Server https-WEB: CORE0125 The server terminated abnormally with error code

"Server https-WEB: CORE0125 The server terminated abnormally with error code 0, An attempt will be made to restart it. "
This happens every time I reboot the server or logoff. It has no ill effect on the server itself except generating these event log errors I am using Sun One 6.1 SP 1 on a wondows 2003 server. I have to resolve this beofore I can go any furthur in my project. Any help? This error comes up for both the web servive and the admin service.

Thanks to a post I just discovered, I have solved this problem.
The JVM within Sun Web Server is accepting kill signals from Windows when users logoff. When the JVM dies, apparently the web server service just dies as well. It's a long story and I don't really care to understand it fully.
You can refer to the thread I found for the solution of passing the JVM a startup option to ignore these signals.
http://swforum.sun.com/jive/thread.jspa?forumID=16&threadID=23382
Or, you can just disable the JVM completely as I did. Though there is a checkbox for this for user-defined servers under the Java tab. I couldn't find where to do this for the admin server itself, so I commented out the line in magnus.conf that loads j2ee-plugin.dll.
We'll see if this causes any other problems, but so far so good.

Similar Messages

I am trying to install CS6 Design and Web Premium trial and it fails with error code 20

I am trying to install CS6 Design and Web Premium trial and it fails with error code 20

Re-extract or copy the contents of the installer. Let us know if this helps.
See http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continues

Yes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Windows Server 2012R2 fails to get update from WSUS with error code 80072ee6

Hi all,
I've deployed WSUS role on a Windows Server 2012R2 machine. WSUS listen on port 8530. Now I'm trying a test server (this machine runs WIndows Server 2012R2 too). I've configured a GPO but when I try to check for updates I get the errore in the subject.
I've checked windowsupdate.log and theese are the settings of the client:
AIR Mode is disabled
2014-02-05 12:59:00:357
776 fe0
AU # Policy Driven Provider: http://MyWSUS.MyDomain.local:8530
2014-02-05 12:59:00:357
776 fe0
AU # Detection frequency: 22
2014-02-05 12:59:00:357
776 fe0
AU # Target group: CSM Servers
2014-02-05 12:59:00:357
776 fe0
AU # Approval type: Pre-install notify (Policy)
2014-02-05 12:59:00:357
776 fe0
AU # Auto-install minor updates: No (User preference)
2014-02-05 12:59:00:357
776 fe0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
I confirm that from the test server I can telnet to my wsus server on TCP port 8530

Hi,
This issue occurs if the URL under the Group Policy setting 'Specify intranet Microsoft update service location' is invalid.
You receive a "80072EE6" error code when you download an update from Windows Server Update Services in Windows 7-based or Windows Server 2008 R2-based
computer
http://support.microsoft.com/kb/2724184
Make sure that the URL is correct and the name can be resolved.
Hope this helps.

Problem in sending HTTP request to the server.

Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
     <echo>basedir ${basedir}</echo>
     <property environment="env"/>
<echo>current folder ${basedir}</echo>
     <property file="${basedir}/build.properties"/>
     <taskdef resource="net/sf/antcontrib/antlib.xml">
     <classpath>
          <pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
     </classpath>
     </taskdef>
     <target name="init">
          <tstamp>
               <format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
          </tstamp>
          <property name="build.log.dir" location="${basedir}/buildlogs"/>
          <mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
          <record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
          <echo message="Build logged to ${build.log.filename}"/>
     </target>
     <target name="deployAll" depends="init">
     <echo>Deploy for environment ${deployment.plan.environment}</echo>
     <antcall target="deployAllComposites"/>
</target>

     <target name="deployAllComposites" depends="init">
     <foreach target="deployComposites" param="Files">
          <fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
     </foreach>
     </target>
     <target name="deployComposites" depends="init">
     <basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
          <if>
               <equals arg1="${deployAction}" arg2="deploy" />
               <then>
                    <echo message="Deploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="false"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </then>
               <else>
                    <echo message="ReDeploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="true"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </else>
          </if>
</target>
</project>
please help....

Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal

The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC)                   0x1BC0 SharePoint Server Search      Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588)                   0x1DE4 SharePoint Server Search      Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC)                     0x1060 SharePoint Server Search      HTTP Protocol
Handler         du4i                    0x29E4 SharePoint Server Search      HTTP
Protocol Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x29E4 SharePoint Server Search      HTTP Protocol
Handler         du54 High    CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x130C SharePoint Server Search      Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x2948 SharePoint Server Search      Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvg0 High    STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
en0e High    CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dv3p High    CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb1 High    CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb2 High    CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil Loka

Hi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
          Ping <servername>
      2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

'Services.exe Terminated Unexpectedly with status code 128' on SAP server

get message 'Services.exe Terminated Unexpectedly with status code 128' on SAP Server when start windows 2000. & SAP server shut down

Hi,
Please check the link below.
http://support.microsoft.com/kb/318447
Rgds,
Suman

For server Eagle-PROD-Instance, the Node Manager associated with machine

I have a wlst script that creates a domain and a managed server. I associate the server with a machine that's attached to a node manager. It creates the managed server fine but when I try and start it I get this error
For server Eagle-PROD-Instance, the Node Manager associated with machine Eagle-Machine is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
The machine is associated with the Node Manager and the NM is running. I can start the managed server from the command line, but not from the admin console
This is the script, am I missing something?
Thanks
name: createManagedServer.py
description: This script create the weblogic domain, and executes each weblogic queue module
subfile. it reads a property file : weblogic_wlst.properties for server domain information
author     : mike reynolds - edifecs 2011
created     : April 8th 2011
import sys
from java.lang import System
from java.util import Properties
from java.io import FileInputStream
from java.io import File
from weblogic.management.security.authentication import UserEditorMBean
from weblogic.management.security.authentication import GroupEditorMBean
from weblogic.management.security.authentication import UserPasswordEditorMBean
# Loads the contents a properties file into a java.util.Properties
# configPropFile = "weblogic_wlst.properties"
def loadPropertiesFromFile(configPropFile):
     configProps = Properties()
     propInputStream = FileInputStream(configPropFile)
     configProps.load(propInputStream)
     propInputStream.close()
     return configProps
def getProperties():
     importConfigFile = sys.argv[1]
     print importConfigFile
     domainProps = loadPropertiesFromFile(importConfigFile)
     properties = Properties()
     input = FileInputStream(importConfigFile)
     properties.load(input)
     input.close()
     return properties
def create_users(username, password, description):
# create admin user
cmo.getFileRealms()
try:
userObject=cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
userObject.createUser(username,password,description)
print "Created user " + username + "successfully"
except:
print "check to see if user " + username + " exists "
def add_user_to_group(username):
print "Adding a user to group ..."
cmo.getFileRealms()
try:
userObject2 = cmo.getSecurityConfiguration().getDefaultRealm().lookupAuthenticationProvider("DefaultAuthenticator")
userObject2.addMemberToGroup('Administrators',username)
print "Done adding user " + username
except:
print "check to see if user " + username + " is already in group "
def connect_server(user,pw,url):
          connect(user,pw,url)
def create_machine():
try:
print 'Creating machine' + machine
# cd('/')
# create(machine, 'Machine')
mach = cmo.createUnixMachine(machine)
mach.setPostBindUIDEnabled(true)
mach.setPostBindUID('oracle')
mach.setPostBindGIDEnabled(true)
mach.setPostBindGID('oracle')
mach.getNodeManager().setNMType('ssl')
except:
     print "machine exists"
def build_domain():
### Read Basic Template
WL_HOME = "C:/Oracle/Middleware/wlserver_10.3"
readTemplate(WL_HOME+"/common/templates/domains/wls.jar")
template=WL_HOME+"/common/templates/domains/wls.jar"
cd('Servers/AdminServer')
set('ListenAddress', adminServerAddress)
set('ListenPort', int(adminServerPort))
cd('/')
cd('/Security/base_domain/User/weblogic')
cmo.setPassword('w3bl0g1c')
### Write Domain
setOption('OverwriteDomain', 'true')
print "writing domain " + domainDir + domainName
writeDomain(domainDir+'/'+domainName)
closeTemplate()
create_machine()
arg = "Arguments=\" -server -Xms256m -Xmx768m -XX:MaxPermSize=256m -da\""
prps = makePropertiesObject (arg)
domain = domainDir + domainName
try:
     #startNodeManager()
#nmConnect('weblogic', 'w3bl0g1c', host, 5556, 'AdminServer', domain, 'ssl')
# nmStart('AdminServer')
startServer('AdminServer', domainName, url, adminUser, adminPassword, domainDir, 'true')
except:
print "could not connect to Node Manager"
def create_server():
# get server instance properties
name = properties.getProperty("serverName")
domain = properties.getProperty("domainName")
port = properties.getProperty("listenPort")
address = properties.getProperty("listenAddress")
servermb=getMBean("Servers/" + name)
machine = properties.getProperty("machineName")
nodePort = properties.getProperty("nodeManagerPort")
domainDir = properties.getProperty("domainDir")
if servermb is None:
          startEdit()
          cd('/')
          cmo.createServer(name)
          cd('/Servers/'+ name)
          cmo.setListenAddress(address)
          cmo.setListenPort(int(port))
          cd('/')
          cmo.createMachine(machine)
          cd('/Machines/' + machine + '/NodeManager/' + machine )
          cmo.setNMType('Plain')
          cmo.setListenAddress(address)
          cmo.setListenPort(int(nodePort))
          cmo.setDebugEnabled(false)
          cd('/Servers/' + name)
          cmo.setListenPortEnabled(true)
          cmo.setJavaCompiler('javac')
          cmo.setClientCertProxyEnabled(false)
          cmo.setMachine(getMBean('/Machines/' + machine ))
          cmo.setCluster(None)
          cd('/Servers/' + name + '/SSL/' + name)
          cd('/Servers/' + name + '/ServerDiagnosticConfig/' + name)
          cmo.setWLDFDiagnosticVolume('Low')
          cd('/Servers/' + name)
          cmo.setCluster(None)
          cd('/Servers/' + name + '/SSL/' + name)
          cmo.setEnabled(false)
### Executable Script
### CreateDomain.py
### Define constants
WL_HOME = "C:/Oracle/Middleware/wlserver_10.3"
print "Starting the script ..."
print "Getting properties ... "
properties = getProperties()
adminServerAddress = properties.getProperty("adminServerAddress")
adminServerPort = properties.getProperty("adminServerPort")
adminUser = properties.getProperty("adminUser")
adminPassword = properties.getProperty("adminPassword")
edifecsUser = properties.getProperty("edifecsUser")
edifecsPassword = properties.getProperty("edifecsPassword")
host = properties.getProperty("host")
domainDir = properties.getProperty("domainDir")
domainName = properties.getProperty("domainName")
user = properties.getProperty("username")
pw = properties.getProperty("passwd")
url = properties.getProperty("adminURL")
machine = properties.getProperty("machineName")
print "Building the domain..."
build_domain()
print "Connecting to server"
connect_server(adminUser, adminPassword, url)
edit()
startEdit()
# create managed server
# create_machine()
create_server()
print "Creating users"
# starting configuration tree
serverConfig()
create_users(adminUser, adminPassword, "Administrator")
add_user_to_group(adminUser)
create_users(edifecsUser, edifecsPassword,"Administrator")
add_user_to_group(edifecsUser)
# have to restart edit to save config
edit()
startEdit()
# nmKill('AdminServer')
print "saving configuration"
try:
     save()
     activate(block="true")
     print "script returns SUCCESS"
     print "admin server is running"
     print "starting server " + name
     startServer(domainName, name ,url,adminUser, adminPassword, domainDir,'true')
except:
     print "failed to save server"
     dumpStack()

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

JCO.SERVER could not find the server function

Hi,
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
Please clarify.
Thanks,
Srinivasa

Thanks for the reply,
Yes RFC is in the Sender side.
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST(XI system name)
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST(XI system name)
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
These is what I gave,

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?

Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-(

The negotiation with the VPN server failed. Verify the server address and try reconnecting

Hi folks,
I am unable to connect VPN, While connecting error occurred. Can anyone advice how to solve this issue.
"The negotiation with the VPN server failed. Verify the server address and try reconnecting"
Thanks
Vinoth

This might help, at least from Harald's post onwards.

I cannot connect to my game center account October 31, 2013. It's said that "Could not connect to game center server"... is the Server down? could it be fixed quickly

I cannot connect to my game center account October 31, 2013. It's said that "Could not connect to game center server"... is the Server down? could it be fixed quickly I play Clash of Clan and I really upset when this problem happen @@!

This happened to me as well. **Warning: The following steps will remove all network passwords from your phone and you will have to re-input them. Unfortunately, this is unavoidable**
To resolve, I went to Settings > General > Reset > Reset Network Settings and accept the Reset Network Settings option.
Afterwards, I was able to log into the Game Center without a problem.
Cheers.

The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255

Hello All
We have a server 2008 R2 HyperV server and during the last few months it started to reboot randomly.
Initially we thought its related to the issue fixed by the following hotfix so we applied it but even with the hotfix it still keeps rebooting.
http://support.microsoft.com/kb/2732595
Unlike what's mentioned in the hotfix , the faulting module is not "ntdll.dll" but "msvcrt.dll".Also came up with the following indication the reboots could be related to KB2871997 but that update is not installed
on this system.
Following are the events from system log.
Log Name:      System
Source:        LsaSrv
Date:          2/9/2015 11:58:12 PM
Event ID:      5000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HV2008-Host
Description:
The security package Kerberos generated an exception. The exception information is the data.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LsaSrv" Guid="{199FE037-2B82-40A9-82AC-E1D46C792B99}" />
    <EventID>5000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:12.415529200Z" />
    <EventRecordID>8091130</EventRecordID>
    <Correlation />
    <Execution ProcessID="736" ThreadID="5888" />
    <Channel>System</Channel>
    <Computer>HV2008-Host</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Package">Kerberos</Data>
    <Binary>050000C00000000000000000000000001111F6FEFE070000020000000000000000000000000000008EEB1802000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Log Name:      System
Source:        USER32
Date:          2/9/2015 11:58:24 PM
Event ID:      1074
Task Category: None
Level:         Information
Keywords:      Classic
User:          SYSTEM
Computer:      HV2008-Host
Description:
The process wininit.exe has initiated the restart of computer HV2008-HOST on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="USER32" />
    <EventID Qualifiers="32768">1074</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:24.000000000Z" />
    <EventRecordID>8091132</EventRecordID>
    <Channel>System</Channel>
    <Computer>HV2008-Host</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>wininit.exe</Data>
    <Data>HV2008-HOST</Data>
    <Data>No title for this reason could be found</Data>
    <Data>0x50006</Data>
    <Data>restart</Data>
    <Data>The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.</Data>
    <Data>
    </Data>
    <Binary>06000500000000000000000000000000000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
Following are the events from Application logs.
Log Name:      Application
Source:        Application Error
Date:          2/9/2015 11:58:14 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      HV2008-Host
Description:
Faulting application name: lsass.exe, version: 6.1.7601.22653, time stamp: 0x534893ed
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x0000000000001111
Faulting process id: 0x2e0
Faulting application start time: 0x01d03c91dbe5854f
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:14.000000000Z" />
    <EventRecordID>267648</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV2008-Host</Computer>
    <Security />
</System>
<EventData>
    <Data>lsass.exe</Data>
    <Data>6.1.7601.22653</Data>
    <Data>534893ed</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeb033f</Data>
    <Data>c0000005</Data>
    <Data>0000000000001111</Data>
    <Data>2e0</Data>
    <Data>01d03c91dbe5854f</Data>
    <Data>C:\Windows\system32\lsass.exe</Data>
    <Data>C:\Windows\system32\msvcrt.dll</Data>
    <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Windows Error Reporting
Date:          2/9/2015 11:58:23 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:23.000000000Z" />
    <EventRecordID>267650</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV2008-Host</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lsass.exe</Data>
    <Data>6.1.7601.22653</Data>
    <Data>534893ed</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeb033f</Data>
    <Data>c0000005</Data>
    <Data>0000000000001111</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
    <Data>0</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Windows Error Reporting
Date:          2/9/2015 11:58:22 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      HV2008-Host
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lsass.exe
P2: 6.1.7601.22653
P3: 534893ed
P4: msvcrt.dll
P5: 7.0.7601.17744
P6: 4eeb033f
P7: c0000005
P8: 0000000000001111
P9:
P10:
Attached files:
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871
Analysis symbol:
Rechecking for solution: 0
Report Id: 6af0ff3d-b0e1-11e4-83ca-0026b9340d61
Report Status: 4
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T04:58:22.000000000Z" />
    <EventRecordID>267649</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV2008-Host</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lsass.exe</Data>
    <Data>6.1.7601.22653</Data>
    <Data>534893ed</Data>
    <Data>msvcrt.dll</Data>
    <Data>7.0.7601.17744</Data>
    <Data>4eeb033f</Data>
    <Data>c0000005</Data>
    <Data>0000000000001111</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Windows\Temp\WER5001.tmp.appcompat.txt
C:\Windows\Temp\WER535C.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER53DA.tmp.hdmp
C:\Windows\Temp\WER6690.tmp.mdmp</Data>
    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_3c1aa5eeba75bf26fcebc4f54e714efe7b5162a2_cab_20a56871</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>6af0ff3d-b0e1-11e4-83ca-0026b9340d61</Data>
    <Data>4</Data>
</EventData>
</Event>
Would really appreciate if someone can point us to the correct direction on how to get this issue sorted.
Regards,
Dhanushka

Hi Sir,
Please try the following items:
1. if ther is anti-virus installed , please uninstall it temporarily
2. run " sfc /scannow "
3. keep windows up-to-date
4. if you updated some hardware driver please roll it back
5. if the issue persists , please use windows installation media to perform inplace-upgrade for the system
Also please refer to reinstall C++ runtime within the similar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/bf69eeff-24c4-499f-b280-b6a3098f4f9f/problem-with-msvcrtdll-version-70760117744?forum=w7itprogeneral
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Server https-WEB: CORE0125 The server terminated abnormally with error code

Similar Messages

Maybe you are looking for