.dbc file significance

When I start working on the Anil Passi's tutorial for OAF framework, there is a mentioning for .dbc file..What is the significance for this file?
I saw in my local desktop
ap607sdb_fwk11i.dbc..Can I use this for learning through ANil Passi's lessons?
thanks
prasanna

Prasanna,
DBC contains the details of Host, Port & SID. Which helps in validating the session. You need to pick the correct .DBC file for connecting with the DB.
As mentioned by Hussien you can pick the .dbc file from $FND_TOP secure folder.
Thanks
--Anil

Similar Messages

How to parse CAN DBC file through CVI

Hi ,
I would like to know if we can parse the CAN .dbc file through CVI, let me know if there is any other approach, We use Labwindows CVI for our testing and we would like to know if we can parse through the .dbc file to get the PGN and SPN information and use them in our testing process. We do not use NI CAN cards etc we use a Supercom to transmit and recieve the messages.
Thanks in Advance
Kishore

AndreasS wrote:
Hi Kishore,
you can use the NI-CAN or NI-XNET functions to read data from .dbc files. XNET is more advanced, but so far you can't to frame to channel conversion without hardware (coming soon).
So I recommend using NI-CAN. There you can read the channel information fom the dbc file using CAN Get Names and CAN Get Property.
You can convert the CAN channels into frames using either the virtual CAN interfaces 256 and 257 (both c and LabVIEW) or using the CAN Channel to Frame conversion library (only LabVIEW). Then you just have to write the frame data on your CAN interface.
NI-CAN manual
NI-XNET manual
NI-CAN Virtual Ports
Regards,
When you say "coming soon", when is this anticipated to be out? Also, can you use virtual CAN channels with XNET like you can with NI-CAN?
I'm trying to determine whether I should write all my new programs using XNET instead of NI-CAN, so anything you can contribute would be appreciated. Also, is there a significant reason to use XNET instead of NI-CAN if I'm only using CAN and don't care about FlexRay or other protocols?
Message Edited by KavehV on 03-22-2010 05:48 PM

RW-00023: Error: DBC file was not created- When try to install 11i on OEL5

I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
DBC File Check
RW-00023: Error: - DBC file was not created:
File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
HTTP Check
checking URL = http://oracleapp1.srini.co.uk:8000
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi JD,
I am able to fix this issue.....:-) Thanks for your help JD.
As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
above issue in the instalation of oracle 11i on OEL5
--Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
(db tier)
<DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
(apps tier)
<APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
--run the autoconfig in apps tier with completed successfully result (and also generated the DBC files)
--run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
--This time everything checked OK in the instalation wizard.

Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3

Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejith

Welcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini

How to identify the location of .dbc file in Oracle Apps ?

Hi Guys,
I'm looking for some system property to identify the exact .dbc file's location using my java program so that I can fetch the jdbc url to make a jdbc connection.
I know we can get it from $FND_SECURE but there may be a possibility of two or multiple files in the location some times.
My problem is I need to get the APPS_JDBC_URL from the dbc file to establish the connection to my db.
Help appreciated.
Thanks,
Raghu.

Hi,
If want the file directory name to be captured in the BPEL process then add <element name="directory" type="string"/> in the inbound or outbound adapter header wsdl file. Then declare a variable of the header message type and in the 'adapter' tab of the receive or invoke activity select that variable which you previously created.
Hope this helps.
Rdgs.

How to extract Attribute Value from a DBC file with LabWindows and NI-XNET library

Hi all,
For my application, i would like to feed my LabWindows CVI Test program with data extracted from *.dbc file (created by another team under Vector CANdb++).
These files contains all CAN frame definition
and also some extra information added to :
Message level,
Signal level,
Network Level
These extra information are set by using specific ATTRIBUTE DEFINITIONS - FUNCTIONALITY under Vector CANdb++
The opening of the DataBase works under NI-XNET DataBase Editor as in LabWindows using: nxdbOpenDatabase ( ... )
No attribute seems be displayable under the NI-XNET DataBase Editor (it's not a problem for me)
Now, how, using the NI-XNET API and CVI, be able to extract these specially created attributes ?
Thanks in advance.
PS : In attached picture, a new attribute called Test_NI, connected to a message
Attachments:
EX1.jpg ‏36 KB

Hi Damien,
To answer your question on whether the XNET API on LabWindows/CVI allows you to gain access to the custom attributes in a DBC file, this is not a supported feature. The DBC format is proprietary from Vector. Also, custom attributes are different for all customers and manufacturers. Those two put together make it really difficult for NI to access them with an API that will be standard and reliable.
We do support common customer attributes for cyclic frames. This is from page 4-278 in the XNET Hardware and Software Manual :
"If you are using a CANdb (.dbc) database, this property is an optional attribute in the file. If NI-XNET finds an attribute named GenMsgSendType, that attribute is the default value of this property. If the GenMsgSendType attribute begins with cyclic, this property's default value is Cyclic Data; otherwise, it is Event Data. If the CANdb file does not use the GenMsgSendType attribute, this property uses a default value of Event Data, which you can change in your application. "
Link to the manual : http://digital.ni.com/manuals.nsf/websearch/32FCF9A42CFD324E8625760E00625940
Could you explain us the goal of this attribute, and what you need it on your application.
Thanks,
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France

Can I store a DBC file inside a exe?

I have a progaram that I turned into a executable that works fine except that I have to include a DBC file for the XNET sessions that are used in the program. The problem is that I don't want anyone to find the external DBC file.
So the question is if there is a way to put the DBC file into the VI so there is no way to see what it contains?
I found the example CAN Dynamic Database Creation.VI, which could work for a low channel count. My DBC file has 14 messages with over 60 signals, not impossible but I would rather not do it by hand. I only display about 25 signals on the front panel but I record all of them in a data file.
Any good ideas on how to go about doing this?

Bryan,
Dynamic database creation is the best solution to this problem. Even if you were to include the DBC file in your EXE build, it would store the DBC file in a data folder created along with the executable, which would be available to anyone browsing through that file structure. I suppose the file could be converted to binary and included, reconstituted to a DBC by your VI and then be destroyed upon program completion. However, the DBC file would still be accessible at some file path during program execution. By far the safest and most straightforward way to handle this is to dynamically create the database.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Dbc file and Jsp error

Dear all,
I am trying to do multinode installtion on AIX 5.3 HACMP . During post installation i am getting this error.
Dbc file and Jsp error
Updating Server Security Authentication
java.sql.SQLException: Io exception: Invalid number format for port number
Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
Updating Server Security Authentication failed with exit code 1
adgendbc.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
SQLPLUS Executable : /mglapp/oramgl/mglora/8.0.6/bin/sqlplus
SP2-0642: SQL*Plus internal error state 2165, context 4294967295:0:0
Unable to proceed
ERRORCODE = 1 ERRORCODE_END
Thanks in advance

Maybe you have problem with the date format, please ensure that NLS_DATE_FORMAT env variable is set to a valid value.
Please view SP2-0642: Sql*Plus Internal Error State 2165, Context 4294967295:0:0 Doc ID: Note:396154.1.
Hope it helps.
Adith

How to configure the jdeveloper 11 with .dbc files?

hi, all
i am a new bie here. 4 jdeveloper 10, i can configure the .dbc files at project setting, while 4 jdeveloper 11, it's totally different. i can't find any place to configure it. How to configure the .dbc in jdeveloper 11?
Regards,
Chelsea

You cant use jdev 11g for OAF development..
You need to download the jdeveloper patch from metalink to develope OAF objects.
Refer this metalink note to find the correct version of jdeveloper that you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
--Prasanna

DBC file error while runing PG.xml in jdeveloper

HI
1) I have installed Oracle database 10g on my local machine at location C:\oraclexe
2) Now I have installed Jdev 10G on my local machine at location C:\Jdev10gOAF
3) I have set the env variable JDEV_USER_HOME = C:\Jdev10gOAF\jdevhome\jdev
4) Now I want to start with OAF Tutorials present in my Jdev at location C:\Jdev10gOAF\jdevhome\jdev\myprojects
5) I have opened the toolbox.jws file in Jdev and it has loaded all the projects ExtendLabSolutions.jpr, LabSolutions.jpr,LabSolutions.jpr,Tutorial.jpr
6) Now Problem comes here when I try to run the HelloWorldPG.xml
Jdev is giving the error:
"The DBC Filename Field in the Runtime Connection is not specificed. To run OAF, you must specify a DBC file name."
7) I know that we need to give the dbc file name in runtime options of the project in Jdev , but the issue is from where should I get the DBC file for the Oracle database that I have installed locally on my system as mentioned in poitn 1.
Any help on setting up Jdev .
Thanks

I am not sure where this file is stored in 10g but you can create DBC file by your own. Below is a sample file content. Change the content as per your server and save the file as DBC.
In oracle apps, I think this file can be found in $FND_TOP
I will tell you exct locations tomorrow.
#DB Settings
#Thu Oct 16 11:13:12 IST 2008
GUEST_USER_PWD=GUEST/ORACLE
APPL_SERVER_ID=595952B22AD32F0DE040A8C09464338D18426369623970520232270129039383
FND_JDBC_BUFFER_DECAY_INTERVAL=300
APPS_JDBC_DRIVER_TYPE=THIN
FND_JDBC_BUFFER_MIN=1
GWYUID=APPLSYSPUB/PUB
FND_JDBC_BUFFER_MAX=5
APPS_JDBC_URL=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=server_name)(PORT=1526)))(CONNECT_DATA=(SID=vis1)))
FND_JDBC_STMT_CACHE_FREE_MEM=TRUE
FND_JDBC_STMT_CACHE_SIZE=0
TWO_TASK=vis1
FND_MAX_JDBC_CONNECTIONS=500
FND_JDBC_USABLE_CHECK=false
FNDNAM=APPS
FND_JDBC_PLSQL_RESET=false
DB_PORT=1526
FND_JDBC_CONTEXT_CHECK=true
FND_JDBC_BUFFER_DECAY_SIZE=5
DB_HOST=server_name

Problem in accessing CAN daabase (.dbc) file using GetChannelNamesByID.vi

Hello,
I am using PCI CAN/2 series2 card to read data from sensor. In my labview code i m using FrameToChannel conversion API to convert the frame data into actual values using a .dbc file. My software includes data logger and visualization of sensor data. I have to run this software contineously for 30 days and monitor and log the sensor data.
My problem is the GetChannelNamesByID.vi is not working properly. My data logger works fine(i.e. rading and logging sensor data) but the visualization of actual sensor data using FrameToChannel conversion library stops sometimes. My software can not read the channels from the database file. it happens randomly e.g. after 12 hours. I have to stop the software and run it again so that it works fine.
Can anyone give me the reason and solution for this?
Thanks in advance.
Solved!
Go to Solution.

My 2 cents. Don't use the Frame to Channel Conversion Library. It hasn't been updated in 5 years and likely won't be updated again. I had problems with it where it wasn't converting correctly, and where it had issues with having the same signal names in different frames. I is supposed to support it with a dot notation but it some times just doesn't work.
I contacted NI about it and they agreed there was a problem, especially with the frame to channel conversion. I provided a frame, the DBC, and showed the signal it converted it to was wrong. Their suggestion was to use the XNet conversion. After switching to using the XNet conversion (which doesn't need XNet hardware) I would never want to go back. There is so much more flexibility in the API and it is activly being supported.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Dbc file not generating

Hi all,
Oracle application log in screen is not displaying .i checked in backend . after that i did not change any thing.
After that i have run autoconfig.after that i have seen again
DBC file is not generating when i was running autoconfig?

I am unable to paste the log file.can u give me u r mail id .i am uploading the log file.to u r id.
E:\oracle\viscomn\admin\scripts\VIS_vanwin23>call "e:\oracle\visappl\APPSORA.cmd"
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:35 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Error returned while running mwamscasvc.cmd
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\cn\11.5.0\admin\driver\cntmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CN_TOP
instantiate file:
source : e:\oracle\visappl\cn\11.5.0\admin\template\cnadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cnadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\cn\11.5.0\admin\template\cnadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cnadmprf.cmd
setting permissions: 700
instantiate file:
source : e:\oracle\visappl\cn\11.5.0\admin\template\cncmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cncmprf.sql
instantiate file:
source : e:\oracle\visappl\cn\11.5.0\admin\template\cncmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cncmprf.cmd
AutoConfig Profile Phase
Running Profile Process 1 of 2 for CN_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\cnadmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:36 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running cnadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Profile Phase
Running Profile Process 2 of 2 for CN_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\cncmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
" CN_TOP : e:\oracle\visappl\cn\11.5.0"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:36 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running cncmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\csi\11.5.0\admin\driver\csitmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSI_TOP
instantiate file:
source : e:\oracle\visappl\csi\11.5.0\admin\template\csiadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csiadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\csi\11.5.0\admin\template\csiadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csiadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for CSI_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\csiadmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:37 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running csiadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\wip\11.5.0\admin\driver\wiptmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for WIP_TOP
instantiate file:
source : e:\oracle\visappl\wip\11.5.0\admin\template\wipadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\wipadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\wip\11.5.0\admin\template\wipadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\wipadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for WIP_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\wipadmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:37 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running wipadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\cse\11.5.0\admin\driver\csetmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSE_TOP
instantiate file:
source : e:\oracle\visappl\cse\11.5.0\admin\template\cseadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cseadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\cse\11.5.0\admin\template\cseadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cseadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for CSE_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\cseadmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:38 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running cseadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\eam\11.5.0\admin\driver\eamtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for EAM_TOP
instantiate file:
source : e:\oracle\visappl\eam\11.5.0\admin\template\eamadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\eamadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\eam\11.5.0\admin\template\eamadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\eamadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for EAM_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\eamadmprf.cmd
script returned:
E:\oracle\viscomn\admin\scripts\VIS_vanwin23>echo off
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:39 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running eamadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\imt\11.5.0\admin\driver\imttmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IMT_TOP
Processing DriverFile = e:\oracle\visappl\fte\11.5.0\admin\driver\ftetmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for FTE_TOP
instantiate file:
source : e:\oracle\visappl\fte\11.5.0\admin\template\fteadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\fteadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\fte\11.5.0\admin\template\fteadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\fteadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for FTE_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\fteadmprf.cmd
script returned:
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:39 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running fteadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
The process tried to write to a nonexistent pipe.
.end err out.
Processing DriverFile = e:\oracle\visappl\ont\11.5.0\admin\driver\onttmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for ONT_TOP
instantiate file:
source : e:\oracle\visappl\ont\11.5.0\admin\template\ontadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ontadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\ont\11.5.0\admin\template\ontadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ontadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for ONT_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\ontadmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:40 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running ontadmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\ar\11.5.0\admin\driver\artmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AR_TOP
instantiate file:
source : e:\oracle\visappl\ar\11.5.0\admin\template\aradmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\aradmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\ar\11.5.0\admin\template\aradmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\aradmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AR_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\aradmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:40 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running aradmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\ahl\11.5.0\admin\driver\ahltmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AHL_TOP
instantiate file:
source : e:\oracle\visappl\ahl\11.5.0\admin\template\ahladmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ahladmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\ahl\11.5.0\admin\template\ahladmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ahladmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AHL_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\ahladmprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:41 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running ahladmprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\ozf\11.5.0\admin\driver\ozftmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for OZF_TOP
instantiate file:
source : e:\oracle\visappl\ozf\11.5.0\admin\template\ozfadprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ozfadprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\ozf\11.5.0\admin\template\ozfadprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\ozfadprf.cmd
AutoConfig Profile Phase
Running Profile Process 1 of 1 for OZF_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\ozfadprf.cmd
script returned:
Sun 09/06/2009
11:22 AM
ECHO is off.
ECHO is off.
Sun 09/06/2009 11:22 AM
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual C++ tools.
APPSORA.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : e:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : C:\VC6\msdev98\BIN;C:\VC98\BIN;C:\VC6\TOOLS\WINNT;C:\VC6\TOOLS;e:\oracle\visappl\au\11.5.0\bin;e:\oracle\visappl\fnd\11.5.0\bin;e:\oracle\visappl\ad\11.5.0\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;e:\oracle\visora\iAS\Apache\perl\5.00503\bin\MSWin32-x86\;e:\oracle\viscomn\util\unzip\unzip;e:\oracle\visora\8.0.6\bin;e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;C:\mksnt;C:\WINDOWS;C:\WINDOWS\system32"
" LD_LIBRARY_PATH : e:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\lib;e:\oracle\visora\8.0.6\lib;e:\oracle\visappl\cz\11.5.0\bin;e:\oracle\visora\8.0.6\lib"
"Running SQL script "
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Sep 6 11:22:41 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
"Error returned while running ozfadprf.cmd"
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = e:\oracle\visappl\ies\11.5.0\admin\driver\iestmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IES_TOP
instantiate file:
source : e:\oracle\visappl\ies\11.5.0\admin\template\cooper.cmd
dest : e:\oracle\visappl\ies\11.5.0\admin\install\VIS_vanwin23\cooper.cmd
backup : e:\oracle\visappl\ies\11.5.0\admin\install\VIS_vanwin23\cooper.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\cooper.cmd
Processing DriverFile = e:\oracle\visappl\csd\11.5.0\admin\driver\csdtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSD_TOP
instantiate file:
source : e:\oracle\visappl\csd\11.5.0\admin\template\csdadmprf.sql
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.sql
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.sql to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csdadmprf.sql
setting permissions: 600
instantiate file:
source : e:\oracle\visappl\csd\11.5.0\admin\template\csdadmprf.cmd
dest : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.cmd
backup : e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.cmd to e:\oracle\visappl\admin\VIS_vanwin23\out\09061121\csdadmprf.cmd
setting permissions: 700
AutoConfig Profile Phase
Running Profile Process 1 of 1 for CSD_TOP
Executing script in InstantiateFile:
e:\oracle\viscomn\admin\install\VIS_vanwin23\csdadmprf.cmd

How can we cretae the DBC file?

Hi all,
I am attempting to run the test_fwktutorial.jsp within the toolbox.jws/Tutorial.jpr project in Jdeveloper . We have to provide the Oracle application DB connection in the project properties ( we have to provide this as a DBC file) . How can we create the dbc file from the Database connection ? i tried to export the DB connection in Jdev , but it is getting exported to xml file rather than dbc file . Please help to fix this

Yes, you can do that.
Put both the DBC files under dbc_files\secure folder.
You can change the dbc files from project settings and point to the desired file.
I am not sure, but maybe you need to stop JDevloper and start again for the new DBC file to take effect.

How can we create the DBC file?

Hi all,
I am attempting to run the test_fwktutorial.jsp within the toolbox.jws/Tutorial.jpr project in Jdeveloper . We have to provide the Oracle application DB connection in the project properties ( we have to provide this as a DBC file) . How can we create the dbc file from the Database connection ? i tried to export the DB connection in Jdev , but it is getting exported to xml file rather than dbc file . Please help to fix this.

Yes, you can do that.
Put both the DBC files under dbc_files\secure folder.
You can change the dbc files from project settings and point to the desired file.
I am not sure, but maybe you need to stop JDevloper and start again for the new DBC file to take effect.

OAF DBC File in 10g JDeveloper

Hi,
I'm trying to create OAF page on JDeveloper 10g.
I'm using online tutorials for learning, I came across "DBC file Name", "User Name & Password" while creating new workspace & new project.
"User Name & Password" => should i use Database login details.
Could you tell me what this DBC file is & from where i have to select this file.
Also, I see "Application Short Name" & "Responsibility Key" under Responsibility tab in the same window of above.
Could tell me how can i get these values for above columns.
Thanks

Hi,
Refer below link:
http://sushantsharmaa.blogspot.in/2012/09/jdeveloper-setup-for-oa-framework.html
--Sushant

.dbc file significance

Similar Messages

Maybe you are looking for