DB12 , Backup Overview details are not retrieved

Hi There
System o/s : AIX
Database : DB2
SAP System : ECC6. 0
Unable to find out Backup details overview through ST04/ DB12/DB13 .. can somebody help me plz if I am missing out with any parameters ..

Hi,
What support package level is your system on?
If you take a backup does it show in the history file but not in db12 ?
What way or you taking the backup?
you can change the alert configuration (for you needs) in the
DB6COCKPIT (ST04): Alerts -> Alert Configuration
=> mark the related line -> Edit
This way you can be alerted if no sucessfull backup was taken in the last while (you can set the duration until an alert is created)
regards,
Paul

Similar Messages

Problems with Master-Detail Form not retrieving Detail Rows

Portal 3.0.7.6.2 on NT
I am having problems with a Master-Detail Form not retrieving Detail Rows. Sometimes it retrieves all, sometimes about 50%, the majority of the time it's not retrieving any. If it never retrieved any I would suspect that the 'join' condition was wrong but that isn't the case. I didn't have this problem with a prior MD Form I created. I have tried re-creating the MD Form but I get the same problem.
Is anyone having similar problems/is this a know bug??
Any help or thoughts are appreciated.

I experienced performance problems. The simpiest MD form takes about 10 secs. to requery. I's not answer to your question, but there is more problems with this concept.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Finch ([email protected]):
Portal 3.0.7.6.2 on NT
I am having problems with a Master-Detail Form not retrieving Detail Rows. Sometimes it retrieves all, sometimes about 50%, the majority of the time it's not retrieving any. If it never retrieved any I would suspect that the 'join' condition was wrong but that isn't the case. I didn't have this problem with a prior MD Form I created. I have tried re-creating the MD Form but I get the same problem.
Is anyone having similar problems/is this a know bug??
Any help or thoughts are appreciated.<HR></BLOCKQUOTE>
null

Excise Details are not maintanied for Vendor 0000000957.

Hi,
As per our regular process we are capturing inovie with J1IEX and doing GR in MB01 now i have captured invoice in J1IEX and while making GR with MIGO i am getting error
Excise Details are not maintanied for Vendor 0000000957. , but when i am making GR with MB01 i am not getting any error.
also what configuration required to capture excise invoice and make Gr in MIGO, as capture excise invoice menu is not coming in MIGO in MIGO Exicse tab i can only see only refer excise invoice , only part1 , no exicse registration.
regards,
zafar

Hi,
Do proper setings in Logistics - General -Tax on Goods Movements -India -Basic Settings -Maintain Excise Groups - select your excise group and check settings in MIGO Settings such as EI Capture, Post EI in MIGO, Duty different at GR.
Also ensure that you have maintained excise details for Vendor and Material in J1ID.
Regards,
Vikas

The data from a table of a database are not retrieved in ADF BC Application

I have two separate ADF BC applications. Each application retrieve
the data from the same scheme of a database. Both applications work
well when I launch them under embedded OC4J. I have deployed
these applications to a standalone OC4J. When I launch one application,
the data from a database's table are retrieved. When I launch the other
application, the data from a database's table are not retrieved. Why? Please,
help me.

Any error message ?
Frank

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

Excise Details are not maintanied for Vendor: GRN error

Dear All,
We have upgraded our Ecc 6.0 system to latest application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
Please let me know if any note or object to be updated to correct this error.
Thanks
Raghavendra.

hiii
Can u tel me where exactly the excise range was missing ??
Because if excise range is missing , it won't throw this lind of error .
U have found any other???????
Thnaks
SAP-MM

Excise Details are not maintanied for Vendor, Message no. 8I565;

Hi Gurus,
We have up-graded system from 4.7 to ECC 6.0, Now encountering following error while capturing Excise at MIGO.
Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565;
Kindly suggest a solution for the above error.
Best regards
Naveen D'Souza

Hello ,
Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565
The above given error is common while MIGO while capture of excise invoice. The above written guys are correct, please check J1ID for that Vendor,
1) if after maintening also , suppose you get the above error while MIGO, then select "Only Part1" option in MIGO , and press Check Button, if error goes,
then again go back and select "Capture excise invoice", then system will not give you the above error while Capture of excise invoice in MIGO.
Please check some SAPOSS notes also.
Regards
Mahesh Naik.

Cenvat determination and vendor excise details are not checked in MIGO

Hi experts,
I have created one PO with Zero excise duty amounts (No excise duty) and following problem observed at the time of MIGO -
System doesnt check any vendor excise details (excise indicator marked as ZERO in j1ID) even without entering excise invoice No and date in MIGO system accepts the entry with ZERO excise duty amounts.
hence a fictitious part 1 No is generate by system for which no point taking part II.
Kindly suggest
Regards,
Pawan

Check SAP Note No 1282447- check vendor excise details in MIGO .
While capturing excise invoice along with the goods receipt process through
the transaction MIGO, the system does not validate the existence of the
excise details of the vendor master.
This note introduces the error 8I 565, 'Excise Details are not maintanied
for Vendor MIGO', when the vendor excise details are not maintained in
J1ID.
Raviraj.

Employee tax details are not showing up in Payslip...

Hi Experts,
in my project when we are generating payslip Tax details are not showing up in that.I have checked with RT , the amount is correctly showing in RT.How can i resolve the problem.Please advice me.
Regards,
Sai.

Hi Manoj,
Thanks for the reply.How can check weather the wagetypes are added or not addeded in PE51.If not added what should i do?
Thanks in advance.
SAI

Ipad2 contact details are not displayed

Hi guys, since a few days I have got the following problem on my iPad 2, OS 5.01, sync with iCloud. The contacts are displayed in 2 pages layout, left the alphabetical list of contacts and (usually) on the right the details of the selected contact.
The alphabetical contact list is displayed but the details are not shown. The right side only shoes the options 1) new contact 2) add to contacts 3) send contact. A new contact 1) can be entered, the name is shown on the left, the details are not shown on the right. If I choose options 2) or 3) the contact folder is closed.
The contact details, however, must be available because the email app has access to the email addresses.
In order to solve the problem I tried the following
a) deleting all contacts and importing them again. Result: the problem remains
b) restoring the ipad from the last back up on my computer. Result: the problem remains
c) deleting all contacts, switching the ipad off and on again, entering a new contact. Result: the problem remains
I am also using the ipad 1 as well as the iphone with OS 5.01 both devices working as normal.
I do hope somebody can help, thanks.
Mike

could solve the problem by using iEA's suggestion:
I've been having this problem every since I updated to iOS 5. I called Apple and they told me to restore. That didn't work, I deleteted my icloud account, that didn't work, I switched contact off in icloud that didn't work.
I did a spotlight search for a contact, and it pulled up the contact info, then I touched the top left of the screen even though it was black, and went to the groups area. Then I clicked all, and they all magicly appeared with all fields in tact, wowowowo!! Hope this works for everyone

TDS deducted details are not printing in J1INQEFILE

Dear All,
For all the vendors TDS deducted details are not printing in J1INQEFILE. I would like to get the resolution by any of your valuable inputs.
Thanks,
Saravana

Hi ,
Kindly check this Note 1003736 - J1INQEFILE:Tax rate not appearing in the output.
Hope it helps
SJ

Assessable value and the Excise details are NOT coming in MIGO

We are facing problem that assessable value and the Excise details are NOT getting populated automatically when doing MIGO in IN03 plant.We have a STO from a DC to plant. We created the outbound delivery and then captured the excise invoice using J1IJ.In migo we give the reference of this excise invoice in the excise invoice tab then the values calculated should flow in MIGO.This is not happening and user have to manually calculate the tax and put in the system.
I have followed the following steps
1. Create STO PO ME21N
2. Create outbound delivery using VL10B
3. Do the PGI using VL02N
4. Capture the exice invoice using J1IJ in depot
5. Do MIGO and give the reference of the excise invoice created

Hi,
In STO, your supplying plant is your Vendor for the receiving plant. Hence, you have to maintain the supplying plant as vendor also. Pl. check in table J1ID that the vendor data is maintained for the supplying plant.
Regards,
Prashant

My Macbook displays photographies often quite dark, so that some details are not visible at all. Is it possible that the LED-light is defective or could there be other causes?

My Macbook displays photographies often very dark, so that some details are not visible at all. Can there be a problem with the LED light?

You could turn up the brightness of your display. It's also possible the backlighting has gone bad.

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

DB12 , Backup Overview details are not retrieved

Similar Messages

Maybe you are looking for