DB02 = Missing Tables and Indexes = Unknown objects in ABAP Dictionary = DB views
Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
Carlos
Hello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB
Similar Messages
-
Hi SAP Gurus,
I noticed on our SAP business warehouse (BW) system (NetWeaver 7.0 based on AIX/Oracle 11g) in transaction DB02 => Diagnostics => Missing Tables and Indexes under Secondary indexes, 26 indexes, in package $tmp:
The indexes are defined, but they don't have been created on the database.
When I try to create them via the database tool, I am getting the warning:
Does the warning raise up, because they where defined in the $tmp package?
I was looking in SAP notes for a solution for this "warning" concerning the /BIC/F-Indexes but I didn't found yet anything helpful ...
Thanks for your help and ideas ...
Best regards
CarlosHi Carlos,
These are secondary indexes created during process chains in BI to improvise performance.
You may refer below SCN blogs on creation of these indices in BI.
Secondary Index - Improving DSO insert/read performance
How to Create Secondary Index on DSO in SAP BW
Hope this helps.
Regards,
Deepak Kori -
Unknown object in ABAP dictionary- TADIR^SRCDEP
Hi,
I found an entry in unknown object in ABAP dictionary while monitoring the system.
This this the location I found this entry DBACOCKPIT-> Diagnostics-> missing table and indexes-> unknown object in ABAP dictionary.
Could you please help to figure out how to solve this?
Thanks in advance.
Regards,
PradeepHello,
You can ignore the index TADIR^SRCDEP in transaction DB2.
The installation creates the index TADIR^SRCDEP to avoid hanging
situations on the database while executing reports. When the
installation is finished you can delete this index.
Drop the index TADIR^SRCDEP on the database:
o start SQL Server Management Studio
o connect to your SQL Server
o open a query window and execute the following command (replace
SID by the uppercase system name, sid by the lowercase system
name):
drop index [TADIR^SRCDEP] on SID.sid.TADIR
Best regards
Clas -
Missing Tables and Indexes in 3.5
Hi,
when i am executing Tcode DB02 then under Missing Tables and Indexes i find 35 Indexes as not created.
can anybody tell me what does that signify. is this a issue if so how to fix it.
Indexes not created
ADCP-I04
ADCP-I03
ADCP-I02
ADCP-I01
ADCPS-I01
ADCPS-I02
ADCPS-I03
ADCPS-I04
ADRC-I14
ADRC-I11
ADRC-I05
ADRC-I02
ADRC-G
ADRP-I01
ADRP-I02
ADRP-I03
ADRP-I04
ADRP-I07
ADRP-I08
ADRP-I09
ADRV-I01
BUT000-PER
CDHDR-001
CDHDR-002
CRMD_ORDERADM_I-PKI
CRMD_ORDERADM_I-DES
ISSUE_RELATION-001
NAST-ADQ
RMPS_T_RESUB-RAG
RMPS_T_RESUB-RCU
SSPICSPRHD-S02
SSPICSTRHEAD-S01
SSPICSTRPL-FLD
STXH-TDN
SWBRULECOM-RSY
RakeshHi Rakesh,
First thing this is not an issue but an information that says that these indexes are not be created in the System.
This option Indexes not created is an SAP table maintained from Dev to Prod just to indicate that these indexes cannot be created.
That's the reason why u have a green mark beside them and this will make clear for you that this is not an issue.
Hope it helps!!!!
Thanks & Regards,
Neelesh Jain. -
Missing Tables and Indexes greyed out in DBACOCKPIT
Hi All,
I use Solution Manager 7.01 with MS SQL Server 2008 DB.
I want to monitor with DBACOCKPIT a MS SQL Server 2005 DataBase of a SAP BPC 5.1.
I connected the DB but in DBACOCKPIT some functionality are greyed out.
I want to use in Diagnostics section the "MISSING TABLES AND INDEXES" function but this command is greyed out.
Is it possible to use this function?
Please, help me!
Regards,
AlessandroHi,
Gray color means that screen is disabled for any reason (authorization, SQL Server release, monitoring remote, etc).
I believe, those items cannot be monitored unless these limitations are sorted out.
Please refer to the Document "The SAP DBA Cockpit for Microsoft SQL Server" in SDN.
You can get the status about the restriction in the bottom of dbacockpit screen.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Sep 16, 2009 1:03 PM -
Hi all,
we have checked "missing table and indexs" status with DBACOCKPIT and there it show 362 Indexes are not created.
all are the standard table indexes.
we have updated the indexes and statistics with BRCONNECT also.and its complited successfully.after this also "it show 362 Indexes are not created". we are using SOLARIS OS and oracle database.
Can anybody help me out how to rebuilt the missing indexes .....plz mention the steps.
Thanks,
Rableen khuranaHi,
Refer to the note and lins on how to fix it
Note 1320008 - DBA Cockpit: Selection in "Missing Tables and Indexes"
http://wiki.sdn.sap.com/wiki/display/TechTSG/(DB)IndexReportedasMissing
http://help.sap.com/saphelp_nwpi711/helpdata/en/33/5b277b8b0745b8b60e67ca04c77ebb/content.htm
Thanks,
Arjun -
Unknown object in ABAP Dictionary
Hello
In st04 in "Missing tables and indexes" are many indexes have reported unknown "Unknown object in ABAP Dictionary".
This is because indexex are created directly in DB. Is there a way to solve this problem?
We have db : oracle 10.2.04 and sap SAP ECC 6.0 (Pkg. lvl. 254).Hi,
In ST04, If you click Missing tables and indexes then next to "Unknown object in ABAP Dictionary" there is a information button which says as below, kindly go through it which could help you.
" Here objects which were found on the database but which are not defined
in the ABAP Dictionary are displayed. These objects are displayed for
information only, since they generally do not belong to the SAP System.
These objects normally do not cause problems.
The objects are generally created directly with database means. If the
author is unknown, the purpose of the table can sometimes be determined
using the display function. Any data can only be displayed with database
means since the SAP tools for displaying data are based on the
definition in the ABAP Dictionary.
In some cases, such objects were already overlooked by SAP at delivery
or occurred during upgrading. To check this, search in OSS using the
keyword DB02 and the Release level for a corresponding Note.
Customer tables, views and indexes should always be created with the
ABAP Dictionary. This is the only way to ensure that the objects are
recognized by the SAP System and that for example collisions can be
avoided during an upgrade."
Regards,
Sharath -
Unknown Objects in ABAP Dictionary
Hello Everyone,
I am getting a few objects that come up when running the Missing tables and Indexes command in the DBCOCKPIT. Under Unknown Objects in ABAP Dictionary I have the following objects appear:
sap_tabstats
V_MSSDWDLLS
sap_tabstats_V_newest
sap_tabstats_V_oldest
I cannot find anything referencing how to correct this issue. Can anyone be of any assistance? I would greatly appreciate it. Thanks!Hi:
for sap_tabstats, sap_tabstats_V_oldest and sap_tabstats_V_newest you can find in note 1027512 :
4. IMPORTANT CHANGES IN DATA COLLECTION AND HISTORY
o Applying SP12 on a SQL Server system will introduce a new method
for collecting database and table size histories. This new
methode relies on t-sql objects sap_tabstats,
sap_tabstats_V_newest, and sap_tabstats_V_oldest. These items
aren't in the data dictionary and should be ignored in any
discrepancy reports. They are added to an exception table for
SP13.
For V_MSSDWDLLS you should read note 1020865. The view can be ignored.
Regards
Clas -
BW - Unknown objects in ABAP Dictionary - DB Tables
Hello gurus,
As a result of the consistency check in DB02 transaction, our BW System is showing a high number of "DB Tables" and "DB Tables withouth unique index" as unknown objects in the ABAP dictionary.
Is there any way to solve these consistency issues detected in DB02?
Thanks
RegardsHi Dibya,
I checked the SAP note 33814 and it tooke me to the SAP note 449891 - Temporary database objects in BW 3.X
According to the recommendations, I executed the report SAP_UPDATE_DBDIFF, and I got as result 579 secondary indexes missing in the DB from the and still the 5 DB Tables unknown in the ABAP dictionary and 2 DB Tables withouth unique index,
I executed the report SAP_INFOCUBE_INDEXES_REPAIR in order to try to repair the secondary missing indexes that were shwon but withouth getting any results.
Do you have any recommendation to solve this situation? In the original scenario the DB02 transaction wasn't reporting any missing index.
Thanks and regards, -
DB02 view is empty on Table and Index analyses DB2 9.7 after system copy
Dear All,
I did the Quality refresh by System copy export/import method. ECC6 on HP-UX DB29.7.
After Import Runstats status n Db02 for Table and Index analysis was empty and all value showing '-1'. Eventhough
a) all standard backgrnd job scheduled in sm36
b) Automatic runstats are enabled in db2 parameters
c) Reorgchk all scheduled periodically from db13 and already ran twice.
4) 'reorgchk update statistics on table all' was also ran on db2 level.
but Run stats staus in db02 was not getting updated. Its empty.
Please suggest.
Regards
VinayHi Deepak,
Yes, that is possible (but only offline backup). But for the new features like reclaimable tablespace (to lower the high watermark)
it's better to export/import with systemcopy.
Also with systemcopy you can use index compression.
After backup and restore you can have also reclaimable tablespace, but you have to create new tablespaces
and then work with db6conv and online table move to move one tablespace online to the new one.
Best regards,
Joachim -
Getting error in DB02 after checking Consistency check Unknown objects in A
Dear All,
I have getting error in DB02 after checking Consistency check.
Please find the details.
I have queries.
How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.
Missing in R/3 DDIC 1 11
Consistency check of 07.04.2009 10:14:24
-- Objects missing in the database
Primary indexes 0
Secondary indexes 0
Tables 0
Views 0
-- Unknown objects in ABAP Dictionary
| |-- DB tables 1
|-- DB indexes 11
|-- DB views 12
-- DB tables without unique index 1
-- Optional indexes
Too many indexes created 0
-- Indexes not created 145
Regards,Hi
Check this may help you
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
Regards
Uday -
BW DB13 Tables and indexes missing
hi, everyone,
our team find a strangethings in DB02 about the growth of table space, there is even no any growth, and it keeps about two months. and then we found that in tables and indexes all table about BW like *ODSD, *FACTD, *DIMD are missing!
I only find DB13C appear the error as" REOGR CHK for All Tables" at the same time .
please tell me why I can't find BW tables ? is there any relations between tables missing and job calendar?
our level is 701, and database is DB6.It's a fool questions, i found the reason is so easy^^
-
Reorganization of tablespaces, tables and indexes.
Hello Experts,
What is the concept of tablespaces, statistics , tables and indexes in SAP/Oracle ? Where are they used and what are they meant for ?
Wt is the concept and procedure of performing Reorganization of tablespaces, tables and indexes ? why do we need it for ?
Requested to revertb at earliest as its urgent . points guaranteed .
Regards,
SomyaHello Somya,
Probably difficult to explain entire information in this thread. But you definately get good information in the following link
http://help.sap.com/saphelp_47x200/helpdata/en/0d/d2fafd4a0c11d182b80000e829fbfe/frameset.htm
Please drill down through menus, and you will be able to get good information.
Also you can check the following SAP notes
666061 FAQ: Database objects, segments and extents
912620 FAQ: Oracle indexes
588668 FAQ: Database statistics
592393 FAQ: Oracle
541538 FAQ: Reorganizations
Regards,
Madhukar -
Generate the tablespace clause for tables and indexes
How can I make Designer generate the tablespace clause for the create table and create index statements?
I assigned tables and indexes to Tablespaces objects in designer but they don't seem to have any effect on the generator.
I am using the latest version of Oracle Designer.
Thanks
Message was edited by:
bikercGuess I am not real clear what you want.
In the DB admin tab you will need to create the tablespace with the data file.
Then you need to assign the table space to the table.
You will need to generate from the DB Admin tab.
Hope this helps.
Michael -
Hi,
how to know if for a table we should rebuild table and index ?
Many thanks.Safi, I would be less sure than that. There were many many very long threads in database general forum about that subject. If you observed that fact once, that is not very often the case.
@OP,
Assuming the question was not about performance, but more on AppDesigner side (because of rebuild table), what I can say is :
1. Peoplesoft store all the storage definition for all the objects in its own metamodel tables
2. when you are changing field definition (column's definition) or indexes definition, the new definition is stored in the Peoplesoft metamodel tables
3. On the table/index build, AppDesigner compare the Peoplesoft metamodel definition for that particular object with in the Oracle (or what ever else database you are using) definition of that same object.
4. If the defintions reported on step 3 are different, then AppDesigner will fill a file with all the (re)build statements of the objects you are rebuilding (and different).
5. Finally, you just have to run the generated script.
Of course, you can bypass the comparison by enforcing AppDesigner the (re)build the record/index in all cases, however, it is not always (do not say never) recommanded.
Now, when you have to rebuild table (or record in AppDesigner's word) or indexes ? Basically, by the previous explanation I gave above, you could understand this is when you are changing a field/table/index definition through AppDesigner.
Nicolas.
Maybe you are looking for
-
Adobe Premiere CS6 Keeps Crashing After iTunes Update!
I updated to iTunes 11, and that is only thing that I can think of that has changed on my system, and now when I try to export anything in Premiere, my whole computer freezes after getting a glitchy repeating sound to the speakers...I am forced to pu
-
My new mac mini seems stuck whilst launching for the first time - looking for bluetooth peripherals - they are a new trackpad and wireless keyboard - both in pair mode so I can't see what the issue is..Do I really need to find wired mouse and keyboar
-
BPC 10.0 Currency Conversion Scenario
Hello All, I have a specific business scenario and I'm curious if anyone has anything similar and how they got around it and/or anyone's thoughts on this. I'll try to make as much sense as I can, sorry if it's confusing! My company is a USD company,
-
TS1741 Can I connect ipad mini to PC to put itunes on it from PC?
Can I connect ipad mini to PC to put itunes on it from PC?
-
I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!