.71 server Started filling free space info for database 'sybmgmtd
b'.
00:0006:00000:00001:2015/03/24 20:30:30.71 server Completed filling free space info for database 'sybmgm
tdb'.
00:0006:00000:00001:2015/03/24 20:30:30.72 server Started cleaning up the default data cache for databas
e 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.72 server Completed cleaning up the default data cache for datab
ase 'sybmgmtdb'.
00:0006:00000:00001:2015/03/24 20:30:30.73 server Checking external objects.
00:0006:00000:00001:2015/03/24 20:30:30.84 server The transaction log in the database 'sybmgmtdb' will u
se I/O size of 16 Kb.
00:0006:00000:00001:2015/03/24 20:30:30.85 server Database 'sybmgmtdb' is now online.
00:0006:00000:00001:2015/03/24 20:30:30.85 server Recovery has restored the value of 'local async prefet
ch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
00:0006:00000:00001:2015/03/24 20:30:30.85 server Recovery has restored the value of 'local async prefet
ch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
00:0006:00000:00001:2015/03/24 20:30:30.95 server Recovery has restored the original size for '128K' poo
l and '16K' pool in 'default data cache'.
00:0006:00000:00001:2015/03/24 20:30:30.95 server Recovery complete.
00:0006:00000:00001:2015/03/24 20:30:30.96 server ASE's default unicode sort order is 'binary'.
00:0006:00000:00001:2015/03/24 20:30:30.97 server ASE's default sort order is:
00:0006:00000:00001:2015/03/24 20:30:30.97 server 'binary' (ID = 25)
00:0006:00000:00001:2015/03/24 20:30:30.97 server on top of default character set:
00:0006:00000:00001:2015/03/24 20:30:30.97 server 'utf8' (ID = 190).
00:0006:00000:00001:2015/03/24 20:30:30.97 server Master device size: 400 megabytes, or 204800 virtual p
ages. (A virtual page is 2048 bytes.)
00:0006:00000:00015:2015/03/24 20:30:31.23 kernel Initializing Job Scheduler Task
00:0006:00000:00015:2015/03/24 20:30:31.26 kernel Installed Job Scheduler sequencer code version 0.29 -
29 tokens
00:0006:00000:00015:2015/03/24 20:30:31.33 kernel Job Scheduler Task started with a clean 'js_history' t
able
00:0006:00000:00015:2015/03/24 20:30:31.43 kernel Job Scheduler Task state set to running, startcount 1.
00:0006:00000:00015:2015/03/24 20:30:32.34 kernel Job Scheduler Task connected with Agent on port 4903
00:0006:00000:00001:2015/03/24 20:30:32.34 kernel Warning: Cannot set console to nonblocking mode, switc
hing to blocking mode.
00:0006:00000:00001:2015/03/24 20:30:32.34 kernel Console logging is disabled. This is controlled via th
e 'enable console logging' configuration parameter.

BR0804I BRCONNECT terminated with error code 5

hi all,
we r exporting source system , at step 2 "Update database statistice" error occur
An error occurred while processing service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Source System Export > Central System > Based on AS ABAP > Database Instance Export( Last error reported by the step :Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERP/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/EXP.
BR0280I BRCONNECT thread 2: time stamp: 2010-03-17 13.32.29
BR0850I 69902 of 69902 objects processed - 82.467 of 82.467 units done
BR0204I Percentage done: 100.00%, estimated end time: 13:32
BR0001I **************************************************
BR0280I BRCONNECT time stamp: 2010-03-17 13.32.29
BR0848I Thread 2 finished with return code 0
BR0280I BRCONNECT time stamp: 2010-03-17 13.32.29
BR0879I Statistics checked for 0 tables
BR0878I Number of tables selected to collect statistics after check: 0
BR0880I Statistics collected for 69902/0 tables/indexes
BR0889I Structure validated for 0/83617/0 tables/indexes/clusters
BR0806I End of BRCONNECT processing: cecuoaya.sta 2010-03-17 13.32.29
BR0280I BRCONNECT time stamp: 2010-03-17 13.32.30
BR0804I BRCONNECT terminated with errors
ERROR      2010-03-17 13:32:30.171
           CJSlibModule::writeError_impl()
CJS-30023 Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.
ERROR      2010-03-17 13:32:30.187 [sixxcstepexecute.cpp:951]
FCO-00011 The step updateOracleStatistics with step key |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Pre|ind|ind|ind|ind|3|0|NW_ORA_Statistics_Update|ind|ind|ind|ind|0|0|updateOracleStatistics was executed with status ERROR ( Last error reported by the step :Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.)
plz guide

hi,
TST03, drop and recreate the index now export has failed 2 job outof 43,
export_monitor.java.log
Unloading of 'SAPAPPL0_4' export package: OK
Export Monitor jobs: running 1, waiting 30, completed 12, failed 0, total 43.
Export Monitor jobs: running 2, waiting 29, completed 12, failed 0, total 43.
Export Monitor jobs: running 3, waiting 28, completed 12, failed 0, total 43.
Unloading of 'SAPAPPL1_2' export package: ERROR
Export Monitor jobs: running 2, waiting 28, completed 12, failed 1, total 43.
Export Monitor jobs: running 3, waiting 27, completed 12, failed 1, total 43.
Unloading of 'SAPAPPL1_3' export package: ERROR
Export Monitor jobs: running 2, waiting 27, completed 12, failed 2, total 43.
Export Monitor jobs: running 3, waiting 26, completed 12, failed 2, total 43.
'SAPAPPL1_2.log
(RTF) ########## WARNING ###########
     Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145456
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145456
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL1_2.cmd -datacodepage 4103 -l SAPAPPL1_2.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: Export without hintfile
(GSI) INFO: dbname   = "PRD20090418030425                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "PRDSAP                                                          "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PRDSAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 23 Step 10)"
(GSI) INFO: instno   = "0020500723"
EXP) TABLE: "K002" #20100319145654
(EXP) ERROR: DbSlExeRead failed
rc = 103, table "K9RPRD7000001"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145654
SAPAPPL1_3.log
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145655
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -ctf E I:\PRD_Exp\ABAP\DATA\SAPAPPL1_3.STR I:\PRD_Exp\ABAP\DB\DDLORA_LRG.TPL SAPAPPL1_3.TSK ORA -l SAPAPPL1_3.log
(RTF) ########## WARNING ###########
     Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145656
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145656
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL1_3.cmd -datacodepage 4103 -l SAPAPPL1_3.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: Export without hintfile
(GSI) INFO: dbname   = "PRD20090418030425                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "PRDSAP                                                          "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PRDSAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 23 Step 10)"
(GSI) INFO: instno   = "0020500723"
EXP) ERROR: DbSlExeRead failed
rc = 103, table "QCMZPORD_LINE"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145717

Several Updates Fail all with error code U44M1I200

I have a notification that I have 12 Adobe updates to install. When I attempt to install them they fail and the error log lists the same error code for all update (U44M1I200). I am running Windows 8 and just installed the new Windows 8.1 upgrade but the updates had also failed prior to upgrading the OS.

Hi sgendel,
Please try downloading the product updates manually from : http://www.adobe.com/downloads/updates and check.

Startdb termininated with error code 12

Hi ,
I have done 10g upgrade after that am not able to startdb
When i startdb it is terminating with error code 12
But i can manually start db by startup
Please check the startdb.log
Wed Dec 22 16:07:02 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start PCP database ...
Wed Dec 22 16:07:02 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/PCP/102_64<
ORACLE_SID   is >PCP<
Wed Dec 22 16:07:02 IST 2010
check initora
Wed Dec 22 16:07:02 IST 2010
check initora
Wed Dec 22 16:07:02 IST 2010
checking V2 connect
02
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/oracle/PCP/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
VICE_NAME = PCP)))
OK (0 msec)
tnsping: V2 connect to PCP
Wed Dec 22 16:07:02 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Dec 22 16:07:02 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Wed Dec 22 16:07:03 IST 2010
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Dec 22 16:07:03 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 3204448256 bytes
Fixed Size                  2056600 bytes
Variable Size            1645645416 bytes
Database Buffers         1542029312 bytes
Redo Buffers               14716928 bytes
Database mounted.
Database opened.
bit Production
With the Partitioning, Data Mining and Real Application Testing options
Wed Dec 22 16:07:08 IST 2010
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/PCP/SYS/exe/run/startdb: Terminating with error code 12
So please suggest what to do
Thanks ,
Amar

Please check the below trans.log
PCBL_TES:pcpadm 23> more trans.log
a59y0C4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 23.12.2010 - 10:18:32
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Thu Dec 23 10:18:32 2010
     245 0.000245
4 ETW000 [dev trc     ,00000] db_con_init called
      40 0.000285
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)
     228 0.000513
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/PCP/SYS/exe/run/dbo
raslib.so' ...
4 ETW000
      28 0.000541
4 ETW000 [dev trc     ,00000] DlLoadLib() success: dlopen("/usr/sap/PCP/SYS/ex
e/run/dboraslib.so"), hdl 0
4 ETW000
   36553 0.037094
4 ETW000 [dev trc     ,00000] Library '/usr/sap/PCP/SYS/exe/run/dboraslib.so'
loaded
4 ETW000
      23 0.037117
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sa
p/PCP/SYS/exe/run/dboraslib.so
4 ETW000
      43 0.037160
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/PCP/SYS/exe/run/dboraslib.s
o' is "640.00", patchlevel (0.335)
4 ETW000
     193 0.037353
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/s
ap/PCP/SYS/exe/run/dboraslib.so
4 ETW000
      23 0.037376
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/
sap/PCP/SYS/exe/run/dboraslib.so
4 ETW000
      65 0.037441
4 ETW000 [dev trc     ,00000] New connection 0 created
      28 0.037469
4 ETW000 [dev trc     ,00000] 000: name = R/3, con_id = -000000001, state = DI
SCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000                             reco = NO , frco = NO , timeout = 000, con_
max = 255, con_opt = 255, occ = NO
4 ETW000
      29 0.037498
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)
      75 0.037573
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection
for reuse:
4 ETW000
      16 0.037589
4 ETW000 [dev trc     ,00000] 000: name = R/3, con_id = 000000000, state = DIS
CONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000                             reco = NO , frco = NO , timeout = 000, con_
max = 255, con_opt = 255, occ = NO
a59y0CdBtrans.log (29%)d@
                                     a59y0CdBtrans.log (30%)d@a59y0Ca59y0C
26 0.037615
a59y0CdBtrans.log (31%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Got ORACLE_
HOME=/oracle/PCP/102_64 from environma59y0CdBtrans.log (31%)d@a59y0Ca59y0Cent
a59y0CdBtrans.log (32%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (32%)d@a59y0Ca59y0C     2
49 0.037864
a59y0CdBtrans.log (32%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] -->oci_init
ialize (con_hdl=0)                   a59y0CdBtrans.log (33%)d@a59y0Ca59y0C
43 0.037907
a59y0CdBtrans.log (33%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] got NLS_LAN
G='AMERICAN_AMERICA.WE8DEC' from envia59y0CdBtrans.log (34%)d@a59y0Ca59y0Cronmen
t
a59y0CdBtrans.log (34%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (35%)d@a59y0Ca59y0C
18 0.037925
a59y0CdBtrans.log (35%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Client NLS
settings: AMERICAN_AMERICA.US7ASCII a59y0CdBtrans.log (36%)d@a59y0Ca59y0C    24
99 0.040424
a59y0CdBtrans.log (36%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Logon as OP
S$-user to get SAPPCP's password     a59y0CdBtrans.log (37%)d@a59y0Ca59y0C
41 0.040465
a59y0CdBtrans.log (37%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Connecting
as /@PCP on connection 0 (nls_hdl 0) a59y0CdBtrans.log (38%)d@a59y0Ca59y0C... (d
bsl 640 210610)
a59y0CdBtrans.log (38%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (39%)d@a59y0Ca59y0C
24 0.040489
a59y0CdBtrans.log (39%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Nls Charact
erSet                 NationalCharSeta59y0CdBtrans.log (40%)d@a59y0Ca59y0C
        C      EnvHp      ErrHp ErrHpBatch
a59y0CdBtrans.log (40%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (41%)d@a59y0Ca59y0C
26 0.040515
a59y0CdBtrans.log (42%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000]    0 US7ASCI
I                                    a59y0CdBtrans.log (42%)d@a59y0Ca59y0C
        1 6000000000cb2960 6000000000cba1b0 6000000000cb9b48
a59y0CdBtrans.log (43%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (43%)d@a59y0Ca59y0C
19 0.040534
a59y0CdBtrans.log (44%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Allocating
service context handle for con_hdl=0 a59y0CdBtrans.log (44%)d@a59y0Ca59y0C
55 0.040589
a59y0CdBtrans.log (45%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Allocating
server context handle                a59y0CdBtrans.log (45%)d@a59y0Ca59y0C
20 0.040609
a59y0CdBtrans.log (46%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Attaching t
o DB Server PCP (con_hdl=0,svchp=6000a59y0CdBtrans.log (46%)d@a59y0Ca59y0C000000
cb9a78,srvhp=6000000000cba888)
a59y0CdBtrans.log (47%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (47%)d@a59y0Ca59y0C
23 0.040632
a59y0CdBtrans.log (48%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Assigning s
erver context 6000000000cba888 to sera59y0CdBtrans.log (48%)d@a59y0Ca59y0Cvice c
ontext 6000000000cb9a78
a59y0CdBtrans.log (49%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (50%)d@a59y0Ca59y0C   519
26 0.092558
a59y0CdBtrans.log (50%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Allocating
user session handle                  a59y0CdBtrans.log (51%)d@
84 0.092642
a59y0CdBtrans.log (51%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Starting us
er session (con_hdl=0,svchp=600000000a59y0CdBtrans.log (52%)d@a59y0Ca59y0C0cb9a7
8,srvhp=6000000000cba888,usrhp=6000000000cc4ae8)
a59y0CdBtrans.log (52%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (53%)d@a59y0Ca59y0C
25 0.092667
a59y0CdBtrans.log (54%)d@a59y0Ca59y0C4 ETW000 [dboci.c     ,00000] *** ERROR =
> OCI-call 'OCISessionBegin' failed: a59y0CdBtrans.log (54%)d@a59y0Ca59y0Crc = 1
2705
a59y0CdBtrans.log (55%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (55%)d@a59y0Ca59y0C    26
29 0.095296
a59y0CdBtrans.log (56%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] server_deta
ch(con_hdl=0,stale=1,svrhp=6000000000a59y0CdBtrans.log (56%)d@a59y0Ca59y0Ccba888
a59y0CdBtrans.log (57%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (57%)d@a59y0Ca59y0C
18 0.095314
a59y0CdBtrans.log (58%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Detaching f
rom DB Server (con_hdl=0,svchp=600000a59y0CdBtrans.log (58%)d@a59y0Ca59y0C0000cb
9a78,srvhp=6000000000cba888)
a59y0CdBtrans.log (58%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (59%)d@a59y0Ca59y0C
19 0.095333
a59y0CdBtrans.log (60%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Deallocatin
g server context handle 6000000000cbaa59y0CdBtrans.log (60%)d@a59y0Ca59y0C888
a59y0CdBtrans.log (61%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (61%)d@a59y0Ca59y0C     3
87 0.095720
a59y0CdBtrans.log (61%)d@a59y0Ca59y0C4 ETW000 [dbsloci.    ,00000] *** ERROR =
> CONNECT failed with sql error 12705a59y0CdBtrans.log (62%)d@a59y0Ca59y0C.
a59y0CdBtrans.log (62%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (62%)d@a59y0Ca59y0C
76 0.095796
a59y0CdBtrans.log (63%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000]     set_ocic
a() -> OCI or SQL return code 12705 a59y0CdBtrans.log (63%)d@a59y0Ca59y0C
12 0.095808
a59y0CdBtrans.log (64%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Try to conn
ect with default password            a59y0CdBtrans.log (64%)d@a59y0Ca59y0C
14 0.095822
a59y0CdBtrans.log (65%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Connecting
as SAPPCP/<pwd>@PCP on connection 0 (a59y0CdBtrans.log (65%)d@a59y0Ca59y0Cnls_hd
l 0) ... (dbsl 640 210610)
a59y0CdBtrans.log (66%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (67%)d@a59y0Ca59y0C
28 0.095850
a59y0CdBtrans.log (67%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Nls Charact
erSet                 NationalCharSeta59y0CdBtrans.log (68%)d@a59y0Ca59y0C
        C      EnvHp      ErrHp ErrHpBatch
a59y0CdBtrans.log (68%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (69%)d@a59y0Ca59y0C
19 0.095869
a59y0CdBtrans.log (70%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000]    0 US7ASCI
I                                    a59y0CdBtrans.log (70%)d@a59y0Ca59y0C
        1 6000000000cb2960 6000000000cba1b0 6000000000cb9b48
a59y0CdBtrans.log (71%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (71%)d@a59y0Ca59y0C
20 0.095889
a59y0CdBtrans.log (72%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Allocating
server context handle                a59y0CdBtrans.log (72%)d@a59y0Ca59y0C
12 0.095901
a59y0CdBtrans.log (73%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Attaching t
o DB Server PCP (con_hdl=0,svchp=6000a59y0CdBtrans.log (73%)d@a59y0Ca59y0C000000
cb9a78,srvhp=6000000000cba888)
a59y0CdBtrans.log (74%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (75%)d@a59y0Ca59y0C
27 0.095928
a59y0CdBtrans.log (75%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Assigning s
erver context 6000000000cba888 to sera59y0CdBtrans.log (76%)d@a59y0Ca59y0Cvice c
ontext 6000000000cb9a78
a59y0CdBtrans.log (76%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (77%)d@a59y0Ca59y0C   443
49 0.140277
a59y0CdBtrans.log (77%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Assigning u
sername to user session 6000000000cc4a59y0CdBtrans.log (78%)d@a59y0Ca59y0Cae8
a59y0CdBtrans.log (78%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (78%)d@a59y0Ca59y0C
17 0.140294
a59y0CdBtrans.log (79%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Assigning p
assword to user session 6000000000cc4a59y0CdBtrans.log (79%)d@a59y0Ca59y0Cae8
a59y0CdBtrans.log (80%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (80%)d@a59y0Ca59y0C
66 0.140360
a59y0CdBtrans.log (81%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Starting us
er session (con_hdl=0,svchp=600000000a59y0CdBtrans.log (81%)d@a59y0Ca59y0C0cb9a7
8,srvhp=6000000000cba888,usrhp=6000000000cc4ae8)
a59y0CdBtrans.log (82%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (83%)d@a59y0Ca59y0C
53 0.140413
a59y0CdBtrans.log (83%)d@a59y0Ca59y0C4 ETW000 [dboci.c     ,00000] *** ERROR =
> OCI-call 'OCISessionBegin' failed: a59y0CdBtrans.log (84%)d@a59y0Ca59y0Crc = 1
2705
a59y0CdBtrans.log (84%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (85%)d@a59y0Ca59y0C    34
36 0.143849
a59y0CdBtrans.log (85%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] server_deta
ch(con_hdl=0,stale=1,svrhp=6000000000a59y0CdBtrans.log (86%)d@a59y0Ca59y0Ccba888
a59y0CdBtrans.log (86%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (86%)d@a59y0Ca59y0C
17 0.143866
a59y0CdBtrans.log (87%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Detaching f
rom DB Server (con_hdl=0,svchp=600000a59y0CdBtrans.log (87%)d@a59y0Ca59y0C0000cb
9a78,srvhp=6000000000cba888)
a59y0CdBtrans.log (88%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (89%)d@a59y0Ca59y0C
18 0.143884
a59y0CdBtrans.log (89%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000] Deallocatin
g server context handle 6000000000cbaa59y0CdBtrans.log (90%)d@a59y0Ca59y0C888
a59y0CdBtrans.log (90%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (90%)d@a59y0Ca59y0C     1
24 0.144008
a59y0CdBtrans.log (91%)d@a59y0Ca59y0C4 ETW000 [dbsloci.    ,00000] *** ERROR =
> CONNECT failed with sql error 12705a59y0CdBtrans.log (91%)d@a59y0Ca59y0C.
a59y0CdBtrans.log (92%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (92%)d@a59y0Ca59y0C
19 0.144027
a59y0CdBtrans.log (93%)d@a59y0Ca59y0C4 ETW000 [dev trc     ,00000]     set_ocic
a() -> OCI or SQL return code 12705 a59y0CdBtrans.log (93%)d@a59y0Ca59y0C
12 0.144039
a59y0CdBtrans.log (94%)d@a59y0Ca59y0C4 ETW000 [dblink      ,00430] ***LOG BY2=
>sql error 12705 performing CON [dbla59y0CdBtrans.log (94%)d@a59y0Ca59y0Cink#6
@ 430]
a59y0CdBtrans.log (95%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (95%)d@a59y0Ca59y0C     2
73 0.144312
a59y0CdBtrans.log (96%)d@a59y0Ca59y0C4 ETW000 [dblink      ,00430] ***LOG BY0=
>ORA-12705: Cannot access NLS data fia59y0CdBtrans.log (96%)d@a59y0Ca59y0Cles or
invalid environment specified [dblink#6 @ 430]
a59y0CdBtrans.log (97%)d@a59y0Ca59y0C4 ETW000
                                     a59y0CdBtrans.log (98%)d@a59y0Ca59y0C
19 0.144331
a59y0CdBtrans.log (98%)d@a59y0Ca59y0C2EETW169 no connect possible: "DBMS = ORACL
E                           --- dbs_oa59y0CdBtrans.log (98%)d@a59y0Ca59y0Cra_tns
name = 'PCP'"
a59y0CdBtrans.log: ENDd@a59y0Ca59y0Cd@PCBL_TES:pcpadm 24>
Please suggest

CcmSetup failed with error code 0x80004005 - windows 8.1

using sccm 2012 r2, trying to push to a windows 8.1 client i get:
<![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
<![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
<![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4539">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
<![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4541">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
<![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
<![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
<![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:4584">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
any ideas why its failing?

Hi,
I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
instruction:
http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
http://blog.configmgrftw.com/configmgr-client-startup-script/
There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

Scheduled TMS_ # TMS_TP_IMPORT background jobs fail with error code 0232

Is anyone else having the problem we've just encountered since upgrading to ECC 6.0 and CRM 2007, where once setting up the automatic import ALL background jobs, to have all of the Transport Change Requests imported into the Q-Prod testing systems automatically, fail after several successful runs?
After setting up the automatic import background job to run every 15 minutes, the first few run successfully (importing any transports as it should), then the transports stop being imported.
The background jobs continue to run, but have the following in the job log overviews CRM 2007 - "Could not start transport control program tp". R\3 ECC 6.0 - "Transport control program tp ended with error code 0232".
Only by deleting the background job and recreating it (or manually importing) from STMS, can the transports continue to be imported. Although I have noticed that there are multiple tp.exe processes started, which need to be deleted before the STMS and TMS Background jobs work again.
The:
   DB is SQL Server 2005
   disp+work is at version 7000.150.14.48855
   R3Trans is at version 7000.149.14.47907
   tp is at version 7000.144.14.39594
Any suggestions on how to cure this for good?

Thanks All
FYI
SAP first suggested the following notes: 19466, 1150361, and to add a Startup profile parameter rfc/use_gwstart = 1. Which was only partially successful.
I guess it had more to do with RFC processes hanging than it did with the tp, which was fixed in a later kernel patch level.
I've upgraded the kernel to the latest (70000.181.0.0) and my problem was fixed.
Ken

Error Message: External program terminated with exit code 2

Hi ALL
We are doing REORG tablespace in DB13 and i am getting below error message. Please help us to resolve the issue.
20100430 113234 DB6PM 000 Reorg_Tbspc:Command DB6CLP failed on server
20100430 103959 DB6PM 000 Reorg_Tbspc:Exitcode:Error
20100430 103959 DB6PM 000 Reorg_Tbspc:ERRORMESSAGE: An SQL error occured. Will print output of the command
20100430 103959 DB6PM 000 Reorg_Tbspc:External program terminated with exit code 2
20100430 103959 DB6PM 000 REASON=C call failed
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Apr 30, 2010 6:55 AM

Exitcode 2, if returned from the OS, means "No such file or directory". Note that as of SAP kernel release 7, you usually do not have DB6CLP any more. Can you check if the executable is available in the SAP exe directory ?
If running SAÜ kernel 700 or higher, I suggest to apply a recent SP level.
Malte

Launch failed with error code -2857

I've been running an app (EPSON Scan) for awhile without any significant problems. Today I check the Epson web site and they had an update for the app. So, I downloaded it, installed it, and tried to run it. Unfortunately, all I got was a couple of bounces in the Dock and nothing. I then went to the console and found the "launch failed with error code -2857" message. I've researched that as best I could and found that it is probably a problem with the application bundle. So, I opened the package, drilled down to the Mac OS folder, and double clicked on the EPSON Scan terminal command located there. Bing, a terminal window opened and the application launched and runs fine. So, the questions is, how do I resolve the CFM not finding the application correctly? I've run a pre-bind on everything but that didn't work. Seems to me like there is some config file that is not set up properly. I looked at the Info.plist file and I don't see any glaring problems. Any ideas? Epson also go a copy of this note...

First I want to say thanks for the feedback. I appreciate the support and helpful suggestions.
Second, Epson sent me an answer of sorts...they provided detailed instructions on uninstalling the application and then told me to reinstall using the disk image from their web site (in other words, don't use their web package to "update" and existing installation). I did this and things seem to be running fine now. It's unfortunate that their update instructions don't say to do this in the first place (maybe I missed it ).
So at one level this issue is solved. Unfortunately I'm too curious and wanted to know why the error happend in the first place. As a software developer myself (mainframe and midrange server based) I hate the "delete and reinstall" answer as it does nothing to really identify and solve the real problem. But I do also appreciate the idea of "just get it fixed fast" so that's what I did.
Anyway, I will now spend some time learning about Launch Services to see if I can get a more specific understanding of what happened.
Thanks again for the help.
24" iMac, 2GB Memory, etc Mac OS X (10.4.8) 20" iMac, two MacBooks, one Dual Core Mac Mini

SCCM2012 - CcmSetup failed with error code 0x80190191

I can't get client push working. Getting these errors:
CcmSetup failed with error code 0x80190191
Failed to download files through BITS. Error: 0x80190191, Description HTTP status 401: The requested resource requires user authentication.
, Context: The error occurred while the remote file was being processed.
I still have SCCM 2007 running with existing boundaries as I am trying to migrate. Is that the problem? I found an article similar from SMS 2003 to SCCM 2007 so I'm not sure if it applies.
Site servers are 2008 R2
GPO startup script is working.
Ideas? Thanks!

I just enabled Windows Authentication in IIS... Let's see what happens. I'm frustrated as this was working about a month ago when I tested it to a limited group.
Didn't work. I restarted the default web site. Restarted server too. Enable basic authentication?
I found similar issues regarding bits authentication and WSUS but nothing seems to help yet.
Also, prior to the errors I'm getting these warning which are actually inaccurate...
File 'C:\Windows\ccmsetup\vcredist_x86.exe' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\MicrosoftPolicyPlatformSetup.msi' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\SCEPInstall.exe' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)
File 'C:\Windows\ccmsetup\client.msi' doesn't exist. ccmsetup 6/24/2014 10:23:14 AM 19028 (0x4A54)

CCMSetup failed with error code 0xc0000142 on newly imaged machines

I've run into some curious errors when installing clients on newly imaged machines. After machines are deployed and joined to the domain, we run a Startup Script from AD that looks for the existence of the client and if not installs it.
The newly imaged machines all display these errors in ccmsetup.log
Installing file 'C:\windows\ccmsetup\vcredist_x86.exe' with options '/q /norestart /c:"msiexec /i vc_red.msi /qn REBOOT=ReallySuppress" /msioptions "REBOOT=ReallySuppress"'.
File 'C:\windows\ccmsetup\vcredist_x86.exe' returned failure exit code 3221225794. Fail the installation.
InstallFromManifest failed 0xc0000142
A Fallback Status Point has not been specified. Message with STATEID='311' will not be sent.
Deleted file C:\windows\ccmsetup\ccmsetup.xml
CcmSetup failed with error code 0xc0000142
If I reboot the systems one more time after these failures, the setup continues and succeeds in every case. Has anyone run into this before?
Orange County District Attorney

Does the machine have a pending reboot before installing the client?
Edit: just to add you could enable verbose logging on a freshly imaged machine.
Then look the the windows installer log file for the re distributable that fails to install.
If you search for "return value 3" in the log file, just above should be the reason it fails.
You can enable verbose logging for all MSI files with
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer]
"Logging"="voicewarmup"
vcredist_x86.exe always has 1 or 2 MSI's embedded depending on which redist it is.
The log should be in Windows\Temp if running under the system account or %appdata% for the account that's running the script.

Server https-WEB: CORE0125 The server terminated abnormally with error code

"Server https-WEB: CORE0125 The server terminated abnormally with error code 0, An attempt will be made to restart it. "
This happens every time I reboot the server or logoff. It has no ill effect on the server itself except generating these event log errors I am using Sun One 6.1 SP 1 on a wondows 2003 server. I have to resolve this beofore I can go any furthur in my project. Any help? This error comes up for both the web servive and the admin service.

Thanks to a post I just discovered, I have solved this problem.
The JVM within Sun Web Server is accepting kill signals from Windows when users logoff. When the JVM dies, apparently the web server service just dies as well. It's a long story and I don't really care to understand it fully.
You can refer to the thread I found for the solution of passing the JVM a startup option to ignore these signals.
http://swforum.sun.com/jive/thread.jspa?forumID=16&threadID=23382
Or, you can just disable the JVM completely as I did. Though there is a checkbox for this for user-defined servers under the Java tab. I couldn't find where to do this for the admin server itself, so I commented out the line in magnus.conf that loads j2ee-plugin.dll.
We'll see if this causes any other problems, but so far so good.

DB Startup failed;terminating with error code 12

Similar Messages

Maybe you are looking for