DBM labor cost in the pricing

Dear Friends,
We plan to use DBM Time Management . When the technician clocks in time, the labor cost hits the internal order correctly. But, the same cost doesn't hit my labor cost condition type in the pricing. Due to this, my profit center in the billing is wrong.
What am I missing here? Couldnt find any documentation regarding this
Appreciate your help
Best regards,
Shafi

Hi
if you want to have your profit margin on the SD order 100% accurate this is the only way but this will have a big impact on performance. As normally labor rates don´t differ so much I would recommend to create a condition type where you maintain the average labor rate. This gives you a profit margin as well but not as accurate.
In CO PA you get the right figures but normally you don´t do this order level
regards
Stephan

Similar Messages

EBP - creating header pricing to Order and splitting the cost to the items

Hello all,
I need a "cookbook" to create header pricing in the Order automatically according to customer fields. The purpose is to add general costs to the items without user's intervention.
I also need a "cookbook" to split these costs from the header to the items automatially, so each order item receive the relational cost.
Any help would be appreciable
Thanks
Isaac

Dear Poster
Your thread has had no response since it's creation over
1 year ago, therefore, I am closing the thread.
Should the issue still be outstanding please create a new thread in the relevent forum.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Labor cost

Hello ...I'm Jun from Korea!! I use to get some useful information through your advice~~~
Again ~~~~ I would like to ask someting to you ~~~
we use P000 condition type as a purchase price~~~
and I want to konw, is there a condition type for labor cost ?
I want to control the labor cost by Material~ (Purchasing Material Case)
(but It should not be effected to PO) only for some specific Roport for calculation someting ...
So, If it is, I'll register all labor cost by material and make some Report for our purpose.....
Please give some advice for me~~~
Thanks ~~~

Hi,
You can use standard condition type 01BE - Gross Price Contract or 01CT- Price (Contract/Bid) and same you can configure in Pricing procedure (M/08) while creating PO you can use these condition type.
Or you can copy the stand P000 and rename and configure in Pricing procedure (M/08) it will works.Hope this helps you
Regards

COGS (Cost of the Goods Sold) in OPM reg.

Hi
Can anyone provide the details about COGS (Cost of the goods sold) documents/set up in R12.
This is very urgent.
Kindly do the needful.
Mail id : [email protected]
Regards
Raj

Hi,
1. Cost of manufacture of a Product is what the value of goods sold or Cost of Goods sold (COGS). Either, you use the SAP Costing module (CO-PC) to let SAP determine COGS or you can manullay input COGS into material master fields (Standard or Moving Average) in Accounting view of Material master. In either case, COGS is stored in the material master valuation (Accounting) view.
2. You mean in a COGS? Whatever costs it takes to manufacture a product is included in COGS, for instance Material cost, Labor cost etc.,
Hope this helps.
PS: There is lot of documentation available online SAP help protals and please refrain from using this forum for asking such basic questions and restrict to only questions of clarificatory in nature or issue based questions.
Make an effort to read the SAP help documentation for all your basic questions.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Mods (Moderators) will lock your threads, if you continue to ask such basic questions, so no one can reply to it.
Edited by: Pradeep kumar Athmakur on Feb 27, 2010 12:41 AM

Excise duty in the Pricing Procedure for Local Purchase / Importation

Hi,
I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
Local purchase: the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us.. My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
Importation: the vendor only bills us the cost of the material. When we received the fuel, we paid ED tax to local tax authorities.
I know that both in these scenarios, the system has to determine the excise duty.
My questions are (1) how do you set up the excise duty condition type in the pricing procedure(or do they have to be maintained in the pricing procedure?) ? and (2) how do you set up this condition type in the config?
Thank you and hoping for your immediate feedback.
zccr

Hi,
You can use same pricing procedure
put 4 in subtotal in pricing procedure against the Discounr or freight cond
and in taxinn
BASb ALTCBV 362 and for jmop 363
But this will work only if same discount or freight value is in IV as that given in PO
if freing value changes in IV then its a problem
This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
other solution
in taxinn create tax code like v8 vat 4% for 003 tax clasification
in ftxp create tax code V8 desc vat 4%
in fv11 for jvrd put 4
and at the time of IV put this tax code for freight amount
and for regular material value V1 tax code
this will work only if u have used acess seq MWST instead of JTAX pr JST1
hope this helps
Vipin

Cost of the goods

Dear Forum,
When the goods issue to order or cost center, the cogs debited and inventory credited.
1 May I know when is the cost being calculated so that when the time I do GI, the system know how much to post.
2 Normally how many kind of cost included?
Thanks

Hi,
1. Cost of manufacture of a Product is what the value of goods sold or Cost of Goods sold (COGS). Either, you use the SAP Costing module (CO-PC) to let SAP determine COGS or you can manullay input COGS into material master fields (Standard or Moving Average) in Accounting view of Material master. In either case, COGS is stored in the material master valuation (Accounting) view.
2. You mean in a COGS? Whatever costs it takes to manufacture a product is included in COGS, for instance Material cost, Labor cost etc.,
Hope this helps.
PS: There is lot of documentation available online SAP help protals and please refrain from using this forum for asking such basic questions and restrict to only questions of clarificatory in nature or issue based questions.
Make an effort to read the SAP help documentation for all your basic questions.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Mods (Moderators) will lock your threads, if you continue to ask such basic questions, so no one can reply to it.
Edited by: Pradeep kumar Athmakur on Feb 27, 2010 12:41 AM

Selling price in the Pricing procedure

In my implementation the company is arriving at the selling price like this:-
Basic GLP Price 100
Freight & Insurance @5% 5.00
Sub Total 105.00
Exchange to INR @ 1Euro=Rs.1.00(For ex.) 105.00
Loading 1% 1.05
***. Value 106.05
Basic Customs Duty at 15 % 15.91
Sub Total 121.96
CVD 16% 19.51
Cess on CVD 2 % 0.39
Sub Total 141.86
Total Duty 35.81
Cess on Total Duty 2% 0.72
Clearing Charges 1% 1.42
TOTAL COST ( CIF + C DUTY+ CVD+ CESS +CL CHRG) 142.95
Sub Total cost without CVD 123.04(Selling price)
I want this selling price to be picked up once I punch in the material part no. in my sales order. Can I get this selling price directly without using the pricing procedure? Can I hardcode the selling price or can i use some selling price simulation? Since the data to arrive at the selling price is dynamic is it advisable to hardcode the SP or to use different condition types to arrive at this selling price?

Hi Arindam,
It is advisable to create a new condition type so that in future it will be useful for the reporting purposes related to sales order documents.
Othewise you can write a exit ( Requirement/ Formula etc ), and do the calculation part for the selling price what you have mentioned in any of the mandatory condition type which you are using in sales orders, so that selling price value will always get populated.
Thanks
Lakshman

Downloading the pricing procedure

Hi Gurus,
I am new to the Middleware.
I have defined the new pricing procedure in ECC 6 and I require downloading the same pricing procedure to CRM 5. What are the initial objects I have to us for initial download?
I have used the following things in the pricing procedure
     56 Sales org. of order/plant Condition Table     Standard one
     PI02 Sales org/plant            Access Sequence      Standard one
     I have defined 6 condition types.
     I have created the condition records for the condition types that where in the pricing procedure.
Can any body help me out?
Thanks in advance.

Hi,
You told me that for the particular download use T.C - R3AR2 when I go there I found lot of objects but I am not sure which object i have to use? How to find the right object
If i want to download the Z00001 pricing procedure, 56 condition table , z001 to z10 condition table and condition records for the condition types.
I have also used the following things in the pricing procedure they are
In the subtotal column of the pricing procedure I have used
     1          Carry over value to KOMP-KZWI1
     A     Carry over price to KOMP-CMPRE (credit price)
     B     Carry over value to KOMP-WAVWR (cost)
In the requirement column of the pricing procedure I have use
     2     Item with pricing
     4     Cost
In the Condition formula for alternative calculation type column of the pricing procedure I have used
     2       Net Value
     11     Profit margin
Thanks in advance

User Exit / BAdI to update the pricing conditions of the Purchase Order

Hello SAPients,
This is my requirement:
"Copy the Pricing Conditions from the Shipment Cost Document (VI01 / VI02) to the automatically generated Purchase Order".
I'm using the enhancement V54U0002 (Function Module EXIT_SAPLV54U_002) to EXPORT the values of the Pricing Conditions to memory and I have used the enhancement MM06E005 ( FM EXIT_SAPMM06E_006, 007, 012, 013, 014, 016, and 017) to IMPORT the values from memory and store them in TKOMV. But, when the PO is generated the values don't stay, they are always changed with the standard PBXX pricing conditions.
My question is: Does anyone know the User Exit / BAdI that I can use to change the Pricing Conditions of the Purchase Order?
<<removed_by_moderator>>
Thanks!
Edited by: Vijay Babu Dudla on Jan 14, 2009 11:08 PM

>
kartik tarla wrote:
> check this badi
> ME_PROCESS_PO_CUST
>
> and the following user exit
> Goto-> include RV61AFZA then search for
> USEREXIT_PRICING_RULE see if its helpful to u.
Hello Kartik / SAPients,
I tried with ME_PROCESS_PO_CUST but didn't work. The system doesn't execute that code. Any other idea would be greatly appreciated.
Thanks.

Why is the price for the Single App subscription missing from the pricing page?

I'm trying to find out the cost of a Single App subscription at http://www.adobe.com/ca/products/creativecloud/buying-guide.html but the price is not being displayed:

Hi Ryan,
It appears the pricing might be broken for your region. I've reported the issue. Thanks for reporting it!
I think you might be able to get the pricing from here in the meantime:https://creative.adobe.com/plans
-Dave

Sales BOM distribute header cost to the subitems in the invoice

Hi all,
I have next BOM scenario in the invoice:
Header Item Sales Price: 0 Cost: 20
Subitem 1 Sales Price: 20 Cost: 0
Subitem 2 Sales Price: 20 Cost: 0
I can't move up the Sales Price of the subitems, because they are relevant for the pricing and the invoice.
I'd like to distribute the cost of the header item to their subitems.
It's possible? Perhaps with a routine in the copy control or an alternative calculation type in the Princing Procedure?
What I'd like to get is:
Header Item Sales Price: 0 Cost: 0
Subitem 1 Sales Price: 20 Cost: 10
Subitem 2 Sales Price: 20 Cost: 10
Thanks in advance

You can use T.code: COOIS if Product Costing has been configured for MTO scenario whcih gives the costing details.
You can also use To.code: KE30 if CO-PA implemented.
but if you want to link with billing, Please search for any reports in Sales information system.
One more you can create a ABAP Query Report using T.code: SQVI
Regards,
Anbu

Settling Labor costs

Hi Experts,
How do you settle any labor costs. I have created a secondary cost element and tied it an activity type. In the work order I enter 2 hours of this activity. Can I settle these costs from a secondary cost element to a primary one?
Thanks

HI,
once it is secondary cost you cannot bring it back to primary cost.
Best regards, Christian

Inventorising Additional Costs in Import Pricing

Dear Friends,
Can any body help me how to inventorise additional costs ( Freight, Insurance, Commission agent Charges etc.) in Import Purchase Pricing. Kindly help me on this regard.
Regards,
Ashok

Hi ,
while processing MIRO there is an option of adding an addtional cost to the inventory by making the entry in the material code tab. here you can post the cost on material directly .
In case if you want the same to be routed through Po then you will have to check the condition types and accordingly make the changes in OBYC , so that everytime your inventory is hit .
hope this helps .
Regards ,
Dewang T.

I can Billing shipment costs to the customer, But......

hi
I can Billing shipment costs to the customer, But i can't get an additional entry in the customer billing document.how to do? and could anyone help me?

In the Pricing procedure, add a condition type for Freights ( preferably Manual condition). In the calculation make it add to the Net Price.

How to add the purchasing overhead costs to the material costs

Hi,
I have a requirement to add the purchasing overhead costs like transportation costs to the material costs so that the costs is added to the material costs and update my material price accordingly.
Can u tell me how to do it for both standard price and MAP price?

Hi,
Please attach a accrual key in customization (Pricing procedure) to the overhead condition type you use.

DBM labor cost in the pricing

Similar Messages

Maybe you are looking for