Db13 No Detail for Brbackup and Brarchive job

Hi,
i did a whole database online & redo log backup thru db13 on my bi 7 running on oracle 10.2g.
after the job, i can see 1 arch file (....3718....dbf) in oraarch folder. The job show as finish. I can view the detail log for both brbackup and brarchive.
when i did a restore to a new server, the restore job ask for arch file 3719 that doesn't exist in the oraarch folder.
when i startup, i can see the last brbackup and brarchive, but the job show as finish with error. No detail log for both brbackup and brarchive. I check, both sapbackup and saparchive folders exist.
My question:
- why did the job show as finish with error?
- why no detail shown for brbackup and brarchive?
- why did the restore job ask for arch file that doesn't exist?
- how so that i can see the same view as in the original?
thank you.
regards,
zl

ZL,
I would suggest you to go through the sapbackup directory (on source server) for the log information. In the meantime, if you know the exact timings you may want to try for oracle time based recovery. Remember this time has to be just before 3719 dbf.
Example:
SQL> STARTUP MOUNT
SQL> RECOVER DATABASE UNTIL TIME '2009-03-21:11:00:00';
SQL> ALTER DATABASE OPEN RESETLOGS;
Hope this helps.
Manoj

Similar Messages

Question: BRBACKUP and BRARCHIVE retention time

Dear experts,
At our company we are performing backups to disk via RMAN. All good, BUT our server, which holds the backups
and the archivelogs is constantly running out of space. According to the company's policies, the retention period
is 14 days, all the backups and archivelogs older than that, can be carelessly deleted. Hence, I have the following
2 questions:
1) I found the following 2 parameter in init<SID>.sap:
# retention period in days for archive log files saved on disk
# default: 30
# cleanup_disk_archive = 30
# retention period in days for database files backed up on disk
# default: 30
# cleanup_disk_backup = 30
Are those the correct parameters ?
2) How is this functionality implemented ? Do brbackup and brarchive only overwrite backups / archivelogs older
than the value specified. Or they are searching for everything older than the retention period in the backup destination
and then purge it... ?
I am asking this question, because we have old backups before and after SAP upgrade and it would be very bad,
if those backups get purged when setting those parameter(s).
Many thanks for your answer(s)!!

Hi Reagan,
there you go, I have removed all the comments from the file to make it more compact:
backup_mode = all
restore_mode = all
backup_type = online_cons
backup_dev_type = rman_disk
backup_root_dir = <path>/sap_backup/<SID>
stage_root_dir = /oracle/<SID>/sapbackup
compress = no
compress_cmd = "compress -c $ > $"
uncompress_cmd = "uncompress -c $ > $"
compress_dir = /oracle/<SID>/sapreorg
archive_function = delete_saved
archive_copy_dir = <path>/sap_backup/<SID>/oraarch
archive_stage_dir = /oracle/<SID>/sapbackup
tape_copy_cmd = cpio
disk_copy_cmd = copy
stage_copy_cmd = rcp
pipe_copy_cmd = rsh
cpio_flags = -ovB
cpio_in_flags = -iuvB
cpio_disk_flags = -pdcu
dd_flags = "obs=64k bs=64k"
dd_in_flags = "ibs=64k bs=64k"
saveset_members = 1
rman_channels = 1
rman_filesperset = 300
_rman_sess_stmt = ("alter session set optimizer_mode=RULE")
rman_parms = "SBT_LIBRARY=/oracle/<SID>/112_64/lib/libddobk.so, ENV=(STORAGE_UNIT=SAP,BACKUP_HOST=wspo013.ages.at)"
copy_out_cmd = "dd ibs=8k obs=64k of=$"
copy_in_cmd = "dd ibs=64k obs=8k if=$"
rewind = "mt -f $ rewind"
rewind_offline = "mt -f $ offline"
tape_pos_cmd = "mt -f $ fsf $"
tape_size = 100G
exec_parallel = 0
tape_address = /dev/rmt/0mn
tape_address_rew = /dev/rmt/0m
volume_archive = (<SID>A01, <SID>A02, <SID>A03, <SID>A04, <SID>A05,
                  <SID>A06, <SID>A07, <SID>A08, <SID>A09, <SID>A10,
                  <SID>A11, <SID>A12, <SID>A13, <SID>A14, <SID>A15,
                  <SID>A16, <SID>A17, <SID>A18, <SID>A19, <SID>A20,
                  <SID>A21, <SID>A22, <SID>A23, <SID>A24, <SID>A25,
                  <SID>A26, <SID>A27, <SID>A28, <SID>A29, <SID>A30)
volume_backup = (<SID>B01, <SID>B02, <SID>B03, <SID>B04, <SID>B05,
                 <SID>B06, <SID>B07, <SID>B08, <SID>B09, <SID>B10,
                 <SID>B11, <SID>B12, <SID>B13, <SID>B14, <SID>B15,
                 <SID>B16, <SID>B17, <SID>B18, <SID>B19, <SID>B20,
                 <SID>B21, <SID>B22, <SID>B23, <SID>B24, <SID>B25,
                 <SID>B26, <SID>B27, <SID>B28, <SID>B29, <SID>B30)
expir_period = 30
tape_use_count = 100
cleanup_disk_archive = 14

A major black eye for Apple and Steve Jobs - an update on activation issues

I am at 30 hours and still waiting for activation!
I have spent over 7 hours on the phone between yesterday and today trying to get my phone activated. I have been talking to AT&T and Apple and I have wasted my day on hold. No one seems to know what the issue is and everyone keeps telling my they are sorry. I am a current AT&T customer and they deactivated my old phone immediately.
I was on the phone with Apple earlier today for over an hour and the rep had to work with AT&T and still could not correct my activation. She "promised" to call back before 7pm PDT to see if my issue was resolved and I should have known better since of course no call was received. I really was not expecting the call but it should never have been offered.
Throughout my numerous calls I was informed that this was becoming a major issue for AT&T and Apple as the day was progressing and that they had numerous people working on the problem.
Where has Apple and AT&t been in all this? Steve Jobs has been promoting the heck out of his product and now he is no where to be found. No statements addressing the issues on either of their web sites. During my last conversation with AT&T, the rep informed me that at 10:36 CDT she received an update from Apple saying that they are trying to resolve the issues and that it may take 24-48 more hours to resolve. The AT&T rep also informed me that they it AT&T was informed by Apple that the issues with activation are coming from the Apple side.
I know that this is a new product and glitches will happen. But Apple created the hype and they should have been prepared.
In the meantime, I will be charged an activation fee even though I cannot activate and I have wasted my weekend with Apple.
I have a feeling this will become a bigger story on Monday when more stories get out to the press and Mr. Jobs returns from celebrating his "succesful" launch. This is a very frustrating experience and this will probably be my last Apple purchase (I own numerous Apple items).
Good luck to everyone else.
I h

Sorry to hear about all your issues. I am about in the same boat. But, I think mines kinda worse..
Got my phone last night, got the typical Your activation requires additional time. Spoke with an AT&T rep about 4pm this afternoon. He said he would push the activation and give it up to 2 hours more.. Great! 5 hours later and nothing. So I call the 877 number, option 3 to check activation status.... Your phone is activated and you should be able to use all features.. WHAT?! I look at my phone.. I still have a globe telling me to activate iphone, connect to iTunes.. Im 45 mins on hold waiting for a rep again and im more mad then it would have been if it said it was still processing! I understand glitches, and I expected a few issues, but nothing like this..
And as i am typing i just got a customer service agent...
They've done everything they can and i need to wait, since it hasn't been 24 hours yet.. ok, now *** is that?! Im just laughing at how absurd that call was. The customer service rep didn't even understand that i was still at the activate screen, she was asking if i had a dial tone? and if i could get into mail or ipod at the bottom.. oh my.. I really hope I dont have to call AT&T support again for my life with this phone, cause its not starting out good..
Best to all.. lets hope this gets resolved soon!!

Details for payment ...not regularized yet?

I just updated my details for payment and my previous plan is not regularized yet? what do i have to do more?
i save the new content. I think that is what only needs to be done, from the looks of the information in the page...
someone please help?

Forgot to add this
- I had a monthly payment, for a year (i guess)
Payed for 3 months but them i canceled. Yesterday i updated my payment information.
i've read this:
If your payment information is updated on Creative Cloud, you don't need to do anything. Your membership will renew automatically. We will automatically renew your contract based on the current price of the offering.
However, if you've changed your credit card, or want to use another credit card, update your payment information.
I did it... but i can't teel the diference....is it done yet? i dont have a bill for this month, i don't have anything to tell me that it's done......
What did you do?

HR Report for finding details for the new hires and leavers

Dear All,
I am very new to SAP HR ABAP.
Need Help
I have to create a report which fetches all the details <Details are mentioned below>
for all the
1)     New hires
2)     Leavers
in between a time range.
<Details to be fetched :~
Title
Fax
Mobile
Nationality
Domicile
Religion
Passport
Place of issue
Issue date
Valid till
Date of Hire
Action Reason
Reporting to
Date of exit interview
Leave Date
Leaving Reason
Street
Address Line2
City
District
Region
Country
Postal Code
Communication Number
Personal ID
Date Of Last Hire
Location
Job
Payroll area
OrgLvl1
OrgLvl2
OrgLvl3
OrgLvl4
Personnel Number
Date of seniority
EEBankName
Bank account no
Bank account type
PERID
Thanks a lot !!!
Joy
Edited by: joydip majumder on Jul 11, 2008 10:46 AM

Hi joy ,
you can create ur own z-report for this requirement , for this u have to read the employee data with in the date rage for   infotype 0 (Action) for hiring and leaving dates. Other related infomation u can fetch from the related infotypes tables like PA0001 etc using simple select queries.All required fields can be dispalyed in the ALV output.
Regards
Lakhan
Edited by: lakhan on Jul 11, 2008 2:35 PM

Can someone help me synce my old G5 Motorola to my snow leopard laptop so I can use Quitktime with video screen capabilities for demo purposes and a job I have with a major website? Thanks!

Is there anyway that I can sync this Motorola G5 dual, OS 10.5.8 with my ibook OS 10.6.8 so I can use the quicktime application on the Mororola? I need to network the two computers and if someone could kindly tell me how to do this with either wifi, USB, orFirewire, I'd be very grateful. My ethernet connection is in use and I only have one and no hub. Doing this will give me the ability to work for a site that needs my expertise in recording but I have old equipment right now on the recording end. No chance to upgrade at this point as we're broke and I'm severly injured, so I am trying to find a workaround that will let me access this copmuter, with snow leapord to work with the old one with (Motorola G5 dual w/10.5.8). It means a few bucks to us if I can make it happen, and my family really need to dough. It will keep me from having to convert things to a youtube format, take the extra time involved to do that, when, instead, I could just take screen recordings instead. Unfortunately, I don't have Pro Tools on this computer or all would be fixable.
I'm really hoping that you or someone else can help me get these two macs synced so I can do this. DO you think you can help me? Thanks so much! Scotty Goldberg

Thanks so much for your reply but that won't help in my current situation. Maybe I didn't make it clear. The latest version of Quicktime as new as it sounds doesn't support screen recording on a powermac G5 Motorola chip with OS 10.5.8 which is the highest os I can go with that machine. If I can sync the two computers so I can get the application to record from my newer computer then I'm ok. I just don't have the recording application for audio that I'm using to demo for the website on the laptop as it's about 10,000 dollars. So, I have to use the older computer to do the audio presentation and try to get the newer computer synced to it so I can use the new version that works on snow leopard to record a screen shot that will hopefully appear on my laptop instead of the old machine. Hope that makes sense. It's a bit confusing but in a nutshell it's like this:
1. I am a Pro Tools Instructor which is the state of the art application and recording device for audio and movie scoring and I have a new job where I make small snippets of tips using Pro Tools which I'd like to record with quicktime on screen as they happen
2. the best version of Quicktime Pro available for the Power Mac, OS 10.5.8 will not do screen recording on it.
3. I can use the Quicktime application from my newer laptop but I need to sync it to the old machine
4. I'm hoping but I don't know, if I do this, that I can record Pro Tools in action from my new machine buy seeing it on this laptop screen and then recording it with the new quicktime.
5. If I can sync the two computers, I'm hoping this can happen but I can't use my ethernet connection as I have it used to connect to my recording console and can't afford to buy anything new like an ethernet hub yo connect the two so I'm hoping that there's another way to connect them.
I hope that makes sense and that possible you or someone else can help. Thanks so much! Scott

How to link Sales Order and WIP job for non-ATO items

Hello All,
My client's requirement is to link an Sales Order with a WIP Job as soon as it is booked.
It is for FG and for a non-ATO item.
The process should be to have SO booked and then it should raise a WIP job based on it if there ar no inventory stocks.
Thanks in advance.

You will have to write an extensive customization that will work similar to planning engine.
It will have to look at order quantity and then look at onhand, reserved onhand, min-max quantities, safety stocks, move orders etc etc and then create a job if necessary.
Are you sure you want to do it this way?
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

AS2 adpater-- Configuration details for both SND and RCV.

Hi All,
I need some details for both AS2 sender and receiver adapter.
Sender AS2 adapter :
1. Use Proxy
      Use Authentication
Which one we need to use?
2. what is this Proxy Realm or Authentication Realm??
3. Whether we need to enable Hostname check & HTTP keep alive? what is the purpose of these settings?
4. what is this Message subject ?? the content of this comes from the file name or file data?
5. Server certificate and private key authentication?? do we need to get these from partner system??
Receiver AS2 adapter :
1. Here also the same question when we need to use Proxy settings and when we need to use Authentication settings.
2. Dynamic attributes??
     Use dynamic attributes
     Use non-empty attributes.
What are the information we need to ask partner system to get the connection??
Please reply if anyone worked on these AS2 settings.
Thank You.
Regards
Krupakar.

hi..
Sender Adapter..
1.You can use both use proxy and use authentication.depends upon the requirement.
when you use proxy you have to give proxy server name and all parameters.That means proxy server acts like your actual server.To pass this data through the AS2 apdapter U hv to specify th following parameters.
Proxy Server : Your proxy server.
Proxy Port :The port of the proxy server.
Proxy User: User for optional authentication.
Proxy Password: Password for optional authentication.
Proxy Realm: Realm for optional authentication.
2. REALM
A realm is a part of Yanel which has its own configuration and repository. This allows you to run several subsites (which are independent of one another) in a single Yanel instance. For example, each department in your company can have its own realm. This allows one department to use its database as a content repository and another to use the filesystem to provide the content to Yanel
So proxy realm means u r authorized to use the proxy server
You use Use Authentication for -
>Used to enable/disable basic authentication.
Use Authentication Used to enable/disable basic authentication.
User: User for basic authentication.
Password: Password for basic authentication.
Realm: Realm for basic authentication.
3. if u check these options for the following purpose.
SSL Hostname Check: Validate common name with server name.
HTTP Timeout:Timeout in seconds for waiting for server
response.
4.Message Subject: This subject will be compared with the subject in the received message. This is used to find the
correct channel for the inbound message. Wildcards are allowed.Its the file data.
5. Your partne rwill provide u these details.
Receiver Adapter:
1.If u use the same in sender side then u hv to verify it again in the receiver system. Then only the communication is established.
3.u must have the AS2ID and the certificates.
THAnks
MAnas
reward points if helpful.

Reason and details for Deactivation of Event linkage in Production

Hi Friends,
Recently I have come across Event deactivation For AP invoice, Vendor Creation and Customer Creation workflows in Production, I have checked further and found that those are set as deactivate event linkage as default system behavior.
So that mean when ever an error will occur while event triggering then linkage will be disabled by the system.
Correct me if I am wrong.
So friends, my big doubt her is that What all are can be the reasons for that system error?
*And How I can get details for those errors? *
Regards
Dev

Hi,
While defining the Event linkage in SWETYPV ->
When ever u click on Business object it will open one new window ->
In that window -> There are four options to define in the field
Behaviour upon Error Feedback -> system defaults
                                                  Deactivation of linkage
                                                  Mark linkage as having errors
                                                  Do not change linkage
if the linkage is not activated as per the syatem defaults ( when ever error occurs)
You need to specify the type as -> Do not change linkage
Please check the four options once u will come to know the difference.
And also please check the following link
[http://mailman.mit.edu/pipermail/sap-wug/2004-October/014617.html]
Edited by: vijayareddy on Jun 1, 2009 11:56 AM

File content conversion - sender adapter for Header and detail records

Hi Experts,
I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
Thanks
Deepak

Hi
Refer the below fourm link,
Flat file whitout id
Regards
Ramg.

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

I updated my payment option details for app store and was charged with Rs. 60 twice. why did that happen?

i changed my app store from canada to india and for that i'd to update my payment option details for app store and was charged with Rs. 60 twice. once the day i added the card details. and then another one 3 days later. why did that happen?
i read soemwhere that it automatically gets credited back within 3-5 working days.
waited for more than 7 days but no credit was given back.
m feeling bad that i got charged without making any purchase.

Each time that you add or change the card details on your account (and possibly also if you change your name and address, as the card needs to be registered to the same name and address as on your iTunes account) you will be charged a temporary store holding charge to check that the card details are valid and that the card is active, but it should disappear within a few days or so (the amount of time that it takes will vary by card issuer) : store holding charge.
Give it a few more days, and if it still hasn't disappeared then try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Query to get the details of Blocking and deadlock occurred for the Day

Hi,
I need a query to get the details of blocking and deadlock occurred for the day.

You havent specified which version of SQL you are using which makes it difficult to give a solution. Assuming its latest versions , by default SQL Server (in any versions) doesnt track blocking information.
You need to run some kind of queries/traces to capture blocking. The same goes with Deadlocks where majority of the DBA's enable trace flag 1222/1205 when they suspect deadlocks happening.
Check this link -
http://dba.stackexchange.com/questions/10644/deadlock-error-isnt-returning-the-deadlock-sql/10646#10646
This link gives code to get historic deadlock information. I havent used it , I just googled to get that.
That being said if you are looking for something to capture for the future check the below links.
Check these links on how to setup extended events to capture deadlock and blocking.
http://sqlblog.com/blogs/jonathan_kehayias/archive/2010/12/21/an-xevent-a-day-21-of-31-the-future-tracking-blocking-in-denali.aspx
http://blogs.msdn.com/b/sqlserverfaq/archive/2013/04/27/an-in-depth-look-at-sql-server-memory-part-2.aspx
http://blogs.technet.com/b/mspfe/archive/2012/06/28/how_2d00_to_2d00_monitor_2d00_deadlocks_2d00_in_2d00_sql_2d00_server.aspx
HTH
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Details for Archived PR and PO

Hi,
I did archiving for PR and PO, but in retrieval I am not getting the detailed data such as Header Text (ie.in archived file).
The requirement of the client is that they want all the data which we see in display mode of PR or PO.This is in version 4.6C.
Also in archived PO the details tab,purchase history tab is not available.
Please give the suggestion as soon as possible.
Thanks & regards,
Goraksh Dhikale.

Looks like you archived without doing the most important step: checking OSS for program fixes.
I learned that Archving became more important in the last few years. Hence it is much more used than in the early yeaars, hence more program errors are found by the users.
check OSS note 516420 - ME23N: Texts are missing in archived purchase orders
and 307280 - No long texts for archiving object MM_EKKO

Configuration Details for GL account, Fund and Funds center

Hi All
I am executing budget report by using FMRP_RFFMEP1FX. In this report shows the fundcenter wise invoice details. As I execute the report with different fund center I am getting different output that is not match with actual one for that I want to know which transaction code maintains the fund, Fundcenter configuration details.
1. Which transaction code maintained GL, FUND and Fund center configuration?
2. In SPRO where to find the fund and fundcenter configuration details.
Please let me know
Thanks & Regards
KRISHGUNA

In SPRO go to Public Sector Management to find the configuration details for Funds Management.
Thanks and regards
Kedar

Db13 No Detail for Brbackup and Brarchive job

Similar Messages

Maybe you are looking for